Saturday, March 19, 2011

T803A Poly-a-olefin/ Pour point depressant/ lubricant additive/ additive/ Poly-a-olefin

T803A Poly-a-olefin
Pour point depressant
lubricant additive
additive
Poly-a-olefin / supply qty:300 ton

POLY-α-OLEFIN

T803A

BRIEF INTRODUCTION
The product is primarily used in blending lubricaing oils such as internal combustion engine oil, turbine oil, gear oil and axle oil. It is orange yellow transparent thick liquid. The recommended dosage is 0.2-1.0%.

CHARACTERISTICS
Good pour point depression ability
Improve the fluidity of oil products at low temperature
Remarkably improve shear stability

PRODUCT FEATURES AND TEST METHODS
ITEM
INDICE
TEST METHOD
Flash point (open cup), °C
≥136
SH/T3536
Water, m%
≤0.03
GB/T260
Impurities, m%
≤0.06
SH/T511
Kinematic Viscosity (100°C), mm
2
/s
≤4000
GB/T265
Ash, m%
≤0.10
GB/T508
Pour Point Depression, °C
18
GB/T510

PACKING AND STORAGE
Packing: The product is packed in 200 liter metal drum.
Storage: Please refer to SH/T0164, for transportation, storage and oil blending. Keep the temperature not higher than 60°C. For long-term storage the suggested temperature is lower than 50°C. Strictly prevent water and impurities from entering. The dry, clean and ventilating warehouse is recommended.

T803A Poly-a-olefin/ Pour point depressant/engine oil additive/ gear oil additive/ oil additive

T803A Poly-a-olefin
Pour point depressant
engine oil additive
gear oil additive/ oil additive
supply qty: 700 ton

POLY-α-OLEFIN


T803A

BRIEF INTRODUCTION
The product is primarily used in blending lubricaing oils such as internal combustion engine oil, turbine oil, gear oil and axle oil. It is orange yellow transparent thick liquid. The recommended dosage is 0.2-1.0%.

CHARACTERISTICS
Good pour point depression ability
Improve the fluidity of oil products at low temperature
Remarkably improve shear stability

PRODUCT FEATURES AND TEST METHODS
ITEM
INDICE
TEST METHOD
Flash point (open cup), °C
≥136
SH/T3536
Water, m%
≤0.03
GB/T260
Impurities, m%
≤0.06
SH/T511
Kinematic Viscosity (100°C), mm
2
/s
≤4000
GB/T265
Ash, m%
≤0.10
GB/T508
Pour Point Depression, °C
18
GB/T510

PACKING AND STORAGE
Packing: The product is packed in 200 liter metal drum.
Storage: Please refer to SH/T0164, for transportation, storage and oil blending. Keep the temperature not higher than 60°C. For long-term storage the suggested temperature is lower than 50°C. Strictly prevent water and impurities from entering. The dry, clean and ventilating warehouse is recommended.

T803A/PAO/LUBRICATING OIL ADDITIVE/LUBRICANT ADDITIVE/PPD/PETROCHEM ADDITIVE

Pour point depressant /engine oil additive/PPD/PAO
industrial oil additive/lubricating oil additive
POLY-α-OLEFIN

APPLICATION
POLY-α-OLEFIN/T803A
Pour point depressant /engine oil additive/PPD
Lubricant additive/lubricating oil additive/industrial oil additive

The additive is mainly used in blending engine oil, turbine oil, gear oil and axle oil. It has excellent pour depressing effect, it can improve oil’s low temperature property obviously, so it is an idealism pour depressant for light lube, It is orange yellow transparent viscous liquid.
Poly-α-olefin is divided into 4 grades according to different oil and requirements.
A—used for de-waxed oil
B—lower viscosity and excellent anti shear property
C—better liquidity
D—lower viscosity and excellent anti shear property

FEATURES
Good pour depression property
Light color
Obviously improve the low temp performance of lube

RECOMMENDED DOSAGE
0.2-1.0%.

PACKING AND STORAGE
Packing: 160kg/drum,200L drum.

T803A/PAO/LUBRICATING OIL ADDITIVE/PPD/INDUSTRIAL OIL ADDITIVE/POUR POINT DEPRESSANT/ENGINE OIL ADDITIVE

Pour point depressant /engine oil additive/PPD/PAO
industrial oil additive/lubricating oil additive
POLY-α-OLEFIN

APPLICATION
POLY-α-OLEFIN/T803A
Pour point depressant /engine oil additive/PPD
Lubricant additive/lubricating oil additive/industrial oil additive

The additive is mainly used in blending engine oil, turbine oil, gear oil and axle oil. It has excellent pour depressing effect, it can improve oil’s low temperature property obviously, so it is an idealism pour depressant for light lube, It is orange yellow transparent viscous liquid.
Poly-α-olefin is divided into 4 grades according to different oil and requirements.
A—used for de-waxed oil
B—lower viscosity and excellent anti shear property
C—better liquidity
D—lower viscosity and excellent anti shear property

FEATURES
Good pour depression property
Light color
Obviously improve the low temp performance of lube

RECOMMENDED DOSAGE
0.2-1.0%.

PACKING AND STORAGE
Packing: 160kg/drum,200L drum.

T803b Poly-a-olefin Pour Point Depressant

T803b Poly-a-olefin Pour Point Depressant
The products are used primarily for various industrial oils and engine oils.
T803b Poly-a-olefin Pour Point Depressant
1. DESCRIPTION
The product is an orange yellow transparent thick liquid, prepared from wax cracking alpha-olefin. It shows good pour point depression ability for light lube oil. It could also depress the pour point of heavy lube oils, and improve the fluidity of oil product at low temperature.T803A has the same depression effect as T803B. T803A is used primarily for deeply dewaxed oils, and T803A has lower viscosity, so it can improve shear stability markedly.
2. APPLICATIONS
The products are used primarily for various industrial oils and engine oils.
The dosage is from 0.2% to 1.0%.
3. CHARACTERISTICS
Term
Quality Index
Test Method
Appearance
Orange; Transparent;
Viscous Body
Visual Inspection
Flash Point(Opening) (°C)
≥120
GB/T267
Moisture (%)
≤0.03
GB/T260
Effective Constituent
( %)
≥30
SH/T0034
Kinematic Viscosity
100°C ( mm
2
/s)
≤3000
GB/T265
degree of decreasing pour point (°C)
≥16
GB/T510
Ash Content (%)
≤0.20
GB/T268
4. PACKING AND STORAGE
The packing, marking, transportation, storage and delivery acceptance should meet the requirements of SH/T0164. It is packed in 200 litre metal drum. Store in dry, clean and ventilating warehouses.

T901 Methyl silicon oil/ Antifoam/ lubricant additive/ additive/ Methyl silicon oil

T901 Methyl silicon oil/ Antifoam
lubricant additive
additive
Methyl silicon oil
supply qty: 900 ton

METHYL SILICON OIL

T901

BRIEF INTRODUCTION
The product is primarily used in internal combustion engine oil, gear oil, hydraulic oil and hakko kogyo as defoamer. It also can be applied for demoulding, waterproof, anti-mold and insulation in the rubber, plastics and casting industry. It is colorless transparent thick liquid. The dosage is 5.0-20.0 mg/kg.

CHARACTERISTICS
Have high antifoaming effect
Good chemical stability
Small dosage
have serious impact on gas release

PRODUCT FEATURES AND TEST METHODS
ITEM
INDICE
TEST METHOD
Density (25°C), kg/m
3
965
GB/T1884
Flash Point (open cup), °C
≥303
GB/T267
Viscosity (25°C), mm
2
/s
102%
GB/T265
Solidifying Point, °C
≤-52
GB/T510
Refractive Index (25°C)
1.405
-
Viscosity-temperature Coefficient
0.60
-
TAN, mg KOH/g
≤0.02
GB/T264
Loss of Weight in Vacuum-heat, %
0.4
-
Dielectric Constant
≥2.7
GB/T5654

PACKING AND STORAGE
Packing: The product is packed in 15 liter metal drum (net weight: 15 kg/drum).
Storage: Please refer to SH/T0164, for transportation, storage and oil blending. Keep the temperature not higher than 60°C. For long-term storage the suggested temperature is lower than 50°C. The dry, clean and ventilating warehouse is recommended.

T903 High-grade methyl silicone oil/ Antifoam/ lubricant additive/ additive/ High-grade methyl silicone oil

T903 High-grade methyl silicone oil
Antifoam/ lubricant additive
additive
High-grade methyl silicone oil
supply qty: 900 ton

HIGH-GRADE METHYL SILICONE OIL

T903

BRIEF INTRODUCTION
The product is suitable for all lubricating oils which require anti-foam indicator. It is milk white to light yellow liquid. The dosage is 3.0-5.0 mg/kg.

CHARACTERISTICS
Excellent performance of oil anti-foam, oil soluble and stability
Overcome the shortcomings of silicon-oil anti-foam agent, such as bad stability, low solubility, high blending technology requirements, high air-release value and the possibility of losing anti-foam ability when the existance of some aditives.
Prolong the service life of lubricating oils
Easy to use
Low cost
Reliable quality

PRODUCT FEATURES AND TEST METHODS
ITEM
INDICE
TEST METHOD
Density (20°C), kg/m
3
895-950
GB/T1884
Flash Point (open cup), °C
≥61
GB/T267
Solidifying Point, °C
≤-14
GB/T510
Impurities, m%
≤0.04
GB/T511

PACKING AND STORAGE
Packing: The product is packed in 25 liter metal drum.
Storage: Please refer to SH/T0164, for transportation, storage and oil blending. Keep the temperature not higher than 60°C. For long-term storage the suggested temperature is lower than 50°C. The dry, clean and ventilating warehouse is recommended.

ArChine Polyure 180

1,is a high performance EP Polyure grease
2,Operation temperature: -20~180
3,suits for lubrication of roller and friction bear
Distributor Wanted
Description
ArChine Polyure 180 is is a high performance EP Polyure grease, it contains solid lubricants and chemically active EP additives.
ArChine Polyure 180 has many advantages,for example
pumpable in centrallubricating systems, very high thermal resistance, extremely resistant to oxidation, water resistant, high stability, corrosion resistant, high pressure load capacity,good adhesiveness, and so on.
Application
ArChine Polyure 180 suits for lubrication of roller and friction bearings under extreme pressure load at very high temperatures.
ArChine Polyure 180 suits in most cases for life time lubrication and for the lubrication of oscillating bearings.
Operation temperature: -20°C~180°C
Technical Data
ArChine Polyure 180
Unit
Test method
Worked penetration,0.1mm
265-295
GB/T 269
Drop point,°C ≥
250
GB/T 3498
Corrosiveness to Copper(T2 Copper,100°C,24h)
No change
GB/T 7326
Second method
Water washout characteristics(38°C,1h),%(m/m) ≤
10
SH/T 0109
Fluid loss(104°C,6h),g ≤
2.5
SH/T 0326
Oxidation stability ,Pressure Drop,MPa
(99°C,100h,0.770MPa)≤
0.070
SH/T 0325
Oil separation(100°C,24h), (m/m) ≤
5
SH/T 0324
Corrosion stability,(52°C,48h),grade ≤
2
GB/T 5018
Evaporation(180°C,1h), (m/m) ≤
5
SH/T 0337

T903/HIGH-GRADE METHYL SILICONE OIL/LUBRICATING OIL ADDTIVE/PETROCHEM ADDITIVE/DEFOAMER/PLASTIC ADDITIVE/RUBBER ADDITIVE

defoamer/antifoam additive/engine oil additive/gear oil additive/hydraulic oil additive/rubber additive/plastic additive
HIGH-GRADE METHYL SILICONE OIL

APPLICATION
HIGH-GRADE METHYL SILICONE OIL/T903
defoamer/Antifoam additive/engine oil additive/gear oil additive/hydraulic oil additive/rubber additive/plastic additive
lubricant additive/lubricating oil additive

This additive is a high effective, new generation defoamer. It overcome some defect of silicon-oil anti-foam agent, such as bad stability, low solubility. It is suitable for all lubricating oils to work as defoamer. It is milk white to light yellow liquid.

FEATURES
Excellent oil anti-foam property
Good oil solubility and chemical stability
Overcome defect of methyl silicon-oil, such as bad stability, low solubility,
strict blending conditions, high air-release value and the incompatibility with some additives
Low dosage

RECOMMENDED DOSAGE
3~5ppm

PACKING AND STORAGE
Packing: 20kgs/drum,25L drum.

T922 Non-silicon type antifoam/ Antifoam/ lubricant additive/ additive/ Non-silicon type antifoam

T922 Non-silicon type antifoam
Antifoam
lubricant additive
additive/ Non-silicon type antifoam
supply qty: 900 ton
Antifoam
lubricant additive
additive/ Non-silicon type antifoam

NON-SILICON TYPE ANTIFOAM

T922

BRIEF INTRODUCTION
The product is primarily used for the oil products that have high requirement for defoaming properties and no requirement for air release, especially all diesel engine oils. It is transparent liquid. The dosage is 0.01-0.1%.

CHARACTERISTICS
Favorable oil solubility
Excellent defoaming ability especially to the oil products that contain synthetic sulfonate or other high foaming substances
Easy to use
No need of dilution

PRODUCT FEATURES AND TEST METHODS
ITEM
INDICE
TEST METHOD
Density (20°C), kg/m
3
750
GB/T1884
Flash Point (open cup), °C
≥31
GB/T267
Impurities, m%
≤0.01
GB/T511
Defoaming Property (in 500SN), ml/ml, 24°C
24/0
GB/T12579

PACKING AND STORAGE
Packing: The product is packed in 20 liter metal drum.
Storage: Please refer to SH/T0164, for transportation, storage and oil blending. Keep the temperature not higher than 60°C. For long-term storage the suggested temperature is lower than 50°C. The dry, clean and ventilating warehouse is recommended.

T922 Non-silicon type antifoam/ Antifoam/engine oil additive/ gear oil additive/ oil additive

T922 Non-silicon type antifoam
Antifoam/engine oil additive
gear oil additive
oil additive
supply qty:100 ton
Antifoam/engine oil additive
gear oil additive
oil additive
NON-SILICON TYPE ANTIFOAM

T922

BRIEF INTRODUCTION
The product is primarily used for the oil products that have high requirement for defoaming properties and no requirement for air release, especially all diesel engine oils. It is transparent liquid. The dosage is 0.01-0.1%.

CHARACTERISTICS
Favorable oil solubility
Excellent defoaming ability especially to the oil products that contain synthetic sulfonate or other high foaming substances
Easy to use
No need of dilution

PRODUCT FEATURES AND TEST METHODS
ITEM
INDICE
TEST METHOD
Density (20°C), kg/m
3
750
GB/T1884
Flash Point (open cup), °C
≥31
GB/T267
Impurities, m%
≤0.01
GB/T511
Defoaming Property (in 500SN), ml/ml, 24°C
24/0
GB/T12579

PACKING AND STORAGE
Packing: The product is packed in 20 liter metal drum.
Storage: Please refer to SH/T0164, for transportation, storage and oil blending. Keep the temperature not higher than 60°C. For long-term storage the suggested temperature is lower than 50°C. The dry, clean and ventilating warehouse is recommended.

TBN 300 Detergent Additive

HIGHBASED SYNTHETIC CALCIUM SULFONATE T106/TBN300
The product is used primarily with high quality engine oils and marine oil.
HIGHBASED SYNTHETIC CALCIUM SULFONATE

T106


1. DESCRIPTION
The product is a brownish-red liquid, prepared from high boiling fraction synthetic phenyl sulfonic acid. It provides the lubricant with good high-temperature detergency, acid neutralizing ability, and antirust performance.
2. APPLICATIONS
The product is used primarily with high quality engine oils and marine oil, especially for engines,which use fuel with high sulfur content. Better compatibility could be obtained by adding in ashless dispersant, anti-oxidant and corrosion inhibitor.
3 SUGGESTED DOSAGE
The suggested dosage in the oil is from 1.5% to 3.0%.
The suggested dosage in bunker oil is from 3.0% to 25.0%
4
. CHARACTERISTICS
ITEM
TYPICAL VALUE
TEST Method
Density (15.6°C), kg/m3
Actual Measurement
GB/T2540
Oil Soluble Spot Test
Clean
LZA-BI-IA
Turbidity,JTU
≤250
SH/T0028
Kinematics Viscosity (100°C), mm2/s
200 max
GB/T265
TBN, mg KOH/g
≥295
SH/T0251
Calcium, m%
≥11.6
SH/T0270
Sulfur, m%
1.20-1.55
SH/T388
Chromaticity (dilute)
≤7.0
GB/T6540

5. PACKING AND STORAGE
The requirements of SH/T0164 should be met during the storage, handling and blending. The maximum temperature should not exceed 75. The ambient temperature for long-term storage should not exceed 45. It is non-flammable, non-explosive, and non-corrosive. The precautions in safety, environment control, and application are the same as those of common petroleum products, having no need of special protection. Don’t be mixed with strong oxidizer when it is used.

TBN 400 for lubricant grease / lubricant grease additive

1 Grease additive
2 excellent detergency in high and low temperature, shearing stability, excellent deposit
Grease additive
Model: Overbased Synthetic Calcium Sulfonate T106D / lubricant additive

1. Description
This petrochemical additive is mainly used to produce calcium sulfonate grease. It has performance of excellent detergency in high and low temperature, shearing stability, excellent deposit, anti-oxidation, grease stability, waterproof, anti-rust and anti-corrosion. A large dosage of the product is needed in the reaction with other converting agent to form calcium sulfonate grease. The product is mainly used in amtallurgy, military industry, car and construction.
2. Reference dosage
The reference dosage is from 30 % to 50%.

3. Specifications
Items
Limits
Test method
Density(20°C),kg/m
3
≥1100
GB/T1884
Oil compatibility
Detergent
LZA-BI-IA
Transparancy
Transparant
Observed
K.V.(100°C),mm
2
/s
≥200
GB/T265
TBN,mgKOH/g
≥395
SH/T0251
Calcium,m%
≥15.0
SH/T0297
Impurity,m%
≤0.10
GB/T511
Sulfur,m%
≥1.20
SH/T388

4.Packing

The product should be packed in 200L drum and stored in dry, clean, and vantilated warehouse. The saftey precaution refer to the MSDS

*** Added service ***
We can offer the technology solutions to make your oil better.
We can offer the "set meal" products, single agent and compound agent.
We had export Iran, Austria, Russia, Vietnam, UAE, North Korea, UAE, Singapore more than two years.

TBN400 High Base Petroleum Magnesium Sulfonate/ANTIRUST ADDITIVE/PETROLEUM ADDITIVE/DETERGENT/DISPERSANT/RUST INHIBITOR

detergent/dispersant/antirust rust inhibitor
marine engine motor oil/antirust oil additive/rust preventive
TBN400 High Base Petroleum Magnesium Sulfonate

APPLICATION
High Base Petroleum Magnesium Sulfonate
Petroleum Magnesium Sulfonate/Magnesium Sulfonate
detergent/dispersant/antirust/rust inhibitor/rust preventive
lubricating oil additive/lubricant additive
marine engine oil additive/engine motor oil/antirust oil additive

This additive is brownish red liquid, mainly used for blending high quality engine lubricant oil, especially low-ash engine oil, to provide lubricant with excellent neutralization, fine detergency &dispersion, anti rust performance as well as expending oil drain interval.

FEATURES
Excellent acid neutralizing capability
Excellent detergency
Good antirust performance
low ash content
Increase solubility of the lubricant
High-temperature stability

RECOMMENDED DOSAGE
0.5-3.0% in lubricant oil.

PACKING AND STORAGE
Packing:
200kgs/drum, 200 L steel drum.

THERMAL COMPOUND/ THERMAL GREASE

THERMAL COMPOUND/ THERMAL GREASE
a metal oxide filled dielectric thermal transfer agent.
THERMAL COMPOUND/ THERMAL GREASE
Description
Fukkol heat sink compound is a metal oxide filled dielectric thermal transfer agent. It is commonly used in electrical and electronic industries as a thermal transfer medium for facilitating heat dissipation between power components in electrical/electronic assemblies. And heat sink in the assembly process by filling the voids and gaps between the mated surfaces.

Characteristics

Temperature range

-40 °F(-40°C)to 400 °F(204°C)
Apperaance

White opaque

Bleed (204OC in 24 hrs)

1%MAX
NLGI Classification

1-2
Penetration (worked)

265-295
Evaporation(204OC in 24 hrs)

1%MAX
Water Resistance

Excellent
Thermal Conductivity

0.3
Specific Gravity

2.5

THIADIAZOLE DERIVATIVE/ADDITIVE/LUBRICANT ADDITIVE/LUBRICATING OIL ADDITIVE/PETROLEUM ADDTIVE

antioxidant/metal passivator/metal deactivator/deposit inhibitor/corrosion inhibitor
engine motor oil/gear oil/turbine oil add
HIADIAZOLE DERIVATIVE

APPLICATION
THIADIAZOLE DERIVATIVE
antioxidant/metal passivator/metal deactivator/deposit inhibitor/corrosion inhibitor
lubricant additive/lubricating oil additive
engine motor oil/gear oil/turbine oil/bearing oil/antiwear hydraulic oil additive

The product is widely used in Bearing anticorrosion agent, AW hydraulic pressure oil, industry gear oil, gasoline engine oil and AO agent etc. It is yellow transparent liquid. It has excellent AO and copper corrosion inhibiting properties, especially in AW hydraulic pressure, it can greatly decrease copper corrosion caused by ZDDP.

FEATURES
Excellent AO and copper corrosion inhibiting performance
Greatly reduce copper corrosion caused by ZDDP
Good hydrolytic stability
Improve AO property of paraffinic oil in engine oil

RECOMMENDED DOSAGE
0.03-0.4% in lubricant oil.

PACKING AND STORAGE
Packing: 40 or 170kgs/drum.

THIADIAZOLE DERIVATIVE/ADDITIVE/LUBRICANT ADDITIVE/LUBRICATING OIL ADDITIVE/PETROLEUM ADDTIVE

antioxidant/metal passivator/metal deactivator/deposit inhibitor/corrosion inhibitor
engine motor oil/gear oil/turbine oil add
HIADIAZOLE DERIVATIVE

APPLICATION
THIADIAZOLE DERIVATIVE
antioxidant/metal passivator/metal deactivator/deposit inhibitor/corrosion inhibitor
lubricant additive/lubricating oil additive
engine motor oil/gear oil/turbine oil/bearing oil/antiwear hydraulic oil additive

The product is widely used in Bearing anticorrosion agent, AW hydraulic pressure oil, industry gear oil, gasoline engine oil and AO agent etc. It is yellow transparent liquid. It has excellent AO and copper corrosion inhibiting properties, especially in AW hydraulic pressure, it can greatly decrease copper corrosion caused by ZDDP.

FEATURES
Excellent AO and copper corrosion inhibiting performance
Greatly reduce copper corrosion caused by ZDDP
Good hydrolytic stability
Improve AO property of paraffinic oil in engine oil

RECOMMENDED DOSAGE
0.03-0.4% in lubricant oil.

PACKING AND STORAGE
Packing: 40 or 170kgs/drum.

THIOPHOSPHORIC ACID AMINE SALT/H571

Extreme pressure additive/antiwear additive/gear oil additive/engine motor oil additive/ grease/petrochemical additive/petroleum
THIOPHOSPHORIC ACID AMINE SALT

APPLICATION
Extreme pressure additive/antiwear additive/gear oil additive/engine motor oil additive/ grease/petrochemical additive/petroleum additive

This additive is an orange oily liquid with smell, it provides lubricant with fine EP and AW properties and good chemical stability. It contains more phosphorus than Tricresyl Phosphate.
It is mainly used for blending gear oils for medium/heavy load vehicles and heavy load industry gear oils. It can also be used for blending engine oil and grease etc.

FEATURES

Good AW and EP properties
Good chemical stability

RECOMMENDED DOSAGE
0.4-2.0% in lubricating oil.

PACKING AND STORAGE
Packing: 200kgs/drum, 200 L steel drum

ArChine Silicone HVG 200

1,a high vacuum grease
2,Operation temperature: -40~200
3,Vacuum Silicone Grease
Distributor Wanted
Description
ArChine Silicone HVG 200 is a high vacuum grease. It contains many additives, for example: antirust, oxygen resist.
ArChine Silicone HVG 200 has many advantages, exceptional compatibility with rubber and plastics, wide temperature application range, outstanding lubrication properties, resistant to hot and cold water, high resistance to ageing, high lubricating effect, physiologically neutral, outstandingly adherent to materials ,and so on.
Application
ArChine Silicone HVG 200 is designed for Plastic taps, glands, ground glass joints on glass apparatus, plastic/metal pairings, lubrication of plastic components and domestic appliance, camera zoomer lens,and so on.
Operation temperature: -40°C~200°C
Technical Data
ArChine Silicone HVG 200
Unit
Test method
Worked penetration,0.1mm
2300-280
GB/T 269
Drop point,°C ≥
250
GB/T 4929
Evaporation(99°C,22h),% ≤
2
GB/T 7325
Oxidation stability Pressure Drop,MPa ≤
(99°C,100h,0.770MPa)
0.070
SH/T 0325

THK AFB-LF Industrial Lubricant grease

Brand :THK
Style:AFB-LF
Capability:70G/PCS,400G/PCS,16KG/PCS
Manufacure: THK Co.,Ltd, JAPAN
excellent grease
1 The high speed movement department
2 the low resistance
3 produce few heat
4.origin: THK CO.,LTD.
excellent grease
Brand :THK
Style:AFB-LF
Capability:70G/PCS , 400G/PCS, 18KG/barrel.
The AFB-LF is one of our THK sellers which is high speed movement department and low resistance with the few heat production.They are capable for all kinds of machine and other tools

THK AFC grease/lubricants oil/industrial

THK AFC grease/lubricants oil/industrial
1.excellent wear characteristics
2.Has splendid wear-resisting
3.70g/tube
4.Model n
THK AFC grease/lubricants oil/industrial
1.it inhibit the high-speed friction problem when used effectively.
2.excellent anti-fretting corrosion
3.decreasing running cost due to longer service life
4.Base Oil:High-quality Synthetic oil
5.Thickening Agent:Urea Compound
in our industry, mainly for YAMAHA machines, low speed bearing and slider
Usage: can be used together with Japanese THK MG70 GUN

THK AFF GREASE/THK GREASE AFF/lubricant

THK AFF grease has excellent wear characteristics, it inhibit the high-speed friction problem when used effectively.
THK AFF grease has excellent wear characteristics, it inhibit the high-speed friction problem when used effectively.


Package: 70g/pcs, 400g/pcs, 16kg/barrel.
Manufacture: THK Co.,Ltd
Usage: Can be used together with the Japanese THK MG70.

THK AFF Industrial Lubricants / grease

excellent grease
1 The high speed movement department
2 the low resistance
3 produce few heat
excellent grease
1 The high speed movement department
2 the low resistance
3 produce few heat
excellent grease
Brand :THK
Style:AFF
Capability:70G/PCS , 400G/PCS.
The AFF is one of our THK sellers which is high speed movement department and low resistance with the few heat production.They are capable for all kinds of machine and other tools



THK AFG excellent grease/lubricants/ industrial lubricating oil

excellent grease
1 The high speed movement department
2 the low resistance
3 produce few heat
excellent grease
1 The high speed movement department
2 the low resistance
3 produce few heat
excellent grease
Brand :THK
Style:AFG
Capability:70G/pcs. 400/pcs

THK AFJ grease/lubricants/ industrial lubricating oils

Package: 70g/pcs, 400g/pcs, 16kg/barrel.
Manufacture: THK Co.,Ltd
Usage: Can be used together with the Japanese THK MG70.
THK AFJ grease has excellent wear characteristics, it inhibit the high-speed friction problem when used effectively.
Package: 70g/pcs, 400g/pcs, 16kg/barrel.
Manufacture: THK Co.,Ltd
Usage: Can be used together with the Japanese THK MG70.

THK(AFC)

THK(AFC)
1.excellent wear characteristics
2.Has splendid wear-resisting
3.70g/tube
4.Model n
THK(AFC)
1.it inhibit the high-speed friction problem when used effectively.
2.excellent anti-fretting corrosion
3.decreasing running cost due to longer service life
4.Base Oil:High-quality Synthetic oil
5.Thickening Agent:Urea Compound
in our industry, mainly for YAMAHA machines, low speed bearing and slider
Usage: can be used together with Japanese THK MG70 GUN

TOUGHTENING FUKKOL H.T.M. Elasticizer

TOUGHTENING FUKKOL H.T.M. Elasticizer
Non-Tonic and safety formulated.
Add to surface reflet
TOUGHTENING FUKKOL H.T.M. Elasticizer

Description
H.T.M was based on special chemical additives.
The medium viscosity is desighed with new and recycle plastic material to improved.
The surface reflet and toughen, and also provides stability with material.
2.H.T.M can using with all most plastic that in compliance with ETV and ASTM norms.
Absolutely no side effect.

Application
1.Volume measurement.
2.Mixing with Dyestuff power before material(If have).
3.Injection at material temperature torrefy.

Benifits
Non-Tonic and safety formulated.
Non-impact plastic material, add to stability.
Add to surface reflet.
Add to toughen.
Decrease costing.
1.Can not producing with all transparence plastic.
2.Do not mixing more that suggest proportion.



Performance Standard
EURO EN 71 & U.S.A ASTM F966


Reference component:25KG
ABS
P.P
PE,PVC
P.C
HIPS,PBT
PMMA,K-RESIN
30-40ML
25-30ML
25-30ML
30ML
20-25ML
10


Charateristics
Products
Viscosity
Pour point
Flash point
V.T.C
Water
Alcohol
H.T.M
500
-50
Min 315
0.60
1
1

TWS600S pump

Model TWS600S pump is a reciprocating, horizontal single acting triplex pump with maximum rated input brake power of 600HP. This



Briefly Introduction

KH600S is a reciprocating, positive displacement, horizontal single-acting, triplex
plunger pump which is rated at 600 Brake Horsepower input maximum. The SJ600S
is designed for intermittent duty well service applications such as acidizing,
cementing, fracturing, well killing, gravel packing, etc.


Outer Demension
Length 50.25” (1276mm)
Width 52.93” (1344mm)
Height 23.88” (607mm)
Net weight (about) (2086kg)

1. Power end
Max. load (kg) (43,360kg)
Max. input power (KW) 447
Max. rotating speed of pinion shaft 1416r/min
Gear transmission ratio 4.61

2.Fluid end
Max. water power(KW) 447(600hp)
Stroke (mm) 152(6”)

KH600S pump consists of a Power End/Speed Reducer Assembly and a Fluid End Assembly


Performance data
Dia., plunger
Output RPM
Pump SPM / Displacement at corresponding RPM of pinion gear
50/230
120/552
200/920
300/1380
450/2070
Inch (mm)
G/R
(L/M)
G/M
(L/M)
PSI
(Kg/cm
2
)
G/M
(L/M)
PSI
(Kg/cm
2
)
G/M
(L/M)
PSI
(Kg/cm
2
)
G/M
(L/M)
PSI
(Kg/cm
2
)
G/M
(L/M)
PSI
(Kg/cm
2
)
2 1/2”
(63.5)
.38
(1.4)
19
(72)
20,372
(1436)
46
(174)
20,165
(1421)
76
(290)
12,099
(835)
115
(434)
8,066
(568)
172
(651)
5,377
(379)
2 3/4”
(69.9)
.46
(1.8)
23
(87)
16,836
(1186)
56
(210)
16,665
(1174)
93
(350)
9,999
(705)
139
(526)
6,666
(470)
208
(788)
4,444
(313)
3”
(76.2)
.55
(2.1)
28
(104)
14,147
(997)
66
(250)
14,003
(987)
110
(417)
8,402
(592)
165
(625)
5,601
(395)
248
(938)
3,734
(263)
(

Friday, March 18, 2011

TY lubricant oil purifier/oil recycling machine/oil filter plant

If you want to recovery used car oil, engine oil to new oil and resell it to market, this machine is what you need. contact me .

TY Series Turbine Oil Purifier
Technical Features:
The TY series integrate the gravity method, evaporation method, coacervation, vacuum separation and mechanical purification, utilizing coacervation, molecular absorption, vacuum drying and automatic demulsifying technologies which are capable of separating large and minimal amount of water from oil. Its high water removal and demulsifying efficiency makes turbid oil to be clear and limpid.
The precision multi-stage filter element can remove effectively various impurities, as it is a stage-to-stage densified filter element which could accommodate large amount of impurities and has a longer lifetime.
The advanced infrared level automatic control system, voice & light automatic alarm system and the pressure protection device ensure a safe and reliable operation.
Turbine oil and low viscosity lubricant oil can be treated online.
Use:
Widely applied to turbine, gas turbine and hydraulic turbine online oil treatment in the power, chemical, papermaking and metallurgic industries, ensuring adjustment to unit and smooth operation of lubricating system. It can also be used for treating low viscosity lubricant oil and cooling oil.



1606A--Vegetable wax

fully refined from palm oil
Good plasticity,easy stripping
non-pollution,degradable
directly pressed into pillar & tea candle

ArChine Synchain POE 150

1,Hi-Temp Food Grade Chain Oils
2,Extremely low volatility resulting in less oil consumption
3,ArChine Synchain POE 150
Distributor Wanted
PRODUCT DESCRIPTION
ArChine Synchain POE series products are synthetic POE high temperature lubricants designed primarily for
high temperature equipment, such as oven chains and tenter frame ovens, as well as paint and
ceramic curing ovens. Satisfactory performance can also be expected in applications involving bearing
lubrication. Formulated from a quality synthetic basestock and additive system,
ArChine Synchain POE series products provide the following performance benefits.
- Excellent high temperature oxidation and thermal stability for prolonged lubricant life
- Extremely low volatility resulting in less oil consumption
- Superior antiwear properties for reduced chain drag
- Does not form carbon residue as petroleum products do
- Maintain a clean operating environment for frame rails and chains
TYPICAL PROPERTIES
TYPICAL PROPERTIES
ArChine Synchain POE 150
Color(Fe-Co)≤,GB/T6540
2
Viscosity @40°C,cSt,GB/T265
140-155
Viscosity @100°C,cSt, GB/T265
20-23
Viscosity index(VI)≥,GB/T1995
125
Pour point °C, ≤,GB/T3535
-12
Flash point°C, ≥, GB/T267
320
Acid number mgKOH/g,≤,GB/T7304
0.5

TY lubricant oil purifier/oil recycling machine/oil filter plant

If you want to recovery used car oil, engine oil to new oil and resell it to market, this machine is what you need. contact me .

TY Series Turbine Oil Purifier
Technical Features:
The TY series integrate the gravity method, evaporation method, coacervation, vacuum separation and mechanical purification, utilizing coacervation, molecular absorption, vacuum drying and automatic demulsifying technologies which are capable of separating large and minimal amount of water from oil. Its high water removal and demulsifying efficiency makes turbid oil to be clear and limpid.
The precision multi-stage filter element can remove effectively various impurities, as it is a stage-to-stage densified filter element which could accommodate large amount of impurities and has a longer lifetime.
The advanced infrared level automatic control system, voice & light automatic alarm system and the pressure protection device ensure a safe and reliable operation.
Turbine oil and low viscosity lubricant oil can be treated online.
Use:
Widely applied to turbine, gas turbine and hydraulic turbine online oil treatment in the power, chemical, papermaking and metallurgic industries, ensuring adjustment to unit and smooth operation of lubricating system. It can also be used for treating low viscosity lubricant oil and cooling oil.



TY lubricant oil purifier/oil recycling machine/oil filter plant

If you want to recovery used car oil, engine oil to new oil and resell it to market, this machine is what you need. contact me .

TY Series Turbine Oil Purifier
Technical Features:
The TY series integrate the gravity method, evaporation method, coacervation, vacuum separation and mechanical purification, utilizing coacervation, molecular absorption, vacuum drying and automatic demulsifying technologies which are capable of separating large and minimal amount of water from oil. Its high water removal and demulsifying efficiency makes turbid oil to be clear and limpid.
The precision multi-stage filter element can remove effectively various impurities, as it is a stage-to-stage densified filter element which could accommodate large amount of impurities and has a longer lifetime.
The advanced infrared level automatic control system, voice & light automatic alarm system and the pressure protection device ensure a safe and reliable operation.
Turbine oil and low viscosity lubricant oil can be treated online.
Use:
Widely applied to turbine, gas turbine and hydraulic turbine online oil treatment in the power, chemical, papermaking and metallurgic industries, ensuring adjustment to unit and smooth operation of lubricating system. It can also be used for treating low viscosity lubricant oil and cooling oil.



Tempreture reduction agent for cement industry

Industrial lubricant additive
1 Power saving 5%-30%
2 Antiwear & friction
3 Improving efficiency
4.Extend service life
The instruction of Dunba Power Saving & Maintaining additives
for heavy equipment

1.Discription
Dunba Power Saving & Maintaining addtives for oil for heavy equipment is a power saving and environmental friendly products compound of Nano Metal Particle,polymer,and multifunctional additives,which is made of the newest technological fruit prduced by"national 863 plan".We have the intellectual property rights(Patent No. ZL200810032849.1). It has not only function of
super lubricating,selfrepairing but also of good antioxidation,and good antifriction.

2.Characteristic
1)
Save power 5%-30%,lubricant 50%;
2)Improving the resisting pressure and load capacity of lubricating oil, reducing impact load, and assure the minimum friction;
3)repair attrition dynamically,maitain equipment,reduce repair cost of the equipment effectively;
4)antiwear,reduce friction,reduce shake,cooling,reduce noise,improve efficiency,prolong the service lfe of equipment;
5)Mixed in virous lubricants,not changing the performance of lubricating oil,extend the period of changing oil;
6)Clean oil dirt,prevent malfunction,reduce mechanical accident;
7)The usage is simple and convenient,no damage for the construction of equipment.

3,Technical Characteristic
1)This product is produced by organic and inorganic nano materials, not only possessing the function of strong lubricating & resisting extreme pressure of organic material, but also having intelligent self-repair performance of inorganic nano material. In the process of friction, the nano particle is induced by the friction heat, rapidly penetrating into the micro defect on the surface of metal friction, quickly repairing uneven friction surface, and forming extra smooth,high hardness friction surface, not only reducing the friction coefficient, but also improving the performance of extreme pressure and anti-wear, thereby achieving the effect of power saving ,noise reduction and extending service life.

2)Stable performance,anti-oxidation,excellent dispersivity, mixed with any lubricating oil, no damage for the human body, environmental product.

3)Maintaining the equipment under extreme pressure, make the minimum friction.

Metal Friction surface comparison after and before using Dunba




(after) (before)

4.Application
This product is stable in various lubricants,is suitable for power-saving and maintainance of motive power and merchanical equipment in various fields such as steel,oil field,industry and mining,concrete,electricity,train,ship and other transportation.

5,Usage Instruction
Add mixed product to lubrication system, normal usage is about 1% of the total lubricating oil. If you have any problem, please consult the manufacturer.

6,Notice
1)Keep in normal temperature and avoid sunlight
2)Protect from impurity and water
3)Don't drink and avoid long-time skin contact

Test Industrial quenching oil cooling performance as IVF

1.Quenching oil quenchometer
2.Test cooling speed
3.Portable,easy operates,PLC
4.IS09950:1995 standards
5.Price advantage
KHR-A Portable Quenching Medium Performance Performance
detector
Patent product number:ZL2008 20069148.0;
Complies with international standards, facilitate with international advanced technology integration;
Direct determination of quench medium cooling rate, compare with traditional indirect method ,it is the more accurately determine the medium cooling performance;
Using portable achieved bath of dynamic measurement and control;
Product principle
This detector according to international standards IS09950:1995 manufacturing, adopt inside pack thermocouple nickel alloy probe testing medium performance curve test method of cooling. Will probe heated to specified temperature (usually for 850 °C), insert the waiting media cooling, through the internal microcomputer system records probe temperature on time and the cooling speed changes with temperature, and the internal four-color drawing printer will test results drawn by cooling process curve (temperature/time) and cooling characteristic curve (temperature/cold speed), Also can print the result into form output. According to the above results assess medium cooling performance.
Technical parameters
KHR instrument reliable quality function is well-found, High sensitivity repeatability and reproducibility; Carrying convenient operation easy long service life. By Henan technical supervision inspection approval, is the enterprise quality guarantee system of heat treatment process monitoring the necessary tools, is to improve product quality, reduce heat and avoiding waste effective means.
Product function

Adopts specially made probe for HSS quenching, Stainless steel solid melting ect performance test of cooling medium;
Heating process and cooling process of testing, such as induction hardening, large castings and forgings heat treatment process detection etc;
Setting RS232C interface and the corresponding software can will test results archived to external computers, carries on the manage
Determination of water-based quenching medium in different stir intensity (Tensi method cooling standard device) under the cooling performance.
Cooling curve method and analyzing the criterion of the principle
Maximum cold speed Vmax; Maximum speed Tvmax; where the temperature of cold 300 °C when cold speed v300; Cold to 600 °C, 400 °C and 200 °C time t400 and t200 t600.
Application
KHR instrument widely applied in reality check room standard again under the condition of different medium performance comparison testing, which is more suitable for the field work environment of cooling bath wake control, heat treatment is to improve the product quality, reduce and eliminate waste effective means.
For lab test equipment
For heat treatment plant
Cooling medium inspection
Main Technical specifications
Patent certificate

Test Industrial quenching oil cooling performance

1.Quenching oil quenchometer
2.Test cooling speed
3.Portable,easy operates,PLC
4.IS09950:1995 standards
5.Price advantage
KHR-A Portable Quenching Medium Performance Performance
detector
Patent product number:ZL2008 20069148.0;
Complies with international standards, facilitate with international advanced technology integration;
Direct determination of quench medium cooling rate, compare with traditional indirect method ,it is the more accurately determine the medium cooling performance;
Using portable achieved bath of dynamic measurement and control;
Product principle
This detector according to international standards IS09950:1995 manufacturing, adopt inside pack thermocouple nickel alloy probe testing medium performance curve test method of cooling. Will probe heated to specified temperature (usually for 850 °C), insert the waiting media cooling, through the internal microcomputer system records probe temperature on time and the cooling speed changes with temperature, and the internal four-color drawing printer will test results drawn by cooling process curve (temperature/time) and cooling characteristic curve (temperature/cold speed), Also can print the result into form output. According to the above results assess medium cooling performance.
Technical parameters
KHR instrument reliable quality function is well-found, High sensitivity repeatability and reproducibility; Carrying convenient operation easy long service life. By Henan technical supervision inspection approval, is the enterprise quality guarantee system of heat treatment process monitoring the necessary tools, is to improve product quality, reduce heat and avoiding waste effective means.
Product function

Adopts specially made probe for HSS quenching, Stainless steel solid melting ect performance test of cooling medium;
Heating process and cooling process of testing, such as induction hardening, large castings and forgings heat treatment process detection etc;
Setting RS232C interface and the corresponding software can will test results archived to external computers, carries on the manage
Determination of water-based quenching medium in different stir intensity (Tensi method cooling standard device) under the cooling performance.
Cooling curve method and analyzing the criterion of the principle
Maximum cold speed Vmax; Maximum speed Tvmax; where the temperature of cold 300 °C when cold speed v300; Cold to 600 °C, 400 °C and 200 °C time t400 and t200 t600.
Application
KHR instrument widely applied in reality check room standard again under the condition of different medium performance comparison testing, which is more suitable for the field work environment of cooling bath wake control, heat treatment is to improve the product quality, reduce and eliminate waste effective means.
For lab test equipment
For heat treatment plant
Cooling medium inspection
Main Technical specifications
Patent certificate

Test Industrial quenching oil quenching water cooling performance and cooling characteristic

1.Quenching oil quenchometer
2.Test cooling speed
3.Portable,easy operates,PLC
4.IS09950:1995 standards
5.Price advantage
KHR-A Portable Quenching Medium Performance Performance
detector
Patent product number:ZL2008 20069148.0;
Complies with international standards, facilitate with international advanced technology integration;
Direct determination of quench medium cooling rate, compare with traditional indirect method ,it is the more accurately determine the medium cooling performance;
Using portable achieved bath of dynamic measurement and control;
Product principle
This detector according to international standards IS09950:1995 manufacturing, adopt inside pack thermocouple nickel alloy probe testing medium performance curve test method of cooling. Will probe heated to specified temperature (usually for 850 °C), insert the waiting media cooling, through the internal microcomputer system records probe temperature on time and the cooling speed changes with temperature, and the internal four-color drawing printer will test results drawn by cooling process curve (temperature/time) and cooling characteristic curve (temperature/cold speed), Also can print the result into form output. According to the above results assess medium cooling performance.
Technical parameters
KHR instrument reliable quality function is well-found, High sensitivity repeatability and reproducibility; Carrying convenient operation easy long service life. By Henan technical supervision inspection approval, is the enterprise quality guarantee system of heat treatment process monitoring the necessary tools, is to improve product quality, reduce heat and avoiding waste effective means.
Product function

Adopts specially made probe for HSS quenching, Stainless steel solid melting ect performance test of cooling medium;
Heating process and cooling process of testing, such as induction hardening, large castings and forgings heat treatment process detection etc;
Setting RS232C interface and the corresponding software can will test results archived to external computers, carries on the manage
Determination of water-based quenching medium in different stir intensity (Tensi method cooling standard device) under the cooling performance.
Cooling curve method and analyzing the criterion of the principle
Maximum cold speed Vmax; Maximum speed Tvmax; where the temperature of cold 300 °C when cold speed v300; Cold to 600 °C, 400 °C and 200 °C time t400 and t200 t600.
Application
KHR instrument widely applied in reality check room standard again under the condition of different medium performance comparison testing, which is more suitable for the field work environment of cooling bath wake control, heat treatment is to improve the product quality, reduce and eliminate waste effective means.
For lab test equipment
For heat treatment plant
Cooling medium inspection
Main Technical specifications
Patent certificate

Textile Equipment Synthetic Base PTFE Lubricanting Grease

Textile Equipment Synthetic Base PTFE Lubricanting Grease
Clean, non-toxic, non-staining
USDA Rating H 1
Product Information
FUKKOL Textile Equipment Synthetic Base PTFE Lubricanting Grease is a patented synthetic NLGL grade 2 heavy-duty, multipurpose lubricant with PTFE. Synthetic base fluids and the addition of PTFE micro powders longer life protection against friction, wear, rust and corrosion. Machinery lasts longer, downtime is reduced, and productivity is increased.
FUKKOL XerXes Synthetic Base PTFE GREASE is a USDA listed Food Grade lubricant, rated H-1.
Product Application
·Plain, anti-friction, ball, roller, wheel bearings
·Cams, slides, valves, conveyors, chains
·Food processing equipment
·O-Ring Lubricant
·Paper Corrugating Bearings
·Chemical Plant Maintenance
·Valve Lubricant
·Clean Rooms
·Textile Equipment
·Antilock Braking Systems
·High-Vacuum Greases
Virtue
·Clean, non-toxic, non-staining
·USDA Rating H-1
·Will not drip, run or evaporate
·Wide Temperature Range -40°to 450°F
·PWater Resistant and Anti acid & alkali

Textile chain lubricant

1.used on ejectot pin ,chain
2.No carbonization,no melting,no flow out
3.1400 degree
4.White-coloured,non-staining



FUKKOL H.T. PASTE

http://www.fukkol-lube.com/asp-bin/EN/?page=1

Pretty small consumption ,10gram for one set normally.

it can last around 8000 processing times

no carbonization, no melting and no flow out,great choose for food processing machine.

temperature(max)

1400 degree
operation condition

Low speed
,
oscillating motion

material (available)

steel
,
non-ferrous

metal screw
,
plug,
bayonet joints
.
product life cycle

8000 processing times/white film is destroy
Apply to

nuts and

bolts,sockcts and spindles in refurenes,
steel-and cement mills,

marine and agriculture
function characteristic
anti-seize, anti-wear,ant-corrosion,high temperature
chemical features

White-coloured
,
non-staining,dry film lubricant
additives

anti-oxidation,anti-corrosion,lubricants,etc
Environment

non-toxic,no ferrous metals,graphite,molybdenum-disulphide and sulphide
Certificate

FDA,SGS,ROSH


Typical physical properties
Appearance
White color

Basc
Synthetic oil compound with organic thickener
and combination of white solid lubricants

Unworked penetration
280-320

Specific gravity
1.2g/cc at 20°C

Dropping point
None

Base oil viscosity
21mm2/s at 40°C
Temperature range
-40°C~+1400°C

Friction value
0.10-0.13
Degree of corrosion
1-90

Depth of wear
0.3um
Salt spray test
>500 hours

Four-ball tester(VKA)
3800/4000N
Description:
A white non-carbonized-under-high-temperature lubricating paste for lubrication of all kinds of surfaces subject to high load,
particularly operation at low speed and/or
oscillating motion
and of
steel
and
non-ferrous

metal
screw
,
plug and bayonet joints
.

Applications:
-Anti-Seizing non-destructive disassembly of threaded conncetions subject to high temperatures,
i.e. at internal combustion engines and turbines oven after long service time.
-Corrosion protection for nuts and
bolts,sockcts and spindles in refurenes, steel-and cement mills,
marine and agriculture
.


Benefits:
-Best use-
ONE single paste for MANY application
s
;
-
White-coloured
,
non-staining
,
outstanding lubricity
-
High pressure
,
low friction
and
low wear resistance
, reliable
anti-seize
effect and
corrosion protection
.
-Economical and ecological solution for many plants and shops which have been depending
on a number of special pastes so far.
-contains organic active molybdenum additive for increased performance.

Environment:
Ecology - FUKKOL H.T PASTE is non-toxic,contains no ferrous metals and is free from graphite ,
molybdenum-disulphide and sulphide additives.






Textile coating paraffin wax

1.20 years producing experience
2.paraffin wax 58-60 granular/bulk
3.paraffin wax for Textile coating
4.fully&semi refined
Grades of paraffin wax 58-60:
Semi Refined Paraffin Wax,Fully Refined Paraffin Wax
paraffin wax 58-60 Features:
Toughness, good plasticity, white color,have good moisture proof and insulation
paraffin wax 58-60 application:
1.Semi Refined Paraffin Wax can be used in candle making,high-frequency porcelain, carbon paper, stylus stencil, precision casting, decorative acoustic board and other products.
2.Fully Refined Paraffin Wax is usually used as telecommunications equipment and short-circuit and light industry, chemical raw materials.
Semi-refined Granular Paraffin wax
Item
54
56
58
60
Melting point
54-56
56-58
58-60
60-62
Oil content
1.8% Max
Chroma
17 Min
Light invariability
6 Max
7 Max
Needle entering(25, 100G)
23 Max
Smell number
2 Max
Physical impurity and moisture
None


(2)Full-refined Paraffin wax
Item
54
56
58
60
Melting point
54-56
56-58
58-60
60-62
Oil content
0.8% Max
Chroma
25 Max
29 Max
Light invariability
4 Max
3 Max
Needle entering(25, 100G)
19 Max
17 Max
Smell number
2 Max
Physical impurity and moisture
None


Our factory
Our warehouse

The best Multipurpose Lithium Base Grease products

The best Multipurpose Lithium Base Grease products
1mechanical stability
2water-resistant
3anti-corrosion
Strong universalit
The best Multipurpose Lithium Base Grease Products
Product Description
The product is formulated by using higher fatty acid lithium soap as a thickener and refined mineral oil as the base oil, adding antioxidant, antirust additive and other additives. The product is widely used and could meet the lubrication of bearings in general mechanical equipments. The production method of this product has applied for national invention patent. The quality of the product is in accordance with the standard of GB7324 -1994.

Fields of Application
The product is suitable for the lubrication of rolling and plain bearings in general machines and vehicles. 1# and 2# product are suitable for integral lubrication system, and 3# product is suitable for manual lubricating.
Applicable Temperature Range:-20-120
0
C.

Performance Characteristics
u Appearance is light transparent yellow and soap fiber is uniformly fine.
u Good mechanical stability, not easily thinning during the operation process, and with longer service life.
u Good water-resistant property, not easy to leak out.
u Excellent anti-corrosion function, which could effectively protect the bearing from being rusty.
u Strong universality, could replace the calcium-base grease, sodium-base grease and many other ordinary soap greases.

Product Varieties
Available grease consistency numbers are 1#, 2# and 3#.

Application Notice
According to the regulations of lubricating grease for equipments, to choose the appropriate quality level and consistency number product; the storage and transportation process must be water-proof, moisture-proof and avoid mixing mechanical impurities; anti-pollution; different quality levels of products cannot be mixed; Centralized Treatment for replaced old grease to prevent environment pollution.

Typical Data
Item
1#
2#
3#
Test Method
Appearance
Light yellow smooth ointment
Visual estimation
Worked Penetration, 0.lmm
320
285
235
GB/T269
Dropping Point,
0
C
185
188
190
GB/T 4929
Oil separation (100
0
C,24h),%
5
4
1
SH/T 0324
Evaporation (99
0
C,22h),%
0.6
0.5
0.5
GB/T 7325
Extension of Worked Penetration (100,000),0.lmm
340
305
270
GB/T 269
Water Washout Losses (38
0
C,1h ),%
2.2
1.8
1.5
SH/T 0109
Corrosion Preventive Property (52
0
C,48h ),Grade
1
1
1
GB/T 5018

ArChine Synchain POE 150

1,Hi-Temp Chain Oils, POE chain oil
2,Chain Oil, chain lubricants, oven oil
3,ArChine Synchain POE 150
Distributor Wanted
PRODUCT DESCRIPTION
ArChine Synchain POE series products are synthetic POE high temperature lubricants designed primarily for
high temperature equipment, such as oven chains and tenter frame ovens, as well as paint and
ceramic curing ovens. Satisfactory performance can also be expected in applications involving bearing
lubrication. Formulated from a quality synthetic basestock and additive system,
ArChine Synchain POE series products provide the following performance benefits.
- Excellent high temperature oxidation and thermal stability for prolonged lubricant life
- Extremely low volatility resulting in less oil consumption
- Superior antiwear properties for reduced chain drag
- Does not form carbon residue as petroleum products do
- Maintain a clean operating environment for frame rails and chains
TYPICAL PROPERTIES
TYPICAL PROPERTIES
ArChine Synchain POE 150
Color(Fe-Co)≤,GB/T6540
2
Viscosity @40°C,cSt,GB/T265
140-155
Viscosity @100°C,cSt, GB/T265
20-23
Viscosity index(VI)≥,GB/T1995
125
Pour point °C, ≤,GB/T3535
-12
Flash point°C, ≥, GB/T267
320
Acid number mgKOH/g,≤,GB/T7304
0.5

The hydrocarbon resin for marine paints(DA201)

With light color and high bromine, the hydrocarbon resin (DA101) is used for a widespread application.
The hydrocarbon resin (DA201) has a good compatibility with ester and polyurethane solvents. In the ester solvent, DA201 has a good compatibility with epoxy resin, furthermore it has a good curing speed with epoxy resin.
DA201 can be used as the modifier for the marine paints and some other special paints like nitrolacquer paints. By added in, it can reduce the convergent force of the epoxy resin, improve the adhesion of paint as well as the shrinkage force to the cement and steel, furthermore, it also can strengthen the wetting property to paint and improve the leveling property of paint film.

Using for :
Marine paint, Nitrate paint , Alkyd paint, Epoxy resin, Polyester paint, Adhesives Electrical-related industry

The most popular Lab Equipment for quenching oil

1.Quenching oil quenchometer
2.Test cooling speed
3.Portable,easy operates,PLC
4.IS09950:1995 standards
5.Price advantage
KHR-A Portable Quenching Medium Performance Performance
detector
Patent product number:ZL2008 20069148.0;
Complies with international standards, facilitate with international advanced technology integration;
Direct determination of quench medium cooling rate, compare with traditional indirect method ,it is the more accurately determine the medium cooling performance;
Using portable achieved bath of dynamic measurement and control;
Product principle
This detector according to international standards IS09950:1995 manufacturing, adopt inside pack thermocouple nickel alloy probe testing medium performance curve test method of cooling. Will probe heated to specified temperature (usually for 850 °C), insert the waiting media cooling, through the internal microcomputer system records probe temperature on time and the cooling speed changes with temperature, and the internal four-color drawing printer will test results drawn by cooling process curve (temperature/time) and cooling characteristic curve (temperature/cold speed), Also can print the result into form output. According to the above results assess medium cooling performance.
Technical parameters
KHR instrument reliable quality function is well-found, High sensitivity repeatability and reproducibility; Carrying convenient operation easy long service life. By Henan technical supervision inspection approval, is the enterprise quality guarantee system of heat treatment process monitoring the necessary tools, is to improve product quality, reduce heat and avoiding waste effective means.
Product function

Adopts specially made probe for HSS quenching, Stainless steel solid melting ect performance test of cooling medium;
Heating process and cooling process of testing, such as induction hardening, large castings and forgings heat treatment process detection etc;
Setting RS232C interface and the corresponding software can will test results archived to external computers, carries on the manage
Determination of water-based quenching medium in different stir intensity (Tensi method cooling standard device) under the cooling performance.
Cooling curve method and analyzing the criterion of the principle
Maximum cold speed Vmax; Maximum speed Tvmax; where the temperature of cold 300 °C when cold speed v300; Cold to 600 °C, 400 °C and 200 °C time t400 and t200 t600.
Application
KHR instrument widely applied in reality check room standard again under the condition of different medium performance comparison testing, which is more suitable for the field work environment of cooling bath wake control, heat treatment is to improve the product quality, reduce and eliminate waste effective means.
For lab test equipment
For heat treatment plant
Cooling medium inspection
Main Technical specifications
Patent certificate

The oil for aluminium foil rolling

1.Metal Cutting Fluids,
2. Rust Preventives,
3. Aluminum Rolling Oils
Item Target
D80
D100
Test way
Flash point(closed) ≤
80
100
GB/T261
Arene content % ≥
0.3
0.3
SH/T0409
Sulphur content ppm ≥
2
2
SH/T0453
Kinematic viscosity(40), mm2/s
1.5-1.8
2.0-2.4
GB/T265
Acid number,MgKOH/g
0.01
0.02
GB/T264
Iodine value,GI/100g
0.4
0.4
GB/T0234
Eroding test (sheet copper,50,3h)
qualified
qualified
GB/T378
Annealing property testing
qualified
qualified
QB/TCL15
Moisture content, %
none
none
GB/T260
Mechanical impurities and moisture content, %
none
none
GB/T511
Colour comparison saybolt value ≤
+30
+25
GB/T3555
Inspected by U.S. Food and Drug Adminisration under standard as FDA-21CFR178.3620.
qualified
qualified
SH/T0415
If any items interest you, please feel free to let us know. we sincerely hope to cooperate with you.

Thermal Conductive Heat Sink Compound Grease

Thermal Conductive Heat Sink Compound Grease 4g
a metal oxide filled dielectric thermal transfer agent.
Thermal Conductive Heat Sink Compound Grease 4g
Description
Fukkol heat sink compound is a metal oxide filled dielectric thermal transfer agent. It is commonly used in electrical and electronic industries as a thermal transfer medium for facilitating heat dissipation between power components in electrical/electronic assemblies. And heat sink in the assembly process by filling the voids and gaps between the mated surfaces.

Characteristics

Temperature range

-40 °F(-40°C)to 400 °F(204°C)
Apperaance

White opaque

Bleed (204OC in 24 hrs)

1%MAX
NLGI Classification

1-2
Penetration (worked)

265-295
Evaporation(204OC in 24 hrs)

1%MAX
Water Resistance

Excellent
Thermal Conductivity

0.3
Specific Gravity

2.5

Thermal Conductive Heat Sink Compound lubricnat grease

Thermal Conductive Heat Sink Compound lubricnat grease
a metal oxide filled dielectric thermal transfer agent.
Thermal Conductive Heat Sink Compound lubricnat grease
Description
Fukkol heat sink compound is a metal oxide filled dielectric thermal transfer agent. It is commonly used in electrical and electronic industries as a thermal transfer medium for facilitating heat dissipation between power components in electrical/electronic assemblies. And heat sink in the assembly process by filling the voids and gaps between the mated surfaces.

Characteristics

Temperature range

-40 °F(-40°C)to 400 °F(204°C)
Apperaance

White opaque

Bleed (204OC in 24 hrs)

1%MAX
NLGI Classification

1-2
Penetration (worked)

265-295
Evaporation(204OC in 24 hrs)

1%MAX
Water Resistance

Excellent
Thermal Conductivity

0.3
Specific Gravity

2.5

Thermal Conductive Heat Sink Compound

Thermal Conductive Heat Sink Compound Grease
a metal oxide filled dielectric thermal transfer agent.
Thermal Conductive Heat Sink Compound Grease
Description
Fukkol heat sink compound is a metal oxide filled dielectric thermal transfer agent. It is commonly used in electrical and electronic industries as a thermal transfer medium for facilitating heat dissipation between power components in electrical/electronic assemblies. And heat sink in the assembly process by filling the voids and gaps between the mated surfaces.

Characteristics

Temperature range

-40 °F(-40°C)to 400 °F(204°C)
Apperaance

White opaque

Bleed (204OC in 24 hrs)

1%MAX
NLGI Classification

1-2
Penetration (worked)

265-295
Evaporation(204OC in 24 hrs)

1%MAX
Water Resistance

Excellent
Thermal Conductivity

0.3
Specific Gravity

2.5

Thermal Conductive Compound/ Heat Sink Compound

Thermal Conductive Compound/ Heat Sink Compound
a metal oxide filled dielectric thermal transfer agent.
Thermal Conductive Compound/ Heat Sink Compound
Description
Fukkol heat sink compound is a metal oxide filled dielectric thermal transfer agent. It is commonly used in electrical and electronic industries as a thermal transfer medium for facilitating heat dissipation between power components in electrical/electronic assemblies. And heat sink in the assembly process by filling the voids and gaps between the mated surfaces.

Characteristics

Temperature range

-40 °F(-40°C)to 400 °F(204°C)
Apperaance

White opaque

Bleed (204OC in 24 hrs)

1%MAX
NLGI Classification

1-2
Penetration (worked)

265-295
Evaporation(204OC in 24 hrs)

1%MAX
Water Resistance

Excellent
Thermal Conductivity

0.3
Specific Gravity

2.5

Thermal Expansion Wax

Thermal Expansion Wax
Automatic Temperature Regulating Agent Low Temperature Series
Thermal Expansion Wax
Automatic Temperature Regulating Agent Low Temperature Series
Model Number
Appearance
(Normal Temperature)
Quality Standard
Range of Temperature Control
Effective Distance
Travel
Water-Solubility Acid and Alkali
Mechanical Impurity
A30-1
Powder, Cream
30/40
7
Non.
Non.
A30-2
Powder, Cream
30/40
10
Non.
Non.
A30-3
Powder, Cream
3045
10
Non.
Non.
A30-4
Powder, Cream
30/60
8
Non.
Non.
A30-5
Powder, Cream
30/65
4
Non.
Non.
A30-6
Powder, Cream
30/85
10
Non.
Non.
A32
Powder, Cream
32/60
4
Non.
Non.
A33
Powder, Cream
33/45
6
Non.
Non.
A35
Powder, Cream
35/45
5
Non.
Non.
A35-1
Powder, Cream
35/45
10
Non.
Non.
A35-2
Powder, Cream
35/50
8
Non.
Non.
A36
Powder, Slice , Column
36/62
5.5
Non.
Non.
A37
Powder, Slice , Column
37/47
9
Non.
Non.
A38
Powder, Slice , Column
38/50
7
Non.
Non.
A40
Powder, Slice , Column
40/50
7
Non.
Non.
A40-1
Powder, Slice , Column
40/50
10
Non.
Non.
A40-2
Powder, Slice , Column
40/64
4
Non.
Non.
A40-3
Powder, Slice , Column
40/80
8
Non.
Non.
A42
Powder, Slice , Column
42/68
5
Non.
Non.
A43
Powder, Slice , Column
43/48
6
Non.
Non.
A43-1
Powder, Slice , Column
43/55
7
Non.
Non.

Thermal Expansion Wax

Thermal Expansion Wax
refrigeration, auto-control system, automobile industry, petrochemical industry.
Thermal Expansion Wax
Automatic Temperature Regulating Agent Low Temperature Series
Model Number
Appearance
(Normal Temperature)
Quality Standard
Range of Temperature Control
Effective Distance
Travel
Water-Solubility Acid and Alkali
Mechanical Impurity
A13
Powder, Cream
13/26
6
Non.
Non.
A15
Powder, Cream
15/25
7
Non.
Non.
A15-1
Powder, Cream
15/60
4
Non.
Non.
A16
Powder, Cream
16/30
2
Non.
Non.
A18
Powder, Cream
18/30
6
Non.
Non.
A20
Powder, Cream
20/30
8
Non.
Non.
A20-1
Powder, Cream
20/30
10
Non.
Non.
A20-2
Powder, Cream
20/35
11
Non.
Non.
A20-3
Powder, Cream
20/50
3.5
Non.
Non.
A20-4
Powder, Cream
20/55
4
Non.
Non.
A22
Powder, Cream
22/30
3
Non.
Non.
A22-1
Powder, Cream
22/32
7
Non.
Non.
A22-2
Powder, Cream
22/55
4
Non.
Non.
A22-3
Powder, Cream
22/85
7
Non.
Non.
A23
Powder, Cream
23/34
5
Non.
Non.
A23-1
Powder, Cream
23/65
5
Non.
Non.
A23-2
Powder, Cream
23/80
5
Non.
Non.
A24
Powder, Cream
24/72
5
Non.
Non.
A25
Powder, Cream
25/35
8
Non.
Non.
A25-1
Powder, Cream
25/60
7
Non.
Non.
A25-2
Powder, Cream
25/100
7
Non.
Non.
A26
Powder, Cream
26/52
3
Non.
Non.
A26-1
Powder, Cream
26/65
4.5
Non.
Non.
A28
Powder, Cream
28/40
6
Non.
Non.
A28-1
Powder, Cream
28/53
7
Non.
Non.
A29
Powder, Cream
29/42
7
Non.
Non.
A30
Powder, Cream
30/40
7
Non.
Non.

Thermal Expansion Wax

Thermal Expansion Wax
Automatic Temperature Regulating AgentMedial Temperature Series
Thermal Expansion Wax
Automatic Temperature Regulating Agent Medial Temperature Series
Model Number
Appearance
(Normal Temperature)
Quality Standard
Range of Temperature Control
Effective Distance
Travel
Water-Solubility
Acid and Alkali
Mechanical Impurity
A45
Powder, Slice , Column
45/55
7
Non.
Non.
A45-1
Powder, Slice , Column
45/55
10
Non.
Non.
A45-2
Powder, Slice , Column
45/60
11
Non.
Non.
A48
Powder, Slice , Column
48/60
7
Non.
Non.
A50
Powder, Slice , Column
50/60
8
Non.
Non.
A50-1
Powder, Slice , Column
50/75
6
Non.
Non.
A51
Powder, Slice , Column
51/60
10
Non.
Non.
A52
Powder, Slice , Column
52/55
3
Non.
Non.
A53
Powder, Slice , Column
53/59
7
Non.
Non.
A54
Powder, Slice , Column
54/67
9
Non.
Non.
A55
Powder, Slice , Column
55/62
7
Non.
Non.
A55-1
Powder, Slice , Column
55/65
10
Non.
Non.
A55-2
Powder, Slice , Column
55/70
11
Non.
Non.
A57
Powder, Slice , Column
57/66
10
Non.
Non.
A58
Powder, Slice , Column
58/70
8
Non.
Non.
A60
Powder, Slice , Column
60/70
6
Non.
Non.
A60-1
Powder, Slice , Column
60/70
10
Non.
Non.
A60-2
Powder, Slice , Column
60/75
4
Non.
Non.
A60-3
Powder, Slice , Column
60/75
11
Non.
Non.
A60-4
Powder, Slice , Column
60/80
2
Non.
Non.
A60-5
Powder, Slice , Column
60/85
10
Non.
Non.
A60-6
Powder, Slice , Column
60/100
5
Non.
Non.
A63
Powder, Slice , Column
63/75
8
Non.
Non.

ArChine Synchain POE 150

1,chain oil, poe chain oil
2, chain lube,POE synthetic chain oil
3, chain lubricant
4, high temp chain oil
ArChine Synchain POE 150

PRODUCT DESCRIPTION
ArChine Synchain POE 150 product is synthetic POE high temperature lubricants designed primarily for high temperature equipment, such as oven chains and tenter frame ovens, as well as paint and ceramic curing ovens. Satisfactory performance can also be expected in applications involving bearing lubrication. Formulated from a quality synthetic basestock and additive system, ArChine Synchain POE 150 provide the following performance benefits.
- Excellent high temperature oxidation and thermal stability for prolonged lubricant life
- Extremely low volatility resulting in less oil consumption
- Superior antiwear properties for reduced chain drag
- Does not form carbon residue as petroleum products do
- Maintain a clean operating environment for frame rails and chains

TYPICAL PROPERTIES
TYPICAL PROPERTIES
ArChine Synchain POE 150
Appearance
Transparent liquid
Density 20°C g/cm
3
0.940
Viscosity 40°C mm
2
/s
171.0
Viscosity 100°C mm
2
/s
22.0
Viscosity index
154
Flash point (°C)
328
Fire point(°C)
356
Pour point °C
-30
Copper corrosion 100°C 3hr grade
1

Thermal Expansion Wax

Thermal Expansion Wax
Automatic Temperature Regulating AgentHigh Temperature Series
Thermal Expansion Wax
Automatic Temperature Regulating Agent High Temperature Series
Model Number
Appearance
(Normal Temperature)
Quality Standard
Range of Temperature Control
Effective Distance
Travel
Water-Solubility
Acid and Alkali
Mechanical Impurity
A81
Powder, Slice , Column
81/90
10
Non.
Non.
A82
Powder, Slice , Column
82/92
10
Non.
Non.
A83
Powder, Slice , Column
83/95
8
Non.
Non.
A85
Powder, Slice , Column
85/95
10
Non.
Non.
A85-1
Powder, Slice , Column
85/95
5
Non.
Non.
A85-2
Powder, Slice , Column
85/97
8
Non.
Non.
A85-3
Powder, Slice , Column
85/100
9
Non.
Non.
A86
Powder, Slice , Column
86/98
8
Non.
Non.
A87
Powder, Slice , Column
87/98
8
Non.
Non.
A89
Powder, Slice , Column.
89/102
8
Non.
Non.
A90
Powder, Slice , Column
90/100
8
Non.
Non.
A91
Powder, Slice , Column
91/101
11
Non.
Non.
A93
Powder, Slice , Column
93/106
8
Non.
Non.
A93-1
Powder, Slice , Column
93/118
12
Non.
Non.
A95
Powder, Slice , Column
95/105
8
Non.
Non.

Thermal Expansion Wax

Thermal Expansion Wax.
Automatic Temperature Regulating AgentHigh Temperature Series
Thermal Expansion Wax
Automatic Temperature Regulating Agent High Temperature Series
Model Number
Appearance
(Normal Temperature)
Quality Standard
Range of Temperature Control
Effective Distance
Travel
Water-Solubility
Acid and Alkali
Mechanical Impurity
A98
Powder, Slice , Column
98/111
8
Non.
Non.
A100
Powder, Slice , Column
100/110
3
Non.
Non.
A100-1
Powder, Slice , Column
100/110
7
Non.
Non.
A100-2
Powder, Slice , Column
100/120
8
Non.
Non.
A105
Powder, Slice , Column
105/120
6
Non.
Non.
A108
Powder, Slice , Column
108/116
8
Non.
Non.
A110
Powder, Slice , Column
110/120
5
Non.
Non.
A110-1
Powder, Slice , Column
110/120
7
Non.
Non.
A120
Powder, Slice , Column
120/140
6
Non.
Non.
A120-1
Powder, Slice , Column
120/160
8
Non.
Non.
A145
Powder, Slice , Column
145/165
7
Non.
Non.
A160
Powder, Slice , Column
160/180
4
Non.
Non.
A160-1
Powder, Slice , Column
160/200
10
Non.
Non.
A200
Powder, Slice , Column
200/220
7
Non.
Non.
A200-1
Powder, Slice , Column
200/230
7
Non.
Non.

Thursday, March 17, 2011

Thermal Transfer Oil

Thermal Transfer Oil
1. No poison
2. No pollution
3. Modest viscosity
4. Good conductibility
Specifications of Thermal Transfer Oil:

Apperance: yellowish & transparent.
1) Density at 20°C: 0.84 - 0.89g/cm³
2) Kinematic viscosity at 50°C: 23 - 33mm²/s
3) Flash point open cup: ≥210°C
4) Vacuum distil: ≥360°C in 2%v/v
5) Solidify point: ≤-10°C
6) Acid number ≤0.05mg KOH/g
7) Carbon residue conradson method: ≤0.02%
8) Ash content: ≤0.02%
9) Copper strip level: 1
10) Coefficient of thermal expansion: (6.26-6.91)*10
-4
11) Specific heat: 2.4kj/kg in 100°C while 2.82kj/kg in 200°C.
12) Transfer heat coefficient: 0.474kj/m in 100°C while 0.448kj/m in 200°C.
13) prandtl coefficient: 230.364 in 20°C.

Thimble lubricant

1. suitable for various injection molding machine timbles.
2. anti-wear , antirust and protection function,High temperature
1.Usage:
suitable for various injection molding machine timbles.especially for the
central lubrication system.lubrication of moving parts ,electronics and toys.
2.Advantages:
High-quality lubricating oil of good oxidation stability, anti-wear
and adhesion additives, so as to prevent mechanical machining guide and slide
surface in operation (stick - slip) of the negative phenomena, effectively extend
life of the mechanical pPart . with excellent antirust and protection
function.Excellent anti-wear protection.


N'W
G'W
290g
340g
Update Date:2011-2-13 0:04:44

Thin film antirust oil for iron and steel

1) long antirust lifetime,
2)small ordor
3) easy to operate
F20-1 antirust oil Specification
This product is modulates by many kinds of chemical additives such as the mineral oil, the solvent oil, the rust-preventing agent, the oxidation inhibitor and so on under the specific craft.
1.Character and Useage
This product is the sealing-up antirust oil, mainly used against rust and for lubrication and usually used under the normal temperature. F20-1 antirust oil has the good rust prevention performance regarding to carbon steel, bearing steel, H62 brass, the aluminum alloy and the bluing and so on, to the galvanization, the plate with cadmium and the deactivation also has the good compatibility, and has the merits of long antirust lifetime, small ordor and easy to operate
2.Technical Indicator
Item
quality indicator
test method
Oil appearance
brownish red oil fluid
visual measurement
corrosion test
(copper,steel,aluminum 7d)
standard
Sh/t0080
laminated test
(steel,copper, aluminum 49±1°C/DRH>95percent)no less than
7
Sh/t0367-92
oil stability
standard

water content% no more than
trace
GB/T260-88
salt spray test
(cpper,steel)/d no less than

7
SH/T0081
wet-hot test (copper, steel,aluminum 49±1°CRH.95 percent)/d no less than
14
GB/T2361
Displacement of human sweat
15-30°C24hRH100 percent steel
rustless
SH/T0107
3.Usage method
When F20-1 antirust oil serves as sealing and rust prevention, first use the solvent oil or the burning kerosene clean the protection one or two times, after drying, brush or immerse the protection into this antirust oil for 1~3 minutes, and then add the inside and outside packing .The rust-proof life can be one year above.
4.Packaging and Storage
Packaging: 18kg/ 170kg iron barrel
Storage:indoor storehouse

Thinner

The thinner FYPE supplies can be used in high-temperature (260 deg), high-density and extra-deep well.

The thinner FYPE supplies can be used in high-temperature (260 ), high-density and extra-deep well.
ADVANTAGES
Good anti- temperature ability
Better thinner effect
Has good anti-sloughing performance
Non-toxic and non-pollution
TECHNICAL SPECIFICATIONS:
Appearance
Black sticky liquid
Solid content
≥25.0%
pH value
1013
Relative expansion ratio
≤50.0%
Thinning ratio at room temperature
≥80.0%
Thinning ratio after high temperature ageing for 16h at 180
≥80.0%

Thiourea

thiourea
Reliable quality, Stable supply and Favourable price.
Thiourea
Molecular formula:
CH
4
N
2
S
Structural formula:
Molecular weight:
76.12
Properties:
Thiourea is white grain, lustrous crystal, bitter, specific gravity of 1.406,melting point ≥171°C
Specifications:
in accordance with HG/T3266-1988



Thiourea content%≥
99.00

heating reduction%≤
0.40

Sulphated Ash%≤
0.10

Water Insoluble%≤
0.02

Thiocyanate (CNS)%≤
0.02

melting point°C≥
171

use:
Thiourea is mainly used to produce Thiourea Dioxide. It is widely used in medicine (Sulfathiazole, Methylthiouracil, niridazole and Fluorouracil), pesticide (insecticide, bactericide, acaricide, herbicide and virus prevention and cure and so on), chemical fertilizer (nitrogenous fertilizer synergist), silk making, agriculture and metal mine choosing

Thmeral Plastic Mould Release Agent

it can provide a quick, effective, non - staining release of plastics and rubber for most types of plastic injection moulding.
Product Information
FUKKOL MOULD RELEASE AGENT PAINTABLE is an aerosol applied release agent formulated to provide a quick, effective, non - staining release of plastics and rubber for most types of plastic injection moulding. In addition, it is specially designed for products subject to subsequent processes such ad printing, painting, plating, hot stamping and bonding operations without the so - called “SILICONE PROBLEMS”.

Virtue
*Ultra fine spray gives controlled application with complete coverage
*Improved finish and reduced risk of over application
*Reduces problems associated with marking and transfer, highly economical, efficient release, only one pass required for many shots of ejection
*Effective and long lasting film provides more numbers of release than most silicone formulations
*Low environmental impact, contains no CFC propellant
*Excellent for all thermal plastic, especially ABS and PS
*Will not affect subsequent operations.
*Excellent lubricant for sewing threads, table surface , needles and knives.

Thread Locking Adhesive compare with loctite adhesive

Thread Locking Adhesive compare with loctite adhesive
242: Removeable
271: Strong strength
638: Vibration resistance
Thread Locking Adhesive compare with loctite adhesive

Thread Lock Adhesive is single component glue that prevents the position of threaded connections ( screws bolts) from shifting and loosening in their own due to vibrations.

Thread Lock Adhesive
creates a bond as air between the screw amd the socket is pushed out.

The exact time required for threadlocker to fully set depends on the ambient temperature and how sung the joint is between the bonded components.

Thread Locking Adhesive

Thread Locking Adhesive
242: Removeable
271: Strong strength
638: Vibration resistance
Thread Locking Adhesive is single component glue that prevents the position of threaded connections ( screws bolts) from shifting and loosening in their own due to vibrations.

Thread Locking Adhesive
creates a bond as air between the screw amd the socket is pushed out.

The exact time required for threadlocker to fully set depends on the ambient temperature and how sung the joint is between the bonded components.

ArChine Synchain POE 280

1,Hi-Temp Food Grade Chain Oils
2,Extremely low volatility resulting in less oil consumption
3,ArChine Synchain POE 280
Distributor Wanted
PRODUCT DESCRIPTION
ArChine Synchain POE 280 product is synthetic POE high temperature lubricants designed primarily
for high temperature equipment, such as oven chains and tenter frame ovens, as well as paint and
ceramic curing ovens. Satisfactory performance can also be expected in applications involving bearing
lubrication. Formulated from a quality synthetic basestock and additive system,
ArChine Synchain POE 280 provide the following performance benefits.
- Excellent high temperature oxidation and thermal stability for prolonged lubricant life
- Extremely low volatility resulting in less oil consumption
- Superior antiwear properties for reduced chain drag
- Does not form carbon residue as petroleum products do
- Maintain a clean operating environment for frame rails and chains
TYPICAL PROPERTIES
TYPICAL PROPERTIES
ArChine Synchain POE 280
Color(Fe-Co)≤,GB/T6540
1
Viscosity @40°C,cSt,GB/T265
280-290
Viscosity @100°C,cSt, GB/T265
33-39
Viscosity index(VI)≥,GB/T1995
180
Pour point °C, ≤,GB/T3535
-35
Flash point°C, ≥, GB/T267
260
Acid number mgKOH/g,≤,GB/T7304
0.5

Thread Locking Adhesive

Thread Locking Adhesive
242: Removeable
271: Strong strength
638: Vibration resistance
Thread Locking Adhesive

Thread Locking Adhesive is single component glue that prevents the position of threaded connections ( screws bolts) from shifting and loosening in their own due to vibrations.

Thread Locking Adhesive
creates a bond as air between the screw amd the socket is pushed out.

The exact time required for threadlocker to fully set depends on the ambient temperature and how sung the joint is between the bonded components.

Thread Locking Adhesive

Thread Locking Adhesive
242: Removeable
271: Strong strength
638: Vibration resistance
Thread Locking Adhesive

Thread Lock Adhesive is single component glue that prevents the position of threaded connections ( screws bolts) from shifting and loosening in their own due to vibrations.

Thread Lock Adhesive
creates a bond as air between the screw amd the socket is pushed out.

The exact time required for threadlocker to fully set depends on the ambient temperature and how sung the joint is between the bonded components.

Thread Locking Sealant

Thread Lock Sealant
242: Removeable
271: Strong strength
638: Vibration resistance
Thread Lock Sealant is single component glue that prevents the position of threaded connections ( screws bolts) from shifting and loosening in their own due to vibrations.

Threadlocker creates a bond as air between the screw amd the socket is pushed out.

The exact time required for threadlocker to fully set depends on the ambient temperature and how sung the joint is between the bonded components.