Zinc thread compound
use on tool joints, drill collars,
and all other rotary shouldered connections
C66 ZINC THREAD COMPOUND
Application:
FUKKOL C66 Zinc Thread Compound
Zinc Based Tool Joint and Drill Collar
Compounds are available in
four grades, each meeting all API and IADC material specifications. FUKKOL C66 Zinc Thread
Compound Zinc Base Compounds are made using the highest quality metallic zinc powder,
a premium petroleum base, and a FUKKOL C66 Zinc Thread Compound exclusive additive package
designed to provide unsurpassed protection to thread and shoulder surfaces.
FUKKOL C66 Zinc Thread Compound
HT are recommended for use on tool joints, drill collars,
and all other rotary shouldered connections
. They may be used in
deep or shallow drilling, on
hard formations, for directional drilling, or for breaking in new tool joints
. API and IADC
recommends a compound of from 40% - 60% metallic zinc for use on tool joints and on drill
collar connections.FUKKOL C66 Zinc Thread Compound is commonly used for shallow drilling and
on tool joints. It is also used on drill pipe as a storage compound. FUKKOL C66 Zinc Thread Compound
is the most widely accepted and used compound on the complete drill string. When a single compound
is used on drill pipe and drill collars it is most often FUKKOL C66 Zinc Thread Compound It may
also be used on rotary connections as a storage compound.
FUKKOL C66 Zinc Thread Compound is normally used for hard and deep formation drilling and on drill collars.
FUKKOL C66 Zinc Thread Compound is recommended for drilling in geothermal and other high temperature
formations. FUKKOL C66 Zinc Thread Compound Geothermal Grade is designed to resist the drying effects
associated with high temperature drilling. FUKKOL C66 Zinc Thread Compound Geothermal Grade is designed
to protect tool joints, drill collars and other rotary shoulder connections use in high temperature drilling conditions
thus assuring ease of breakout on the connection.
TYPICAL SPECIFICATIONS:
Base Thickener ---- 12 Hydroxy-Lithium
Base Oil Viscosity,
SUS @ 100EF D-445 940
SUS @ 210EF D-445 70
Worked Penetration D-217 290-310
Drop Point, EF (ASTM D-566) D-566 300
Flash Point, EF (ASTM D-92) D-92 430
Pour Point, EF (ASTM D-97) D-97 0
Brushability (minimum), EF ---- 15
Saturday, March 5, 2011
Zinc stearate
White powder,Insoluble in water,Water absorption in the air,PVC stabilizer and lubricant
Lubricant for cosmetics, lubricants and release agents for plastic products,softening of rubber lubricant, lighting agents for textiles, flat agents for paint and enamel and raw material for cosmetic
Free fatty acid
≤1
Acid valve fatty acids
195-206
Moisture
≤1
Sieve residue 325mesh
≤0.5
Bulk density
260-360
Melting point
115-125
Oxide
13.5-14.2
Soluble salts
≤0.1
Lubricant for cosmetics, lubricants and release agents for plastic products,softening of rubber lubricant, lighting agents for textiles, flat agents for paint and enamel and raw material for cosmetic
Free fatty acid
≤1
Acid valve fatty acids
195-206
Moisture
≤1
Sieve residue 325mesh
≤0.5
Bulk density
260-360
Melting point
115-125
Oxide
13.5-14.2
Soluble salts
≤0.1
Zinc stearate
White powder,Insoluble in water,Water absorption in the air,PVC stabilizer and lubricant
Lubricant for cosmetics, lubricants and release agents for plastic products,softening of rubber lubricant, lighting agents for textiles, flat agents for paint and enamel and raw material for cosmetic
Free fatty acid
≤1
Acid valve fatty acids
195-206
Moisture
≤1
Sieve residue 325mesh
≤0.5
Bulk density
260-360
Melting point
115-125
Oxide
13.5-14.2
Soluble salts
≤0.1
Lubricant for cosmetics, lubricants and release agents for plastic products,softening of rubber lubricant, lighting agents for textiles, flat agents for paint and enamel and raw material for cosmetic
Free fatty acid
≤1
Acid valve fatty acids
195-206
Moisture
≤1
Sieve residue 325mesh
≤0.5
Bulk density
260-360
Melting point
115-125
Oxide
13.5-14.2
Soluble salts
≤0.1
Zinc stearate
White powder,Insoluble in water,Water absorption in the air,PVC stabilizer and lubricant
Lubricant for cosmetics, lubricants and release agents for plastic products,softening of rubber lubricant, lighting agents for textiles, flat agents for paint and enamel and raw material for cosmetic
Free fatty acid
≤1
Acid valve fatty acids
195-206
Moisture
≤1
Sieve residue 325mesh
≤0.5
Bulk density
260-360
Melting point
115-125
Oxide
13.5-14.2
Soluble salts
≤0.1
Lubricant for cosmetics, lubricants and release agents for plastic products,softening of rubber lubricant, lighting agents for textiles, flat agents for paint and enamel and raw material for cosmetic
Free fatty acid
≤1
Acid valve fatty acids
195-206
Moisture
≤1
Sieve residue 325mesh
≤0.5
Bulk density
260-360
Melting point
115-125
Oxide
13.5-14.2
Soluble salts
≤0.1
[I] Polyanionic Cellulose (PAC)
high degree of substitution, good uniformity of substitution .
Petroleum grade Product features:
1, high degree of substitution, good uniformity of substitution .
2, high transparency, viscosity and water loss can be controlled .
3, suitable for fresh water, sea water, saturated brine slurry .
4, stabilize soft soil structure, prevent collapse of wall of a well .
5, can improve mud-making volum, reduce filteration loss .
6, has excellent performance in drilling of oil .
specification
Requirement
PAC-HV
PAC-LV
Appearance
Free-flowing powder
API filtrate volume:
At 0.57%(2ppb) of PAC concentration, ml
≤20
≤25
At 0.86%(3ppb) of PAC concentration, ml
≤15
≤15
At 1.14%(4ppb) of PAC concentration, ml
≤10
≤10
YP volume:
At 0.57%2ppbof PAC concentration
≥2.4Pa
(5 lb/100feet
2
)
≤0.5Pa
(1 lb/100feet
2
)
At 0.86%3ppbof PAC concentration
≥9.6Pa
(20
lb/100feet
2
)
≤1.0Pa
(2 lb/100feet
2
)
At 1.14%4ppbof PAC concentration
≥19.2Pa
(40 lb/100feet
2
)
≤1.5Pa
(3 lb/100feet
2
)
Petroleum grade Product features:
1, high degree of substitution, good uniformity of substitution .
2, high transparency, viscosity and water loss can be controlled .
3, suitable for fresh water, sea water, saturated brine slurry .
4, stabilize soft soil structure, prevent collapse of wall of a well .
5, can improve mud-making volum, reduce filteration loss .
6, has excellent performance in drilling of oil .
specification
Requirement
PAC-HV
PAC-LV
Appearance
Free-flowing powder
API filtrate volume:
At 0.57%(2ppb) of PAC concentration, ml
≤20
≤25
At 0.86%(3ppb) of PAC concentration, ml
≤15
≤15
At 1.14%(4ppb) of PAC concentration, ml
≤10
≤10
YP volume:
At 0.57%2ppbof PAC concentration
≥2.4Pa
(5 lb/100feet
2
)
≤0.5Pa
(1 lb/100feet
2
)
At 0.86%3ppbof PAC concentration
≥9.6Pa
(20
lb/100feet
2
)
≤1.0Pa
(2 lb/100feet
2
)
At 1.14%4ppbof PAC concentration
≥19.2Pa
(40 lb/100feet
2
)
≤1.5Pa
(3 lb/100feet
2
)
[I] Polyanionic Cellulose (PAC)
high degree of substitution, good uniformity of substitution .
Petroleum grade Product features:
1, high degree of substitution, good uniformity of substitution .
2, high transparency, viscosity and water loss can be controlled .
3, suitable for fresh water, sea water, saturated brine slurry .
4, stabilize soft soil structure, prevent collapse of wall of a well .
5, can improve mud-making volum, reduce filteration loss .
6, has excellent performance in drilling of oil .
specification
Requirement
PAC-HV
PAC-LV
Appearance
Free-flowing powder
API filtrate volume:
At 0.57%(2ppb) of PAC concentration, ml
≤20
≤25
At 0.86%(3ppb) of PAC concentration, ml
≤15
≤15
At 1.14%(4ppb) of PAC concentration, ml
≤10
≤10
YP volume:
At 0.57%2ppbof PAC concentration
≥2.4Pa
(5 lb/100feet
2
)
≤0.5Pa
(1 lb/100feet
2
)
At 0.86%3ppbof PAC concentration
≥9.6Pa
(20
lb/100feet
2
)
≤1.0Pa
(2 lb/100feet
2
)
At 1.14%4ppbof PAC concentration
≥19.2Pa
(40 lb/100feet
2
)
≤1.5Pa
(3 lb/100feet
2
)
Petroleum grade Product features:
1, high degree of substitution, good uniformity of substitution .
2, high transparency, viscosity and water loss can be controlled .
3, suitable for fresh water, sea water, saturated brine slurry .
4, stabilize soft soil structure, prevent collapse of wall of a well .
5, can improve mud-making volum, reduce filteration loss .
6, has excellent performance in drilling of oil .
specification
Requirement
PAC-HV
PAC-LV
Appearance
Free-flowing powder
API filtrate volume:
At 0.57%(2ppb) of PAC concentration, ml
≤20
≤25
At 0.86%(3ppb) of PAC concentration, ml
≤15
≤15
At 1.14%(4ppb) of PAC concentration, ml
≤10
≤10
YP volume:
At 0.57%2ppbof PAC concentration
≥2.4Pa
(5 lb/100feet
2
)
≤0.5Pa
(1 lb/100feet
2
)
At 0.86%3ppbof PAC concentration
≥9.6Pa
(20
lb/100feet
2
)
≤1.0Pa
(2 lb/100feet
2
)
At 1.14%4ppbof PAC concentration
≥19.2Pa
(40 lb/100feet
2
)
≤1.5Pa
(3 lb/100feet
2
)
Attapulgite Drilling Fluid
BOTU Attapulgite Drilling Fluid
API SEPC 13A Grade
High viscocity;
High adsorption;
More stable.
BOTU Attapulgite Drilling Fluid
Applications:
Attapulgite Drilling Fluid
requires mechanical shear and agitation for maximum viscosity. It is not a hydratable clay and does not swell by adsorbing water to create viscosity. Salt Gel provides viscosity by the physical nteraction of its rod-like particles.
A high-fluid-loss, Salt Gel squeeze can be formulated for combating lost circulation. It can be spotted opposite the loss zone, and light squeeze pressure can be applied to deposit a high concentration of solids. For bridging larger fractures effectively, fibrous and/or granular lost-circulation materials can be incorporated into the slurry. Salt Gel slurries can be formulated in fresh or salt water and can be weighted or unweighted.
Technical Specifications:
Item/Model
BT-Z-01
BT-Z-02
Appearance
Powder
Powder
Size(mesh)
40-80
40-80
Viscometer dial reading at 600 r/min
≥30
≥23
Viscometer dial reading at 300 r/min
≥24
≥18
Residue of diameter greater than 75 μm
≤8%
≤8%
Moisture(%)
≤15
≤15
API SEPC 13A Grade
High viscocity;
High adsorption;
More stable.
BOTU Attapulgite Drilling Fluid
Applications:
Attapulgite Drilling Fluid
requires mechanical shear and agitation for maximum viscosity. It is not a hydratable clay and does not swell by adsorbing water to create viscosity. Salt Gel provides viscosity by the physical nteraction of its rod-like particles.
A high-fluid-loss, Salt Gel squeeze can be formulated for combating lost circulation. It can be spotted opposite the loss zone, and light squeeze pressure can be applied to deposit a high concentration of solids. For bridging larger fractures effectively, fibrous and/or granular lost-circulation materials can be incorporated into the slurry. Salt Gel slurries can be formulated in fresh or salt water and can be weighted or unweighted.
Technical Specifications:
Item/Model
BT-Z-01
BT-Z-02
Appearance
Powder
Powder
Size(mesh)
40-80
40-80
Viscometer dial reading at 600 r/min
≥30
≥23
Viscometer dial reading at 300 r/min
≥24
≥18
Residue of diameter greater than 75 μm
≤8%
≤8%
Moisture(%)
≤15
≤15
[I] Polyanionic Cellulose for oil drilling
Polyanionic cellulose(PAC) is white or yellowish powder that is ordorless tasteless and non-toxic.
Petroleum grade Product features:
1, high degree of substitution, good uniformity of substitution .
2, high transparency, viscosity and water loss can be controlled .
3, suitable for fresh water, sea water, saturated brine slurry .
4, stabilize soft soil structure, prevent collapse of wall of a well .
5, can improve mud-making volum, reduce filteration loss .
6, has excellent performance in drilling of oil .
specification
Requirement
PAC-HV
PAC-LV
Appearance
Free-flowing powder
API filtrate volume:
At 0.57%(2ppb) of PAC concentration, ml
≤20
≤25
At 0.86%(3ppb) of PAC concentration, ml
≤15
≤15
At 1.14%(4ppb) of PAC concentration, ml
≤10
≤10
YP volume:
At 0.57%2ppbof PAC concentration
≥2.4Pa
(5 lb/100feet
2
)
≤0.5Pa
(1 lb/100feet
2
)
At 0.86%3ppbof PAC concentration
≥9.6Pa
(20
lb/100feet
2
)
≤1.0Pa
(2 lb/100feet
2
)
At 1.14%4ppbof PAC concentration
≥19.2Pa
(40 lb/100feet
2
)
≤1.5Pa
(3 lb/100feet
2
)
(According to API)
Petroleum grade Product features:
1, high degree of substitution, good uniformity of substitution .
2, high transparency, viscosity and water loss can be controlled .
3, suitable for fresh water, sea water, saturated brine slurry .
4, stabilize soft soil structure, prevent collapse of wall of a well .
5, can improve mud-making volum, reduce filteration loss .
6, has excellent performance in drilling of oil .
specification
Requirement
PAC-HV
PAC-LV
Appearance
Free-flowing powder
API filtrate volume:
At 0.57%(2ppb) of PAC concentration, ml
≤20
≤25
At 0.86%(3ppb) of PAC concentration, ml
≤15
≤15
At 1.14%(4ppb) of PAC concentration, ml
≤10
≤10
YP volume:
At 0.57%2ppbof PAC concentration
≥2.4Pa
(5 lb/100feet
2
)
≤0.5Pa
(1 lb/100feet
2
)
At 0.86%3ppbof PAC concentration
≥9.6Pa
(20
lb/100feet
2
)
≤1.0Pa
(2 lb/100feet
2
)
At 1.14%4ppbof PAC concentration
≥19.2Pa
(40 lb/100feet
2
)
≤1.5Pa
(3 lb/100feet
2
)
(According to API)
[I] Polyanionic Cellulose
Polyanionic cellulose(PAC) is white or yellowish powder that is ordorless tasteless and non-toxic.
Specification:
Product Type and Specification:
CO-50
CO-5000
CO-10000
CO-15000
CO-20000
CO-30000
CO-40000
Viscosity( 2%solution) ,mPa?s
100
4000~7000
8000~12000
13000~17000
18000~22000
26000~34000
36000~44000
Degree of Substitution(DS)
≥0.9
≥0.9
≥0.9
≥0.9
≥0.9
≥0.9
≥0.9
Chlorideas Cl-,%
≤1.5
≤1.5
≤1.5
≤1.5
≤1.5
≤1.5
≤1.5
pH
6.0-8.5
6.0-8.5
6.0-8.5
6.0-8.5
6.0-8.5
6.0-8.5
6.0-8.5
Loss on drying,%
≤10.0
≤10.0
≤10.0
≤10.0
≤10.0
≤10.0
≤10.0
Specification:
Product Type and Specification:
CO-50
CO-5000
CO-10000
CO-15000
CO-20000
CO-30000
CO-40000
Viscosity( 2%solution) ,mPa?s
100
4000~7000
8000~12000
13000~17000
18000~22000
26000~34000
36000~44000
Degree of Substitution(DS)
≥0.9
≥0.9
≥0.9
≥0.9
≥0.9
≥0.9
≥0.9
Chlorideas Cl-,%
≤1.5
≤1.5
≤1.5
≤1.5
≤1.5
≤1.5
≤1.5
pH
6.0-8.5
6.0-8.5
6.0-8.5
6.0-8.5
6.0-8.5
6.0-8.5
6.0-8.5
Loss on drying,%
≤10.0
≤10.0
≤10.0
≤10.0
≤10.0
≤10.0
≤10.0
absorb for sulphur
Molecular Sieve
10 years experience for molecular sieves
sphere,pellet,powder
as dry and clean air system, air purification
4 Technical Parameter for
3A
Item
Unit
Technical data
Shape
Pellet
Sphere
Diameter
mm
1.5-1.7
3.0-3.3
1.7-2.5
3.0-5.0
Size ratio up to grade
%
≥98
≥98
≥96
≥96
Bulk density
g/ml
≥0.64
≥0.64
≥0.68
≥0.68
Wear ratio
%
≤0.20
≤0.25
≤0.10
≤0.10
Crushing strength
N
≥45/cm
≥60/cm
≥30/piece
≥70/piece
Static water adsorption
%
≥20
≥20
≥20
≥20
Ethylene adsorption
%
≤3.0
≤3.0
≤3.0
≤3.0
Water content, as shipped
%
≤1.5
≤1.5
≤1.5
≤1.5
Technical Parameter for
4A
Item
Unit
Technical data
Shape
Pellet
Sphere
Diameter
mm
1.5-1.7
3.0-3.3
1.7-2.5
3.0-5.0
Size ratio up to grade
%
≥98
≥98
≥96
≥96
Bulk density
g/ml
≥0.66
≥0.66
≥0.66
≥0.66
Wear ratio
%
≤0.20
≤0.40
≤0.20
≤0.20
Crushing strength
N
≥30/cm
≥45/cm
≥30/piece
≥70/piece
Static water adsorption
%
≥20.5
≥20.5
≥21
≥21
Static methanol adsorption
%
≥15
≥15
≥15
≥15
Water content, as shipped
%
≤1.5
≤1.5
≤1.5
≤1.5
Technical Parameter for
5A
Item
Unit
Technical data
Shape
Pellet
Sphere
Diameter
mm
1.5-1.7
3.0-3.3
1.7-2.5
3.0-5.0
Size ratio up to grade
%
≥98
≥98
≥96
≥96
Bulk density
g/ml
≥0.64
≥0.64
≥0.66
≥0.66
Wear ratio
%
≤0.20
≤0.40
≤0.20
≤0.20
Crushing strength
N
≥30/cm
≥45/cm
≥30/piece
≥60/piece
Static water adsorption
%
≥21.5
≥21.5
≥21.5
≥21.5
Water content, as shipped
%
≤1.5
≤1.5
≤1.5
≤1.5
Technical Parameter for
13X
Item
Unit
Technical data
Shape
Pellet
Sphere
Diameter
mm
1.5-1.7
3.0-3.3
1.7-2.5
3.0-5.0
Size ratio up to grade
%
≥98
≥98
≥96
≥96
Bulk density
g/ml
≥0.61
≥0.61
≥0.64
≥0.64
Wear ratio
%
≤0.10
≤0.20
≤0.10
≤0.10
Crushing strength
N
≥30/cm
≥45/cm
≥25/piece
≥65/piece
Static water adsorption
%
≥23.5
≥23.5
≥23.5
≥23.5
Static CO2 adsorption
%
≥18
≥18
≥18
≥18
Water content, as shipped
%
≤1.5
≤1.5
≤1.5
≤1.5
10 years experience for molecular sieves
sphere,pellet,powder
as dry and clean air system, air purification
4 Technical Parameter for
3A
Item
Unit
Technical data
Shape
Pellet
Sphere
Diameter
mm
1.5-1.7
3.0-3.3
1.7-2.5
3.0-5.0
Size ratio up to grade
%
≥98
≥98
≥96
≥96
Bulk density
g/ml
≥0.64
≥0.64
≥0.68
≥0.68
Wear ratio
%
≤0.20
≤0.25
≤0.10
≤0.10
Crushing strength
N
≥45/cm
≥60/cm
≥30/piece
≥70/piece
Static water adsorption
%
≥20
≥20
≥20
≥20
Ethylene adsorption
%
≤3.0
≤3.0
≤3.0
≤3.0
Water content, as shipped
%
≤1.5
≤1.5
≤1.5
≤1.5
Technical Parameter for
4A
Item
Unit
Technical data
Shape
Pellet
Sphere
Diameter
mm
1.5-1.7
3.0-3.3
1.7-2.5
3.0-5.0
Size ratio up to grade
%
≥98
≥98
≥96
≥96
Bulk density
g/ml
≥0.66
≥0.66
≥0.66
≥0.66
Wear ratio
%
≤0.20
≤0.40
≤0.20
≤0.20
Crushing strength
N
≥30/cm
≥45/cm
≥30/piece
≥70/piece
Static water adsorption
%
≥20.5
≥20.5
≥21
≥21
Static methanol adsorption
%
≥15
≥15
≥15
≥15
Water content, as shipped
%
≤1.5
≤1.5
≤1.5
≤1.5
Technical Parameter for
5A
Item
Unit
Technical data
Shape
Pellet
Sphere
Diameter
mm
1.5-1.7
3.0-3.3
1.7-2.5
3.0-5.0
Size ratio up to grade
%
≥98
≥98
≥96
≥96
Bulk density
g/ml
≥0.64
≥0.64
≥0.66
≥0.66
Wear ratio
%
≤0.20
≤0.40
≤0.20
≤0.20
Crushing strength
N
≥30/cm
≥45/cm
≥30/piece
≥60/piece
Static water adsorption
%
≥21.5
≥21.5
≥21.5
≥21.5
Water content, as shipped
%
≤1.5
≤1.5
≤1.5
≤1.5
Technical Parameter for
13X
Item
Unit
Technical data
Shape
Pellet
Sphere
Diameter
mm
1.5-1.7
3.0-3.3
1.7-2.5
3.0-5.0
Size ratio up to grade
%
≥98
≥98
≥96
≥96
Bulk density
g/ml
≥0.61
≥0.61
≥0.64
≥0.64
Wear ratio
%
≤0.10
≤0.20
≤0.10
≤0.10
Crushing strength
N
≥30/cm
≥45/cm
≥25/piece
≥65/piece
Static water adsorption
%
≥23.5
≥23.5
≥23.5
≥23.5
Static CO2 adsorption
%
≥18
≥18
≥18
≥18
Water content, as shipped
%
≤1.5
≤1.5
≤1.5
≤1.5
absorbent
absorbent:
1.high quality,low price
2.20 years professional manufacture
3.certificate of ISO9001:2000
Technical data of absorbent:
Type
Item
KA401
Absorbent
KA402
Defluoridizer
KA403
Absorbent
for H2O2
KA404
Antichlor
KA405
Catalyst carrier
KA406
Absorbent
in air
separation
Appearance
White ball
Main crystal phase
χ-p
χ-p
γ
χ-p
γ
χ-p
Chemical composition %
Al2O3
≥93
≥93
≥92
≥90
≥93
≥90
Na2O
≤0.3
≤0.3
≤0.5
0.15-0.3
≤0.3
I.L
6-8
6-8
≤8
≤5
6-8
Bulk density, g/ml
0.68-0.72
0.70-0.75
0.65-0.75
0.68-0.78
0.70-0.80
0.68-0.72
Surface area, m
2
/g
≥280
≥280
200-260
≥300
≥200
≥300
Pore volume, ml/g
0.3-0.45
0.3-0.42
0.4-0.46
0.3-0.5
0.4
0.3-0.5
Static absorption, %
Water
15-17
Fluorin
0.12
Water
50
Chlorine
10-20
Water
50-70
Water
17-19
Activity, %
56-62
Loss on abrasion, %
≤1.0
≤1.0
≤1.0
≤0.7
≤0.4
≤0.8
Crushing strength, N/grain
≥40
≥40
≥40
≥60
≥60
≥100
≥100
≥82
≥100
≥100
≥120
≥130
≥120
≥120
≥110
≥120
≥150
≥150
≥150
≥160
≥150
≥200
≥200
≥200
≥200
≥220
≥200
Features of absorbent:
Activated alumina has a large capacity of absorption, high surface area, high strength and thermal stability
Application of absorbent:
Activated alumina can be widely used as an absorbent, desiccant and catalyst carrier in chemical, petrochemical, fertilizer, oil and gas industries
1.high quality,low price
2.20 years professional manufacture
3.certificate of ISO9001:2000
Technical data of absorbent:
Type
Item
KA401
Absorbent
KA402
Defluoridizer
KA403
Absorbent
for H2O2
KA404
Antichlor
KA405
Catalyst carrier
KA406
Absorbent
in air
separation
Appearance
White ball
Main crystal phase
χ-p
χ-p
γ
χ-p
γ
χ-p
Chemical composition %
Al2O3
≥93
≥93
≥92
≥90
≥93
≥90
Na2O
≤0.3
≤0.3
≤0.5
0.15-0.3
≤0.3
I.L
6-8
6-8
≤8
≤5
6-8
Bulk density, g/ml
0.68-0.72
0.70-0.75
0.65-0.75
0.68-0.78
0.70-0.80
0.68-0.72
Surface area, m
2
/g
≥280
≥280
200-260
≥300
≥200
≥300
Pore volume, ml/g
0.3-0.45
0.3-0.42
0.4-0.46
0.3-0.5
0.4
0.3-0.5
Static absorption, %
Water
15-17
Fluorin
0.12
Water
50
Chlorine
10-20
Water
50-70
Water
17-19
Activity, %
56-62
Loss on abrasion, %
≤1.0
≤1.0
≤1.0
≤0.7
≤0.4
≤0.8
Crushing strength, N/grain
≥40
≥40
≥40
≥60
≥60
≥100
≥100
≥82
≥100
≥100
≥120
≥130
≥120
≥120
≥110
≥120
≥150
≥150
≥150
≥160
≥150
≥200
≥200
≥200
≥200
≥220
≥200
Features of absorbent:
Activated alumina has a large capacity of absorption, high surface area, high strength and thermal stability
Application of absorbent:
Activated alumina can be widely used as an absorbent, desiccant and catalyst carrier in chemical, petrochemical, fertilizer, oil and gas industries
accessary rust remover FUKKOL DAC 2
FUKKOL DAC 2 RUST REMOVER
1.Super rust remove power
2.Do not harm the metal.
3.Rapid wetting and penetrating ability
FUKKOL DAC 2 RUST REMOVER
http://www.fukkol-lube.com/asp-bin/EN/?page=1
Description:
Fukkol DAC2 is a special viscous liquid acid formulation having a special cationic type penetrant
and stable inhibitor which provides effective protection on most metals and many other surfaces.
It can be used in ways like dipping,brushing or wipeing, etc.
Application
Ideal for prepaint treatment of metal surfaces,
finishing housing and panels, aluminum and tin boilers and molds, brightening aluminum and
stainless steel Also applicable for cleaning radioactive contaminated equipment,
cleaning tile and grouting.
Benefits
DAC 2 has rapid wetting and penetrating ability, thus providing faster rust and corrosion
removal than other commonly used acids. Effective in a wide range of temperatures DAC 2 special inhibitor does not precipitate out and
become inactive even after large amounts of
rust and corrosion have been dissolved. DAC 2 rinses freely and contains no muriatic acid.
Typical physical properties
Physical form
Lipuid
Colour
Clear red
Odour
pleasant aroma
Solubility in Water
100%soluble in water
proportion
1.4
pH 10% Solution
1.8
Rinsing Properties
Excellent
Flash and Fire Point
None
1.Super rust remove power
2.Do not harm the metal.
3.Rapid wetting and penetrating ability
FUKKOL DAC 2 RUST REMOVER
http://www.fukkol-lube.com/asp-bin/EN/?page=1
Description:
Fukkol DAC2 is a special viscous liquid acid formulation having a special cationic type penetrant
and stable inhibitor which provides effective protection on most metals and many other surfaces.
It can be used in ways like dipping,brushing or wipeing, etc.
Application
Ideal for prepaint treatment of metal surfaces,
finishing housing and panels, aluminum and tin boilers and molds, brightening aluminum and
stainless steel Also applicable for cleaning radioactive contaminated equipment,
cleaning tile and grouting.
Benefits
DAC 2 has rapid wetting and penetrating ability, thus providing faster rust and corrosion
removal than other commonly used acids. Effective in a wide range of temperatures DAC 2 special inhibitor does not precipitate out and
become inactive even after large amounts of
rust and corrosion have been dissolved. DAC 2 rinses freely and contains no muriatic acid.
Typical physical properties
Physical form
Lipuid
Colour
Clear red
Odour
pleasant aroma
Solubility in Water
100%soluble in water
proportion
1.4
pH 10% Solution
1.8
Rinsing Properties
Excellent
Flash and Fire Point
None
accessary rust remover FUKKOL DAC 2
FUKKOL DAC 2 RUST REMOVER
1.Super rust remove power
2.Do not harm the metal.
3.Rapid wetting and penetrating ability
FUKKOL DAC 2 RUST REMOVER
http://www.fukkol-lube.com/asp-bin/EN/?page=1
Description:
Fukkol DAC2 is a special viscous liquid acid formulation having a special cationic type penetrant
and stable inhibitor which provides effective protection on most metals and many other surfaces.
It can be used in ways like dipping,brushing or wipeing, etc.
Application
Ideal for prepaint treatment of metal surfaces,
finishing housing and panels, aluminum and tin boilers and molds, brightening aluminum and
stainless steel Also applicable for cleaning radioactive contaminated equipment,
cleaning tile and grouting.
Benefits
DAC 2 has rapid wetting and penetrating ability, thus providing faster rust and corrosion
removal than other commonly used acids. Effective in a wide range of temperatures DAC 2 special inhibitor does not precipitate out and
become inactive even after large amounts of
rust and corrosion have been dissolved. DAC 2 rinses freely and contains no muriatic acid.
Typical physical properties
Physical form
Lipuid
Colour
Clear red
Odour
pleasant aroma
Solubility in Water
100%soluble in water
proportion
1.4
pH 10% Solution
1.8
Rinsing Properties
Excellent
Flash and Fire Point
None
1.Super rust remove power
2.Do not harm the metal.
3.Rapid wetting and penetrating ability
FUKKOL DAC 2 RUST REMOVER
http://www.fukkol-lube.com/asp-bin/EN/?page=1
Description:
Fukkol DAC2 is a special viscous liquid acid formulation having a special cationic type penetrant
and stable inhibitor which provides effective protection on most metals and many other surfaces.
It can be used in ways like dipping,brushing or wipeing, etc.
Application
Ideal for prepaint treatment of metal surfaces,
finishing housing and panels, aluminum and tin boilers and molds, brightening aluminum and
stainless steel Also applicable for cleaning radioactive contaminated equipment,
cleaning tile and grouting.
Benefits
DAC 2 has rapid wetting and penetrating ability, thus providing faster rust and corrosion
removal than other commonly used acids. Effective in a wide range of temperatures DAC 2 special inhibitor does not precipitate out and
become inactive even after large amounts of
rust and corrosion have been dissolved. DAC 2 rinses freely and contains no muriatic acid.
Typical physical properties
Physical form
Lipuid
Colour
Clear red
Odour
pleasant aroma
Solubility in Water
100%soluble in water
proportion
1.4
pH 10% Solution
1.8
Rinsing Properties
Excellent
Flash and Fire Point
None
activated alumina adsorbent
activated alumina adsorbent:
1.high quality with low price
2.20 years professional manufacture
3.certificate of ISO9001:2000
Technical data of activated alumina adsorbent:
Type
Item
KA401
Absorbent
KA402
Defluoridizer
KA403
Absorbent
for H2O2
KA404
Antichlor
KA405
Catalyst carrier
KA406
Absorbent
in air
separation
Appearance
White ball
Main crystal phase
χ-p
χ-p
γ
χ-p
γ
χ-p
Chemical composition %
Al2O3
≥93
≥93
≥92
≥90
≥93
≥90
Na2O
≤0.3
≤0.3
≤0.5
0.15-0.3
≤0.3
I.L
6-8
6-8
≤8
≤5
6-8
Bulk density, g/ml
0.68-0.72
0.70-0.75
0.65-0.75
0.68-0.78
0.70-0.80
0.68-0.72
Surface area, m
2
/g
≥280
≥280
200-260
≥300
≥200
≥300
Pore volume, ml/g
0.3-0.45
0.3-0.42
0.4-0.46
0.3-0.5
0.4
0.3-0.5
Static absorption, %
Water
15-17
Fluorin
0.12
Water
50
Chlorine
10-20
Water
50-70
Water
17-19
Activity, %
56-62
Loss on abrasion, %
≤1.0
≤1.0
≤1.0
≤0.7
≤0.4
≤0.8
Crushing strength, N/grain
≥40
≥40
≥40
≥60
≥60
≥100
≥100
≥82
≥100
≥100
≥120
≥130
≥120
≥120
≥110
≥120
≥150
≥150
≥150
≥160
≥150
≥200
≥200
≥200
≥200
≥220
≥200
Features of activated alumina adsorbent:
Activated alumina has a large capacity of absorption, high surface area, high strength and thermal stability
Application of activated alumina adsorbent:
Activated alumina can be widely used as an absorbent, desiccant and catalyst carrier in chemical, petrochemical, fertilizer, oil and gas industries
1.high quality with low price
2.20 years professional manufacture
3.certificate of ISO9001:2000
Technical data of activated alumina adsorbent:
Type
Item
KA401
Absorbent
KA402
Defluoridizer
KA403
Absorbent
for H2O2
KA404
Antichlor
KA405
Catalyst carrier
KA406
Absorbent
in air
separation
Appearance
White ball
Main crystal phase
χ-p
χ-p
γ
χ-p
γ
χ-p
Chemical composition %
Al2O3
≥93
≥93
≥92
≥90
≥93
≥90
Na2O
≤0.3
≤0.3
≤0.5
0.15-0.3
≤0.3
I.L
6-8
6-8
≤8
≤5
6-8
Bulk density, g/ml
0.68-0.72
0.70-0.75
0.65-0.75
0.68-0.78
0.70-0.80
0.68-0.72
Surface area, m
2
/g
≥280
≥280
200-260
≥300
≥200
≥300
Pore volume, ml/g
0.3-0.45
0.3-0.42
0.4-0.46
0.3-0.5
0.4
0.3-0.5
Static absorption, %
Water
15-17
Fluorin
0.12
Water
50
Chlorine
10-20
Water
50-70
Water
17-19
Activity, %
56-62
Loss on abrasion, %
≤1.0
≤1.0
≤1.0
≤0.7
≤0.4
≤0.8
Crushing strength, N/grain
≥40
≥40
≥40
≥60
≥60
≥100
≥100
≥82
≥100
≥100
≥120
≥130
≥120
≥120
≥110
≥120
≥150
≥150
≥150
≥160
≥150
≥200
≥200
≥200
≥200
≥220
≥200
Features of activated alumina adsorbent:
Activated alumina has a large capacity of absorption, high surface area, high strength and thermal stability
Application of activated alumina adsorbent:
Activated alumina can be widely used as an absorbent, desiccant and catalyst carrier in chemical, petrochemical, fertilizer, oil and gas industries
activated alumina balls
activated alumina balls:
1.high quality with low price
2.20 years professional manufacture
3.certificate of ISO9001:2000
Technical data of activated alumina balls:
Type
Item
KA401
Absorbent
KA402
Defluoridizer
KA403
Absorbent
for H2O2
KA404
Antichlor
KA405
Catalyst carrier
KA406
Absorbent
in air
separation
Appearance
White ball
Main crystal phase
χ-p
χ-p
γ
χ-p
γ
χ-p
Chemical composition %
Al2O3
≥93
≥93
≥92
≥90
≥93
≥90
Na2O
≤0.3
≤0.3
≤0.5
0.15-0.3
≤0.3
I.L
6-8
6-8
≤8
≤5
6-8
Bulk density, g/ml
0.68-0.72
0.70-0.75
0.65-0.75
0.68-0.78
0.70-0.80
0.68-0.72
Surface area, m
2
/g
≥280
≥280
200-260
≥300
≥200
≥300
Pore volume, ml/g
0.3-0.45
0.3-0.42
0.4-0.46
0.3-0.5
0.4
0.3-0.5
Static absorption, %
Water
15-17
Fluorin
0.12
Water
50
Chlorine
10-20
Water
50-70
Water
17-19
Activity, %
56-62
Loss on abrasion, %
≤1.0
≤1.0
≤1.0
≤0.7
≤0.4
≤0.8
Crushing strength, N/grain
≥40
≥40
≥40
≥60
≥60
≥100
≥100
≥82
≥100
≥100
≥120
≥130
≥120
≥120
≥110
≥120
≥150
≥150
≥150
≥160
≥150
≥200
≥200
≥200
≥200
≥220
≥200
Features of activated alumina balls:
Activated alumina has a large capacity of absorption, high surface area, high strength and thermal stability
Application of activated alumina balls:
Activated alumina can be widely used as an absorbent, desiccant and catalyst carrier in chemical, petrochemical, fertilizer, oil and gas industries
1.high quality with low price
2.20 years professional manufacture
3.certificate of ISO9001:2000
Technical data of activated alumina balls:
Type
Item
KA401
Absorbent
KA402
Defluoridizer
KA403
Absorbent
for H2O2
KA404
Antichlor
KA405
Catalyst carrier
KA406
Absorbent
in air
separation
Appearance
White ball
Main crystal phase
χ-p
χ-p
γ
χ-p
γ
χ-p
Chemical composition %
Al2O3
≥93
≥93
≥92
≥90
≥93
≥90
Na2O
≤0.3
≤0.3
≤0.5
0.15-0.3
≤0.3
I.L
6-8
6-8
≤8
≤5
6-8
Bulk density, g/ml
0.68-0.72
0.70-0.75
0.65-0.75
0.68-0.78
0.70-0.80
0.68-0.72
Surface area, m
2
/g
≥280
≥280
200-260
≥300
≥200
≥300
Pore volume, ml/g
0.3-0.45
0.3-0.42
0.4-0.46
0.3-0.5
0.4
0.3-0.5
Static absorption, %
Water
15-17
Fluorin
0.12
Water
50
Chlorine
10-20
Water
50-70
Water
17-19
Activity, %
56-62
Loss on abrasion, %
≤1.0
≤1.0
≤1.0
≤0.7
≤0.4
≤0.8
Crushing strength, N/grain
≥40
≥40
≥40
≥60
≥60
≥100
≥100
≥82
≥100
≥100
≥120
≥130
≥120
≥120
≥110
≥120
≥150
≥150
≥150
≥160
≥150
≥200
≥200
≥200
≥200
≥220
≥200
Features of activated alumina balls:
Activated alumina has a large capacity of absorption, high surface area, high strength and thermal stability
Application of activated alumina balls:
Activated alumina can be widely used as an absorbent, desiccant and catalyst carrier in chemical, petrochemical, fertilizer, oil and gas industries
Autobike Engine Oil
Our strengths:
1, health and environmental pollution.
2 with ISO related national standards and international related environm
SANVO Autobike Engine Oil -SF 15W40:
Excellent low temperature cold boot and high temperature lubrication. Better cleaning dispersion, antifraying and other functions to reduce fraying for engines and prolong service life.
Our strengths:
1 health and environmental pollution.
2 with ISO related national standards and international related environmental standards.
3 reasonable price.
4 after-sale service.
5 products of good quality and reliable products are customers.
PACKING:
SF:15W40 0.9L*20 /1L*20
1, health and environmental pollution.
2 with ISO related national standards and international related environm
SANVO Autobike Engine Oil -SF 15W40:
Excellent low temperature cold boot and high temperature lubrication. Better cleaning dispersion, antifraying and other functions to reduce fraying for engines and prolong service life.
Our strengths:
1 health and environmental pollution.
2 with ISO related national standards and international related environmental standards.
3 reasonable price.
4 after-sale service.
5 products of good quality and reliable products are customers.
PACKING:
SF:15W40 0.9L*20 /1L*20
activated alumina desiccant
activated alumina desiccant:
1.high quality,low price
2.20 years professional manufacture
3.certificate of ISO9001:2000
Technical data of activated alumina desiccant:
Type
Item
KA401
Absorbent
KA402
Defluoridizer
KA403
Absorbent
for H2O2
KA404
Antichlor
KA405
Catalyst carrier
KA406
Absorbent
in air
separation
Appearance
White ball
Main crystal phase
χ-p
χ-p
γ
χ-p
γ
χ-p
Chemical composition %
Al2O3
≥93
≥93
≥92
≥90
≥93
≥90
Na2O
≤0.3
≤0.3
≤0.5
0.15-0.3
≤0.3
I.L
6-8
6-8
≤8
≤5
6-8
Bulk density, g/ml
0.68-0.72
0.70-0.75
0.65-0.75
0.68-0.78
0.70-0.80
0.68-0.72
Surface area, m
2
/g
≥280
≥280
200-260
≥300
≥200
≥300
Pore volume, ml/g
0.3-0.45
0.3-0.42
0.4-0.46
0.3-0.5
0.4
0.3-0.5
Static absorption, %
Water
15-17
Fluorin
0.12
Water
50
Chlorine
10-20
Water
50-70
Water
17-19
Activity, %
56-62
Loss on abrasion, %
≤1.0
≤1.0
≤1.0
≤0.7
≤0.4
≤0.8
Crushing strength, N/grain
≥40
≥40
≥40
≥60
≥60
≥100
≥100
≥82
≥100
≥100
≥120
≥130
≥120
≥120
≥110
≥120
≥150
≥150
≥150
≥160
≥150
≥200
≥200
≥200
≥200
≥220
≥200
Features of activated alumina desiccant:
Activated alumina has a large capacity of absorption, high surface area, high strength and thermal stability
Application of activated alumina desiccant:
Activated alumina can be widely used as an absorbent, desiccant and catalyst carrier in chemical, petrochemical, fertilizer, oil and gas industries
1.high quality,low price
2.20 years professional manufacture
3.certificate of ISO9001:2000
Technical data of activated alumina desiccant:
Type
Item
KA401
Absorbent
KA402
Defluoridizer
KA403
Absorbent
for H2O2
KA404
Antichlor
KA405
Catalyst carrier
KA406
Absorbent
in air
separation
Appearance
White ball
Main crystal phase
χ-p
χ-p
γ
χ-p
γ
χ-p
Chemical composition %
Al2O3
≥93
≥93
≥92
≥90
≥93
≥90
Na2O
≤0.3
≤0.3
≤0.5
0.15-0.3
≤0.3
I.L
6-8
6-8
≤8
≤5
6-8
Bulk density, g/ml
0.68-0.72
0.70-0.75
0.65-0.75
0.68-0.78
0.70-0.80
0.68-0.72
Surface area, m
2
/g
≥280
≥280
200-260
≥300
≥200
≥300
Pore volume, ml/g
0.3-0.45
0.3-0.42
0.4-0.46
0.3-0.5
0.4
0.3-0.5
Static absorption, %
Water
15-17
Fluorin
0.12
Water
50
Chlorine
10-20
Water
50-70
Water
17-19
Activity, %
56-62
Loss on abrasion, %
≤1.0
≤1.0
≤1.0
≤0.7
≤0.4
≤0.8
Crushing strength, N/grain
≥40
≥40
≥40
≥60
≥60
≥100
≥100
≥82
≥100
≥100
≥120
≥130
≥120
≥120
≥110
≥120
≥150
≥150
≥150
≥160
≥150
≥200
≥200
≥200
≥200
≥220
≥200
Features of activated alumina desiccant:
Activated alumina has a large capacity of absorption, high surface area, high strength and thermal stability
Application of activated alumina desiccant:
Activated alumina can be widely used as an absorbent, desiccant and catalyst carrier in chemical, petrochemical, fertilizer, oil and gas industries
activated alumina
activated alumina:
1.high quality with low price
2.20 years professional manufacture
3.certificate of ISO9001:2000
Technical data of activated alumina:
Type
Item
KA401
Absorbent
KA402
Defluoridizer
KA403
Absorbent
for H2O2
KA404
Antichlor
KA405
Catalyst carrier
KA406
Absorbent
in air
separation
Appearance
White ball
Main crystal phase
χ-p
χ-p
γ
χ-p
γ
χ-p
Chemical composition %
Al2O3
≥93
≥93
≥92
≥90
≥93
≥90
Na2O
≤0.3
≤0.3
≤0.5
0.15-0.3
≤0.3
I.L
6-8
6-8
≤8
≤5
6-8
Bulk density, g/ml
0.68-0.72
0.70-0.75
0.65-0.75
0.68-0.78
0.70-0.80
0.68-0.72
Surface area, m
2
/g
≥280
≥280
200-260
≥300
≥200
≥300
Pore volume, ml/g
0.3-0.45
0.3-0.42
0.4-0.46
0.3-0.5
0.4
0.3-0.5
Static absorption, %
Water
15-17
Fluorin
0.12
Water
50
Chlorine
10-20
Water
50-70
Water
17-19
Activity, %
56-62
Loss on abrasion, %
≤1.0
≤1.0
≤1.0
≤0.7
≤0.4
≤0.8
Crushing strength, N/grain
≥40
≥40
≥40
≥60
≥60
≥100
≥100
≥82
≥100
≥100
≥120
≥130
≥120
≥120
≥110
≥120
≥150
≥150
≥150
≥160
≥150
≥200
≥200
≥200
≥200
≥220
≥200
Features of activated alumina:
Activated alumina has a large capacity of absorption, high surface area, high strength and thermal stability
Application of activated alumina:
Activated alumina can be widely used as an absorbent, desiccant and catalyst carrier in chemical, petrochemical, fertilizer, oil and gas industries
1.high quality with low price
2.20 years professional manufacture
3.certificate of ISO9001:2000
Technical data of activated alumina:
Type
Item
KA401
Absorbent
KA402
Defluoridizer
KA403
Absorbent
for H2O2
KA404
Antichlor
KA405
Catalyst carrier
KA406
Absorbent
in air
separation
Appearance
White ball
Main crystal phase
χ-p
χ-p
γ
χ-p
γ
χ-p
Chemical composition %
Al2O3
≥93
≥93
≥92
≥90
≥93
≥90
Na2O
≤0.3
≤0.3
≤0.5
0.15-0.3
≤0.3
I.L
6-8
6-8
≤8
≤5
6-8
Bulk density, g/ml
0.68-0.72
0.70-0.75
0.65-0.75
0.68-0.78
0.70-0.80
0.68-0.72
Surface area, m
2
/g
≥280
≥280
200-260
≥300
≥200
≥300
Pore volume, ml/g
0.3-0.45
0.3-0.42
0.4-0.46
0.3-0.5
0.4
0.3-0.5
Static absorption, %
Water
15-17
Fluorin
0.12
Water
50
Chlorine
10-20
Water
50-70
Water
17-19
Activity, %
56-62
Loss on abrasion, %
≤1.0
≤1.0
≤1.0
≤0.7
≤0.4
≤0.8
Crushing strength, N/grain
≥40
≥40
≥40
≥60
≥60
≥100
≥100
≥82
≥100
≥100
≥120
≥130
≥120
≥120
≥110
≥120
≥150
≥150
≥150
≥160
≥150
≥200
≥200
≥200
≥200
≥220
≥200
Features of activated alumina:
Activated alumina has a large capacity of absorption, high surface area, high strength and thermal stability
Application of activated alumina:
Activated alumina can be widely used as an absorbent, desiccant and catalyst carrier in chemical, petrochemical, fertilizer, oil and gas industries
activated alumina
activated alumina:
1.high quality with low price
2.20 years professional manufacture
3.certificate of ISO9001:2000
Technical data of activated alumina:
Type
Item
KA401
Absorbent
KA402
Defluoridizer
KA403
Absorbent
for H2O2
KA404
Antichlor
KA405
Catalyst carrier
KA406
Absorbent
in air
separation
Appearance
White ball
Main crystal phase
χ-p
χ-p
γ
χ-p
γ
χ-p
Chemical composition %
Al2O3
≥93
≥93
≥92
≥90
≥93
≥90
Na2O
≤0.3
≤0.3
≤0.5
0.15-0.3
≤0.3
I.L
6-8
6-8
≤8
≤5
6-8
Bulk density, g/ml
0.68-0.72
0.70-0.75
0.65-0.75
0.68-0.78
0.70-0.80
0.68-0.72
Surface area, m
2
/g
≥280
≥280
200-260
≥300
≥200
≥300
Pore volume, ml/g
0.3-0.45
0.3-0.42
0.4-0.46
0.3-0.5
0.4
0.3-0.5
Static absorption, %
Water
15-17
Fluorin
0.12
Water
50
Chlorine
10-20
Water
50-70
Water
17-19
Activity, %
56-62
Loss on abrasion, %
≤1.0
≤1.0
≤1.0
≤0.7
≤0.4
≤0.8
Crushing strength, N/grain
≥40
≥40
≥40
≥60
≥60
≥100
≥100
≥82
≥100
≥100
≥120
≥130
≥120
≥120
≥110
≥120
≥150
≥150
≥150
≥160
≥150
≥200
≥200
≥200
≥200
≥220
≥200
Features of activated alumina:
Activated alumina has a large capacity of absorption, high surface area, high strength and thermal stability
Application of activated alumina:
Activated alumina can be widely used as an absorbent, desiccant and catalyst carrier in chemical, petrochemical, fertilizer, oil and gas industries
1.high quality with low price
2.20 years professional manufacture
3.certificate of ISO9001:2000
Technical data of activated alumina:
Type
Item
KA401
Absorbent
KA402
Defluoridizer
KA403
Absorbent
for H2O2
KA404
Antichlor
KA405
Catalyst carrier
KA406
Absorbent
in air
separation
Appearance
White ball
Main crystal phase
χ-p
χ-p
γ
χ-p
γ
χ-p
Chemical composition %
Al2O3
≥93
≥93
≥92
≥90
≥93
≥90
Na2O
≤0.3
≤0.3
≤0.5
0.15-0.3
≤0.3
I.L
6-8
6-8
≤8
≤5
6-8
Bulk density, g/ml
0.68-0.72
0.70-0.75
0.65-0.75
0.68-0.78
0.70-0.80
0.68-0.72
Surface area, m
2
/g
≥280
≥280
200-260
≥300
≥200
≥300
Pore volume, ml/g
0.3-0.45
0.3-0.42
0.4-0.46
0.3-0.5
0.4
0.3-0.5
Static absorption, %
Water
15-17
Fluorin
0.12
Water
50
Chlorine
10-20
Water
50-70
Water
17-19
Activity, %
56-62
Loss on abrasion, %
≤1.0
≤1.0
≤1.0
≤0.7
≤0.4
≤0.8
Crushing strength, N/grain
≥40
≥40
≥40
≥60
≥60
≥100
≥100
≥82
≥100
≥100
≥120
≥130
≥120
≥120
≥110
≥120
≥150
≥150
≥150
≥160
≥150
≥200
≥200
≥200
≥200
≥220
≥200
Features of activated alumina:
Activated alumina has a large capacity of absorption, high surface area, high strength and thermal stability
Application of activated alumina:
Activated alumina can be widely used as an absorbent, desiccant and catalyst carrier in chemical, petrochemical, fertilizer, oil and gas industries
activated alumina
activated alumina:
1.high quality with low price
2.20 years professional manufacture
3.certificate of ISO9001:2000
Technical data of activated alumina:
Type
Item
KA401
Absorbent
KA402
Defluoridizer
KA403
Absorbent
for H2O2
KA404
Antichlor
KA405
Catalyst carrier
KA406
Absorbent
in air
separation
Appearance
White ball
Main crystal phase
χ-p
χ-p
γ
χ-p
γ
χ-p
Chemical composition %
Al2O3
≥93
≥93
≥92
≥90
≥93
≥90
Na2O
≤0.3
≤0.3
≤0.5
0.15-0.3
≤0.3
I.L
6-8
6-8
≤8
≤5
6-8
Bulk density, g/ml
0.68-0.72
0.70-0.75
0.65-0.75
0.68-0.78
0.70-0.80
0.68-0.72
Surface area, m
2
/g
≥280
≥280
200-260
≥300
≥200
≥300
Pore volume, ml/g
0.3-0.45
0.3-0.42
0.4-0.46
0.3-0.5
0.4
0.3-0.5
Static absorption, %
Water
15-17
Fluorin
0.12
Water
50
Chlorine
10-20
Water
50-70
Water
17-19
Activity, %
56-62
Loss on abrasion, %
≤1.0
≤1.0
≤1.0
≤0.7
≤0.4
≤0.8
Crushing strength, N/grain
≥40
≥40
≥40
≥60
≥60
≥100
≥100
≥82
≥100
≥100
≥120
≥130
≥120
≥120
≥110
≥120
≥150
≥150
≥150
≥160
≥150
≥200
≥200
≥200
≥200
≥220
≥200
Features of activated alumina:
Activated alumina has a large capacity of absorption, high surface area, high strength and thermal stability
Application of activated alumina:
Activated alumina can be widely used as an absorbent, desiccant and catalyst carrier in chemical, petrochemical, fertilizer, oil and gas industries
1.high quality with low price
2.20 years professional manufacture
3.certificate of ISO9001:2000
Technical data of activated alumina:
Type
Item
KA401
Absorbent
KA402
Defluoridizer
KA403
Absorbent
for H2O2
KA404
Antichlor
KA405
Catalyst carrier
KA406
Absorbent
in air
separation
Appearance
White ball
Main crystal phase
χ-p
χ-p
γ
χ-p
γ
χ-p
Chemical composition %
Al2O3
≥93
≥93
≥92
≥90
≥93
≥90
Na2O
≤0.3
≤0.3
≤0.5
0.15-0.3
≤0.3
I.L
6-8
6-8
≤8
≤5
6-8
Bulk density, g/ml
0.68-0.72
0.70-0.75
0.65-0.75
0.68-0.78
0.70-0.80
0.68-0.72
Surface area, m
2
/g
≥280
≥280
200-260
≥300
≥200
≥300
Pore volume, ml/g
0.3-0.45
0.3-0.42
0.4-0.46
0.3-0.5
0.4
0.3-0.5
Static absorption, %
Water
15-17
Fluorin
0.12
Water
50
Chlorine
10-20
Water
50-70
Water
17-19
Activity, %
56-62
Loss on abrasion, %
≤1.0
≤1.0
≤1.0
≤0.7
≤0.4
≤0.8
Crushing strength, N/grain
≥40
≥40
≥40
≥60
≥60
≥100
≥100
≥82
≥100
≥100
≥120
≥130
≥120
≥120
≥110
≥120
≥150
≥150
≥150
≥160
≥150
≥200
≥200
≥200
≥200
≥220
≥200
Features of activated alumina:
Activated alumina has a large capacity of absorption, high surface area, high strength and thermal stability
Application of activated alumina:
Activated alumina can be widely used as an absorbent, desiccant and catalyst carrier in chemical, petrochemical, fertilizer, oil and gas industries
activated alumina
activated alumina:
1.high quality with low price
2.20 years professional manufacture
3.certificate of ISO9001:2000
Technical data of activated alumina:
Type
Item
KA401
Absorbent
KA402
Defluoridizer
KA403
Absorbent
for H2O2
KA404
Antichlor
KA405
Catalyst carrier
KA406
Absorbent
in air
separation
Appearance
White ball
Main crystal phase
χ-p
χ-p
γ
χ-p
γ
χ-p
Chemical composition %
Al2O3
≥93
≥93
≥92
≥90
≥93
≥90
Na2O
≤0.3
≤0.3
≤0.5
0.15-0.3
≤0.3
I.L
6-8
6-8
≤8
≤5
6-8
Bulk density, g/ml
0.68-0.72
0.70-0.75
0.65-0.75
0.68-0.78
0.70-0.80
0.68-0.72
Surface area, m
2
/g
≥280
≥280
200-260
≥300
≥200
≥300
Pore volume, ml/g
0.3-0.45
0.3-0.42
0.4-0.46
0.3-0.5
0.4
0.3-0.5
Static absorption, %
Water
15-17
Fluorin
0.12
Water
50
Chlorine
10-20
Water
50-70
Water
17-19
Activity, %
56-62
Loss on abrasion, %
≤1.0
≤1.0
≤1.0
≤0.7
≤0.4
≤0.8
Crushing strength, N/grain
≥40
≥40
≥40
≥60
≥60
≥100
≥100
≥82
≥100
≥100
≥120
≥130
≥120
≥120
≥110
≥120
≥150
≥150
≥150
≥160
≥150
≥200
≥200
≥200
≥200
≥220
≥200
Features of activated alumina:
Activated alumina has a large capacity of absorption, high surface area, high strength and thermal stability
Application of activated alumina:
Activated alumina can be widely used as an absorbent, desiccant and catalyst carrier in chemical, petrochemical, fertilizer, oil and gas industries
1.high quality with low price
2.20 years professional manufacture
3.certificate of ISO9001:2000
Technical data of activated alumina:
Type
Item
KA401
Absorbent
KA402
Defluoridizer
KA403
Absorbent
for H2O2
KA404
Antichlor
KA405
Catalyst carrier
KA406
Absorbent
in air
separation
Appearance
White ball
Main crystal phase
χ-p
χ-p
γ
χ-p
γ
χ-p
Chemical composition %
Al2O3
≥93
≥93
≥92
≥90
≥93
≥90
Na2O
≤0.3
≤0.3
≤0.5
0.15-0.3
≤0.3
I.L
6-8
6-8
≤8
≤5
6-8
Bulk density, g/ml
0.68-0.72
0.70-0.75
0.65-0.75
0.68-0.78
0.70-0.80
0.68-0.72
Surface area, m
2
/g
≥280
≥280
200-260
≥300
≥200
≥300
Pore volume, ml/g
0.3-0.45
0.3-0.42
0.4-0.46
0.3-0.5
0.4
0.3-0.5
Static absorption, %
Water
15-17
Fluorin
0.12
Water
50
Chlorine
10-20
Water
50-70
Water
17-19
Activity, %
56-62
Loss on abrasion, %
≤1.0
≤1.0
≤1.0
≤0.7
≤0.4
≤0.8
Crushing strength, N/grain
≥40
≥40
≥40
≥60
≥60
≥100
≥100
≥82
≥100
≥100
≥120
≥130
≥120
≥120
≥110
≥120
≥150
≥150
≥150
≥160
≥150
≥200
≥200
≥200
≥200
≥220
≥200
Features of activated alumina:
Activated alumina has a large capacity of absorption, high surface area, high strength and thermal stability
Application of activated alumina:
Activated alumina can be widely used as an absorbent, desiccant and catalyst carrier in chemical, petrochemical, fertilizer, oil and gas industries
activated alumina
activated alumina:
1.high quality with low price
2.20 years professional manufacture
3.certificate of ISO9001:2000
Technical data of activated alumina:
Type
Item
KA401
Absorbent
KA402
Defluoridizer
KA403
Absorbent
for H2O2
KA404
Antichlor
KA405
Catalyst carrier
KA406
Absorbent
in air
separation
Appearance
White ball
Main crystal phase
χ-p
χ-p
γ
χ-p
γ
χ-p
Chemical composition %
Al2O3
≥93
≥93
≥92
≥90
≥93
≥90
Na2O
≤0.3
≤0.3
≤0.5
0.15-0.3
≤0.3
I.L
6-8
6-8
≤8
≤5
6-8
Bulk density, g/ml
0.68-0.72
0.70-0.75
0.65-0.75
0.68-0.78
0.70-0.80
0.68-0.72
Surface area, m
2
/g
≥280
≥280
200-260
≥300
≥200
≥300
Pore volume, ml/g
0.3-0.45
0.3-0.42
0.4-0.46
0.3-0.5
0.4
0.3-0.5
Static absorption, %
Water
15-17
Fluorin
0.12
Water
50
Chlorine
10-20
Water
50-70
Water
17-19
Activity, %
56-62
Loss on abrasion, %
≤1.0
≤1.0
≤1.0
≤0.7
≤0.4
≤0.8
Crushing strength, N/grain
≥40
≥40
≥40
≥60
≥60
≥100
≥100
≥82
≥100
≥100
≥120
≥130
≥120
≥120
≥110
≥120
≥150
≥150
≥150
≥160
≥150
≥200
≥200
≥200
≥200
≥220
≥200
Features of activated alumina:
Activated alumina has a large capacity of absorption, high surface area, high strength and thermal stability
Application of activated alumina:
Activated alumina can be widely used as an absorbent, desiccant and catalyst carrier in chemical, petrochemical, fertilizer, oil and gas industries
1.high quality with low price
2.20 years professional manufacture
3.certificate of ISO9001:2000
Technical data of activated alumina:
Type
Item
KA401
Absorbent
KA402
Defluoridizer
KA403
Absorbent
for H2O2
KA404
Antichlor
KA405
Catalyst carrier
KA406
Absorbent
in air
separation
Appearance
White ball
Main crystal phase
χ-p
χ-p
γ
χ-p
γ
χ-p
Chemical composition %
Al2O3
≥93
≥93
≥92
≥90
≥93
≥90
Na2O
≤0.3
≤0.3
≤0.5
0.15-0.3
≤0.3
I.L
6-8
6-8
≤8
≤5
6-8
Bulk density, g/ml
0.68-0.72
0.70-0.75
0.65-0.75
0.68-0.78
0.70-0.80
0.68-0.72
Surface area, m
2
/g
≥280
≥280
200-260
≥300
≥200
≥300
Pore volume, ml/g
0.3-0.45
0.3-0.42
0.4-0.46
0.3-0.5
0.4
0.3-0.5
Static absorption, %
Water
15-17
Fluorin
0.12
Water
50
Chlorine
10-20
Water
50-70
Water
17-19
Activity, %
56-62
Loss on abrasion, %
≤1.0
≤1.0
≤1.0
≤0.7
≤0.4
≤0.8
Crushing strength, N/grain
≥40
≥40
≥40
≥60
≥60
≥100
≥100
≥82
≥100
≥100
≥120
≥130
≥120
≥120
≥110
≥120
≥150
≥150
≥150
≥160
≥150
≥200
≥200
≥200
≥200
≥220
≥200
Features of activated alumina:
Activated alumina has a large capacity of absorption, high surface area, high strength and thermal stability
Application of activated alumina:
Activated alumina can be widely used as an absorbent, desiccant and catalyst carrier in chemical, petrochemical, fertilizer, oil and gas industries
additive T104 lubricant additive, chemicals
T104 Low based synthetic calcium sulfonate
Detergent
lubricant additive
additive,chemicals
supply qty: 900 ton
Detergent
lubricant additive
additive,chemicals
LOW BASED SYNTHETIC CALCIUM SULFONATE
T104
BRIEF INTRODUCTION
This product is primarily used in blending high quality internal combustion engine lubricant oil, especially the low-ash engine oil. It also can be used for antirust engine oil. It is brownish-red liquid. The recommended dosage in oil is 0.5-3.0%.
CHARACTERISTICS
Provide the lubricant with good detergency
Fine antirust performance
High-temperature stability
Good dispersibility
Increase the solubility of the lubricant
Scatter the glial and soot
PRODUCT FEATURES AND TEST METHODS
ITEM
INDICE
TEST METHOD
Density (20°C), kg/m
3
945
GB/T1884
Flash point (open cup), °C
≥181
GB/T3536
Kinematic Viscosity (100°C), mm
2
/s
≤147
GB/T265
TBN, mg KOH/g
30
SH/T0251
Calcium, m%
≥2.1
SH/T0297
Sulfur, m%
≥2.1
SH/T388
Turbidity (JTU)
≤149
SH/T0028
PACKING AND STORAGE
Packing: The product is packed in 200 liter metal drum (net weight: 180 kg/drum).
Storage: Please refer to SH/T0164, for transportation, storage and oil blending. Keep the temperature not higher than 60°C. For long-term storage the suggested temperature is lower than 50°C. The dry, clean and ventilating warehouse is recommended.
Detergent
lubricant additive
additive,chemicals
supply qty: 900 ton
Detergent
lubricant additive
additive,chemicals
LOW BASED SYNTHETIC CALCIUM SULFONATE
T104
BRIEF INTRODUCTION
This product is primarily used in blending high quality internal combustion engine lubricant oil, especially the low-ash engine oil. It also can be used for antirust engine oil. It is brownish-red liquid. The recommended dosage in oil is 0.5-3.0%.
CHARACTERISTICS
Provide the lubricant with good detergency
Fine antirust performance
High-temperature stability
Good dispersibility
Increase the solubility of the lubricant
Scatter the glial and soot
PRODUCT FEATURES AND TEST METHODS
ITEM
INDICE
TEST METHOD
Density (20°C), kg/m
3
945
GB/T1884
Flash point (open cup), °C
≥181
GB/T3536
Kinematic Viscosity (100°C), mm
2
/s
≤147
GB/T265
TBN, mg KOH/g
30
SH/T0251
Calcium, m%
≥2.1
SH/T0297
Sulfur, m%
≥2.1
SH/T388
Turbidity (JTU)
≤149
SH/T0028
PACKING AND STORAGE
Packing: The product is packed in 200 liter metal drum (net weight: 180 kg/drum).
Storage: Please refer to SH/T0164, for transportation, storage and oil blending. Keep the temperature not higher than 60°C. For long-term storage the suggested temperature is lower than 50°C. The dry, clean and ventilating warehouse is recommended.
additive T104 lubricant, chemicals
T104 Low based synthetic calcium sulfonate
Detergent
additive
lubricant,chemicals
supply qty: 900 ton
Detergent
additive
lubricant,chemicals
LOW BASED SYNTHETIC CALCIUM SULFONATE
T104
BRIEF INTRODUCTION
This product is primarily used in blending high quality internal combustion engine lubricant oil, especially the low-ash engine oil. It also can be used for antirust engine oil. It is brownish-red liquid. The recommended dosage in oil is 0.5-3.0%.
CHARACTERISTICS
Provide the lubricant with good detergency
Fine antirust performance
High-temperature stability
Good dispersibility
Increase the solubility of the lubricant
Scatter the glial and soot
PRODUCT FEATURES AND TEST METHODS
ITEM
INDICE
TEST METHOD
Density (20°C), kg/m
3
945
GB/T1884
Flash point (open cup), °C
≥181
GB/T3536
Kinematic Viscosity (100°C), mm
2
/s
≤147
GB/T265
TBN, mg KOH/g
30
SH/T0251
Calcium, m%
≥2.1
SH/T0297
Sulfur, m%
≥2.1
SH/T388
Turbidity (JTU)
≤149
SH/T0028
PACKING AND STORAGE
Packing: The product is packed in 200 liter metal drum (net weight: 180 kg/drum).
Storage: Please refer to SH/T0164, for transportation, storage and oil blending. Keep the temperature not higher than 60°C. For long-term storage the suggested temperature is lower than 50°C. The dry, clean and ventilating warehouse is recommended.
Detergent
additive
lubricant,chemicals
supply qty: 900 ton
Detergent
additive
lubricant,chemicals
LOW BASED SYNTHETIC CALCIUM SULFONATE
T104
BRIEF INTRODUCTION
This product is primarily used in blending high quality internal combustion engine lubricant oil, especially the low-ash engine oil. It also can be used for antirust engine oil. It is brownish-red liquid. The recommended dosage in oil is 0.5-3.0%.
CHARACTERISTICS
Provide the lubricant with good detergency
Fine antirust performance
High-temperature stability
Good dispersibility
Increase the solubility of the lubricant
Scatter the glial and soot
PRODUCT FEATURES AND TEST METHODS
ITEM
INDICE
TEST METHOD
Density (20°C), kg/m
3
945
GB/T1884
Flash point (open cup), °C
≥181
GB/T3536
Kinematic Viscosity (100°C), mm
2
/s
≤147
GB/T265
TBN, mg KOH/g
30
SH/T0251
Calcium, m%
≥2.1
SH/T0297
Sulfur, m%
≥2.1
SH/T388
Turbidity (JTU)
≤149
SH/T0028
PACKING AND STORAGE
Packing: The product is packed in 200 liter metal drum (net weight: 180 kg/drum).
Storage: Please refer to SH/T0164, for transportation, storage and oil blending. Keep the temperature not higher than 60°C. For long-term storage the suggested temperature is lower than 50°C. The dry, clean and ventilating warehouse is recommended.
additive T115B Detergent , lubricant additive
T115B High based sulfurized calcium alkyl phenate
additive
Detergent
lubricant additive
supply qty: 700 ton
additive , detergent , lubricant additive
HIGH BASED SULFURIZED CALCIUM ALKYLPHENATE
T115B
BRIEF INTRODUCTION
This product is primarily used for blending high quality internal combustion engine oil and marine cylinder oil, especially the turbocharged diesel engine oil. It is deep red liquid. The recommended dosage in oil is 0.5-4.0%.
CHARACTERISTICS
Provide the lubricant with good detergency
Good water resistance and abrasion resistance
High-temperature stability
Favorable acid neutralizing ability
Better anti-oxidation ability
High soap content makes sure good maintaining ability in basicity
PRODUCT FEATURES AND TEST METHODS
ITEM
INDICE
TEST METHOD
Density (20°C), kg/m
3
1085
Q/JTH003
Flash Point (open cup), °C
≥172
GB/T267
Kinematics Viscosity (100°C), mm
2
/s
206
GB/T265
TBN, mg KOH/g
≥243
SH/T0251
Calcium, m%
≥9.0
SH/T0297
Sulfur, m%
3.1
SH/T0303
Water, m%
≤0.29
GB/T260
PACKING AND STORAGE
Packing: The product is packed in 200 liter metal drum (net weight: 200 kg/drum).
Storage: Please refer to SH/T0164, for transportation, storage and oil blending. Keep the temperature not higher than 60°C. For long-term storage the suggested temperature is lower than 50°C. The dry, clean and ventilating warehouse is recommended.
additive
Detergent
lubricant additive
supply qty: 700 ton
additive , detergent , lubricant additive
HIGH BASED SULFURIZED CALCIUM ALKYLPHENATE
T115B
BRIEF INTRODUCTION
This product is primarily used for blending high quality internal combustion engine oil and marine cylinder oil, especially the turbocharged diesel engine oil. It is deep red liquid. The recommended dosage in oil is 0.5-4.0%.
CHARACTERISTICS
Provide the lubricant with good detergency
Good water resistance and abrasion resistance
High-temperature stability
Favorable acid neutralizing ability
Better anti-oxidation ability
High soap content makes sure good maintaining ability in basicity
PRODUCT FEATURES AND TEST METHODS
ITEM
INDICE
TEST METHOD
Density (20°C), kg/m
3
1085
Q/JTH003
Flash Point (open cup), °C
≥172
GB/T267
Kinematics Viscosity (100°C), mm
2
/s
206
GB/T265
TBN, mg KOH/g
≥243
SH/T0251
Calcium, m%
≥9.0
SH/T0297
Sulfur, m%
3.1
SH/T0303
Water, m%
≤0.29
GB/T260
PACKING AND STORAGE
Packing: The product is packed in 200 liter metal drum (net weight: 200 kg/drum).
Storage: Please refer to SH/T0164, for transportation, storage and oil blending. Keep the temperature not higher than 60°C. For long-term storage the suggested temperature is lower than 50°C. The dry, clean and ventilating warehouse is recommended.
additive T701 Corrosion inhibitor, lubricant additive
T701 Petroleum barium sulfonate
additive
Corrosion inhibitor
lubricant additive
supply qty: 700 ton
additive
Corrosion inhibitor
lubricant additive
PETROLEUM BARIUM SULFONATE
T701
BRIEF INTRODUCTION
The product is primarily used in antirust oils such as replacement-type anti-rust oil, inter-process rust oil, seal oil, anti-rust lubricating oil and anti-corrosion grease etc.,as the antirust agent. It is brown viscous liquid or semi-solid. The recommended dosage is 3-15%.
CHARACTERISTICS
Good oil solubility when heated
Excellent anti-rust and anti-corrosive ability to ferrous metals and non-ferrous metals
Good anti-humidity, anti-salt spray, anti-brine and water replacement performance
PRODUCT FEATURES AND TEST METHODS
ITEM
INDICE
TEST METHOD
Barium Sulfonate, m%,
≥46
Appendix A
Volatiles, m%
5.1
Appendix B
Barium, m%
≥7.1
SH/T0225
Watert, m%
≤0.2
GB/T260
Impurities, m%
≤0.1
SH/T511
PH Value
7.5
PH Test Strips
PACKING AND STORAGE
Packing: The product is packed in 25 liter metal drum.
Storage: Please refer to SH/T0164, for transportation, storage and oil blending. Keep the temperature not higher than 60°C. For long-term storage the suggested temperature is lower than 50°C. The dry, clean and ventilating warehouse is recommended.
additive
Corrosion inhibitor
lubricant additive
supply qty: 700 ton
additive
Corrosion inhibitor
lubricant additive
PETROLEUM BARIUM SULFONATE
T701
BRIEF INTRODUCTION
The product is primarily used in antirust oils such as replacement-type anti-rust oil, inter-process rust oil, seal oil, anti-rust lubricating oil and anti-corrosion grease etc.,as the antirust agent. It is brown viscous liquid or semi-solid. The recommended dosage is 3-15%.
CHARACTERISTICS
Good oil solubility when heated
Excellent anti-rust and anti-corrosive ability to ferrous metals and non-ferrous metals
Good anti-humidity, anti-salt spray, anti-brine and water replacement performance
PRODUCT FEATURES AND TEST METHODS
ITEM
INDICE
TEST METHOD
Barium Sulfonate, m%,
≥46
Appendix A
Volatiles, m%
5.1
Appendix B
Barium, m%
≥7.1
SH/T0225
Watert, m%
≤0.2
GB/T260
Impurities, m%
≤0.1
SH/T511
PH Value
7.5
PH Test Strips
PACKING AND STORAGE
Packing: The product is packed in 25 liter metal drum.
Storage: Please refer to SH/T0164, for transportation, storage and oil blending. Keep the temperature not higher than 60°C. For long-term storage the suggested temperature is lower than 50°C. The dry, clean and ventilating warehouse is recommended.
Automatic Transmission Fluid (Dexron III)
Automatic Transmission Fluid (DexronIII):
Excellent quality as original U.S.A. brands and reasonable price,your best choice.
Automatic Transmission Fluid(DexronIII) :
1) Excellent quality as original U.S.A. brands and reasonable price of Automatic Transmission Fluid (Dexron III) is your best choice.
2) This multi-purpose, high performance automatic transmission fluid Meets DEXRON-III(General Motors) and MERCON(fORD Motor) Specifications.
3) It is also recommended for power steering and hydraulic systems requiring Allison C-3, C-4 and Caterpillar TO-2 type fluids.
DESCRIPTION
Automatic Transmission Fluid(DEXRONIII)
Material Can
Plastic Bottle
PART NO.
PE-330-5
GROSS WEIGHT
5L
NET WEIGHT
4250g
PCS/CTN
6
Carton Size
D50*W34*H32(cm)
G.W./CTN
28
CBM/CTN
0.054
CTN/20'
519
CTN/40'
1185
Excellent quality as original U.S.A. brands and reasonable price,your best choice.
Automatic Transmission Fluid(DexronIII) :
1) Excellent quality as original U.S.A. brands and reasonable price of Automatic Transmission Fluid (Dexron III) is your best choice.
2) This multi-purpose, high performance automatic transmission fluid Meets DEXRON-III(General Motors) and MERCON(fORD Motor) Specifications.
3) It is also recommended for power steering and hydraulic systems requiring Allison C-3, C-4 and Caterpillar TO-2 type fluids.
DESCRIPTION
Automatic Transmission Fluid(DEXRONIII)
Material Can
Plastic Bottle
PART NO.
PE-330-5
GROSS WEIGHT
5L
NET WEIGHT
4250g
PCS/CTN
6
Carton Size
D50*W34*H32(cm)
G.W./CTN
28
CBM/CTN
0.054
CTN/20'
519
CTN/40'
1185
additives V3966 engine oil additive, lubricant additive
1,additives
2,lubricant additive
3,engine oil additive
4,petrochemical
supply qty: 900M T
additives ,engine oil additive, lubricant additive
ANTIWEAR HYDRAULIC OIL ADDITIVE
0.8%-1.0%
V3966
BRIEF INTRODUCTION
This product is antiwear hydraulic fluid additive package. It is brown liquid. The recommended dosage is 1.0% for blending high quality antiwear hydraulic oil that can meet the requirements of first-class GB11118.1-94 L-HM hydraulic oil and NFE-603.
CHARACTERISTICS
Excellent extreme pressure performance
Good anti-wear, anti-oxidant, anti-corrosive and anti-rust ability
PRODUCT FEATURES AND TEST METHODS
ITEM
INDICE
TEST METHOD
Density (20°C), kg/m
3
950
GB/T1884
Flash point (open cup), °C
≥162
GB/T267
Sulfur, m%
≥5.0
GB/T388
Phosphorus, m%
≥3.6
SH/T0296
Zinc, m%
≥2.5
SH/T0226
PACKING AND STORAGE
Packing: The product is packed in 200 liter metal drum (net weight: 200 kg/drum).
Storage: Please refer to SH/T0164, for transportation, storage and oil blending. Keep the temperature not higher than 60°C. For long-term storage the suggested temperature is lower than 50°C. The dry, clean and ventilating warehouse is recommended.
2,lubricant additive
3,engine oil additive
4,petrochemical
supply qty: 900M T
additives ,engine oil additive, lubricant additive
ANTIWEAR HYDRAULIC OIL ADDITIVE
0.8%-1.0%
V3966
BRIEF INTRODUCTION
This product is antiwear hydraulic fluid additive package. It is brown liquid. The recommended dosage is 1.0% for blending high quality antiwear hydraulic oil that can meet the requirements of first-class GB11118.1-94 L-HM hydraulic oil and NFE-603.
CHARACTERISTICS
Excellent extreme pressure performance
Good anti-wear, anti-oxidant, anti-corrosive and anti-rust ability
PRODUCT FEATURES AND TEST METHODS
ITEM
INDICE
TEST METHOD
Density (20°C), kg/m
3
950
GB/T1884
Flash point (open cup), °C
≥162
GB/T267
Sulfur, m%
≥5.0
GB/T388
Phosphorus, m%
≥3.6
SH/T0296
Zinc, m%
≥2.5
SH/T0226
PACKING AND STORAGE
Packing: The product is packed in 200 liter metal drum (net weight: 200 kg/drum).
Storage: Please refer to SH/T0164, for transportation, storage and oil blending. Keep the temperature not higher than 60°C. For long-term storage the suggested temperature is lower than 50°C. The dry, clean and ventilating warehouse is recommended.
Friday, March 4, 2011
adhesive activator
Adhesive Activator
Reduce bonding time
Higher bond strengths
RC Model Adhesive Activator drastically reduces the time needed for CA glue to set and create a storing bond between adhered pieces.
It is excellent to use with thick and medium CA adhesives to reduce build time and to create a strong, hard bond practically instantaneously.
Reduce bonding time
Higher bond strengths
RC Model Adhesive Activator drastically reduces the time needed for CA glue to set and create a storing bond between adhered pieces.
It is excellent to use with thick and medium CA adhesives to reduce build time and to create a strong, hard bond practically instantaneously.
adhesives C9&C5petroleum resin
highest quality
most competitive price
adopting advanced production technology
environmentally sound
most attentive service
C5&C9 Petroleum Resin
CAS No.68131-77-1
HS Code::39111000
UN No.:N/A
EC NO:
N/A
Property:
Flake and granula form solid of light yellow
Specification:
Specification
Test Method
Unit
TCC-100
TCC-110
TCC-120
Softening point
ASTM E28-58
90.0-100.0
101.0-110.0
111.0-120.0
Color & luster
ASTM D-1544
GC
4.0max ---------10.0max
Ash
ETM-E-99
Vo1 %
0.05max
0.05max
0.05max
Avid value
ASTM D-974
Vo1 %
0.3 max
0.3 max
0.4 max
Specific gravity
ASTM D71-72A
g/cm
3
0.99-1.03
0.99-1.03
0.99-1.03
Uses
Rubber tires, hot melt adhesives, solvent-based pressure-sensitive adhesive
Rubber tires, hot melt adhesives, solvent-based pressure-sensitive adhesive
ink, pressure-sensitive adhesive
Packing:
25kg PP. Bag, paper & PP. Compound bag, paper bag 500kg big bag.
16Mt/20’FCL with pallet. 19Mt/20’FCL without pallet.
Applications:
Paints; Rubber; Adhesive; Printing Ink; Traffic paint; Upper-coating-agent fo paper and additive of plastic
most competitive price
adopting advanced production technology
environmentally sound
most attentive service
C5&C9 Petroleum Resin
CAS No.68131-77-1
HS Code::39111000
UN No.:N/A
EC NO:
N/A
Property:
Flake and granula form solid of light yellow
Specification:
Specification
Test Method
Unit
TCC-100
TCC-110
TCC-120
Softening point
ASTM E28-58
90.0-100.0
101.0-110.0
111.0-120.0
Color & luster
ASTM D-1544
GC
4.0max ---------10.0max
Ash
ETM-E-99
Vo1 %
0.05max
0.05max
0.05max
Avid value
ASTM D-974
Vo1 %
0.3 max
0.3 max
0.4 max
Specific gravity
ASTM D71-72A
g/cm
3
0.99-1.03
0.99-1.03
0.99-1.03
Uses
Rubber tires, hot melt adhesives, solvent-based pressure-sensitive adhesive
Rubber tires, hot melt adhesives, solvent-based pressure-sensitive adhesive
ink, pressure-sensitive adhesive
Packing:
25kg PP. Bag, paper & PP. Compound bag, paper bag 500kg big bag.
16Mt/20’FCL with pallet. 19Mt/20’FCL without pallet.
Applications:
Paints; Rubber; Adhesive; Printing Ink; Traffic paint; Upper-coating-agent fo paper and additive of plastic
aerosol Silicone Oil Spray mould releaser
Plyfit Silicone oil Spray
1.Excellent mould-releasing effect
2.forms resisting film to prevent body adhesion
This Silicone oil spray (mould-releasing) can be applied in temperature between 60 to 150°C for mould-releasing in plastic and rubber industries as well as metallic casting mould. It forms the resisting film to prevent body adhesion, and will not corrode the body surface.
Features:
1) Excellent mould-releasing effect
2) Keeps lubricate
1.Excellent mould-releasing effect
2.forms resisting film to prevent body adhesion
This Silicone oil spray (mould-releasing) can be applied in temperature between 60 to 150°C for mould-releasing in plastic and rubber industries as well as metallic casting mould. It forms the resisting film to prevent body adhesion, and will not corrode the body surface.
Features:
1) Excellent mould-releasing effect
2) Keeps lubricate
air conditioner compressor oil R134a
Compressor oil R134a
brand name: domestic brand
minimum order:100 pcs
capacity:8.35g
cheap price
Compressor refrigeration oil R134a
Techinical specification:
Item
Testing method
RL32H
RL68H
RL100H
Viscosity at 40°C cSt
D445
32.5
65.5
98.8
Viscosityat 100°C cSt
D445
5.8
9.3
12.7
Pour Point °C
D97
-46
-39
-36
Density at 20°C
D1298
0.977
0.98
0.974
Flash Point °C
E92
258
270
270
WaterContent ppm
E1064-85
<40
<40
<40
Acid Value mg KOH/g
*
0.02
0.02
0.02
Colour Hazen
D1209
60
70
125
Our Company also provides more refrigeration products, such as,
Refrigerants series, refrigeration compressor, refrigeration accessories, frozen oil , refrigeration tools , copper tube and capacitance series.
brand name: domestic brand
minimum order:100 pcs
capacity:8.35g
cheap price
Compressor refrigeration oil R134a
Techinical specification:
Item
Testing method
RL32H
RL68H
RL100H
Viscosity at 40°C cSt
D445
32.5
65.5
98.8
Viscosityat 100°C cSt
D445
5.8
9.3
12.7
Pour Point °C
D97
-46
-39
-36
Density at 20°C
D1298
0.977
0.98
0.974
Flash Point °C
E92
258
270
270
WaterContent ppm
E1064-85
<40
<40
<40
Acid Value mg KOH/g
*
0.02
0.02
0.02
Colour Hazen
D1209
60
70
125
Our Company also provides more refrigeration products, such as,
Refrigerants series, refrigeration compressor, refrigeration accessories, frozen oil , refrigeration tools , copper tube and capacitance series.
all purpose MOULD RELEASE AGENT (PAINTABLE) FUKKOL
all purpose MOULD RELEASE AGENT
PLASTICS AND RUBBER NON-STAINING RELEASE OF FOR MOST TYPES OF PLASTIC INJECTION MOULDING
FUKKOL MOULD RELEASE AGENT
(PAINTABLE)
http://www.fukkol-lube.com/asp-bin/EN/?page=1
Description
FUKKOL PAINTABLE is an aerosol applied release agent formulated to provide a quick, effective,
non - staining
release of plastics and rubber for most types of
plastic injection moulding
.
In addition, it is specially designed for products subject to subsequent processes such as printing,
painting, plating, hot stamping and bonding operations without the so- called “SILICONE PROBLEMS”.
Benefits
-Ultra fine spray gives controlled application with
complete coverage
-Improved finish and
reduced risk
of over application
-Reduces problems associated with marking and
transporting, highly economical
, efficient release,
only one pass required for many shots of ejection.
-Effective and
long lasting film
provides more numbers of release than most silicone formulations
-Low environmental impact,
contains no CFC propellant
-Excellent for
all thermal plastic,
especially ABS and PS
-Will not affect subsequent operations.
-Excellent lubricant for
sewing threads
,
table surface
,
needles and knives
.
Precautions
*
Pressure container, protect from sunlight, store at temperature below 50°C
*
Do not puncture or incinerate
*
Do not spray onto flames
*
Inflammable
Typical Data
Propellant LPG
Solvent N. Hexane
Base Fluid EP Powder
Working Temperatrue Range Up to 270°C
PLASTICS AND RUBBER NON-STAINING RELEASE OF FOR MOST TYPES OF PLASTIC INJECTION MOULDING
FUKKOL MOULD RELEASE AGENT
(PAINTABLE)
http://www.fukkol-lube.com/asp-bin/EN/?page=1
Description
FUKKOL PAINTABLE is an aerosol applied release agent formulated to provide a quick, effective,
non - staining
release of plastics and rubber for most types of
plastic injection moulding
.
In addition, it is specially designed for products subject to subsequent processes such as printing,
painting, plating, hot stamping and bonding operations without the so- called “SILICONE PROBLEMS”.
Benefits
-Ultra fine spray gives controlled application with
complete coverage
-Improved finish and
reduced risk
of over application
-Reduces problems associated with marking and
transporting, highly economical
, efficient release,
only one pass required for many shots of ejection.
-Effective and
long lasting film
provides more numbers of release than most silicone formulations
-Low environmental impact,
contains no CFC propellant
-Excellent for
all thermal plastic,
especially ABS and PS
-Will not affect subsequent operations.
-Excellent lubricant for
sewing threads
,
table surface
,
needles and knives
.
Precautions
*
Pressure container, protect from sunlight, store at temperature below 50°C
*
Do not puncture or incinerate
*
Do not spray onto flames
*
Inflammable
Typical Data
Propellant LPG
Solvent N. Hexane
Base Fluid EP Powder
Working Temperatrue Range Up to 270°C
all purpose grease FUKKOL H.T Paste
1.used on ejectot pin
2.No carbonization,no melting,no flow out
3.1400 degree
4.White-coloured,non-staining,lubricity
FUKKOL H.T. PASTE
http://www.fukkol-lube.com/asp-bin/EN/?page=1
Pretty small consumption ,10gram for one set normally.
it can last around 8000 processing times
no carbonization, no melting and no flow out,great choose for food processing machine.
temperature(max)
1400 degree
operation condition
Low speed
,
oscillating motion
material (available)
steel
,
non-ferrous
metal screw
,
plug,
bayonet joints
.
product life cycle
8000 processing times/white film is destroy
Apply to
nuts and
bolts,sockcts and spindles in refurenes,
steel-and cement mills,
marine and agriculture
function characteristic
anti-seize, anti-wear,ant-corrosion,high temperature
chemical features
White-coloured
,
non-staining,dry film lubricant
additives
anti-oxidation,anti-corrosion,lubricants,etc
Environment
non-toxic,no ferrous metals,graphite,molybdenum-disulphide and sulphide
Certificate
FDA,SGS,ROSH
Typical physical properties
Appearance
White color
Basc
Synthetic oil compound with organic thickener
and combination of white solid lubricants
Unworked penetration
280-320
Specific gravity
1.2g/cc at 20°C
Dropping point
None
Base oil viscosity
21mm2/s at 40°C
Temperature range
-40°C~+1400°C
Friction value
0.10-0.13
Degree of corrosion
1-90
Depth of wear
0.3um
Salt spray test
>500 hours
Four-ball tester(VKA)
3800/4000N
Description:
A white non-carbonized-under-high-temperature lubricating paste for lubrication of all kinds of surfaces subject to high load,
particularly operation at low speed and/or
oscillating motion
and of
steel
and
non-ferrous
metal
screw
,
plug and bayonet joints
.
Applications:
-Anti-Seizing non-destructive disassembly of threaded conncetions subject to high temperatures,
i.e. at internal combustion engines and turbines oven after long service time.
-Corrosion protection for nuts and
bolts,sockcts and spindles in refurenes, steel-and cement mills,
marine and agriculture
.
Benefits:
-Best use-
ONE single paste for MANY application
s
;
-
White-coloured
,
non-staining
,
outstanding lubricity
-
High pressure
,
low friction
and
low wear resistance
, reliable
anti-seize
effect and
corrosion protection
.
-Economical and ecological solution for many plants and shops which have been depending
on a number of special pastes so far.
-contains organic active molybdenum additive for increased performance.
Environment:
Ecology - FUKKOL H.T PASTE is non-toxic,contains no ferrous metals and is free from graphite ,
molybdenum-disulphide and sulphide additives.
Typical physical properties
2.No carbonization,no melting,no flow out
3.1400 degree
4.White-coloured,non-staining,lubricity
FUKKOL H.T. PASTE
http://www.fukkol-lube.com/asp-bin/EN/?page=1
Pretty small consumption ,10gram for one set normally.
it can last around 8000 processing times
no carbonization, no melting and no flow out,great choose for food processing machine.
temperature(max)
1400 degree
operation condition
Low speed
,
oscillating motion
material (available)
steel
,
non-ferrous
metal screw
,
plug,
bayonet joints
.
product life cycle
8000 processing times/white film is destroy
Apply to
nuts and
bolts,sockcts and spindles in refurenes,
steel-and cement mills,
marine and agriculture
function characteristic
anti-seize, anti-wear,ant-corrosion,high temperature
chemical features
White-coloured
,
non-staining,dry film lubricant
additives
anti-oxidation,anti-corrosion,lubricants,etc
Environment
non-toxic,no ferrous metals,graphite,molybdenum-disulphide and sulphide
Certificate
FDA,SGS,ROSH
Typical physical properties
Appearance
White color
Basc
Synthetic oil compound with organic thickener
and combination of white solid lubricants
Unworked penetration
280-320
Specific gravity
1.2g/cc at 20°C
Dropping point
None
Base oil viscosity
21mm2/s at 40°C
Temperature range
-40°C~+1400°C
Friction value
0.10-0.13
Degree of corrosion
1-90
Depth of wear
0.3um
Salt spray test
>500 hours
Four-ball tester(VKA)
3800/4000N
Description:
A white non-carbonized-under-high-temperature lubricating paste for lubrication of all kinds of surfaces subject to high load,
particularly operation at low speed and/or
oscillating motion
and of
steel
and
non-ferrous
metal
screw
,
plug and bayonet joints
.
Applications:
-Anti-Seizing non-destructive disassembly of threaded conncetions subject to high temperatures,
i.e. at internal combustion engines and turbines oven after long service time.
-Corrosion protection for nuts and
bolts,sockcts and spindles in refurenes, steel-and cement mills,
marine and agriculture
.
Benefits:
-Best use-
ONE single paste for MANY application
s
;
-
White-coloured
,
non-staining
,
outstanding lubricity
-
High pressure
,
low friction
and
low wear resistance
, reliable
anti-seize
effect and
corrosion protection
.
-Economical and ecological solution for many plants and shops which have been depending
on a number of special pastes so far.
-contains organic active molybdenum additive for increased performance.
Environment:
Ecology - FUKKOL H.T PASTE is non-toxic,contains no ferrous metals and is free from graphite ,
molybdenum-disulphide and sulphide additives.
Typical physical properties
all purpose grease FUKKOL H.T Paste
1.used on ejectot pin
2.No carbonization,no melting,no flow out
3.1400 degree
4.White-coloured,non-staining,lubricity
FUKKOL H.T. PASTE
http://www.fukkol-lube.com/asp-bin/EN/?page=1
Pretty small consumption ,10gram for one set normally.
it can last around 8000 processing times
no carbonization, no melting and no flow out,great choose for food processing machine.
temperature(max)
1400 degree
operation condition
Low speed
,
oscillating motion
material (available)
steel
,
non-ferrous
metal screw
,
plug,
bayonet joints
.
product life cycle
8000 processing times/white film is destroy
Apply to
nuts and
bolts,sockcts and spindles in refurenes,
steel-and cement mills,
marine and agriculture
function characteristic
anti-seize, anti-wear,ant-corrosion,high temperature
chemical features
White-coloured
,
non-staining,dry film lubricant
additives
anti-oxidation,anti-corrosion,lubricants,etc
Environment
non-toxic,no ferrous metals,graphite,molybdenum-disulphide and sulphide
Certificate
FDA,SGS,ROSH
Typical physical properties
Appearance
White color
Basc
Synthetic oil compound with organic thickener
and combination of white solid lubricants
Unworked penetration
280-320
Specific gravity
1.2g/cc at 20°C
Dropping point
None
Base oil viscosity
21mm2/s at 40°C
Temperature range
-40°C~+1400°C
Friction value
0.10-0.13
Degree of corrosion
1-90
Depth of wear
0.3um
Salt spray test
>500 hours
Four-ball tester(VKA)
3800/4000N
Description:
A white non-carbonized-under-high-temperature lubricating paste for lubrication of all kinds of surfaces subject to high load,
particularly operation at low speed and/or
oscillating motion
and of
steel
and
non-ferrous
metal
screw
,
plug and bayonet joints
.
Applications:
-Anti-Seizing non-destructive disassembly of threaded conncetions subject to high temperatures,
i.e. at internal combustion engines and turbines oven after long service time.
-Corrosion protection for nuts and
bolts,sockcts and spindles in refurenes, steel-and cement mills,
marine and agriculture
.
Benefits:
-Best use-
ONE single paste for MANY application
s
;
-
White-coloured
,
non-staining
,
outstanding lubricity
-
High pressure
,
low friction
and
low wear resistance
, reliable
anti-seize
effect and
corrosion protection
.
-Economical and ecological solution for many plants and shops which have been depending
on a number of special pastes so far.
-contains organic active molybdenum additive for increased performance.
Environment:
Ecology - FUKKOL H.T PASTE is non-toxic,contains no ferrous metals and is free from graphite ,
molybdenum-disulphide and sulphide additives.
Typical physical properties
2.No carbonization,no melting,no flow out
3.1400 degree
4.White-coloured,non-staining,lubricity
FUKKOL H.T. PASTE
http://www.fukkol-lube.com/asp-bin/EN/?page=1
Pretty small consumption ,10gram for one set normally.
it can last around 8000 processing times
no carbonization, no melting and no flow out,great choose for food processing machine.
temperature(max)
1400 degree
operation condition
Low speed
,
oscillating motion
material (available)
steel
,
non-ferrous
metal screw
,
plug,
bayonet joints
.
product life cycle
8000 processing times/white film is destroy
Apply to
nuts and
bolts,sockcts and spindles in refurenes,
steel-and cement mills,
marine and agriculture
function characteristic
anti-seize, anti-wear,ant-corrosion,high temperature
chemical features
White-coloured
,
non-staining,dry film lubricant
additives
anti-oxidation,anti-corrosion,lubricants,etc
Environment
non-toxic,no ferrous metals,graphite,molybdenum-disulphide and sulphide
Certificate
FDA,SGS,ROSH
Typical physical properties
Appearance
White color
Basc
Synthetic oil compound with organic thickener
and combination of white solid lubricants
Unworked penetration
280-320
Specific gravity
1.2g/cc at 20°C
Dropping point
None
Base oil viscosity
21mm2/s at 40°C
Temperature range
-40°C~+1400°C
Friction value
0.10-0.13
Degree of corrosion
1-90
Depth of wear
0.3um
Salt spray test
>500 hours
Four-ball tester(VKA)
3800/4000N
Description:
A white non-carbonized-under-high-temperature lubricating paste for lubrication of all kinds of surfaces subject to high load,
particularly operation at low speed and/or
oscillating motion
and of
steel
and
non-ferrous
metal
screw
,
plug and bayonet joints
.
Applications:
-Anti-Seizing non-destructive disassembly of threaded conncetions subject to high temperatures,
i.e. at internal combustion engines and turbines oven after long service time.
-Corrosion protection for nuts and
bolts,sockcts and spindles in refurenes, steel-and cement mills,
marine and agriculture
.
Benefits:
-Best use-
ONE single paste for MANY application
s
;
-
White-coloured
,
non-staining
,
outstanding lubricity
-
High pressure
,
low friction
and
low wear resistance
, reliable
anti-seize
effect and
corrosion protection
.
-Economical and ecological solution for many plants and shops which have been depending
on a number of special pastes so far.
-contains organic active molybdenum additive for increased performance.
Environment:
Ecology - FUKKOL H.T PASTE is non-toxic,contains no ferrous metals and is free from graphite ,
molybdenum-disulphide and sulphide additives.
Typical physical properties
all purpose grease FUKKOL H.T Paste
1.used on ejectot pin
2.No carbonization,no melting,no flow out
3.1400 degree
4.White-coloured,non-staining,lubricity
FUKKOL H.T. PASTE
http://www.fukkol-lube.com/asp-bin/EN/?page=1
Pretty small consumption ,10gram for one set normally.
it can last around 8000 processing times
no carbonization, no melting and no flow out,great choose for food processing machine.
temperature(max)
1400 degree
operation condition
Low speed
,
oscillating motion
material (available)
steel
,
non-ferrous
metal screw
,
plug,
bayonet joints
.
product life cycle
8000 processing times/white film is destroy
Apply to
nuts and
bolts,sockcts and spindles in refurenes,
steel-and cement mills,
marine and agriculture
function characteristic
anti-seize, anti-wear,ant-corrosion,high temperature
chemical features
White-coloured
,
non-staining,dry film lubricant
additives
anti-oxidation,anti-corrosion,lubricants,etc
Environment
non-toxic,no ferrous metals,graphite,molybdenum-disulphide and sulphide
Certificate
FDA,SGS,ROSH
Typical physical properties
Appearance
White color
Basc
Synthetic oil compound with organic thickener
and combination of white solid lubricants
Unworked penetration
280-320
Specific gravity
1.2g/cc at 20°C
Dropping point
None
Base oil viscosity
21mm2/s at 40°C
Temperature range
-40°C~+1400°C
Friction value
0.10-0.13
Degree of corrosion
1-90
Depth of wear
0.3um
Salt spray test
>500 hours
Four-ball tester(VKA)
3800/4000N
Description:
A white non-carbonized-under-high-temperature lubricating paste for lubrication of all kinds of surfaces subject to high load,
particularly operation at low speed and/or
oscillating motion
and of
steel
and
non-ferrous
metal
screw
,
plug and bayonet joints
.
Applications:
-Anti-Seizing non-destructive disassembly of threaded conncetions subject to high temperatures,
i.e. at internal combustion engines and turbines oven after long service time.
-Corrosion protection for nuts and
bolts,sockcts and spindles in refurenes, steel-and cement mills,
marine and agriculture
.
Benefits:
-Best use-
ONE single paste for MANY application
s
;
-
White-coloured
,
non-staining
,
outstanding lubricity
-
High pressure
,
low friction
and
low wear resistance
, reliable
anti-seize
effect and
corrosion protection
.
-Economical and ecological solution for many plants and shops which have been depending
on a number of special pastes so far.
-contains organic active molybdenum additive for increased performance.
Environment:
Ecology - FUKKOL H.T PASTE is non-toxic,contains no ferrous metals and is free from graphite ,
molybdenum-disulphide and sulphide additives.
Typical physical properties
2.No carbonization,no melting,no flow out
3.1400 degree
4.White-coloured,non-staining,lubricity
FUKKOL H.T. PASTE
http://www.fukkol-lube.com/asp-bin/EN/?page=1
Pretty small consumption ,10gram for one set normally.
it can last around 8000 processing times
no carbonization, no melting and no flow out,great choose for food processing machine.
temperature(max)
1400 degree
operation condition
Low speed
,
oscillating motion
material (available)
steel
,
non-ferrous
metal screw
,
plug,
bayonet joints
.
product life cycle
8000 processing times/white film is destroy
Apply to
nuts and
bolts,sockcts and spindles in refurenes,
steel-and cement mills,
marine and agriculture
function characteristic
anti-seize, anti-wear,ant-corrosion,high temperature
chemical features
White-coloured
,
non-staining,dry film lubricant
additives
anti-oxidation,anti-corrosion,lubricants,etc
Environment
non-toxic,no ferrous metals,graphite,molybdenum-disulphide and sulphide
Certificate
FDA,SGS,ROSH
Typical physical properties
Appearance
White color
Basc
Synthetic oil compound with organic thickener
and combination of white solid lubricants
Unworked penetration
280-320
Specific gravity
1.2g/cc at 20°C
Dropping point
None
Base oil viscosity
21mm2/s at 40°C
Temperature range
-40°C~+1400°C
Friction value
0.10-0.13
Degree of corrosion
1-90
Depth of wear
0.3um
Salt spray test
>500 hours
Four-ball tester(VKA)
3800/4000N
Description:
A white non-carbonized-under-high-temperature lubricating paste for lubrication of all kinds of surfaces subject to high load,
particularly operation at low speed and/or
oscillating motion
and of
steel
and
non-ferrous
metal
screw
,
plug and bayonet joints
.
Applications:
-Anti-Seizing non-destructive disassembly of threaded conncetions subject to high temperatures,
i.e. at internal combustion engines and turbines oven after long service time.
-Corrosion protection for nuts and
bolts,sockcts and spindles in refurenes, steel-and cement mills,
marine and agriculture
.
Benefits:
-Best use-
ONE single paste for MANY application
s
;
-
White-coloured
,
non-staining
,
outstanding lubricity
-
High pressure
,
low friction
and
low wear resistance
, reliable
anti-seize
effect and
corrosion protection
.
-Economical and ecological solution for many plants and shops which have been depending
on a number of special pastes so far.
-contains organic active molybdenum additive for increased performance.
Environment:
Ecology - FUKKOL H.T PASTE is non-toxic,contains no ferrous metals and is free from graphite ,
molybdenum-disulphide and sulphide additives.
Typical physical properties
alumina ceramic ball
1.High crushing strength
2.Fracturing
3.Low solubility
4.direct manufacturer of Oil Ceramic
Alumina ceramic ball
the high quality bauxite as raw material, High crush resistance and best Roundness
Oil fracture ceramic proppant is the key material in low-permeability fracturing of oil and gas wells exploration. This products used in the construction of deep well fracturing, be filled to the low permeability of the rock deposits in the cracks, fracturing close to the high oil recovery operations, so that oil and gas cracked rock, support for propping fractures not close because of releasing force, thereby to maintain the high conductivity of oil and gas, not only can increase the oil and gas production output, also can extend the oil and gas wellss length of service.
2.Fracturing
3.Low solubility
4.direct manufacturer of Oil Ceramic
Alumina ceramic ball
the high quality bauxite as raw material, High crush resistance and best Roundness
Oil fracture ceramic proppant is the key material in low-permeability fracturing of oil and gas wells exploration. This products used in the construction of deep well fracturing, be filled to the low permeability of the rock deposits in the cracks, fracturing close to the high oil recovery operations, so that oil and gas cracked rock, support for propping fractures not close because of releasing force, thereby to maintain the high conductivity of oil and gas, not only can increase the oil and gas production output, also can extend the oil and gas wellss length of service.
Automatic Transmission Fluid (Dexron III)
Automatic Transmission Fluid (DexronIII):
Excellent quality as original U.S.A. brands and reasonable price,your best choice.
Automatic Transmission Fluid (Dexron III):
1) Excellent quality as original U.S.A. brands and reasonable price of Automatic Transmission Fluid (Dexron III) is your best choice.
2) This multi-purpose, high performance automatic transmission fluid Meets DEXRON-III(General Motors) and MERCON(fORD Motor) Specifications.
3) It is also recommended for power steering and hydraulic systems requiring Allison C-3, C-4 and Caterpillar TO-2 type fluids.
DESCRIPTION
Automatic Transmission Fluid(DEXRONIII)
Material Can
Plastic Bottle
PART NO.
PE-330-0.5
GROSS WEIGHT
0.5L
NET WEIGHT
425g
PCS/CTN
24
Carton Size
D43*W29*H19(cm)
G.W./CTN
11
CBM/CTN
0.024
CTN/20'
1167
CTN/40'
2667
DESCRIPTION
Automatic Transmission Fluid(DEXRONIII)
Material Can
Plastic Bottle
PART NO.
PE-330-1
GROSS WEIGHT
1L
NET WEIGHT
850g
PCS/CTN
12
Carton Size
D33*W25.5*H24(cm)
G.W./CTN
11
CBM/CTN
0.019
CTN/20'
1474
CTN/40'
3368
DESCRIPTION
Automatic Transmission Fluid(DEXRONIII)
Material Can
Plastic Bottle
PART NO.
PE-330-2
GROSS WEIGHT
2L
NET WEIGHT
1700g
PCS/CTN
12
Carton Size
D46.5*W33*H24(cm)
G.W./CTN
22
CBM/CTN
0.042
CTN/20'
667
CTN/40'
1524
DESCRIPTION
Automatic Transmission Fluid(DEXRONIII)
Material Can
Plastic Bottle
PART NO.
PE-330-5
GROSS WEIGHT
5L
NET WEIGHT
4250g
PCS/CTN
6
Carton Size
D50*W34*H32(cm)
G.W./CTN
28
CBM/CTN
0.054
CTN/20'
519
CTN/40'
1185
Excellent quality as original U.S.A. brands and reasonable price,your best choice.
Automatic Transmission Fluid (Dexron III):
1) Excellent quality as original U.S.A. brands and reasonable price of Automatic Transmission Fluid (Dexron III) is your best choice.
2) This multi-purpose, high performance automatic transmission fluid Meets DEXRON-III(General Motors) and MERCON(fORD Motor) Specifications.
3) It is also recommended for power steering and hydraulic systems requiring Allison C-3, C-4 and Caterpillar TO-2 type fluids.
DESCRIPTION
Automatic Transmission Fluid(DEXRONIII)
Material Can
Plastic Bottle
PART NO.
PE-330-0.5
GROSS WEIGHT
0.5L
NET WEIGHT
425g
PCS/CTN
24
Carton Size
D43*W29*H19(cm)
G.W./CTN
11
CBM/CTN
0.024
CTN/20'
1167
CTN/40'
2667
DESCRIPTION
Automatic Transmission Fluid(DEXRONIII)
Material Can
Plastic Bottle
PART NO.
PE-330-1
GROSS WEIGHT
1L
NET WEIGHT
850g
PCS/CTN
12
Carton Size
D33*W25.5*H24(cm)
G.W./CTN
11
CBM/CTN
0.019
CTN/20'
1474
CTN/40'
3368
DESCRIPTION
Automatic Transmission Fluid(DEXRONIII)
Material Can
Plastic Bottle
PART NO.
PE-330-2
GROSS WEIGHT
2L
NET WEIGHT
1700g
PCS/CTN
12
Carton Size
D46.5*W33*H24(cm)
G.W./CTN
22
CBM/CTN
0.042
CTN/20'
667
CTN/40'
1524
DESCRIPTION
Automatic Transmission Fluid(DEXRONIII)
Material Can
Plastic Bottle
PART NO.
PE-330-5
GROSS WEIGHT
5L
NET WEIGHT
4250g
PCS/CTN
6
Carton Size
D50*W34*H32(cm)
G.W./CTN
28
CBM/CTN
0.054
CTN/20'
519
CTN/40'
1185
aluminum-complex-thichened grease AC 2
1,aluminum-complex-thichened grease, formulated with food grade base oils.
2,pass NSF H-1 standard for incidental food contact
Distributor Wanted
PRODUCT DESCRIPTION
Archine Foodcare AC 2 is an aluminum-complex-thichened grease, formulated with food grade base oils. Its unique formulation allow it to pass the NSF H-1 standard for incidental food contact. Archine Foodcare AC 2 has a higher dropping point than traditional aluminum-complex grease.It is white in appearance and has smooth,buttery consistency.
TYPICAL USE
Used for the lubricating of all types of grease bearings commonly found in canneries,beverage bottling plants, potato chip plants, poutry processing plants,meat processing plants and other food processing plants..
Complies with NSF H-1 Registration.
FEATURES
Multi-purpose food machinery greases for many applications-reduced inventory.
High temperature protection
Excellent rust protection
Virtually no oil separation
Adhesive tacky grease that stays in place.
Cost effective food grade lubricant
Compatible with aluminum,calcium 12-hydroxy and lithium complexed grease
TYPICAL PROPERTIES
NLGI
2
Penetration@77°F.(WORKED)
280
Dropping Point, °F
550
Color
White
Appearance
Smooth
Weld Load,KG,Min
250
Water Washout,WT%
2.5
Oil Seperation,WT%
1.7
Four Ball Wear,mm
0.75
2,pass NSF H-1 standard for incidental food contact
Distributor Wanted
PRODUCT DESCRIPTION
Archine Foodcare AC 2 is an aluminum-complex-thichened grease, formulated with food grade base oils. Its unique formulation allow it to pass the NSF H-1 standard for incidental food contact. Archine Foodcare AC 2 has a higher dropping point than traditional aluminum-complex grease.It is white in appearance and has smooth,buttery consistency.
TYPICAL USE
Used for the lubricating of all types of grease bearings commonly found in canneries,beverage bottling plants, potato chip plants, poutry processing plants,meat processing plants and other food processing plants..
Complies with NSF H-1 Registration.
FEATURES
Multi-purpose food machinery greases for many applications-reduced inventory.
High temperature protection
Excellent rust protection
Virtually no oil separation
Adhesive tacky grease that stays in place.
Cost effective food grade lubricant
Compatible with aluminum,calcium 12-hydroxy and lithium complexed grease
TYPICAL PROPERTIES
NLGI
2
Penetration@77°F.(WORKED)
280
Dropping Point, °F
550
Color
White
Appearance
Smooth
Weld Load,KG,Min
250
Water Washout,WT%
2.5
Oil Seperation,WT%
1.7
Four Ball Wear,mm
0.75
aluminum-complex-thichened grease AC 2
1,aluminum-complex-thichened grease,food grade base oils.
2,NSF H-1, korsher, halal certificate
3, NSF H1,H2,H3,3H
Distributor Wanted
PRODUCT DESCRIPTION
Archine Foodcare AC 2 is an aluminum-complex-thichened grease, formulated with food grade base oils. Its unique formulation allow it to pass the NSF H-1 standard for incidental food contact. Archine Foodcare AC 2 has a higher dropping point than traditional aluminum-complex grease.It is white in appearance and has smooth,buttery consistency.
TYPICAL USE
Used for the lubricating of all types of grease bearings commonly found in canneries,beverage bottling plants, potato chip plants, poutry processing plants,meat processing plants and other food processing plants..
Complies with NSF H-1 Registration.
FEATURES
Multi-purpose food machinery greases for many applications-reduced inventory.
High temperature protection
Excellent rust protection
Virtually no oil separation
Adhesive tacky grease that stays in place.
Cost effective food grade lubricant
Compatible with aluminum,calcium 12-hydroxy and lithium complexed grease
TYPICAL PROPERTIES
NLGI
2
Penetration@77°F.(WORKED)
280
Dropping Point, °F
550
Color
White
Appearance
Smooth
Weld Load,KG,Min
250
Water Washout,WT%
2.5
Oil Seperation,WT%
1.7
Four Ball Wear,mm
0.75
2,NSF H-1, korsher, halal certificate
3, NSF H1,H2,H3,3H
Distributor Wanted
PRODUCT DESCRIPTION
Archine Foodcare AC 2 is an aluminum-complex-thichened grease, formulated with food grade base oils. Its unique formulation allow it to pass the NSF H-1 standard for incidental food contact. Archine Foodcare AC 2 has a higher dropping point than traditional aluminum-complex grease.It is white in appearance and has smooth,buttery consistency.
TYPICAL USE
Used for the lubricating of all types of grease bearings commonly found in canneries,beverage bottling plants, potato chip plants, poutry processing plants,meat processing plants and other food processing plants..
Complies with NSF H-1 Registration.
FEATURES
Multi-purpose food machinery greases for many applications-reduced inventory.
High temperature protection
Excellent rust protection
Virtually no oil separation
Adhesive tacky grease that stays in place.
Cost effective food grade lubricant
Compatible with aluminum,calcium 12-hydroxy and lithium complexed grease
TYPICAL PROPERTIES
NLGI
2
Penetration@77°F.(WORKED)
280
Dropping Point, °F
550
Color
White
Appearance
Smooth
Weld Load,KG,Min
250
Water Washout,WT%
2.5
Oil Seperation,WT%
1.7
Four Ball Wear,mm
0.75
anionic polyacrylamide APAM as thickner in textitle
APAM:
1.ISO9001:2000;
2,Mainly used in chemical industry;
3.Widely used for oilfield as flocculation etc
Anionic Polyacrylamide APAM:
Product Description:
Polyacrylamide referred to as PAM, also known as on the 3rd cohesion agent, formula CONH2 [CH2-ch] n, is a linear water-soluble polymers, the molecular weight between 300-1800 million, appearance is white or colorless powder viscous gel-like, odorless, neutral, soluble in water, when the temperature exceeds 120 easy to decompose.It fully in line with ISO 9001:2000,mainly used in chemical industry,widely used for oilfield as flocculation etc.
Main Application:
Anionic PAM: Oil-displacing agent of oil field tertiary oil recovery:
It can adjust the rheology of filled water, increase the viscosity of driving liquid, improve water drive wave and efficiency, lower water phase permeability in ground layer, and enable water and oil to flow forward at even speed. Its effect is that it is mainly used in tertiary oil recovery of oil fields in the aspect oil production, and raw oil of about 100 to 150ton more can be produced through filling the macromolecule polyacrylamide product one ton.
Anionic PAM: Well drilling mud raw materials:
in oil field exploration and development and exploration of geology, water and coal, it is used as adhesive of well drilling mud raw materials, can improve the service life of drill bits, improve the drill speed and drilling footage, and reduce plug in replacing drill, and has prominent well slough preventing effect, and it can be used as fracturing fluid of oil fields or plugging agent of controlling profile and plugging water.
Anionic PAM: Industrial Waste Water Treatment:
It has the best effect in particular in processing sewage water with suspended particulate, thicker size, high concentration, positive charge particle, neutral or alkalescence water PH value, waste water of iron and steel plants, waste water of electroplating factory, metallurgy waste water, coal washing waste water and other waste water.
Anionic PAM: Drinking Water Treatment:
Water sources of many tap water factories in China come from rivers, the sand and mineral contents are higher, water is muddy, the water still can not achieve demands although passing through sedimentation and filtration, and flocculating agent needs adding; however huge adding amount generates increased mud amount and bad effect. The adding amount is only 1/50 of inorganic flocculating agent if anionic-polyacrylamide is adopted as flocculating agent, but the effect is several times better than the organic flocculating agent, and even dozens of times. If the river water with severe organic matter pollution can be matched with anionic-polyacrylamide for use, the effect will be better.
Anionic PAM: Paper-making adhesive:
The product can be used as fining agent, residency agent, filtration aid and paper dry and wet intensity reinforcing agent in paper-making industry.
1.ISO9001:2000;
2,Mainly used in chemical industry;
3.Widely used for oilfield as flocculation etc
Anionic Polyacrylamide APAM:
Product Description:
Polyacrylamide referred to as PAM, also known as on the 3rd cohesion agent, formula CONH2 [CH2-ch] n, is a linear water-soluble polymers, the molecular weight between 300-1800 million, appearance is white or colorless powder viscous gel-like, odorless, neutral, soluble in water, when the temperature exceeds 120 easy to decompose.It fully in line with ISO 9001:2000,mainly used in chemical industry,widely used for oilfield as flocculation etc.
Main Application:
Anionic PAM: Oil-displacing agent of oil field tertiary oil recovery:
It can adjust the rheology of filled water, increase the viscosity of driving liquid, improve water drive wave and efficiency, lower water phase permeability in ground layer, and enable water and oil to flow forward at even speed. Its effect is that it is mainly used in tertiary oil recovery of oil fields in the aspect oil production, and raw oil of about 100 to 150ton more can be produced through filling the macromolecule polyacrylamide product one ton.
Anionic PAM: Well drilling mud raw materials:
in oil field exploration and development and exploration of geology, water and coal, it is used as adhesive of well drilling mud raw materials, can improve the service life of drill bits, improve the drill speed and drilling footage, and reduce plug in replacing drill, and has prominent well slough preventing effect, and it can be used as fracturing fluid of oil fields or plugging agent of controlling profile and plugging water.
Anionic PAM: Industrial Waste Water Treatment:
It has the best effect in particular in processing sewage water with suspended particulate, thicker size, high concentration, positive charge particle, neutral or alkalescence water PH value, waste water of iron and steel plants, waste water of electroplating factory, metallurgy waste water, coal washing waste water and other waste water.
Anionic PAM: Drinking Water Treatment:
Water sources of many tap water factories in China come from rivers, the sand and mineral contents are higher, water is muddy, the water still can not achieve demands although passing through sedimentation and filtration, and flocculating agent needs adding; however huge adding amount generates increased mud amount and bad effect. The adding amount is only 1/50 of inorganic flocculating agent if anionic-polyacrylamide is adopted as flocculating agent, but the effect is several times better than the organic flocculating agent, and even dozens of times. If the river water with severe organic matter pollution can be matched with anionic-polyacrylamide for use, the effect will be better.
Anionic PAM: Paper-making adhesive:
The product can be used as fining agent, residency agent, filtration aid and paper dry and wet intensity reinforcing agent in paper-making industry.
anionic polyacrylamide APAM widely used in oil drilling
APAM:
1.ISO9001:2000;
2,Mainly used in chemical industry;
3.Widely used for oilfield as flocculation etc
Anionic Polyacrylamide APAM:
Product Description:
Polyacrylamide referred to as PAM, also known as on the 3rd cohesion agent, formula CONH2 [CH2-ch] n, is a linear water-soluble polymers, the molecular weight between 300-1800 million, appearance is white or colorless powder viscous gel-like, odorless, neutral, soluble in water, when the temperature exceeds 120 easy to decompose.It fully in line with ISO 9001:2000,mainly used in chemical industry,widely used for oilfield as flocculation etc.
Main Application:
Anionic PAM: Oil-displacing agent of oil field tertiary oil recovery:
It can adjust the rheology of filled water, increase the viscosity of driving liquid, improve water drive wave and efficiency, lower water phase permeability in ground layer, and enable water and oil to flow forward at even speed. Its effect is that it is mainly used in tertiary oil recovery of oil fields in the aspect oil production, and raw oil of about 100 to 150ton more can be produced through filling the macromolecule polyacrylamide product one ton.
Anionic PAM: Well drilling mud raw materials:
in oil field exploration and development and exploration of geology, water and coal, it is used as adhesive of well drilling mud raw materials, can improve the service life of drill bits, improve the drill speed and drilling footage, and reduce plug in replacing drill, and has prominent well slough preventing effect, and it can be used as fracturing fluid of oil fields or plugging agent of controlling profile and plugging water.
Anionic PAM: Industrial Waste Water Treatment:
It has the best effect in particular in processing sewage water with suspended particulate, thicker size, high concentration, positive charge particle, neutral or alkalescence water PH value, waste water of iron and steel plants, waste water of electroplating factory, metallurgy waste water, coal washing waste water and other waste water.
Anionic PAM: Drinking Water Treatment:
Water sources of many tap water factories in China come from rivers, the sand and mineral contents are higher, water is muddy, the water still can not achieve demands although passing through sedimentation and filtration, and flocculating agent needs adding; however huge adding amount generates increased mud amount and bad effect. The adding amount is only 1/50 of inorganic flocculating agent if anionic-polyacrylamide is adopted as flocculating agent, but the effect is several times better than the organic flocculating agent, and even dozens of times. If the river water with severe organic matter pollution can be matched with anionic-polyacrylamide for use, the effect will be better.
Anionic PAM: Paper-making adhesive:
The product can be used as fining agent, residency agent, filtration aid and paper dry and wet intensity reinforcing agent in paper-making industry.
1.ISO9001:2000;
2,Mainly used in chemical industry;
3.Widely used for oilfield as flocculation etc
Anionic Polyacrylamide APAM:
Product Description:
Polyacrylamide referred to as PAM, also known as on the 3rd cohesion agent, formula CONH2 [CH2-ch] n, is a linear water-soluble polymers, the molecular weight between 300-1800 million, appearance is white or colorless powder viscous gel-like, odorless, neutral, soluble in water, when the temperature exceeds 120 easy to decompose.It fully in line with ISO 9001:2000,mainly used in chemical industry,widely used for oilfield as flocculation etc.
Main Application:
Anionic PAM: Oil-displacing agent of oil field tertiary oil recovery:
It can adjust the rheology of filled water, increase the viscosity of driving liquid, improve water drive wave and efficiency, lower water phase permeability in ground layer, and enable water and oil to flow forward at even speed. Its effect is that it is mainly used in tertiary oil recovery of oil fields in the aspect oil production, and raw oil of about 100 to 150ton more can be produced through filling the macromolecule polyacrylamide product one ton.
Anionic PAM: Well drilling mud raw materials:
in oil field exploration and development and exploration of geology, water and coal, it is used as adhesive of well drilling mud raw materials, can improve the service life of drill bits, improve the drill speed and drilling footage, and reduce plug in replacing drill, and has prominent well slough preventing effect, and it can be used as fracturing fluid of oil fields or plugging agent of controlling profile and plugging water.
Anionic PAM: Industrial Waste Water Treatment:
It has the best effect in particular in processing sewage water with suspended particulate, thicker size, high concentration, positive charge particle, neutral or alkalescence water PH value, waste water of iron and steel plants, waste water of electroplating factory, metallurgy waste water, coal washing waste water and other waste water.
Anionic PAM: Drinking Water Treatment:
Water sources of many tap water factories in China come from rivers, the sand and mineral contents are higher, water is muddy, the water still can not achieve demands although passing through sedimentation and filtration, and flocculating agent needs adding; however huge adding amount generates increased mud amount and bad effect. The adding amount is only 1/50 of inorganic flocculating agent if anionic-polyacrylamide is adopted as flocculating agent, but the effect is several times better than the organic flocculating agent, and even dozens of times. If the river water with severe organic matter pollution can be matched with anionic-polyacrylamide for use, the effect will be better.
Anionic PAM: Paper-making adhesive:
The product can be used as fining agent, residency agent, filtration aid and paper dry and wet intensity reinforcing agent in paper-making industry.
anti seizure lubricant for waterjet machine
oil-based thread anti seizure is an important spare parts for waterjet machines...
oil-based thread anti seizure
Bitongtech is a manufacturer of waterjet machine and waterjet spare parts.
Blue goop is an oil-based thread lubricant and it is part of waterjet cutting machine
for use on stainless steel, steel and so on.
Nanjing Bitong Technology Co., Ltd., a China-American joint venture of waterjet manufactureing and service. It is a workd's leading manufacturer of ultra high pressure waterjet and CNC waterjet. The brand name is BTECH. Our main products are waterjet cutting machines and waterjet cleaning machines. With many years' experience in waterjet technical study and the cooperation with American company, we supply high quality products and competitive prices. Now, we are one of the most famous waterjet enterprises in China. Bitong Technology Co. Ltd is the sole distributor and parter with USA waterjet manufacturer . Bitong's waterjet products are CE certified.
We are government authorized import and export agent. BTECH products have been exported to many countries such as USA, Canada, Russia, Austrinia, Coratia, Romania, Mexico, Argentina, Brazil, Pakistan, India.
oil-based thread anti seizure
Bitongtech is a manufacturer of waterjet machine and waterjet spare parts.
Blue goop is an oil-based thread lubricant and it is part of waterjet cutting machine
for use on stainless steel, steel and so on.
Nanjing Bitong Technology Co., Ltd., a China-American joint venture of waterjet manufactureing and service. It is a workd's leading manufacturer of ultra high pressure waterjet and CNC waterjet. The brand name is BTECH. Our main products are waterjet cutting machines and waterjet cleaning machines. With many years' experience in waterjet technical study and the cooperation with American company, we supply high quality products and competitive prices. Now, we are one of the most famous waterjet enterprises in China. Bitong Technology Co. Ltd is the sole distributor and parter with USA waterjet manufacturer . Bitong's waterjet products are CE certified.
We are government authorized import and export agent. BTECH products have been exported to many countries such as USA, Canada, Russia, Austrinia, Coratia, Romania, Mexico, Argentina, Brazil, Pakistan, India.
anti wear hydraulic oil
anti wear hydraulic oil
Blended with mineral base oil and well-chosen additive, suitable for all hydraulic systems.
anti wear hydraulic oil
1. Features:
Anti wear oil can be devided into five ranks(22, 32, 46, 68 and 100) by the kinematic viscosity at 40°C. It provides high oxidation stability, excellent demulsibility, rust and oxidation protection, control of foam and air release properties and good demulsibility properties in the presence of water.
2. Application:
Applicated in all hydraulic systems, as the replacement of machinery oil.
3. Product Standard:
Meets GB1118.1- L-HM
Blended with mineral base oil and well-chosen additive, suitable for all hydraulic systems.
anti wear hydraulic oil
1. Features:
Anti wear oil can be devided into five ranks(22, 32, 46, 68 and 100) by the kinematic viscosity at 40°C. It provides high oxidation stability, excellent demulsibility, rust and oxidation protection, control of foam and air release properties and good demulsibility properties in the presence of water.
2. Application:
Applicated in all hydraulic systems, as the replacement of machinery oil.
3. Product Standard:
Meets GB1118.1- L-HM
anti-burned no melting injector pin grease
anti-burned no melting injector pin grease
Can stand until 1400 degree
NO Carbonization,No Outflow,No Melting
anti-burned ,no melting injector pin grease
Description:
A white non-carbonized-under-high-temperature(
1400degree
) lubricating paste for lubrication of
all kinds of surfaces subject
to high load,
particularly operation at low speed and/or oscillating motion and of steel and non-ferrous metal screw ,
plug and bayonet joints.
Applications:
-
Anti-Seizlng
non-destructive disassembly of threaded conncetions subject to high temperatures,
i.e. at internal combustion engines and turbines oven after long service time.
-Corrosion protection for nuts and bolts,sockcts and spindles in refurenes, steel-and cement mills,
marine and agriculture.
Benefits:
-Best use-ONE single paste for MANY applications;
-
White-coloured, non-staining, outstanding lubricity
-
High pressure, low friction and low wear resistance, reliable anti-serze effect and corrosion protection.
-Economical and ecological solution for many plants and shops which have been depending on a number of special pastes so far.
-contains organic active molybdenum additive for increased performance.
-
No Outflow
---During Plastic injection Process it would not "contaminant"plastic parts.
-
No Melting
--It has high heart resistibility until 1400 degree
-
No Caronization
--Nano ceramic powder has resistbiliby to "Carbonizing"even at 1400 degree temperature.
Environment:
Ecology - FUKKOL H.T PASTE is non-toxic,contains
no ferrous metals
and
is free from graphite
,
molybdenum-disulphide and sulphide additives.
Typical physical properties
Appearance
White color
Basic
Synthetic oil compound with organic thickener and combination of white solid lubricants
Unworked penetration
280-320
Specific gravity
1.2g/cc at 20°C
Dropping point
None
Base oil viscosity
21mm2/s at 40°C
Temperature range
-40°C~+1400°C
Friction value
0.10-0.13
Degree of corrosion
1-90
Depth of wear
0.3um
Salt spray test
>500 hours
Four-ball tester
3800/4000N
Can stand until 1400 degree
NO Carbonization,No Outflow,No Melting
anti-burned ,no melting injector pin grease
Description:
A white non-carbonized-under-high-temperature(
1400degree
) lubricating paste for lubrication of
all kinds of surfaces subject
to high load,
particularly operation at low speed and/or oscillating motion and of steel and non-ferrous metal screw ,
plug and bayonet joints.
Applications:
-
Anti-Seizlng
non-destructive disassembly of threaded conncetions subject to high temperatures,
i.e. at internal combustion engines and turbines oven after long service time.
-Corrosion protection for nuts and bolts,sockcts and spindles in refurenes, steel-and cement mills,
marine and agriculture.
Benefits:
-Best use-ONE single paste for MANY applications;
-
White-coloured, non-staining, outstanding lubricity
-
High pressure, low friction and low wear resistance, reliable anti-serze effect and corrosion protection.
-Economical and ecological solution for many plants and shops which have been depending on a number of special pastes so far.
-contains organic active molybdenum additive for increased performance.
-
No Outflow
---During Plastic injection Process it would not "contaminant"plastic parts.
-
No Melting
--It has high heart resistibility until 1400 degree
-
No Caronization
--Nano ceramic powder has resistbiliby to "Carbonizing"even at 1400 degree temperature.
Environment:
Ecology - FUKKOL H.T PASTE is non-toxic,contains
no ferrous metals
and
is free from graphite
,
molybdenum-disulphide and sulphide additives.
Typical physical properties
Appearance
White color
Basic
Synthetic oil compound with organic thickener and combination of white solid lubricants
Unworked penetration
280-320
Specific gravity
1.2g/cc at 20°C
Dropping point
None
Base oil viscosity
21mm2/s at 40°C
Temperature range
-40°C~+1400°C
Friction value
0.10-0.13
Degree of corrosion
1-90
Depth of wear
0.3um
Salt spray test
>500 hours
Four-ball tester
3800/4000N
anti-rust lubricant spray
lubricant spray:form a protective film isolating humidity and air.It has excellent penetrability,derusting and lubricating effec
lubricant spray:
Package: 450ml/can,24 cans per carton
Carton Size: 410*270*210mm
Validity:2 years
Features
This anti-rust aerosol contains special element which can form a protective film isolating humidity and air. It has excellent penetrability, derusting and lubricating effect, which makes chains and gear of the car or motorcycle more agility. It can protect the precision instruments, electrical connector, steel parts and other sensitive components from rusted and corrosion. It is also effectly to avoid the squeak of door hinge, iron gate, electric parts and chairs.
Application
It can be used for vehicle, ship, machines, precision instruments,and house equipments, etc. Widely applied for screw, screw cap,car keyhole, gear and other rusty parts.
lubricant spray:
Package: 450ml/can,24 cans per carton
Carton Size: 410*270*210mm
Validity:2 years
Features
This anti-rust aerosol contains special element which can form a protective film isolating humidity and air. It has excellent penetrability, derusting and lubricating effect, which makes chains and gear of the car or motorcycle more agility. It can protect the precision instruments, electrical connector, steel parts and other sensitive components from rusted and corrosion. It is also effectly to avoid the squeak of door hinge, iron gate, electric parts and chairs.
Application
It can be used for vehicle, ship, machines, precision instruments,and house equipments, etc. Widely applied for screw, screw cap,car keyhole, gear and other rusty parts.
anti-rust water
Can effectively protect the mold, to meet the low degree of difficulty of the stainless steel stamping tensile process requirem
BT-17
Stainless steel stamping tensile oil
This product is refined mineral oil based compound into the extreme pressure, oil and rust, and other special additives made with good lubricity, extreme pressure anti-wear, rust and oxidation stability and so on. Can effectively protect the mold, to meet the low degree of difficulty of the stainless steel stamping tensile process requirements.
Uses:
Devoted to the low degree of difficulty of stamping drawing process of stainless steel sheet when the lubrication. Low viscosity, easy to paint, easy to clean, does not affect the surface after the sequence.
Usage:
Using the process is simple, free brush, dip or spray method, directly to the oil applied to the workpiece.
Technical parameters:
Test Project
Technical parameters
Test Method
Appearance
Dark brown oily liquid
Head Measurement
Kinematic viscosity (40 °C) mm / s
110
GB/T265 - 88
Flash point (open) °C
Not less than 160 °C
GB/267 - 88
Sediment
No
Head Measurement
Mechanical impurities
No
GB/T511 - 88
BT-17
Stainless steel stamping tensile oil
This product is refined mineral oil based compound into the extreme pressure, oil and rust, and other special additives made with good lubricity, extreme pressure anti-wear, rust and oxidation stability and so on. Can effectively protect the mold, to meet the low degree of difficulty of the stainless steel stamping tensile process requirements.
Uses:
Devoted to the low degree of difficulty of stamping drawing process of stainless steel sheet when the lubrication. Low viscosity, easy to paint, easy to clean, does not affect the surface after the sequence.
Usage:
Using the process is simple, free brush, dip or spray method, directly to the oil applied to the workpiece.
Technical parameters:
Test Project
Technical parameters
Test Method
Appearance
Dark brown oily liquid
Head Measurement
Kinematic viscosity (40 °C) mm / s
110
GB/T265 - 88
Flash point (open) °C
Not less than 160 °C
GB/267 - 88
Sediment
No
Head Measurement
Mechanical impurities
No
GB/T511 - 88
anti-rust water
Can effectively protect the mold, stainless steel products to avoid "pull flower" and "pull explosion", "wrinkle" and so on.
BT-16
Stainless steel
stamping tensile oil
This product is refined mineral oil based compound into the extreme pressure, oil and rust, and other special additives made with good lubricity, extreme pressure anti-wear, rust and oxidation stability and so on. Can effectively protect the mold, stainless steel products to avoid "pull flower" and "pull explosion", "wrinkle" and so on.
Uses:
Specifically for stainless steel tableware, kitchenware and other stainless steel sheet stretching.
Technical parameters:
Test Project
Technical parameters
Test Method
Appearance
Light-colored transparent oily liquid
Head Measurement
Kinematic viscosity (40 °C) mm
2
/ s / S
250
GB/T265 - 88
Flash point (open) °C
Not less than 180 °C
GB/267 - 88
Sediment
No
Head Measurement
Mechanical impurities
No
GB/T511 - 88
Features:
Good boundary lubrication
BT-16
Stainless steel
stamping tensile oil
This product is refined mineral oil based compound into the extreme pressure, oil and rust, and other special additives made with good lubricity, extreme pressure anti-wear, rust and oxidation stability and so on. Can effectively protect the mold, stainless steel products to avoid "pull flower" and "pull explosion", "wrinkle" and so on.
Uses:
Specifically for stainless steel tableware, kitchenware and other stainless steel sheet stretching.
Technical parameters:
Test Project
Technical parameters
Test Method
Appearance
Light-colored transparent oily liquid
Head Measurement
Kinematic viscosity (40 °C) mm
2
/ s / S
250
GB/T265 - 88
Flash point (open) °C
Not less than 180 °C
GB/267 - 88
Sediment
No
Head Measurement
Mechanical impurities
No
GB/T511 - 88
Features:
Good boundary lubrication
Automatic Transmission Fluid(Dexron III)
Atomatic Tansmission Fluid(Dexron III)
Excellent quality as original U.S.A. brands and reasonable rice,your best choice.
Automatic Transmission Fluid(Dexron III)
1) Excellent quality as original U.S.A. brands and reasonable price of Automatic Transmission Fluid (Dexron III) is your best choice.
2) This multi-purpose, high performance automatic transmission fluid Meets DEXRON-III(General Motors) and MERCON(fORD Motor) Specifications.
3) It is also recommended for power steering and hydraulic systems requiring Allison C-3, C-4 and Caterpillar TO-2 type fluids.
DESCRIPTION
Automatic Transmission Fluid(DEXRONIII)
Material Can
Plastic Bottle
PART NO.
PE-330-0.5
GROSS WEIGHT
0.5L
NET WEIGHT
425g
PCS/CTN
24
Carton Size
D43*W29*H19(cm)
G.W./CTN
11
CBM/CTN
0.024
CTN/20'
1167
CTN/40'
2667
Excellent quality as original U.S.A. brands and reasonable rice,your best choice.
Automatic Transmission Fluid(Dexron III)
1) Excellent quality as original U.S.A. brands and reasonable price of Automatic Transmission Fluid (Dexron III) is your best choice.
2) This multi-purpose, high performance automatic transmission fluid Meets DEXRON-III(General Motors) and MERCON(fORD Motor) Specifications.
3) It is also recommended for power steering and hydraulic systems requiring Allison C-3, C-4 and Caterpillar TO-2 type fluids.
DESCRIPTION
Automatic Transmission Fluid(DEXRONIII)
Material Can
Plastic Bottle
PART NO.
PE-330-0.5
GROSS WEIGHT
0.5L
NET WEIGHT
425g
PCS/CTN
24
Carton Size
D43*W29*H19(cm)
G.W./CTN
11
CBM/CTN
0.024
CTN/20'
1167
CTN/40'
2667
anti-seize FUKKOL H.T. Paste
1.used on ejectot pin
2.No carbonization,no melting,no flow out
3.1400 degree
4.White-coloured,non-staining,lubricity
FUKKOL H.T. PASTE
http://www.fukkol-lube.com/asp-bin/EN/?page=1
Pretty small consumption ,10gram for one set normally.
it can last around 8000 processing times
no carbonization, no melting and no flow out,great choose for food processing machine.
temperature(max)
1400 degree
operation condition
Low speed
,
oscillating motion
material (available)
steel
,
non-ferrous
metal screw
,
plug,
bayonet joints
.
product life cycle
8000 processing times/white film is destroy
Apply to
nuts and
bolts,sockcts and spindles in refurenes,
steel-and cement mills,
marine and agriculture
function characteristic
anti-seize, anti-wear,ant-corrosion,high temperature
chemical features
White-coloured
,
non-staining,dry film lubricant
additives
anti-oxidation,anti-corrosion,lubricants,etc
Environment
non-toxic,no ferrous metals,graphite,molybdenum-disulphide and sulphide
Certificate
FDA,SGS,ROSH
Typical physical properties
Appearance
White color
Basc
Synthetic oil compound with organic thickener
and combination of white solid lubricants
Unworked penetration
280-320
Specific gravity
1.2g/cc at 20°C
Dropping point
None
Base oil viscosity
21mm2/s at 40°C
Temperature range
-40°C~+1400°C
Friction value
0.10-0.13
Degree of corrosion
1-90
Depth of wear
0.3um
Salt spray test
>500 hours
Four-ball tester(VKA)
3800/4000N
Description:
A white non-carbonized-under-high-temperature lubricating paste for lubrication of all kinds of surfaces subject to high load,
particularly operation at low speed and/or
oscillating motion
and of
steel
and
non-ferrous
metal
screw
,
plug and bayonet joints
.
Applications:
-Anti-Seizing non-destructive disassembly of threaded conncetions subject to high temperatures,
i.e. at internal combustion engines and turbines oven after long service time.
-Corrosion protection for nuts and
bolts,sockcts and spindles in refurenes, steel-and cement mills,
marine and agriculture
.
Benefits:
-Best use-
ONE single paste for MANY application
s
;
-
White-coloured
,
non-staining
,
outstanding lubricity
-
High pressure
,
low friction
and
low wear resistance
, reliable
anti-seize
effect and
corrosion protection
.
-Economical and ecological solution for many plants and shops which have been depending
on a number of special pastes so far.
-contains organic active molybdenum additive for increased performance.
Environment:
Ecology - FUKKOL H.T PASTE is non-toxic,contains no ferrous metals and is free from graphite ,
molybdenum-disulphide and sulphide additives.
Typical physical properties
2.No carbonization,no melting,no flow out
3.1400 degree
4.White-coloured,non-staining,lubricity
FUKKOL H.T. PASTE
http://www.fukkol-lube.com/asp-bin/EN/?page=1
Pretty small consumption ,10gram for one set normally.
it can last around 8000 processing times
no carbonization, no melting and no flow out,great choose for food processing machine.
temperature(max)
1400 degree
operation condition
Low speed
,
oscillating motion
material (available)
steel
,
non-ferrous
metal screw
,
plug,
bayonet joints
.
product life cycle
8000 processing times/white film is destroy
Apply to
nuts and
bolts,sockcts and spindles in refurenes,
steel-and cement mills,
marine and agriculture
function characteristic
anti-seize, anti-wear,ant-corrosion,high temperature
chemical features
White-coloured
,
non-staining,dry film lubricant
additives
anti-oxidation,anti-corrosion,lubricants,etc
Environment
non-toxic,no ferrous metals,graphite,molybdenum-disulphide and sulphide
Certificate
FDA,SGS,ROSH
Typical physical properties
Appearance
White color
Basc
Synthetic oil compound with organic thickener
and combination of white solid lubricants
Unworked penetration
280-320
Specific gravity
1.2g/cc at 20°C
Dropping point
None
Base oil viscosity
21mm2/s at 40°C
Temperature range
-40°C~+1400°C
Friction value
0.10-0.13
Degree of corrosion
1-90
Depth of wear
0.3um
Salt spray test
>500 hours
Four-ball tester(VKA)
3800/4000N
Description:
A white non-carbonized-under-high-temperature lubricating paste for lubrication of all kinds of surfaces subject to high load,
particularly operation at low speed and/or
oscillating motion
and of
steel
and
non-ferrous
metal
screw
,
plug and bayonet joints
.
Applications:
-Anti-Seizing non-destructive disassembly of threaded conncetions subject to high temperatures,
i.e. at internal combustion engines and turbines oven after long service time.
-Corrosion protection for nuts and
bolts,sockcts and spindles in refurenes, steel-and cement mills,
marine and agriculture
.
Benefits:
-Best use-
ONE single paste for MANY application
s
;
-
White-coloured
,
non-staining
,
outstanding lubricity
-
High pressure
,
low friction
and
low wear resistance
, reliable
anti-seize
effect and
corrosion protection
.
-Economical and ecological solution for many plants and shops which have been depending
on a number of special pastes so far.
-contains organic active molybdenum additive for increased performance.
Environment:
Ecology - FUKKOL H.T PASTE is non-toxic,contains no ferrous metals and is free from graphite ,
molybdenum-disulphide and sulphide additives.
Typical physical properties
anti-seize Lubricant Grease FUKKOL H.T. Paste
1.used on ejectot pin
2.No carbonization,no melting,no flow out
3.1400 degree
4.White-coloured,non-staining,lubricity
FUKKOL H.T. PASTE
http://www.fukkol-lube.com/asp-bin/EN/?page=1
Pretty small consumption ,10gram for one set normally.
it can last around 8000 processing times
no carbonization, no melting and no flow out,great choose for food processing machine.
temperature(max)
1400 degree
operation condition
Low speed
,
oscillating motion
material (available)
steel
,
non-ferrous
metal screw
,
plug,
bayonet joints
.
product life cycle
8000 processing times/white film is destroy
Apply to
nuts and
bolts,sockcts and spindles in refurenes,
steel-and cement mills,
marine and agriculture
function characteristic
anti-seize, anti-wear,ant-corrosion,high temperature
chemical features
White-coloured
,
non-staining,dry film lubricant
additives
anti-oxidation,anti-corrosion,lubricants,etc
Environment
non-toxic,no ferrous metals,graphite,molybdenum-disulphide and sulphide
Certificate
FDA,SGS,ROSH
Typical physical properties
Appearance
White color
Basc
Synthetic oil compound with organic thickener
and combination of white solid lubricants
Unworked penetration
280-320
Specific gravity
1.2g/cc at 20°C
Dropping point
None
Base oil viscosity
21mm2/s at 40°C
Temperature range
-40°C~+1400°C
Friction value
0.10-0.13
Degree of corrosion
1-90
Depth of wear
0.3um
Salt spray test
>500 hours
Four-ball tester(VKA)
3800/4000N
Description:
A white non-carbonized-under-high-temperature lubricating paste for lubrication of all kinds of surfaces subject to high load,
particularly operation at low speed and/or
oscillating motion
and of
steel
and
non-ferrous
metal
screw
,
plug and bayonet joints
.
Applications:
-Anti-Seizing non-destructive disassembly of threaded conncetions subject to high temperatures,
i.e. at internal combustion engines and turbines oven after long service time.
-Corrosion protection for nuts and
bolts,sockcts and spindles in refurenes, steel-and cement mills,
marine and agriculture
.
Benefits:
-Best use-
ONE single paste for MANY application
s
;
-
White-coloured
,
non-staining
,
outstanding lubricity
-
High pressure
,
low friction
and
low wear resistance
, reliable
anti-seize
effect and
corrosion protection
.
-Economical and ecological solution for many plants and shops which have been depending
on a number of special pastes so far.
-contains organic active molybdenum additive for increased performance.
Environment:
Ecology - FUKKOL H.T PASTE is non-toxic,contains no ferrous metals and is free from graphite ,
molybdenum-disulphide and sulphide additives.
Typical physical properties
2.No carbonization,no melting,no flow out
3.1400 degree
4.White-coloured,non-staining,lubricity
FUKKOL H.T. PASTE
http://www.fukkol-lube.com/asp-bin/EN/?page=1
Pretty small consumption ,10gram for one set normally.
it can last around 8000 processing times
no carbonization, no melting and no flow out,great choose for food processing machine.
temperature(max)
1400 degree
operation condition
Low speed
,
oscillating motion
material (available)
steel
,
non-ferrous
metal screw
,
plug,
bayonet joints
.
product life cycle
8000 processing times/white film is destroy
Apply to
nuts and
bolts,sockcts and spindles in refurenes,
steel-and cement mills,
marine and agriculture
function characteristic
anti-seize, anti-wear,ant-corrosion,high temperature
chemical features
White-coloured
,
non-staining,dry film lubricant
additives
anti-oxidation,anti-corrosion,lubricants,etc
Environment
non-toxic,no ferrous metals,graphite,molybdenum-disulphide and sulphide
Certificate
FDA,SGS,ROSH
Typical physical properties
Appearance
White color
Basc
Synthetic oil compound with organic thickener
and combination of white solid lubricants
Unworked penetration
280-320
Specific gravity
1.2g/cc at 20°C
Dropping point
None
Base oil viscosity
21mm2/s at 40°C
Temperature range
-40°C~+1400°C
Friction value
0.10-0.13
Degree of corrosion
1-90
Depth of wear
0.3um
Salt spray test
>500 hours
Four-ball tester(VKA)
3800/4000N
Description:
A white non-carbonized-under-high-temperature lubricating paste for lubrication of all kinds of surfaces subject to high load,
particularly operation at low speed and/or
oscillating motion
and of
steel
and
non-ferrous
metal
screw
,
plug and bayonet joints
.
Applications:
-Anti-Seizing non-destructive disassembly of threaded conncetions subject to high temperatures,
i.e. at internal combustion engines and turbines oven after long service time.
-Corrosion protection for nuts and
bolts,sockcts and spindles in refurenes, steel-and cement mills,
marine and agriculture
.
Benefits:
-Best use-
ONE single paste for MANY application
s
;
-
White-coloured
,
non-staining
,
outstanding lubricity
-
High pressure
,
low friction
and
low wear resistance
, reliable
anti-seize
effect and
corrosion protection
.
-Economical and ecological solution for many plants and shops which have been depending
on a number of special pastes so far.
-contains organic active molybdenum additive for increased performance.
Environment:
Ecology - FUKKOL H.T PASTE is non-toxic,contains no ferrous metals and is free from graphite ,
molybdenum-disulphide and sulphide additives.
Typical physical properties
antifreeze for loader
antifreeze for loader
antifreeze,anti-corrosion. anti-boiling, non-toxic.non-dorless. and non-pollution.
antifreeze for loader
product features:
1. Many strong points can be listed for this long-term antifreeze: such as antifreeze,anti-corrosion. anti-boiling, non-toxic.non-dorless. and non-pollution.
2. Strong chemical stability costs only a small amount of evaporation.It makes no damage to the rubber hose of the car and the polished car surface.
3.In the summer,higher boiling point helps to improve the engine's heat load and prolong the engine life under high temperature . In the winter ,it is useful for the engine cooling ,thus preventing the machinery and equipment parts from frost crack .
antifreeze,anti-corrosion. anti-boiling, non-toxic.non-dorless. and non-pollution.
antifreeze for loader
product features:
1. Many strong points can be listed for this long-term antifreeze: such as antifreeze,anti-corrosion. anti-boiling, non-toxic.non-dorless. and non-pollution.
2. Strong chemical stability costs only a small amount of evaporation.It makes no damage to the rubber hose of the car and the polished car surface.
3.In the summer,higher boiling point helps to improve the engine's heat load and prolong the engine life under high temperature . In the winter ,it is useful for the engine cooling ,thus preventing the machinery and equipment parts from frost crack .
antirust agent FUKKOL RUSTKING L TYPE
antirust FUKKOL RUSTKING L TYPE
Hard wax coat will not melt at 50 Celsius
Long term protection for more than 3 years
FUKKOL RUSTKING L TYPE RUST-PROOF AGENT
http://www.fukkol-lube.com/asp-bin/EN/?page=1
DESCRIPTION:
Fukkol Rustking L type rust-proof agent makes a
brown protective film
shows where the product has been applied.
Rustking L type provides
long term lubrication and protection against rus
t
. The rust-proof film will not melt at 50°C~60°C. The rust-proof duration will be more than five years indoor and three years in ourdoor.
The product can be
removed by a mild solvent
or
simply by putting a mould back in service
and running a few parts.
BENEFITS
Contains a
brown dye
to identify treated surfaces
-Simply removed by putting mould back in service
-Provides complete protection against finger-print
-Provides corrosion protection for more than 5 years (indoor)
--Provides corrosion protection for more than 3 years (ourdoor)
APPLICATION
Its brown colored
ultra-thin soft film
which provides long term corrosion protection to metals.
Absolutely
displaces water and resists moisture
.
Specially designed for protection of
moulds, castings and dies
in production or in storage.
A reliable rust-proof agent for metal tools and parts, power plants and ocean-going freighters.
Typical physical properties
boiling point
>100°C
specific gravity
0.6032
vapour density
Is heavier than air
evaporation velocity
>1 (Butyl Acetate=1)
stability
Stable
Hard wax coat will not melt at 50 Celsius
Long term protection for more than 3 years
FUKKOL RUSTKING L TYPE RUST-PROOF AGENT
http://www.fukkol-lube.com/asp-bin/EN/?page=1
DESCRIPTION:
Fukkol Rustking L type rust-proof agent makes a
brown protective film
shows where the product has been applied.
Rustking L type provides
long term lubrication and protection against rus
t
. The rust-proof film will not melt at 50°C~60°C. The rust-proof duration will be more than five years indoor and three years in ourdoor.
The product can be
removed by a mild solvent
or
simply by putting a mould back in service
and running a few parts.
BENEFITS
Contains a
brown dye
to identify treated surfaces
-Simply removed by putting mould back in service
-Provides complete protection against finger-print
-Provides corrosion protection for more than 5 years (indoor)
--Provides corrosion protection for more than 3 years (ourdoor)
APPLICATION
Its brown colored
ultra-thin soft film
which provides long term corrosion protection to metals.
Absolutely
displaces water and resists moisture
.
Specially designed for protection of
moulds, castings and dies
in production or in storage.
A reliable rust-proof agent for metal tools and parts, power plants and ocean-going freighters.
Typical physical properties
boiling point
>100°C
specific gravity
0.6032
vapour density
Is heavier than air
evaporation velocity
>1 (Butyl Acetate=1)
stability
Stable
antiwear hydraulic oil additive
RC9202 Antiwear Hydraulic Oil Additive
The product is used primarily for formulating the antiwear hydraulic oil.
RC9202 Additive Package for Antiwear Hydraulic Oil
1. DESCRIPTION
RC9202 is a zinciferous hydraulic oil additive package, possessing excellent antioxidation, antirust, corrosion protection and antiwear properties. The hydraulic oil prepared from RC9202 has fine filterability, even when the very small filter screen is used. In order to meet the strict defoam requirements for some industrial oils, should add some defoamer into the base oil.
2. PRODUCT FEATURES
The product is used primarily for formulating the antiwear hydraulic oil, which conforms to the standards as follow: DIN 51524 Part 2 and part 3 (HLP, HVLP); AFNOR NF E 48-603(HM, HV); SIS SS 155434; VDMA24318;Hoesch HWN 2333; Thyssen TH N-256132; CETOP RP91 H (HM, HV); SEB181222; U.S. Steel 126, 127 and 136; Sperry Vickers M-2950-S and I-286-S; Denison Filterability TP 02100. The industrial oil blended with this package conforms to DIN51517,part 3 (CLP); SEB 181 226.
3. SUGGESTED DOSAGE
Oil type
Dosage m%
Industrial gear oil
1.5-3.0
Superior grade hydraulic oil
0.6-0.8
4. CHARACTERISTICS
ITEM
TYPICAL VALUE
Kinematic Viscosity (40°C), mm2/s
100
Flash point (open cup),
150
S, M%
15
Ba, m%
0.4
Zn, m%
8.0
P, m%
7
5. STORAGE AND TRANSPORTATION
The requirements of SH/T0164 should be met during the storage, handling and blending. The maximum temperature should not exceed 75. The ambient temperature for long-term storage should not exceed 45. It is non-flammable, non-explosive, and non-corrosive. The precautions in safety, environment control, and application are the same as those of common petroleum products, having no need of special protection. 6. PACKINGThe product is packed in 200 litre metal drum, with the net weight at 200 kg per drum; or in bulk..
The product is used primarily for formulating the antiwear hydraulic oil.
RC9202 Additive Package for Antiwear Hydraulic Oil
1. DESCRIPTION
RC9202 is a zinciferous hydraulic oil additive package, possessing excellent antioxidation, antirust, corrosion protection and antiwear properties. The hydraulic oil prepared from RC9202 has fine filterability, even when the very small filter screen is used. In order to meet the strict defoam requirements for some industrial oils, should add some defoamer into the base oil.
2. PRODUCT FEATURES
The product is used primarily for formulating the antiwear hydraulic oil, which conforms to the standards as follow: DIN 51524 Part 2 and part 3 (HLP, HVLP); AFNOR NF E 48-603(HM, HV); SIS SS 155434; VDMA24318;Hoesch HWN 2333; Thyssen TH N-256132; CETOP RP91 H (HM, HV); SEB181222; U.S. Steel 126, 127 and 136; Sperry Vickers M-2950-S and I-286-S; Denison Filterability TP 02100. The industrial oil blended with this package conforms to DIN51517,part 3 (CLP); SEB 181 226.
3. SUGGESTED DOSAGE
Oil type
Dosage m%
Industrial gear oil
1.5-3.0
Superior grade hydraulic oil
0.6-0.8
4. CHARACTERISTICS
ITEM
TYPICAL VALUE
Kinematic Viscosity (40°C), mm2/s
100
Flash point (open cup),
150
S, M%
15
Ba, m%
0.4
Zn, m%
8.0
P, m%
7
5. STORAGE AND TRANSPORTATION
The requirements of SH/T0164 should be met during the storage, handling and blending. The maximum temperature should not exceed 75. The ambient temperature for long-term storage should not exceed 45. It is non-flammable, non-explosive, and non-corrosive. The precautions in safety, environment control, and application are the same as those of common petroleum products, having no need of special protection. 6. PACKINGThe product is packed in 200 litre metal drum, with the net weight at 200 kg per drum; or in bulk..
architecture anticorrosive grease ArChine Arcanticorrosive 120
1,architecture anticorrosive grease
2,designed for producting steel and wire rope.
3,Operation tempe -20~120
Distributor Wanted
Description
ArChine Arcanticorrosive 120 is an architecture anticorrosive grease. this product contains many additives, and the base oil is mineral oil.
ArChine Arcanticorrosive 120 has many advantages, for example: long life, lubricant, EP performance, water resistant, and compatibility with plastic. This product can be used for producting steel and wire rope, it can meet with lubricanting and anti-rust.
After hear, ArChine Arcanticorrosive 120 did not have bubble and emulsification.
When used at a loe temperature, it had good paintability.
Application
ArChine Arcanticorrosive 120 designed for producting steel and wire rope. Operation temperature: -20°C~120°C
Technical Data
ArChine Arcanticorrosive 120
Unit
Test method
Worked penetration,0.1mm
265-295
GB/T 269
Drop point,°C ≥
160
GB/T 4929
Water content,
Mark
GB/T 512
Oil separation(100°C,24h), ≤
8.0
SH/T 0324
Corrosiveness to steel(45# steel,100°C,24h)
Qualified
SH/T 0331
Evaporation(99°C,22h),% ≤
2.0
GB/T 7325
Cryogenic property, (-40°C,30min)
Qualified
SH/T 0387
Humidity cabinet test (45#steel, 30d) grade, ≤
2
GB/T 2361
Salt spray test (45#steel, 30d) grade, ≤
2
SH/T 0081
Oxidation stability (99°C,100h,0.785MPa)
A: Pressure Drop,Mpa ≤
B: Acid number, mgKOH/g, ≤
0.070
1.0
SH/T 0325
GB/T 264
Double-pipe compatibility (65°C,40d)
A: oil absorption,, ≤
B: rate of changge of tensile strength, ≤
10
30
HG 2-146
GB 1040
2,designed for producting steel and wire rope.
3,Operation tempe -20~120
Distributor Wanted
Description
ArChine Arcanticorrosive 120 is an architecture anticorrosive grease. this product contains many additives, and the base oil is mineral oil.
ArChine Arcanticorrosive 120 has many advantages, for example: long life, lubricant, EP performance, water resistant, and compatibility with plastic. This product can be used for producting steel and wire rope, it can meet with lubricanting and anti-rust.
After hear, ArChine Arcanticorrosive 120 did not have bubble and emulsification.
When used at a loe temperature, it had good paintability.
Application
ArChine Arcanticorrosive 120 designed for producting steel and wire rope. Operation temperature: -20°C~120°C
Technical Data
ArChine Arcanticorrosive 120
Unit
Test method
Worked penetration,0.1mm
265-295
GB/T 269
Drop point,°C ≥
160
GB/T 4929
Water content,
Mark
GB/T 512
Oil separation(100°C,24h), ≤
8.0
SH/T 0324
Corrosiveness to steel(45# steel,100°C,24h)
Qualified
SH/T 0331
Evaporation(99°C,22h),% ≤
2.0
GB/T 7325
Cryogenic property, (-40°C,30min)
Qualified
SH/T 0387
Humidity cabinet test (45#steel, 30d) grade, ≤
2
GB/T 2361
Salt spray test (45#steel, 30d) grade, ≤
2
SH/T 0081
Oxidation stability (99°C,100h,0.785MPa)
A: Pressure Drop,Mpa ≤
B: Acid number, mgKOH/g, ≤
0.070
1.0
SH/T 0325
GB/T 264
Double-pipe compatibility (65°C,40d)
A: oil absorption,, ≤
B: rate of changge of tensile strength, ≤
10
30
HG 2-146
GB 1040
Subscribe to:
Posts (Atom)