Sunday, April 10, 2011

Antifoam T901 lubricant additive , additive

T901 Methyl silicon oil
Antifoam
lubricant additive
additive
Methyl silicon oil / supply qty:700 ton
Antifoam
lubricant additive
additive

METHYL SILICON OIL

T901

BRIEF INTRODUCTION
The product is primarily used in internal combustion engine oil, gear oil, hydraulic oil and hakko kogyo as defoamer. It also can be applied for demoulding, waterproof, anti-mold and insulation in the rubber, plastics and casting industry. It is colorless transparent thick liquid. The dosage is 5.0-20.0 mg/kg.

CHARACTERISTICS
Have high antifoaming effect
Good chemical stability
Small dosage
have serious impact on gas release

PRODUCT FEATURES AND TEST METHODS
ITEM
INDICE
TEST METHOD
Density (25°C), kg/m
3
965
GB/T1884
Flash Point (open cup), °C
≥303
GB/T267
Viscosity (25°C), mm
2
/s
102%
GB/T265
Solidifying Point, °C
≤-52
GB/T510
Refractive Index (25°C)
1.405
-
Viscosity-temperature Coefficient
0.60
-
TAN, mg KOH/g
≤0.02
GB/T264
Loss of Weight in Vacuum-heat, %
0.4
-
Dielectric Constant
≥2.7
GB/T5654

PACKING AND STORAGE
Packing: The product is packed in 15 liter metal drum (net weight: 15 kg/drum).
Storage: Please refer to SH/T0164, for transportation, storage and oil blending. Keep the temperature not higher than 60°C. For long-term storage the suggested temperature is lower than 50°C. The dry, clean and ventilating warehouse is recommended.

No comments:

Post a Comment