Slow Set AB Glue for Plastic

Slow Set AB Glue for Plastic
Suitable for:
Synthetic rubber, Hard plastic,
Ceramics, Wood,
Metal, Leather
Slow Set AB Glue for Plastic can be used to bond items made of wood, metal, fiberglass, ceramics, porcelain, rubber and most types of plastic and foam.

Prior to applying the resin to bonded surfaces, the surfaces should be thoroughly wiped clean of dirt, dried, and degreased.

Application instructions:
Cut off the tips of the two application nozzles with scissors or a knife.
Holding the syringe vertically with the application nozzles facing upwards; Holding the syringe over a clean, disposable, mixing tray to ensure that the compound does not drip onto unintended surfaces.
Squeeze an equal amount of resin and hardener onto the clean mixing surface.
Mix the compound thoroughly with a hard, clean, disposable item such as a coffee stir or chopstick.
Only mix the amount that will be used.
Apply the mixed compound to both surface that are to be bonded together.
You can adjust the bonded joint by applying adhesive thicker in 5 minutes. The joint will be hard and secure in one hour.
T
his resin becomes completely set after 24 hours following mixing and applying.