SKF general purpose industrial and automotive bearing grease

Excellent oxidation stability
Good mechanical stability
Excellent water resistance and rust inhibiting properties
SKF general purpose industrial and automotive bearing grease

LGMT 2 is mineral oil based lithium soap thickened grease with excellent thermal stability
within its operating temperature range. This premium quality, general purposes grease is
suitable for a wide range of industrial and automotive applications.

Main advantages:
Excellent oxidation stability
Good mechanical stability
Excellent water resistance and rust inhibiting properties

Typical applications:
Agricultural equipment
Automotive wheel bearings
Conveyors
Small electric motors
Industrial fans

Bearing operating conditions
Temperature
Medium
Speed
Medium
Load
Low to medium
Vertical shaft
o
Fast outer ring rotation
-
Oscillating movements
-
Severe vibration
+
Shock load or frequent start up
-
Low noise
-
Low friction
o
Rust inhibiting properties
+
+ = Recommended
o = Suitable
- = Not suitable

Available pack sizes
35 g
tube
200 g
tube
420 ml
cartridge
1 kg
can
5 kg
can
18 kg
can
50 kg
drum
180 kg
drum

Technical data
DIN 51825 code
K2K-30
NLGI consistency class
2
Soap type
Lithium
Colour
Red brown
Base oil type
Mineral
Operating temperature range, ºC (ºF)
-30 to 120 (-22 to 250)
Dropping point DIN ISO 2176, ºC (ºF)
180 min. (356 min.)
Base oil viscosity:

40 ºC, mm2/s
110
100 ºC, mm2/s
11
Penetration DIN ISO 2137:

60 strokes, 10-1 mm
265 - 295
100 000 strokes, 10-1 mm
+50 max. (325 max.)
Mechanical stability:

Roll stability, 50 hrs at 80 ºC, 10-1 mm
+ 50 max.
SKF V2F test
'M'
Corrosion protection:

SKF Emcor:
- standard ISO 11007
0 - 0

- water washout test
0 - 0

- salt water test (100% seawater)
0 - 1*
Water resistance

DIN 51 807/1, 3 hrs at 90 ºC
1 max.
Oil separation

DIN 51 817, 7 days at 40 ºC, static, %
1 - 6
Lubrication ability

SKF R2F, running test B at 120 ºC
Pass
Copper corrosion

DIN 51 811, 110 ºC
2 max.

(130 °C / 266 °F)
Rolling bearing grease life

SKF R0F test L50 life at 10 000 rpm, hrs
-
EP performance

Wear scar DIN 51350/5, 1 400 N, mm
-
4-ball test, welding load DIN 51350/4
-
Fretting corrosion

ASTM D4170 (mg)
-
Designation
LGMT 2/(pack size)
* Typical value