We OEM automotive,industry,Marine all lubricants oil, grease and spray .
Saturday, June 4, 2011
OEM Machine Lubricant Grease
OEM and ODM Silicone Grease, Calcium,Lithium ,Complex ,High Temp.Grease. We also prodive diffierent Packing 50-400ml
OEM Metal Working Lubricant
We OEM automotive,industry,Marine all lubricants oil, grease and spray .
OEM Molybdenum Disulfide Grease
OEM and ODM Silicone Grease, Calcium,Lithium ,Complex ,High Temp.Grease. We also prodive diffierent Packing 50-400ml
OEM Mutil-purpose Lubrcants Pen
8ml Lubricants Pen OEM and ODM
Lubricant Pen No-Mess Pen delivers the same trusted, multi-purpose product you know and love, with the precision of a pen-shaped applicator.
It is pocket-sized, fitting everywhere from glove boxes and desk drawers to backpacks and purses. The Lubricants Pen No-Mess Pen can lubricate & oil hinges, doors, and drawers, remove sticky labels, remove gum and crayon...it can do everything a regular can can do without messy overspray and with minimal odor!
Lubricant Pen No-Mess Pen delivers the same trusted, multi-purpose product you know and love, with the precision of a pen-shaped applicator.
It is pocket-sized, fitting everywhere from glove boxes and desk drawers to backpacks and purses. The Lubricants Pen No-Mess Pen can lubricate & oil hinges, doors, and drawers, remove sticky labels, remove gum and crayon...it can do everything a regular can can do without messy overspray and with minimal odor!
OEM Plastic Bearing Grease
OEM and ODM Silicone Grease, Calcium,Lithium ,Complex ,High Temp.Grease. We also prodive diffierent Packing 50-400ml
OEM SILICONE COMPOUND SERIES
FUKKOL SILICONE COMPOUND SERIES
Non-toxic and chemically inert
Operate at a wide range of temperature
FUKKOL SILICONE COMPOUND SERIES
Description
-FUKKOL Silicone compound series are formulated from specially selected silicone fluids and inert silica thickeners.
-FUKKOL silicone compounds were designed for a variety of applications where dielectric strength, water repellency and corrosive protection are important.
-FUKKOL Silicone compounds are resistant to oxidation and to a broad range of chemicals, while maintaining their characteristics over a wide range of temperature.
-Available in several consistency to meet specific requirements, application can be made in valve seats; o-rings; and vacuum and pressure systems .
They can also be used to lubricate, insulate electrical connectors and ignition components;
and as an assembly lubricant for rubber and plastic parts.
Application Lubricant for most rubber and plastic parts.
For O-rings snd valve sealing. Lubricant for electronics industry.
Benefits
Non-toxic and chemically inert.
Operate at a wide range of temperature.
Excellent lubricity. Excellent sealing properties. No effect to most rubber and plastic parts.
Non-toxic and chemically inert
Operate at a wide range of temperature
FUKKOL SILICONE COMPOUND SERIES
Description
-FUKKOL Silicone compound series are formulated from specially selected silicone fluids and inert silica thickeners.
-FUKKOL silicone compounds were designed for a variety of applications where dielectric strength, water repellency and corrosive protection are important.
-FUKKOL Silicone compounds are resistant to oxidation and to a broad range of chemicals, while maintaining their characteristics over a wide range of temperature.
-Available in several consistency to meet specific requirements, application can be made in valve seats; o-rings; and vacuum and pressure systems .
They can also be used to lubricate, insulate electrical connectors and ignition components;
and as an assembly lubricant for rubber and plastic parts.
Application Lubricant for most rubber and plastic parts.
For O-rings snd valve sealing. Lubricant for electronics industry.
Benefits
Non-toxic and chemically inert.
Operate at a wide range of temperature.
Excellent lubricity. Excellent sealing properties. No effect to most rubber and plastic parts.
A2101-11A PISTOLA AUTOMATICA PARA GASOLINA
A2101-11A PISTOLA AUTOMATICA PARA GASOLINA
A2101-11A PISTOLA AUTOMÁTICA PARA GASOLINA
Características:
1) Pequeña, recorte, ligero, fácil y conveniente funcionar
2) Las ofertas de toda la vida y servicio confiable
3) Materiales:
a) Cuerpo: aluminio
b) Juntas: Buna-N, Biton
c) Cuerpo de los sellos del vástago: viton sello de aceite de entubado / grafito con teflón
d) Principales vástago: acero inoxidable
4) las especificaciones de pedido:
a) A2101-11,
i) el tamaño de la entrada: BSP3 / 4 ", NPT3 / 4"
ii) de diámetro de salida: 15/16 "
iii) Caudal: 0-60L / m (15/16 ")
b) A2101-11AP:
i) el tamaño de la entrada: BSP3 / 4 ", NPT3 / 4"
ii) de diámetro de salida: 13/16 "
iii) Caudal: 0-45L / m (13/16 ")
5) Presión de funcionamiento: 0.18MPa
6) automático de inyectores para diesel, queroseno y todo tipo de gasolina
sevice
7) de fácil sustitución surtidor simplemente quita el tornillo
8) Pico kits disponibles
9) el cuerpo de aluminio de bajo perfil: peso ligero, fácil de manejar, ofrece
un aspecto atractivo, la imagen que mejora
10) de vacío de diseño: nuevo diseño de sellado
11) proceso de casting selectivo del cuerpo
12) Arena técnica de fundición o de fundición de alta presión
13) Técnica.
te la técnica de fundición a alta presión puede reducir diesel
formación de espuma y la electricidad estática
14) No. de la patente: ZL98247417.2
15) soporte de sujeción abierta está disponible para aplicaciones de servicio completo
16) el control con una sola mano mediante el ajuste fácil al flujo de clientes
conveniencia
17) aislante mano completa protege tanto a la boquilla y el vehículo, y aísla
usuario manos
18) Colores disponibles: carta de colores en el interior de la contraportada
19) protección contra salpicaduras selectiva
20) de fábrica 100% probada
21) Advertencias:
a) Uso de objetos extraños para mantener abierta
b) Las boquillas automáticas podría resultar en
c) La falta de cierre y de lesiones personales
22) Peso: 1.25kg/pc
Embalaje externo:
15pcs/ctn, 10pcs/ctn
Dimensiones del cartón: 55 x 34 x 42.5cm, 37.5 x 34 x 43 cm
N.W.: 18.75kg (15pcs), 12.25kg (10pcs)
G.W.: 22kg (15pcs), 15kg (10pcs)
A2101-11A PISTOLA AUTOMÁTICA PARA GASOLINA
Características:
1) Pequeña, recorte, ligero, fácil y conveniente funcionar
2) Las ofertas de toda la vida y servicio confiable
3) Materiales:
a) Cuerpo: aluminio
b) Juntas: Buna-N, Biton
c) Cuerpo de los sellos del vástago: viton sello de aceite de entubado / grafito con teflón
d) Principales vástago: acero inoxidable
4) las especificaciones de pedido:
a) A2101-11,
i) el tamaño de la entrada: BSP3 / 4 ", NPT3 / 4"
ii) de diámetro de salida: 15/16 "
iii) Caudal: 0-60L / m (15/16 ")
b) A2101-11AP:
i) el tamaño de la entrada: BSP3 / 4 ", NPT3 / 4"
ii) de diámetro de salida: 13/16 "
iii) Caudal: 0-45L / m (13/16 ")
5) Presión de funcionamiento: 0.18MPa
6) automático de inyectores para diesel, queroseno y todo tipo de gasolina
sevice
7) de fácil sustitución surtidor simplemente quita el tornillo
8) Pico kits disponibles
9) el cuerpo de aluminio de bajo perfil: peso ligero, fácil de manejar, ofrece
un aspecto atractivo, la imagen que mejora
10) de vacío de diseño: nuevo diseño de sellado
11) proceso de casting selectivo del cuerpo
12) Arena técnica de fundición o de fundición de alta presión
13) Técnica.
te la técnica de fundición a alta presión puede reducir diesel
formación de espuma y la electricidad estática
14) No. de la patente: ZL98247417.2
15) soporte de sujeción abierta está disponible para aplicaciones de servicio completo
16) el control con una sola mano mediante el ajuste fácil al flujo de clientes
conveniencia
17) aislante mano completa protege tanto a la boquilla y el vehículo, y aísla
usuario manos
18) Colores disponibles: carta de colores en el interior de la contraportada
19) protección contra salpicaduras selectiva
20) de fábrica 100% probada
21) Advertencias:
a) Uso de objetos extraños para mantener abierta
b) Las boquillas automáticas podría resultar en
c) La falta de cierre y de lesiones personales
22) Peso: 1.25kg/pc
Embalaje externo:
15pcs/ctn, 10pcs/ctn
Dimensiones del cartón: 55 x 34 x 42.5cm, 37.5 x 34 x 43 cm
N.W.: 18.75kg (15pcs), 12.25kg (10pcs)
G.W.: 22kg (15pcs), 15kg (10pcs)
OEM Silicone Grease
OEM and ODM Silicone Grease, Calcium,Lithium ,Complex ,High Temp.Grease. We also prodive diffierent Packing 50-400ml
OEM Silicone Mould Release Spray
We OEM automotive,industry,Marine all lubricants oil, grease and spray .
OEM Sticker Remover
OEM Sticker Remover
10 minutes of soaking
Prolong the soaking time
OEM Sticker Remover
10 minutes of soaking
Prolong the soaking time
Applications:
Fukkol Sticker Remover CPS is designed for removing problem of stickers. It leaves no sticky residue, harms no work-piece and affects no any work processing.
Directions:
Apply evenly the product onto the sticker. After 10 minutes of soaking, apply again and then wipe it with a cloth. Prolong the soaking time and apply more product if necessary.
Cautions:
1, Do not apply to food.
2, Long time skin contact may cause dry skin.
3, Use it in ventilated place.
4, Keep away from source of ignition.
Typical physical properties
Appearance
Colorless Transparent Liquid
CST at 40°C
1.0~2.0
Density g/cm³
0.77~0.81
Flash point °C
>60
10 minutes of soaking
Prolong the soaking time
OEM Sticker Remover
10 minutes of soaking
Prolong the soaking time
Applications:
Fukkol Sticker Remover CPS is designed for removing problem of stickers. It leaves no sticky residue, harms no work-piece and affects no any work processing.
Directions:
Apply evenly the product onto the sticker. After 10 minutes of soaking, apply again and then wipe it with a cloth. Prolong the soaking time and apply more product if necessary.
Cautions:
1, Do not apply to food.
2, Long time skin contact may cause dry skin.
3, Use it in ventilated place.
4, Keep away from source of ignition.
Typical physical properties
Appearance
Colorless Transparent Liquid
CST at 40°C
1.0~2.0
Density g/cm³
0.77~0.81
Flash point °C
>60
OEM Synthetic Base Grease
OEM and ODM Silicone Grease, Calcium,Lithium ,Complex ,High Temp.Grease. We also prodive diffierent Packing 50-400ml
OEM Top Gas Spray VS WE Top Gas Spray
OEM Top Gas Spray VS WE Top Gas Spray
We prodive kind of airsoft gas and cans with Green Gas,Top Gas,R134A,CO2.
OEM Top Gas Spray VS WE Top Gas Spray
We prodive kind of airsoft gas and cans with Green Gas,Top Gas,R134A,CO2.
We prodive kind of airsoft gas and cans with Green Gas,Top Gas,R134A,CO2.
OEM Top Gas Spray VS WE Top Gas Spray
We prodive kind of airsoft gas and cans with Green Gas,Top Gas,R134A,CO2.
AB Glue for Plastic
AB Glue for Plastic
Suitable for:
Synthetic rubber, Hard plastic,
Ceramics, Wood,
Metal, Leather
AB Glue for Plastic can be used to bond items made of wood, metal, fiberglass, ceramics, porcelain, rubber and most types of plastic and foam.
Prior to applying the resin to bonded surfaces, the surfaces should be thoroughly wiped clean of dirt, dried, and degreased.
Application instructions:
Cut off the tips of the two application nozzles with scissors or a knife.
Holding the syringe vertically with the application nozzles facing upwards; Holding the syringe over a clean, disposable, mixing tray to ensure that the compound does not drip onto unintended surfaces.
Squeeze an equal amount of resin and hardener onto the clean mixing surface.
Mix the compound thoroughly with a hard, clean, disposable item such as a coffee stir or chopstick.
Only mix the amount that will be used.
Apply the mixed compound to both surface that are to be bonded together.
You can adjust the bonded joint by applying adhesive thicker in 5 minutes. The joint will be hard and secure in one hour.
T
his resin becomes completely set after 24 hours following mixing and applying.
Suitable for:
Synthetic rubber, Hard plastic,
Ceramics, Wood,
Metal, Leather
AB Glue for Plastic can be used to bond items made of wood, metal, fiberglass, ceramics, porcelain, rubber and most types of plastic and foam.
Prior to applying the resin to bonded surfaces, the surfaces should be thoroughly wiped clean of dirt, dried, and degreased.
Application instructions:
Cut off the tips of the two application nozzles with scissors or a knife.
Holding the syringe vertically with the application nozzles facing upwards; Holding the syringe over a clean, disposable, mixing tray to ensure that the compound does not drip onto unintended surfaces.
Squeeze an equal amount of resin and hardener onto the clean mixing surface.
Mix the compound thoroughly with a hard, clean, disposable item such as a coffee stir or chopstick.
Only mix the amount that will be used.
Apply the mixed compound to both surface that are to be bonded together.
You can adjust the bonded joint by applying adhesive thicker in 5 minutes. The joint will be hard and secure in one hour.
T
his resin becomes completely set after 24 hours following mixing and applying.
OEM Top Gas Spray
OEM Top Gas Spray
We prodive kind of airsoft gas and cans with Green Gas,Top Gas,R134A,CO2.
OEM Top Gas Spray
We prodive kind of airsoft gas and cans with Green Gas,Top Gas,R134A,CO2.
We prodive kind of airsoft gas and cans with Green Gas,Top Gas,R134A,CO2.
OEM Top Gas Spray
We prodive kind of airsoft gas and cans with Green Gas,Top Gas,R134A,CO2.
OEM Top Gas VS WE Top Gas
OEM Top Gas VS WE Top Gas
We prodive kind of airsoft gas and cans with Green Gas,Top Gas,R134A,CO2.
OEM Top Gas VS WE Top Gas
We prodive kind of airsoft gas and cans with Green Gas,Top Gas,R134A,CO2.
We prodive kind of airsoft gas and cans with Green Gas,Top Gas,R134A,CO2.
OEM Top Gas VS WE Top Gas
We prodive kind of airsoft gas and cans with Green Gas,Top Gas,R134A,CO2.
OEM Top Gas for Toys
OEM Top Gas for Toys
We prodive kind of airsoft gas and cans with Green Gas,Top Gas,R134A,CO2.
OEM Top Gas for Toys
We prodive kind of airsoft gas and cans with Green Gas,Top Gas,R134A,CO2.
We prodive kind of airsoft gas and cans with Green Gas,Top Gas,R134A,CO2.
OEM Top Gas for Toys
We prodive kind of airsoft gas and cans with Green Gas,Top Gas,R134A,CO2.
OEM and ODM Adhesive tube paking
Lubricants,Grease,Polish Compound,Anti Rust,Adhesives,Wax,Aerosol,Spray OEM and ODM with 300 tube,bottle,tin,barrel packing.
OEM and ODM Aerosol tube paking
Lubricants,Grease,Polish Compound,Anti Rust,Adhesives,Wax,Aerosol,Spray OEM and ODM with 300 tube,bottle,tin,barrel packing.
OEM and ODM Airsoft Compare With WE Airsoft
OEM and ODM Airsoft Compare With WE Airsoft
We prodive kind of airsoft gas and cans with Green Gas,Top Gas,R134A,CO2.
OEM and ODM Airsoft Compare With WE Airsoft
We prodive kind of airsoft gas and cans with Green Gas,Top Gas,R134A,CO2.
We prodive kind of airsoft gas and cans with Green Gas,Top Gas,R134A,CO2.
OEM and ODM Airsoft Compare With WE Airsoft
We prodive kind of airsoft gas and cans with Green Gas,Top Gas,R134A,CO2.
OEM and ODM Airsoft Gas Compare With WE Airsoft Gas
OEM and ODM Airsoft Gas Compare With WE Airsoft Gas
We prodive kind of airsoft gas and cans with Green Gas,Top Gas,R134A,CO2.
OEM and ODM Airsoft Gas Compare With WE Airsoft Gas
We prodive kind of airsoft gas and cans with Green Gas,Top Gas,R134A,CO2.
We prodive kind of airsoft gas and cans with Green Gas,Top Gas,R134A,CO2.
OEM and ODM Airsoft Gas Compare With WE Airsoft Gas
We prodive kind of airsoft gas and cans with Green Gas,Top Gas,R134A,CO2.
OEM and ODM Airsoft Gas Green Color for Toys
OEM and ODM Airsoft Gas Green Color for Toys
We prodive kind of airsoft gas and cans with Green Gas,Top Gas,R134A,CO2.
OEM and ODM Airsoft Gas Green Color for Toys
We prodive kind of airsoft gas and cans with Green Gas,Top Gas,R134A,CO2.
We prodive kind of airsoft gas and cans with Green Gas,Top Gas,R134A,CO2.
OEM and ODM Airsoft Gas Green Color for Toys
We prodive kind of airsoft gas and cans with Green Gas,Top Gas,R134A,CO2.
Friday, June 3, 2011
OEM and ODM Airsoft Gas Green Color
OEM and ODM Airsoft Gas Green Color
We prodive kind of airsoft gas and cans with Green Gas,Top Gas,R134A,CO2.
OEM and ODM Airsoft Gas Green Color
We prodive kind of airsoft gas and cans with Green Gas,Top Gas,R134A,CO2.
We prodive kind of airsoft gas and cans with Green Gas,Top Gas,R134A,CO2.
OEM and ODM Airsoft Gas Green Color
We prodive kind of airsoft gas and cans with Green Gas,Top Gas,R134A,CO2.
OEM and ODM Airsoft Gas Spray for Toys
OEM and ODM Airsoft Gas Spray for Toys
We prodive kind of airsoft gas and cans with Green Gas,Top Gas,R134A,CO2.
OEM and ODM Airsoft Gas Spray for Toys
We prodive kind of airsoft gas and cans with Green Gas,Top Gas,R134A,CO2.
We prodive kind of airsoft gas and cans with Green Gas,Top Gas,R134A,CO2.
OEM and ODM Airsoft Gas Spray for Toys
We prodive kind of airsoft gas and cans with Green Gas,Top Gas,R134A,CO2.
AB Glue
AB Glue
Suitable for:
Synthetic rubber, Hard plastic,
Ceramics, Wood,
Metal, Leather
AB Glue can be used to bond items made of wood, metal, fiberglass, ceramics, porcelain, rubber and most types of plastic and foam.
Prior to applying the resin to bonded surfaces, the surfaces should be thoroughly wiped clean of dirt, dried, and degreased.
Application instructions:
Cut off the tips of the two application nozzles with scissors or a knife.
Holding the syringe vertically with the application nozzles facing upwards; Holding the syringe over a clean, disposable, mixing tray to ensure that the compound does not drip onto unintended surfaces.
Squeeze an equal amount of resin and hardener onto the clean mixing surface.
Mix the compound thoroughly with a hard, clean, disposable item such as a coffee stir or chopstick.
Only mix the amount that will be used.
Apply the mixed compound to both surface that are to be bonded together.
You can adjust the bonded joint by applying adhesive thicker in 5 minutes. The joint will be hard and secure in one hour.
T
his resin becomes completely set after 24 hours following mixing and applying.
Suitable for:
Synthetic rubber, Hard plastic,
Ceramics, Wood,
Metal, Leather
AB Glue can be used to bond items made of wood, metal, fiberglass, ceramics, porcelain, rubber and most types of plastic and foam.
Prior to applying the resin to bonded surfaces, the surfaces should be thoroughly wiped clean of dirt, dried, and degreased.
Application instructions:
Cut off the tips of the two application nozzles with scissors or a knife.
Holding the syringe vertically with the application nozzles facing upwards; Holding the syringe over a clean, disposable, mixing tray to ensure that the compound does not drip onto unintended surfaces.
Squeeze an equal amount of resin and hardener onto the clean mixing surface.
Mix the compound thoroughly with a hard, clean, disposable item such as a coffee stir or chopstick.
Only mix the amount that will be used.
Apply the mixed compound to both surface that are to be bonded together.
You can adjust the bonded joint by applying adhesive thicker in 5 minutes. The joint will be hard and secure in one hour.
T
his resin becomes completely set after 24 hours following mixing and applying.
OEM and ODM Airsoft Gas for Toys
OEM and ODM Airsoft Gas for Toys
We prodive kind of airsoft gas and cans with Green Gas,Top Gas,R134A,CO2.
OEM and ODM Airsoft Gas for Toys
We prodive kind of airsoft gas and cans with Green Gas,Top Gas,R134A,CO2.
We prodive kind of airsoft gas and cans with Green Gas,Top Gas,R134A,CO2.
OEM and ODM Airsoft Gas for Toys
We prodive kind of airsoft gas and cans with Green Gas,Top Gas,R134A,CO2.
OEM and ODM Airsoft Gas
OEM and ODM Airsoft Gas
We prodive kind of airsoft gas and cans with Green Gas,Top Gas,R134A,CO2.
OEM and ODM Airsoft Gas
We prodive kind of airsoft gas and cans with Green Gas,Top Gas,R134A,CO2.
We prodive kind of airsoft gas and cans with Green Gas,Top Gas,R134A,CO2.
OEM and ODM Airsoft Gas
We prodive kind of airsoft gas and cans with Green Gas,Top Gas,R134A,CO2.
OEM and ODM Airsoft Propane Gas
OEM and ODM Airsoft Propane Gas
We prodive kind of airsoft gas and cans with Green Gas,Top Gas,R134A,CO2.
OEM and ODM Airsoft Propane Gas
We prodive kind of airsoft gas and cans with Green Gas,Top Gas,R134A,CO2.
We prodive kind of airsoft gas and cans with Green Gas,Top Gas,R134A,CO2.
OEM and ODM Airsoft Propane Gas
We prodive kind of airsoft gas and cans with Green Gas,Top Gas,R134A,CO2.
OEM and ODM Airsoft Top Gas Spray
OEM and ODM Airsoft Top Gas Spray
We prodive kind of airsoft gas and cans with Green Gas,Top Gas,R134A,CO2.
OEM and ODM Airsoft Top Gas Spray
We prodive kind of airsoft gas and cans with Green Gas,Top Gas,R134A,CO2.
We prodive kind of airsoft gas and cans with Green Gas,Top Gas,R134A,CO2.
OEM and ODM Airsoft Top Gas Spray
We prodive kind of airsoft gas and cans with Green Gas,Top Gas,R134A,CO2.
OEM and ODM Airsoft Top Gas
OEM and ODM Airsoft Top Gas
We prodive kind of airsoft gas and cans with Green Gas,Top Gas,R134A,CO2.
OEM and ODM Airsoft Top Gas
We prodive kind of airsoft gas and cans with Green Gas,Top Gas,R134A,CO2.
We prodive kind of airsoft gas and cans with Green Gas,Top Gas,R134A,CO2.
OEM and ODM Airsoft Top Gas
We prodive kind of airsoft gas and cans with Green Gas,Top Gas,R134A,CO2.
OEM and ODM Airsoft
OEM and ODM Airsoft
We prodive kind of airsoft gas and cans with Green Gas,Top Gas,R134A,CO2.
OEM and ODM Airsoft
We prodive kind of airsoft gas and cans with Green Gas,Top Gas,R134A,CO2.
We prodive kind of airsoft gas and cans with Green Gas,Top Gas,R134A,CO2.
OEM and ODM Airsoft
We prodive kind of airsoft gas and cans with Green Gas,Top Gas,R134A,CO2.
OEM and ODM Grease bottle paking
Lubricants,Grease,Polish Compound,Anti Rust,Adhesives,Wax,Aerosol,Spray OEM and ODM with 300 tube,bottle,tin,barrel packing.
OEM and ODM Grease tube paking
Lubricants,Grease,Polish Compound,Anti Rust,Adhesives,Wax,Aerosol,Spray OEM and ODM with 300 tube,bottle,tin,barrel packing.
OEM and ODM Gree Gas Compare With WE Airsoft Gas
OEM and ODM Gree Gas Compare With WE Airsoft Gas
We prodive kind of airsoft gas and cans with Green Gas,Top Gas,R134A,CO2.
OEM and ODM Gree Gas Compare With WE Airsoft Gas
We prodive kind of airsoft gas and cans with Green Gas,Top Gas,R134A,CO2.
We prodive kind of airsoft gas and cans with Green Gas,Top Gas,R134A,CO2.
OEM and ODM Gree Gas Compare With WE Airsoft Gas
We prodive kind of airsoft gas and cans with Green Gas,Top Gas,R134A,CO2.
OEM and ODM Green Gas Compare With WE Airsoft Gas
OEM and ODM Green Gas Compare With WE Airsoft Gas
We prodive kind of airsoft gas and cans with Green Gas,Top Gas,R134A,CO2.
OEM and ODM Green Gas Compare With WE Airsoft Gas
We prodive kind of airsoft gas and cans with Green Gas,Top Gas,R134A,CO2.
We prodive kind of airsoft gas and cans with Green Gas,Top Gas,R134A,CO2.
OEM and ODM Green Gas Compare With WE Airsoft Gas
We prodive kind of airsoft gas and cans with Green Gas,Top Gas,R134A,CO2.
ABS MOULD RELEASE AGENT (PAINTABLE) FUKKOL
ABS MOULD RELEASE AGENT
PLASTICS AND RUBBER NON-STAINING RELEASE OF FOR MOST TYPES OF PLASTIC INJECTION MOULDING
FUKKOL MOULD RELEASE AGENT
(PAINTABLE)
http://www.fukkol-lube.com/asp-bin/EN/?page=1
Description
FUKKOL PAINTABLE is an aerosol applied release agent formulated to provide a quick, effective,
non - staining
release of plastics and rubber for most types of
plastic injection moulding
.
In addition, it is specially designed for products subject to subsequent processes such as printing,
painting, plating, hot stamping and bonding operations without the so- called “SILICONE PROBLEMS”.
Benefits
-Ultra fine spray gives controlled application with
complete coverage
-Improved finish and
reduced risk
of over application
-Reduces problems associated with marking and
transporting, highly economical
, efficient release,
only one pass required for many shots of ejection.
-Effective and
long lasting film
provides more numbers of release than most silicone formulations
-Low environmental impact,
contains no CFC propellant
-Excellent for
all thermal plastic,
especially ABS and PS
-Will not affect subsequent operations.
-Excellent lubricant for
sewing threads
,
table surface
,
needles and knives
.
Precautions
*
Pressure container, protect from sunlight, store at temperature below 50°C
*
Do not puncture or incinerate
*
Do not spray onto flames
*
Inflammable
Typical Data
Propellant LPG
Solvent N. Hexane
Base Fluid EP Powder
Working Temperatrue Range Up to 270°C
PLASTICS AND RUBBER NON-STAINING RELEASE OF FOR MOST TYPES OF PLASTIC INJECTION MOULDING
FUKKOL MOULD RELEASE AGENT
(PAINTABLE)
http://www.fukkol-lube.com/asp-bin/EN/?page=1
Description
FUKKOL PAINTABLE is an aerosol applied release agent formulated to provide a quick, effective,
non - staining
release of plastics and rubber for most types of
plastic injection moulding
.
In addition, it is specially designed for products subject to subsequent processes such as printing,
painting, plating, hot stamping and bonding operations without the so- called “SILICONE PROBLEMS”.
Benefits
-Ultra fine spray gives controlled application with
complete coverage
-Improved finish and
reduced risk
of over application
-Reduces problems associated with marking and
transporting, highly economical
, efficient release,
only one pass required for many shots of ejection.
-Effective and
long lasting film
provides more numbers of release than most silicone formulations
-Low environmental impact,
contains no CFC propellant
-Excellent for
all thermal plastic,
especially ABS and PS
-Will not affect subsequent operations.
-Excellent lubricant for
sewing threads
,
table surface
,
needles and knives
.
Precautions
*
Pressure container, protect from sunlight, store at temperature below 50°C
*
Do not puncture or incinerate
*
Do not spray onto flames
*
Inflammable
Typical Data
Propellant LPG
Solvent N. Hexane
Base Fluid EP Powder
Working Temperatrue Range Up to 270°C
OEM and ODM Green Gas
OEM and ODM Green Gas
We prodive kind of airsoft gas and cans with Green Gas,Top Gas,R134A,CO2.
OEM and ODM Green Gas
We prodive kind of airsoft gas and cans with Green Gas,Top Gas,R134A,CO2.
We prodive kind of airsoft gas and cans with Green Gas,Top Gas,R134A,CO2.
OEM and ODM Green Gas
We prodive kind of airsoft gas and cans with Green Gas,Top Gas,R134A,CO2.
OEM and ODM PE Plastic paking
Lubricants,Grease,Polish Compound,Anti Rust,Adhesives,Wax,Aerosol,Spray OEM and ODM with 300 tube,bottle,tin,barrel packing.
OEM and ODM PET tube paking
Lubricants,Grease,Polish Compound,Anti Rust,Adhesives,Wax,Aerosol,Spray OEM and ODM with 300 tube,bottle,tin,barrel packing.
OEM and ODM Plastic tube paking
Lubricants,Grease,Polish Compound,Anti Rust,Adhesives,Wax,Aerosol,Spray OEM and ODM with 300 tube,bottle,tin,barrel packing.
OEM and ODM Top Gas Green Color for Toys
OEM and ODM Top Gas Green Color for Toys
We prodive kind of airsoft gas and cans with Green Gas,Top Gas,R134A,CO2.
OEM and ODM Top Gas Green Color for Toys
We prodive kind of airsoft gas and cans with Green Gas,Top Gas,R134A,CO2.
We prodive kind of airsoft gas and cans with Green Gas,Top Gas,R134A,CO2.
OEM and ODM Top Gas Green Color for Toys
We prodive kind of airsoft gas and cans with Green Gas,Top Gas,R134A,CO2.
OEM and ODM Top Gas Compare With WE Top Gas
OEM and ODM Top Gas Compare With WE Top Gas
We prodive kind of airsoft gas and cans with Green Gas,Top Gas,R134A,CO2.
OEM and ODM Top Gas Compare With WE Top Gas
We prodive kind of airsoft gas and cans with Green Gas,Top Gas,R134A,CO2.
We prodive kind of airsoft gas and cans with Green Gas,Top Gas,R134A,CO2.
OEM and ODM Top Gas Compare With WE Top Gas
We prodive kind of airsoft gas and cans with Green Gas,Top Gas,R134A,CO2.
OEM and ODM Top Gas Green Color
OEM and ODM Top Gas Green Color
We prodive kind of airsoft gas and cans with Green Gas,Top Gas,R134A,CO2.
OEM and ODM Top Gas Green Color
We prodive kind of airsoft gas and cans with Green Gas,Top Gas,R134A,CO2.
We prodive kind of airsoft gas and cans with Green Gas,Top Gas,R134A,CO2.
OEM and ODM Top Gas Green Color
We prodive kind of airsoft gas and cans with Green Gas,Top Gas,R134A,CO2.
OEM and ODM Top Gas Spray Green Color for Toys
OEM and ODM Top Gas Spray Green Color for Toys
We prodive kind of airsoft gas and cans with Green Gas,Top Gas,R134A,CO2.
OEM and ODM Top Gas Spray Green Color for Toys
We prodive kind of airsoft gas and cans with Green Gas,Top Gas,R134A,CO2.
We prodive kind of airsoft gas and cans with Green Gas,Top Gas,R134A,CO2.
OEM and ODM Top Gas Spray Green Color for Toys
We prodive kind of airsoft gas and cans with Green Gas,Top Gas,R134A,CO2.
OEM and ODM Top Gas Spray
OEM and ODM Top Gas Spray
We prodive kind of airsoft gas and cans with Green Gas,Top Gas,R134A,CO2.
OEM and ODM Top Gas Spray
We prodive kind of airsoft gas and cans with Green Gas,Top Gas,R134A,CO2.
We prodive kind of airsoft gas and cans with Green Gas,Top Gas,R134A,CO2.
OEM and ODM Top Gas Spray
We prodive kind of airsoft gas and cans with Green Gas,Top Gas,R134A,CO2.
OEM and ODM Top Gas for Toys
OEM and ODM Top Gas for Toys
We prodive kind of airsoft gas and cans with Green Gas,Top Gas,R134A,CO2.
OEM and ODM Top Gas for Toys
We prodive kind of airsoft gas and cans with Green Gas,Top Gas,R134A,CO2.
We prodive kind of airsoft gas and cans with Green Gas,Top Gas,R134A,CO2.
OEM and ODM Top Gas for Toys
We prodive kind of airsoft gas and cans with Green Gas,Top Gas,R134A,CO2.
ABS MOULD RELEASE AGENT (NON-PAINTABLE) FUKKOL
ABS MOULD RELEASER
no CFC propellant
GOOD thermal stability
Unique Effective and long lasting film
FUKKOL MOULD RELEASE AGENT (NON-PAINTABLE)
http://www.fukkol-lube.com/asp-bin/EN/?page=1
Description
FUKKOL MOULD RELEASE AGENT(NON - PAINTBLE) is an aerosol applied release agent comtaining
a highly effective silicone oil,
specially formulated to provide a quick, effective,
non-staining release of plastics and rubber for most types of plastic injection moulding.
Benefits
-Ultra fine spray gives controlled application with complete coverage
-
Improved finish and reduced risk of over application
-Reduces problems associated with marking and transfer, highly economical, efficient release,
only one pass required for many shots of ejection
-
Effective and long lasting film
provides
more numbers of release
than most silicone formulations
-Low environmental impact, contains no CFC propellant
Non staining property makes it an excellent lubricant for textile and paper industry.
Precautions
*Pressurised container, protect from sunlight, store at temperature below 50°C
*Do not puncture or incinerate
*Do not spray on to naked flames
*Inflammable
Typical Date
Propellant LPG
Solvent Chlorinated Solvent
Active ingredient Silicone Oil
no CFC propellant
GOOD thermal stability
Unique Effective and long lasting film
FUKKOL MOULD RELEASE AGENT (NON-PAINTABLE)
http://www.fukkol-lube.com/asp-bin/EN/?page=1
Description
FUKKOL MOULD RELEASE AGENT(NON - PAINTBLE) is an aerosol applied release agent comtaining
a highly effective silicone oil,
specially formulated to provide a quick, effective,
non-staining release of plastics and rubber for most types of plastic injection moulding.
Benefits
-Ultra fine spray gives controlled application with complete coverage
-
Improved finish and reduced risk of over application
-Reduces problems associated with marking and transfer, highly economical, efficient release,
only one pass required for many shots of ejection
-
Effective and long lasting film
provides
more numbers of release
than most silicone formulations
-Low environmental impact, contains no CFC propellant
Non staining property makes it an excellent lubricant for textile and paper industry.
Precautions
*Pressurised container, protect from sunlight, store at temperature below 50°C
*Do not puncture or incinerate
*Do not spray on to naked flames
*Inflammable
Typical Date
Propellant LPG
Solvent Chlorinated Solvent
Active ingredient Silicone Oil
OEM and ODM Top Gas
OEM and ODM Top Gas
We prodive kind of airsoft gas and cans with Green Gas,Top Gas,R134A,CO2.
OEM and ODM Top Gas
We prodive kind of airsoft gas and cans with Green Gas,Top Gas,R134A,CO2.
We prodive kind of airsoft gas and cans with Green Gas,Top Gas,R134A,CO2.
OEM and ODM Top Gas
We prodive kind of airsoft gas and cans with Green Gas,Top Gas,R134A,CO2.
OEM and ODM Wax tube paking
Lubricants,Grease,Polish Compound,Anti Rust,Adhesives,Wax,Aerosol,Spray OEM and ODM with 300 tube,bottle,tin,barrel packing.
OEM and ODM anti-rust lubricant paking
Lubricants,Grease,Polish Compound,Anti Rust,Adhesives,Wax,Aerosol,Spray OEM and ODM with 300 tube,bottle,tin,barrel packing.
Thursday, June 2, 2011
OEM and ODM chemical products
Lubricants,Grease,Polish Compound,Anti Rust,Adhesives,Wax,Aerosol,Spray OEM and ODM with 300 tube,bottle,tin,barrel packing.
OEM and ODM lubricant bottle paking
Lubricants,Grease,Polish Compound,Anti Rust,Adhesives,Wax,Aerosol,Spray OEM and ODM with 300 tube,bottle,tin,barrel packing.
OIL TREATMENT
OIL TREATMENT
1) Formula USA
2) SONCAP/SASO/MSDS/CE/ISO...
3) M.O.Q. 5000pcs
4) Delivery: 15 days
OIL TREATMENT
1.Reduces friction,extends engine life
2.Helps stop oil foaming for better lubrication
3.Protects against motor oil breakdown
1) Formula USA
2) SONCAP/SASO/MSDS/CE/ISO...
3) M.O.Q. 5000pcs
4) Delivery: 15 days
OIL TREATMENT
1.Reduces friction,extends engine life
2.Helps stop oil foaming for better lubrication
3.Protects against motor oil breakdown
OIL TREATMENT
OIL TREATMENT
1) Formula USA
2) SONCAP/SASO/MSDS/CE/ISO...
3) M.O.Q. 5000pcs
4) Delivery: 15 days
OIL TREATMENT
1.Reduces friction,extends engine life
2.Helps stop oil foaming for better lubrication
3.Protects against motor oil breakdown
1) Formula USA
2) SONCAP/SASO/MSDS/CE/ISO...
3) M.O.Q. 5000pcs
4) Delivery: 15 days
OIL TREATMENT
1.Reduces friction,extends engine life
2.Helps stop oil foaming for better lubrication
3.Protects against motor oil breakdown
OILINESS AGENT
USED TO PREPARE VARIOUS KINDS OF HYDRAULIC OIL, GEAR OIL, BEARING OIL, ANTIRUST OIL WHICH CAN ANTI-WEAR, LUBRICITY AND ANTIRUST.
IT IS USED TO PREPARE VARIOUS KINDS OF HYDRAULIC OIL, GEAR OIL, BEARING OIL, ANTIRUST OIL, WHICH HAS FUNCTIONS OF ANTI-WEAR, LUBRICITY AND ANTIRUST.
IT IS USED TO PREPARE VARIOUS KINDS OF HYDRAULIC OIL, GEAR OIL, BEARING OIL, ANTIRUST OIL, WHICH HAS FUNCTIONS OF ANTI-WEAR, LUBRICITY AND ANTIRUST.
OMC2 Excellent / Lubricant
OMC2 Excellent / Lubricant
Reducing the friction,Presents longer heat-resistance.
Applicable for gear, chain, sliding parts.
OMC2 Excellent / Lubricant
Protects the machine by reducing the friction of the components.
Prevents noise or sticking of parts.
Thin film presents longer heat-resistance.
Elevate the working temperature of the components (-30~ 650°C).
Enhance the lubricating and friction-resistant effect over 7 times.
Applicable for the parts that need lubrication, such as high-temperature bearing sliding block, gear, chain, sliding parts, chain wheel, and punching machine, etc.
Reducing the friction,Presents longer heat-resistance.
Applicable for gear, chain, sliding parts.
OMC2 Excellent / Lubricant
Protects the machine by reducing the friction of the components.
Prevents noise or sticking of parts.
Thin film presents longer heat-resistance.
Elevate the working temperature of the components (-30~ 650°C).
Enhance the lubricating and friction-resistant effect over 7 times.
Applicable for the parts that need lubrication, such as high-temperature bearing sliding block, gear, chain, sliding parts, chain wheel, and punching machine, etc.
OMC2 Racing Chain Lube
OMC2 Racing Chain Lube
Effectively protects the chain from rust caused by rains, and lubrication lasts up to 600km.
OMC2 Racing Chain Lube
Special lubricant that does not easily attract grit and grime. It cleans and lubricates the chain, prevents it from rust, wear and resists water wash-off.
The special anti-attrition formula can form a high lubricant film on the metal surface. Heat resistance; low friction leads to long protection.
Effectively protects the chain to reduce friction resistance, and makes paddling smoother and easier.
High permeability to lubricate between thin gaps.
Effectively protects the chain from rust caused by rains, and lubrication lasts up to 600km.
Effectively protects the chain from rust caused by rains, and lubrication lasts up to 600km.
OMC2 Racing Chain Lube
Special lubricant that does not easily attract grit and grime. It cleans and lubricates the chain, prevents it from rust, wear and resists water wash-off.
The special anti-attrition formula can form a high lubricant film on the metal surface. Heat resistance; low friction leads to long protection.
Effectively protects the chain to reduce friction resistance, and makes paddling smoother and easier.
High permeability to lubricate between thin gaps.
Effectively protects the chain from rust caused by rains, and lubrication lasts up to 600km.
ABS MOULD RELEASE AGENT FUKKOL
ABS MOULD RELEASE AGENT FUKKOL
NON-STAINING RELEASE OF PLASTICS AND RUBBER FOR MOST TYPES OF PLASTIC INJECTION MOULDING
FUKKOL MOULD RELEASE AGENT
(NON-PAINTABLE)
Description:
FUKKOL MOULD RELEASE AGENT(NON- PAINTABLE)
is an aerosol applied release agent comtaining a highly effective silicone oil, specially formulated to provide a quick, effective,
non-staining
release of plastics and rubber for most types of plastic injection moulding.
Its specially designed nozzle provides a very fine spray pattern which allows the quantity applied to be fully controlled and the most complicated dies to be completely covered.
Benefits:
-
Ultra fine spray
gives controlled application with complete coverage
-Improved finish and reduced risk of over application
-Reduces problems associated with marking and transfering, highly economical, efficient release, only one pass required for many shots of ejection
-Effective and long lasting film provides more numbers of release than most silicone formulations
-Low environmental impact, contains no CFC propellant
Non staining property makes it an excellent lubricant for textile and paper industry.
Precautions:
Pressurised container, protect from sunlight, store at temperature below 50°C
Do not puncture or incinerate
Do not spray on to naked flame
Flammable.
Typical Data
Active Ingredient
Silicone Oil
Solvent
Hexyl Hydride
Propellant
LPG
NON-STAINING RELEASE OF PLASTICS AND RUBBER FOR MOST TYPES OF PLASTIC INJECTION MOULDING
FUKKOL MOULD RELEASE AGENT
(NON-PAINTABLE)
Description:
FUKKOL MOULD RELEASE AGENT(NON- PAINTABLE)
is an aerosol applied release agent comtaining a highly effective silicone oil, specially formulated to provide a quick, effective,
non-staining
release of plastics and rubber for most types of plastic injection moulding.
Its specially designed nozzle provides a very fine spray pattern which allows the quantity applied to be fully controlled and the most complicated dies to be completely covered.
Benefits:
-
Ultra fine spray
gives controlled application with complete coverage
-Improved finish and reduced risk of over application
-Reduces problems associated with marking and transfering, highly economical, efficient release, only one pass required for many shots of ejection
-Effective and long lasting film provides more numbers of release than most silicone formulations
-Low environmental impact, contains no CFC propellant
Non staining property makes it an excellent lubricant for textile and paper industry.
Precautions:
Pressurised container, protect from sunlight, store at temperature below 50°C
Do not puncture or incinerate
Do not spray on to naked flame
Flammable.
Typical Data
Active Ingredient
Silicone Oil
Solvent
Hexyl Hydride
Propellant
LPG
OPE WAX,Oxidized Polyethylene Wax
polyethylene wax lubricant
1.High-melting-point
2.Low viscosity
3.Good hardness
4.Strong tension
polyethylene wax lubricant
Name
special PE wax
Melting point(°C)
96.5±2
110±2
Form
Solid
Color
White
Shape
Slab/Particles
Refinement
Fully refined
Oil content
0
Mini order
1 tons
1.It has certified by SGS.
2.In processing kinds of holt-melt adhesive.
3.Stable.
Application:
1. Masterbatch coloring agent.
2.It is lubricant for processing PVC pipe processing which improving
the plastic's hardness, surface smoothing, and high plasticizing degree.
3. It can be used for dispersant of printing ink and paint to make the
presswork glossy and tridimensional.
4. It widely used in plastic chemical area.
1.High-melting-point
2.Low viscosity
3.Good hardness
4.Strong tension
polyethylene wax lubricant
Name
special PE wax
Melting point(°C)
96.5±2
110±2
Form
Solid
Color
White
Shape
Slab/Particles
Refinement
Fully refined
Oil content
0
Mini order
1 tons
1.It has certified by SGS.
2.In processing kinds of holt-melt adhesive.
3.Stable.
Application:
1. Masterbatch coloring agent.
2.It is lubricant for processing PVC pipe processing which improving
the plastic's hardness, surface smoothing, and high plasticizing degree.
3. It can be used for dispersant of printing ink and paint to make the
presswork glossy and tridimensional.
4. It widely used in plastic chemical area.
OPE WAX,good quality Polyethylene Wax
polyethylene wax lubricant
1.High-melting-point
2.Low viscosity
3.Good hardness
4.Strong tension
polyethylene wax lubricant
Name
special PE wax
Melting point(°C)
96.5±2
110±2
Form
Solid
Color
White
Shape
Slab/Particles
Refinement
Fully refined
Oil content
0
Mini order
1 tons
1.It has certified by SGS.
2.In processing kinds of holt-melt adhesive.
3.Stable.
Application:
1. Masterbatch coloring agent.
2.It is lubricant for processing PVC pipe processing which improving
the plastic's hardness, surface smoothing, and high plasticizing degree.
3. It can be used for dispersant of printing ink and paint to make the
presswork glossy and tridimensional.
4. It widely used in plastic chemical area.
1.High-melting-point
2.Low viscosity
3.Good hardness
4.Strong tension
polyethylene wax lubricant
Name
special PE wax
Melting point(°C)
96.5±2
110±2
Form
Solid
Color
White
Shape
Slab/Particles
Refinement
Fully refined
Oil content
0
Mini order
1 tons
1.It has certified by SGS.
2.In processing kinds of holt-melt adhesive.
3.Stable.
Application:
1. Masterbatch coloring agent.
2.It is lubricant for processing PVC pipe processing which improving
the plastic's hardness, surface smoothing, and high plasticizing degree.
3. It can be used for dispersant of printing ink and paint to make the
presswork glossy and tridimensional.
4. It widely used in plastic chemical area.
ORS used car oil purifier/oil recycling machine/oil filter plant
If you want to recovery used car oil, engine oil to new oil and resell it to market, this machine is what you need. contact me .
1.
Application:
ORS series waste engine oil recycling and purification plant can not only remove the carbon particles, deep oxide, etc., but also can filter off the harmful matters such as colloid, bitumen. After treated by the plant, the color of the treated oils can be recovered, similar with new one; the quality indexes are improved also, so as to resume the performance of engine oil, keep the engine being lubricated, guarantee lubricating system of engine to work properly and prolong service life of engine oil. The series plant are special for recycling all kinds of engine/motor oil used in ships, cars, trucks, buses and other vehicles.
2. Features:
1: Two main filtering systems in the ORS which can ensure the plant works continuously by batch.
2: Environmentally friendly, no acid used during operation.
3: The filters in filtering systems are made of stainless steel. It can extend lifetime of filtering systems. Traditional filter is made of fabric or paper which needs to be replaced frequently. So using stainless steel filter can largely decrease operation cost for customers.
4: Exhaust gas removing systems can remove exhaust gas quickly and efficiently and make operation more environmentally friendly.
5: Heat preservation material which can keep heating high efficient. Reducing operation cost.
6: Design according to different customers needs including Turnkey Project.
7: Purify blended oils.
8: Low maintenance and replacement.
9: Low operation cost.
10: High regeneration rate.
11: Automatic reverse-washing system will extend the lifetime of filters and improve the performance of the filters.
12: High performance security system including pressure protection device and automatic temperature controller makes purifier operate safely.
13: Small size, light weight, low noise.
Please see some oil picture before treatment and after treatment by this machine
1.
Application:
ORS series waste engine oil recycling and purification plant can not only remove the carbon particles, deep oxide, etc., but also can filter off the harmful matters such as colloid, bitumen. After treated by the plant, the color of the treated oils can be recovered, similar with new one; the quality indexes are improved also, so as to resume the performance of engine oil, keep the engine being lubricated, guarantee lubricating system of engine to work properly and prolong service life of engine oil. The series plant are special for recycling all kinds of engine/motor oil used in ships, cars, trucks, buses and other vehicles.
2. Features:
1: Two main filtering systems in the ORS which can ensure the plant works continuously by batch.
2: Environmentally friendly, no acid used during operation.
3: The filters in filtering systems are made of stainless steel. It can extend lifetime of filtering systems. Traditional filter is made of fabric or paper which needs to be replaced frequently. So using stainless steel filter can largely decrease operation cost for customers.
4: Exhaust gas removing systems can remove exhaust gas quickly and efficiently and make operation more environmentally friendly.
5: Heat preservation material which can keep heating high efficient. Reducing operation cost.
6: Design according to different customers needs including Turnkey Project.
7: Purify blended oils.
8: Low maintenance and replacement.
9: Low operation cost.
10: High regeneration rate.
11: Automatic reverse-washing system will extend the lifetime of filters and improve the performance of the filters.
12: High performance security system including pressure protection device and automatic temperature controller makes purifier operate safely.
13: Small size, light weight, low noise.
Please see some oil picture before treatment and after treatment by this machine
ORS used car oil purifier/oil recycling machine/oil filter plant
If you want to recovery used car oil, engine oil to new oil and resell it to market, this machine is what you need. contact me .
1.
Application:
ORS series waste engine oil recycling and purification plant can not only remove the carbon particles, deep oxide, etc., but also can filter off the harmful matters such as colloid, bitumen. After treated by the plant, the color of the treated oils can be recovered, similar with new one; the quality indexes are improved also, so as to resume the performance of engine oil, keep the engine being lubricated, guarantee lubricating system of engine to work properly and prolong service life of engine oil. The series plant are special for recycling all kinds of engine/motor oil used in ships, cars, trucks, buses and other vehicles.
2. Features:
1: Two main filtering systems in the ORS which can ensure the plant works continuously by batch.
2: Environmentally friendly, no acid used during operation.
3: The filters in filtering systems are made of stainless steel. It can extend lifetime of filtering systems. Traditional filter is made of fabric or paper which needs to be replaced frequently. So using stainless steel filter can largely decrease operation cost for customers.
4: Exhaust gas removing systems can remove exhaust gas quickly and efficiently and make operation more environmentally friendly.
5: Heat preservation material which can keep heating high efficient. Reducing operation cost.
6: Design according to different customers needs including Turnkey Project.
7: Purify blended oils.
8: Low maintenance and replacement.
9: Low operation cost.
10: High regeneration rate.
11: Automatic reverse-washing system will extend the lifetime of filters and improve the performance of the filters.
12: High performance security system including pressure protection device and automatic temperature controller makes purifier operate safely.
13: Small size, light weight, low noise.
Please see some oil picture before treatment and after treatment by this machine
1.
Application:
ORS series waste engine oil recycling and purification plant can not only remove the carbon particles, deep oxide, etc., but also can filter off the harmful matters such as colloid, bitumen. After treated by the plant, the color of the treated oils can be recovered, similar with new one; the quality indexes are improved also, so as to resume the performance of engine oil, keep the engine being lubricated, guarantee lubricating system of engine to work properly and prolong service life of engine oil. The series plant are special for recycling all kinds of engine/motor oil used in ships, cars, trucks, buses and other vehicles.
2. Features:
1: Two main filtering systems in the ORS which can ensure the plant works continuously by batch.
2: Environmentally friendly, no acid used during operation.
3: The filters in filtering systems are made of stainless steel. It can extend lifetime of filtering systems. Traditional filter is made of fabric or paper which needs to be replaced frequently. So using stainless steel filter can largely decrease operation cost for customers.
4: Exhaust gas removing systems can remove exhaust gas quickly and efficiently and make operation more environmentally friendly.
5: Heat preservation material which can keep heating high efficient. Reducing operation cost.
6: Design according to different customers needs including Turnkey Project.
7: Purify blended oils.
8: Low maintenance and replacement.
9: Low operation cost.
10: High regeneration rate.
11: Automatic reverse-washing system will extend the lifetime of filters and improve the performance of the filters.
12: High performance security system including pressure protection device and automatic temperature controller makes purifier operate safely.
13: Small size, light weight, low noise.
Please see some oil picture before treatment and after treatment by this machine
ORS used car oil purifier/oil recycling machine/oil filter plant
If you want to recovery used car oil, engine oil to new oil and resell it to market, this machine is what you need. contact me .
1.
Application:
ORS series waste engine oil recycling and purification plant can not only remove the carbon particles, deep oxide, etc., but also can filter off the harmful matters such as colloid, bitumen. After treated by the plant, the color of the treated oils can be recovered, similar with new one; the quality indexes are improved also, so as to resume the performance of engine oil, keep the engine being lubricated, guarantee lubricating system of engine to work properly and prolong service life of engine oil. The series plant are special for recycling all kinds of engine/motor oil used in ships, cars, trucks, buses and other vehicles.
2. Features:
1: Two main filtering systems in the ORS which can ensure the plant works continuously by batch.
2: Environmentally friendly, no acid used during operation.
3: The filters in filtering systems are made of stainless steel. It can extend lifetime of filtering systems. Traditional filter is made of fabric or paper which needs to be replaced frequently. So using stainless steel filter can largely decrease operation cost for customers.
4: Exhaust gas removing systems can remove exhaust gas quickly and efficiently and make operation more environmentally friendly.
5: Heat preservation material which can keep heating high efficient. Reducing operation cost.
6: Design according to different customers needs including Turnkey Project.
7: Purify blended oils.
8: Low maintenance and replacement.
9: Low operation cost.
10: High regeneration rate.
11: Automatic reverse-washing system will extend the lifetime of filters and improve the performance of the filters.
12: High performance security system including pressure protection device and automatic temperature controller makes purifier operate safely.
13: Small size, light weight, low noise.
Please see some oil picture before treatment and after treatment by this machine
1.
Application:
ORS series waste engine oil recycling and purification plant can not only remove the carbon particles, deep oxide, etc., but also can filter off the harmful matters such as colloid, bitumen. After treated by the plant, the color of the treated oils can be recovered, similar with new one; the quality indexes are improved also, so as to resume the performance of engine oil, keep the engine being lubricated, guarantee lubricating system of engine to work properly and prolong service life of engine oil. The series plant are special for recycling all kinds of engine/motor oil used in ships, cars, trucks, buses and other vehicles.
2. Features:
1: Two main filtering systems in the ORS which can ensure the plant works continuously by batch.
2: Environmentally friendly, no acid used during operation.
3: The filters in filtering systems are made of stainless steel. It can extend lifetime of filtering systems. Traditional filter is made of fabric or paper which needs to be replaced frequently. So using stainless steel filter can largely decrease operation cost for customers.
4: Exhaust gas removing systems can remove exhaust gas quickly and efficiently and make operation more environmentally friendly.
5: Heat preservation material which can keep heating high efficient. Reducing operation cost.
6: Design according to different customers needs including Turnkey Project.
7: Purify blended oils.
8: Low maintenance and replacement.
9: Low operation cost.
10: High regeneration rate.
11: Automatic reverse-washing system will extend the lifetime of filters and improve the performance of the filters.
12: High performance security system including pressure protection device and automatic temperature controller makes purifier operate safely.
13: Small size, light weight, low noise.
Please see some oil picture before treatment and after treatment by this machine
ORS used car oil purifier/oil recycling machine/oil filter plant
If you want to recovery used car oil, engine oil to new oil and resell it to market, this machine is what you need. contact me .
1.
Application:
ORS series waste engine oil recycling and purification plant can not only remove the carbon particles, deep oxide, etc., but also can filter off the harmful matters such as colloid, bitumen. After treated by the plant, the color of the treated oils can be recovered, similar with new one; the quality indexes are improved also, so as to resume the performance of engine oil, keep the engine being lubricated, guarantee lubricating system of engine to work properly and prolong service life of engine oil. The series plant are special for recycling all kinds of engine/motor oil used in ships, cars, trucks, buses and other vehicles.
2. Features:
1: Two main filtering systems in the ORS which can ensure the plant works continuously by batch.
2: Environmentally friendly, no acid used during operation.
3: The filters in filtering systems are made of stainless steel. It can extend lifetime of filtering systems. Traditional filter is made of fabric or paper which needs to be replaced frequently. So using stainless steel filter can largely decrease operation cost for customers.
4: Exhaust gas removing systems can remove exhaust gas quickly and efficiently and make operation more environmentally friendly.
5: Heat preservation material which can keep heating high efficient. Reducing operation cost.
6: Design according to different customers needs including Turnkey Project.
7: Purify blended oils.
8: Low maintenance and replacement.
9: Low operation cost.
10: High regeneration rate.
11: Automatic reverse-washing system will extend the lifetime of filters and improve the performance of the filters.
12: High performance security system including pressure protection device and automatic temperature controller makes purifier operate safely.
13: Small size, light weight, low noise.
Please see some oil picture before treatment and after treatment by this machine
1.
Application:
ORS series waste engine oil recycling and purification plant can not only remove the carbon particles, deep oxide, etc., but also can filter off the harmful matters such as colloid, bitumen. After treated by the plant, the color of the treated oils can be recovered, similar with new one; the quality indexes are improved also, so as to resume the performance of engine oil, keep the engine being lubricated, guarantee lubricating system of engine to work properly and prolong service life of engine oil. The series plant are special for recycling all kinds of engine/motor oil used in ships, cars, trucks, buses and other vehicles.
2. Features:
1: Two main filtering systems in the ORS which can ensure the plant works continuously by batch.
2: Environmentally friendly, no acid used during operation.
3: The filters in filtering systems are made of stainless steel. It can extend lifetime of filtering systems. Traditional filter is made of fabric or paper which needs to be replaced frequently. So using stainless steel filter can largely decrease operation cost for customers.
4: Exhaust gas removing systems can remove exhaust gas quickly and efficiently and make operation more environmentally friendly.
5: Heat preservation material which can keep heating high efficient. Reducing operation cost.
6: Design according to different customers needs including Turnkey Project.
7: Purify blended oils.
8: Low maintenance and replacement.
9: Low operation cost.
10: High regeneration rate.
11: Automatic reverse-washing system will extend the lifetime of filters and improve the performance of the filters.
12: High performance security system including pressure protection device and automatic temperature controller makes purifier operate safely.
13: Small size, light weight, low noise.
Please see some oil picture before treatment and after treatment by this machine
ORS used car oil purifier/oil recycling machine/oil filter plant
If you want to recovery used car oil, engine oil to new oil and resell it to market, this machine is what you need. contact me .
1.
Application:
ORS series waste engine oil recycling and purification plant can not only remove the carbon particles, deep oxide, etc., but also can filter off the harmful matters such as colloid, bitumen. After treated by the plant, the color of the treated oils can be recovered, similar with new one; the quality indexes are improved also, so as to resume the performance of engine oil, keep the engine being lubricated, guarantee lubricating system of engine to work properly and prolong service life of engine oil. The series plant are special for recycling all kinds of engine/motor oil used in ships, cars, trucks, buses and other vehicles.
2. Features:
1: Two main filtering systems in the ORS which can ensure the plant works continuously by batch.
2: Environmentally friendly, no acid used during operation.
3: The filters in filtering systems are made of stainless steel. It can extend lifetime of filtering systems. Traditional filter is made of fabric or paper which needs to be replaced frequently. So using stainless steel filter can largely decrease operation cost for customers.
4: Exhaust gas removing systems can remove exhaust gas quickly and efficiently and make operation more environmentally friendly.
5: Heat preservation material which can keep heating high efficient. Reducing operation cost.
6: Design according to different customers needs including Turnkey Project.
7: Purify blended oils.
8: Low maintenance and replacement.
9: Low operation cost.
10: High regeneration rate.
11: Automatic reverse-washing system will extend the lifetime of filters and improve the performance of the filters.
12: High performance security system including pressure protection device and automatic temperature controller makes purifier operate safely.
13: Small size, light weight, low noise.
Please see some oil picture before treatment and after treatment by this machine
1.
Application:
ORS series waste engine oil recycling and purification plant can not only remove the carbon particles, deep oxide, etc., but also can filter off the harmful matters such as colloid, bitumen. After treated by the plant, the color of the treated oils can be recovered, similar with new one; the quality indexes are improved also, so as to resume the performance of engine oil, keep the engine being lubricated, guarantee lubricating system of engine to work properly and prolong service life of engine oil. The series plant are special for recycling all kinds of engine/motor oil used in ships, cars, trucks, buses and other vehicles.
2. Features:
1: Two main filtering systems in the ORS which can ensure the plant works continuously by batch.
2: Environmentally friendly, no acid used during operation.
3: The filters in filtering systems are made of stainless steel. It can extend lifetime of filtering systems. Traditional filter is made of fabric or paper which needs to be replaced frequently. So using stainless steel filter can largely decrease operation cost for customers.
4: Exhaust gas removing systems can remove exhaust gas quickly and efficiently and make operation more environmentally friendly.
5: Heat preservation material which can keep heating high efficient. Reducing operation cost.
6: Design according to different customers needs including Turnkey Project.
7: Purify blended oils.
8: Low maintenance and replacement.
9: Low operation cost.
10: High regeneration rate.
11: Automatic reverse-washing system will extend the lifetime of filters and improve the performance of the filters.
12: High performance security system including pressure protection device and automatic temperature controller makes purifier operate safely.
13: Small size, light weight, low noise.
Please see some oil picture before treatment and after treatment by this machine
ORS used car oil purifier/oil recycling machine/oil filter plant
If you want to recovery used car oil, engine oil to new oil and resell it to market, this machine is what you need. contact me .
1.
Application:
ORS series waste engine oil recycling and purification plant can not only remove the carbon particles, deep oxide, etc., but also can filter off the harmful matters such as colloid, bitumen. After treated by the plant, the color of the treated oils can be recovered, similar with new one; the quality indexes are improved also, so as to resume the performance of engine oil, keep the engine being lubricated, guarantee lubricating system of engine to work properly and prolong service life of engine oil. The series plant are special for recycling all kinds of engine/motor oil used in ships, cars, trucks, buses and other vehicles.
2. Features:
1: Two main filtering systems in the ORS which can ensure the plant works continuously by batch.
2: Environmentally friendly, no acid used during operation.
3: The filters in filtering systems are made of stainless steel. It can extend lifetime of filtering systems. Traditional filter is made of fabric or paper which needs to be replaced frequently. So using stainless steel filter can largely decrease operation cost for customers.
4: Exhaust gas removing systems can remove exhaust gas quickly and efficiently and make operation more environmentally friendly.
5: Heat preservation material which can keep heating high efficient. Reducing operation cost.
6: Design according to different customers needs including Turnkey Project.
7: Purify blended oils.
8: Low maintenance and replacement.
9: Low operation cost.
10: High regeneration rate.
11: Automatic reverse-washing system will extend the lifetime of filters and improve the performance of the filters.
12: High performance security system including pressure protection device and automatic temperature controller makes purifier operate safely.
13: Small size, light weight, low noise.
Please see some oil picture before treatment and after treatment by this machine
1.
Application:
ORS series waste engine oil recycling and purification plant can not only remove the carbon particles, deep oxide, etc., but also can filter off the harmful matters such as colloid, bitumen. After treated by the plant, the color of the treated oils can be recovered, similar with new one; the quality indexes are improved also, so as to resume the performance of engine oil, keep the engine being lubricated, guarantee lubricating system of engine to work properly and prolong service life of engine oil. The series plant are special for recycling all kinds of engine/motor oil used in ships, cars, trucks, buses and other vehicles.
2. Features:
1: Two main filtering systems in the ORS which can ensure the plant works continuously by batch.
2: Environmentally friendly, no acid used during operation.
3: The filters in filtering systems are made of stainless steel. It can extend lifetime of filtering systems. Traditional filter is made of fabric or paper which needs to be replaced frequently. So using stainless steel filter can largely decrease operation cost for customers.
4: Exhaust gas removing systems can remove exhaust gas quickly and efficiently and make operation more environmentally friendly.
5: Heat preservation material which can keep heating high efficient. Reducing operation cost.
6: Design according to different customers needs including Turnkey Project.
7: Purify blended oils.
8: Low maintenance and replacement.
9: Low operation cost.
10: High regeneration rate.
11: Automatic reverse-washing system will extend the lifetime of filters and improve the performance of the filters.
12: High performance security system including pressure protection device and automatic temperature controller makes purifier operate safely.
13: Small size, light weight, low noise.
Please see some oil picture before treatment and after treatment by this machine
ORS-II used car oil purifier/oil recycling machine/oil filter plant
If you want to recovery used car oil, engine oil to new oil and resell it to market, this machine is what you need. contact me .
1.
Application:
ORS series waste engine oil recycling and purification plant can not only remove the carbon particles, deep oxide, etc., but also can filter off the harmful matters such as colloid, bitumen. After treated by the plant, the color of the treated oils can be recovered, similar with new one; the quality indexes are improved also, so as to resume the performance of engine oil, keep the engine being lubricated, guarantee lubricating system of engine to work properly and prolong service life of engine oil. The series plant are special for recycling all kinds of engine/motor oil used in ships, cars, trucks, buses and other vehicles.
2. Features:
1: Two main filtering systems in the ORS which can ensure the plant works continuously by batch.
2: Environmentally friendly, no acid used during operation.
3: The filters in filtering systems are made of stainless steel. It can extend lifetime of filtering systems. Traditional filter is made of fabric or paper which needs to be replaced frequently. So using stainless steel filter can largely decrease operation cost for customers.
4: Exhaust gas removing systems can remove exhaust gas quickly and efficiently and make operation more environmentally friendly.
5: Heat preservation material which can keep heating high efficient. Reducing operation cost.
6: Design according to different customers needs including Turnkey Project.
7: Purify blended oils.
8: Low maintenance and replacement.
9: Low operation cost.
10: High regeneration rate.
11: Automatic reverse-washing system will extend the lifetime of filters and improve the performance of the filters.
12: High performance security system including pressure protection device and automatic temperature controller makes purifier operate safely.
13: Small size, light weight, low noise.
Please see some oil picture before treatment and after treatment by this machine
1.
Application:
ORS series waste engine oil recycling and purification plant can not only remove the carbon particles, deep oxide, etc., but also can filter off the harmful matters such as colloid, bitumen. After treated by the plant, the color of the treated oils can be recovered, similar with new one; the quality indexes are improved also, so as to resume the performance of engine oil, keep the engine being lubricated, guarantee lubricating system of engine to work properly and prolong service life of engine oil. The series plant are special for recycling all kinds of engine/motor oil used in ships, cars, trucks, buses and other vehicles.
2. Features:
1: Two main filtering systems in the ORS which can ensure the plant works continuously by batch.
2: Environmentally friendly, no acid used during operation.
3: The filters in filtering systems are made of stainless steel. It can extend lifetime of filtering systems. Traditional filter is made of fabric or paper which needs to be replaced frequently. So using stainless steel filter can largely decrease operation cost for customers.
4: Exhaust gas removing systems can remove exhaust gas quickly and efficiently and make operation more environmentally friendly.
5: Heat preservation material which can keep heating high efficient. Reducing operation cost.
6: Design according to different customers needs including Turnkey Project.
7: Purify blended oils.
8: Low maintenance and replacement.
9: Low operation cost.
10: High regeneration rate.
11: Automatic reverse-washing system will extend the lifetime of filters and improve the performance of the filters.
12: High performance security system including pressure protection device and automatic temperature controller makes purifier operate safely.
13: Small size, light weight, low noise.
Please see some oil picture before treatment and after treatment by this machine
ORS-II used car oil purifier/oil recycling machine/oil filter plant
If you want to recovery used car oil, engine oil to new oil and resell it to market, this machine is what you need. contact me .
1.
Application:
ORS series waste engine oil recycling and purification plant can not only remove the carbon particles, deep oxide, etc., but also can filter off the harmful matters such as colloid, bitumen. After treated by the plant, the color of the treated oils can be recovered, similar with new one; the quality indexes are improved also, so as to resume the performance of engine oil, keep the engine being lubricated, guarantee lubricating system of engine to work properly and prolong service life of engine oil. The series plant are special for recycling all kinds of engine/motor oil used in ships, cars, trucks, buses and other vehicles.
2. Features:
1: Two main filtering systems in the ORS which can ensure the plant works continuously by batch.
2: Environmentally friendly, no acid used during operation.
3: The filters in filtering systems are made of stainless steel. It can extend lifetime of filtering systems. Traditional filter is made of fabric or paper which needs to be replaced frequently. So using stainless steel filter can largely decrease operation cost for customers.
4: Exhaust gas removing systems can remove exhaust gas quickly and efficiently and make operation more environmentally friendly.
5: Heat preservation material which can keep heating high efficient. Reducing operation cost.
6: Design according to different customers needs including Turnkey Project.
7: Purify blended oils.
8: Low maintenance and replacement.
9: Low operation cost.
10: High regeneration rate.
11: Automatic reverse-washing system will extend the lifetime of filters and improve the performance of the filters.
12: High performance security system including pressure protection device and automatic temperature controller makes purifier operate safely.
13: Small size, light weight, low noise.
Please see some oil picture before treatment and after treatment by this machine
1.
Application:
ORS series waste engine oil recycling and purification plant can not only remove the carbon particles, deep oxide, etc., but also can filter off the harmful matters such as colloid, bitumen. After treated by the plant, the color of the treated oils can be recovered, similar with new one; the quality indexes are improved also, so as to resume the performance of engine oil, keep the engine being lubricated, guarantee lubricating system of engine to work properly and prolong service life of engine oil. The series plant are special for recycling all kinds of engine/motor oil used in ships, cars, trucks, buses and other vehicles.
2. Features:
1: Two main filtering systems in the ORS which can ensure the plant works continuously by batch.
2: Environmentally friendly, no acid used during operation.
3: The filters in filtering systems are made of stainless steel. It can extend lifetime of filtering systems. Traditional filter is made of fabric or paper which needs to be replaced frequently. So using stainless steel filter can largely decrease operation cost for customers.
4: Exhaust gas removing systems can remove exhaust gas quickly and efficiently and make operation more environmentally friendly.
5: Heat preservation material which can keep heating high efficient. Reducing operation cost.
6: Design according to different customers needs including Turnkey Project.
7: Purify blended oils.
8: Low maintenance and replacement.
9: Low operation cost.
10: High regeneration rate.
11: Automatic reverse-washing system will extend the lifetime of filters and improve the performance of the filters.
12: High performance security system including pressure protection device and automatic temperature controller makes purifier operate safely.
13: Small size, light weight, low noise.
Please see some oil picture before treatment and after treatment by this machine
10 Cubic LPG Storage Tanker LPG Truck LPG Trailer
10 Cubic LPG Storage Tanker,LPG Truck,LPG Trailer
Curb weight:3165kg
Corrosion Allowance:1mm
Good quality,with 3C
10 Cubic LPG Storage Tanker,LPG Truck,LPG Trailer
Cheng Li functional characteristics of liquefied petroleum gas storage tank:
1 pressure components of the product materials, dimensions and weld quality, operation quality, installation quality, safety devices and accessories within the strict qualification.
2.conventional tank materials on physical and chemical tests such as: mechanical properties and chemical composition.
their welded joints, weld, tank head, the pressure of the geometric location of each component through rigorous X-ray non-destructive testing and magnetic particle testing inspection.
3.seal on the product, pressure, and those who can affect the operation of product safety testing various technical indicators.
4 .A, B Class 100% ray weld inspection, II level qualified
C, D Class welds 100% magnetic particle inspection, I level qualified
Product Name
CLG1600-10LPG Storage Tank
Brand Name
ChengLiWei
Overall dimensions
mm
5940*1620*2040 mm
Tank Dimension
DN1600*10*5940(inner dia*thickness*length)
Fact cubage
m
3
10
Curb Weight
Kg
3165
Working pressure
Mpa
≤1.6
Testing hydraulic pressure
2.22
Testing pressure for gas density
1.77
Working temperature
≤50
The main material of tanker
Q345R
CLW is a name brand of China,we are professional manufacturer of various garbage trucks for organic or norganic garbage,converying powder,sand,stone and any other kinds of architecture materials.Our produce can also transport ore,coal in mine to obey our customers requirement.
All kinds of our produces passed ISO9001-2000 international quality system and 3C authentication
For more detailed information, please contact:
0086-13872880538
0086-722-3801805
FAX:0086-722-3801980
& you can leave me a message with your valid E-mail address,
so that i can reply you
Curb weight:3165kg
Corrosion Allowance:1mm
Good quality,with 3C
10 Cubic LPG Storage Tanker,LPG Truck,LPG Trailer
Cheng Li functional characteristics of liquefied petroleum gas storage tank:
1 pressure components of the product materials, dimensions and weld quality, operation quality, installation quality, safety devices and accessories within the strict qualification.
2.conventional tank materials on physical and chemical tests such as: mechanical properties and chemical composition.
their welded joints, weld, tank head, the pressure of the geometric location of each component through rigorous X-ray non-destructive testing and magnetic particle testing inspection.
3.seal on the product, pressure, and those who can affect the operation of product safety testing various technical indicators.
4 .A, B Class 100% ray weld inspection, II level qualified
C, D Class welds 100% magnetic particle inspection, I level qualified
Product Name
CLG1600-10LPG Storage Tank
Brand Name
ChengLiWei
Overall dimensions
mm
5940*1620*2040 mm
Tank Dimension
DN1600*10*5940(inner dia*thickness*length)
Fact cubage
m
3
10
Curb Weight
Kg
3165
Working pressure
Mpa
≤1.6
Testing hydraulic pressure
2.22
Testing pressure for gas density
1.77
Working temperature
≤50
The main material of tanker
Q345R
CLW is a name brand of China,we are professional manufacturer of various garbage trucks for organic or norganic garbage,converying powder,sand,stone and any other kinds of architecture materials.Our produce can also transport ore,coal in mine to obey our customers requirement.
All kinds of our produces passed ISO9001-2000 international quality system and 3C authentication
For more detailed information, please contact:
0086-13872880538
0086-722-3801805
FAX:0086-722-3801980
& you can leave me a message with your valid E-mail address,
so that i can reply you
ABS Plastic Dry Mold Release Silicone Oil
it can provide a quick, effective, non - staining release of plastics and rubber for most types of plastic injection moulding.
Product Information
FUKKOL MOULD RELEASE AGENT PAINTABLE is an aerosol applied release agent formulated to provide a quick, effective, non - staining release of plastics and rubber for most types of plastic injection moulding. In addition, it is specially designed for products subject to subsequent processes such ad printing, painting, plating, hot stamping and bonding operations without the so - called “SILICONE PROBLEMS”.
Virtue
*Ultra fine spray gives controlled application with complete coverage
*Improved finish and reduced risk of over application
*Reduces problems associated with marking and transfer, highly economical, efficient release, only one pass required for many shots of ejection
*Effective and long lasting film provides more numbers of release than most silicone formulations
*Low environmental impact, contains no CFC propellant
*Excellent for all thermal plastic, especially ABS and PS
*Will not affect subsequent operations.
*Excellent lubricant for sewing threads, table surface , needles and knives.
Product Information
FUKKOL MOULD RELEASE AGENT PAINTABLE is an aerosol applied release agent formulated to provide a quick, effective, non - staining release of plastics and rubber for most types of plastic injection moulding. In addition, it is specially designed for products subject to subsequent processes such ad printing, painting, plating, hot stamping and bonding operations without the so - called “SILICONE PROBLEMS”.
Virtue
*Ultra fine spray gives controlled application with complete coverage
*Improved finish and reduced risk of over application
*Reduces problems associated with marking and transfer, highly economical, efficient release, only one pass required for many shots of ejection
*Effective and long lasting film provides more numbers of release than most silicone formulations
*Low environmental impact, contains no CFC propellant
*Excellent for all thermal plastic, especially ABS and PS
*Will not affect subsequent operations.
*Excellent lubricant for sewing threads, table surface , needles and knives.
OTMAN C1-36 Brake Fluid
OTMAN C1-36 Brake Fluid
1.MSDS,ISO,CE,SASO,SONCAP..
2.Good Quality
3.Diliver Fast;
4.China Top 10 Factory
Brake Fluid DOT3
A chemically balanced, non petroleum hydraulic brake fluid meets SASO requirments and also gives performance similar to international SAE J 1703 and ISO 4925 and gulf SASO.
it is design for use in conventional motor vehicle hydrulic brake and clutch system
It is made up with international advanced technology
and excellent materails DOT3 brake fluid
DOT3 Brake Oil.DOT4 of brake fluid
High quality.Brake Fluid Mixes With All DOT-3 LATOP brand synthetic brake fluid is made up with international advanced technology and excellent materials. The quality index accords with the standard of national GB12981-2003 and the DOT3 by Transportation Security Ministry of USA. The brake fluid is suitable for the hydraulic pressure brake system of all kinds of imported, domestic produced automobiles.
DOT fluid
Equilibrium reflux boiling point 205, damp boiling point140
DOT4
Poise circumferences boiling point 230, damp boil
Made with advanced prescriptions, synthetic brake fluid meets the standards of
GB10830-1998\JLSK2233BF-3\SAEJ1703\FMVSS NO. 116DOT3 and ISO 4925. It is suitable for brake, clutches and other hydraulic transmission systems of various vehicle types.
Excellent high-low temperature characteristics.
Stable performances to ensure brake system more sensitive and safer.
Excellent oil-rubber seal compatibility, preventing container from leakage.
Recommended Applications:
Suitable for hydraulic brake systems of different sedans and load-carrying cars.
Featured by Elevated temperature, Low temperature resistance. Corrosion resistance and Rust protection, gafle
Is the good choice for your safe driving.
Package:
480ml X 24pcs/ carton
354ml X24pcs/carton
250ml X24pcs/carton
Applications:
1. Don't mix with water or mineral oil.
2. Store brake fluid only its original container and tighten the container cap if there is remaining breake fluid.
3. Replace the brake fluid once a year.
4. Don't spill the brake fluid over paint coat of the car
5. Keep away from children
1.MSDS,ISO,CE,SASO,SONCAP..
2.Good Quality
3.Diliver Fast;
4.China Top 10 Factory
Brake Fluid DOT3
A chemically balanced, non petroleum hydraulic brake fluid meets SASO requirments and also gives performance similar to international SAE J 1703 and ISO 4925 and gulf SASO.
it is design for use in conventional motor vehicle hydrulic brake and clutch system
It is made up with international advanced technology
and excellent materails DOT3 brake fluid
DOT3 Brake Oil.DOT4 of brake fluid
High quality.Brake Fluid Mixes With All DOT-3 LATOP brand synthetic brake fluid is made up with international advanced technology and excellent materials. The quality index accords with the standard of national GB12981-2003 and the DOT3 by Transportation Security Ministry of USA. The brake fluid is suitable for the hydraulic pressure brake system of all kinds of imported, domestic produced automobiles.
DOT fluid
Equilibrium reflux boiling point 205, damp boiling point140
DOT4
Poise circumferences boiling point 230, damp boil
Made with advanced prescriptions, synthetic brake fluid meets the standards of
GB10830-1998\JLSK2233BF-3\SAEJ1703\FMVSS NO. 116DOT3 and ISO 4925. It is suitable for brake, clutches and other hydraulic transmission systems of various vehicle types.
Excellent high-low temperature characteristics.
Stable performances to ensure brake system more sensitive and safer.
Excellent oil-rubber seal compatibility, preventing container from leakage.
Recommended Applications:
Suitable for hydraulic brake systems of different sedans and load-carrying cars.
Featured by Elevated temperature, Low temperature resistance. Corrosion resistance and Rust protection, gafle
Is the good choice for your safe driving.
Package:
480ml X 24pcs/ carton
354ml X24pcs/carton
250ml X24pcs/carton
Applications:
1. Don't mix with water or mineral oil.
2. Store brake fluid only its original container and tighten the container cap if there is remaining breake fluid.
3. Replace the brake fluid once a year.
4. Don't spill the brake fluid over paint coat of the car
5. Keep away from children
Ocean Steamer Anti-rust Spray
-Contains a brown dye to identify treated surfaces
-Simply removed by putting mould back in service-
Product Information
Fukkol Rustking l type is a light grease-like coating that has a brown colour that visably shows where the product has been applied. Rustking l type displaces moisture and provides corrosion protection for 50°C~60°Cnot flux more than five years of indoor storage and three years of ourdoor.. The product may be removed with a mild solvent rinse or wipe or simply by putting a mould back in service and running a few parts.
Product Application
Its brown color ultra-thin soft film which provides long term corrosion protection to metals. Absolutely displaces water and resists moisture. Especially designed for protection of moulds, castings and dies in production or in storage. A reliable rust preventative agent for metal tools and parts.
Virtue
-Contains a brown dye to identify treated surfaces
-Simply removed by putting mould back in service
-Provides complete protection against finger-print
-Provides corrosion protection for more than 5 years (indoor)
--Provides corrosion protection for more than 3 years (ourdoor)
-Simply removed by putting mould back in service-
Product Information
Fukkol Rustking l type is a light grease-like coating that has a brown colour that visably shows where the product has been applied. Rustking l type displaces moisture and provides corrosion protection for 50°C~60°Cnot flux more than five years of indoor storage and three years of ourdoor.. The product may be removed with a mild solvent rinse or wipe or simply by putting a mould back in service and running a few parts.
Product Application
Its brown color ultra-thin soft film which provides long term corrosion protection to metals. Absolutely displaces water and resists moisture. Especially designed for protection of moulds, castings and dies in production or in storage. A reliable rust preventative agent for metal tools and parts.
Virtue
-Contains a brown dye to identify treated surfaces
-Simply removed by putting mould back in service
-Provides complete protection against finger-print
-Provides corrosion protection for more than 5 years (indoor)
--Provides corrosion protection for more than 3 years (ourdoor)
Oceanpower Color Bitumen
1 Product introduction
2 Technical data
3 Color design service
Oceanpower Color Bitumen
Oceanpower color bitumen is made from petroleum resin, and its working performance is basically the same as that of general bitumen; because of adding high molecular polymer, modifying agent and so on to the binder, the plasticity and ductility are raised by a large margin. Environment-friendly binder effectively reduces carcinogen such as 3-4 phenylpropyl derivant that is common in bitumen.
Technical Data
Index
Unit
Executive norm
OP-50
OP-70
OP-90
Density 15
g·cm
-
3
GB/T 8928
Actual observation record
Relative density25
1.00±0.03
Softening point
no less than
GB/T 4507
50
56
60
Penetration degree
25,100g,5s
0.1mm
GB/T 4509
40-60
60-80
80-100
Ductility
no less than
10
cm
GB/T 4508
20
25
30
15
100
Dissolvability, no less than
%
GB/T 11148
99.5
60kinematic viscosity,
No less than
Cattle way
Pa·s
ASTM
D2171
180
160
160
Motor way
200
200
200
135 kinematic viscosity,
No more than
Pa·s
ASTM D2170
ASTM D4402
3
Thin film oven heat test163,5h
Mass loss rate,
no more than
%
GB/T 5304
±2
Retained penetration,
no less than
%
GB/T 4509
55
Softening point
GB/T 4507
Original data±5
Retained ductility
no less than
10
cm
GB/T 4508
5
6
8
15
20
Color
Fe-Co
Unconverted
Color design service
2 Technical data
3 Color design service
Oceanpower Color Bitumen
Oceanpower color bitumen is made from petroleum resin, and its working performance is basically the same as that of general bitumen; because of adding high molecular polymer, modifying agent and so on to the binder, the plasticity and ductility are raised by a large margin. Environment-friendly binder effectively reduces carcinogen such as 3-4 phenylpropyl derivant that is common in bitumen.
Technical Data
Index
Unit
Executive norm
OP-50
OP-70
OP-90
Density 15
g·cm
-
3
GB/T 8928
Actual observation record
Relative density25
1.00±0.03
Softening point
no less than
GB/T 4507
50
56
60
Penetration degree
25,100g,5s
0.1mm
GB/T 4509
40-60
60-80
80-100
Ductility
no less than
10
cm
GB/T 4508
20
25
30
15
100
Dissolvability, no less than
%
GB/T 11148
99.5
60kinematic viscosity,
No less than
Cattle way
Pa·s
ASTM
D2171
180
160
160
Motor way
200
200
200
135 kinematic viscosity,
No more than
Pa·s
ASTM D2170
ASTM D4402
3
Thin film oven heat test163,5h
Mass loss rate,
no more than
%
GB/T 5304
±2
Retained penetration,
no less than
%
GB/T 4509
55
Softening point
GB/T 4507
Original data±5
Retained ductility
no less than
10
cm
GB/T 4508
5
6
8
15
20
Color
Fe-Co
Unconverted
Color design service
Offer Panasonic MP 2S N510006423AA GREASE
Panasonic Mp Grease 2s N510006423AA 400g/piece.
Panasonic Mp Grease N990PANA-022 100G/Piece
Panasonic Mp Grease N990PANA-023 1KG/piece
Panasonic Mp N990PANA-026 500ML
Panasonic Mp Grease N990PANA-027 80G/piece
Panasonic Touch Lube N990PANA-028 20ML/piece
Panasonic Mp Grease 2s N510017070AA
Panasonic MP Grease 2S N510006423AA 400G/piece
Panasonic N510048188AA 400G/piece
Panasonic N510048190AA 200G/piece
Panasonic N510048200AA 80G/piece
Panasonic Mp Grease N990PANA-022 100G/Piece
Panasonic Mp Grease N990PANA-023 1KG/piece
Panasonic Mp N990PANA-026 500ML
Panasonic Mp Grease N990PANA-027 80G/piece
Panasonic Touch Lube N990PANA-028 20ML/piece
Panasonic Mp Grease 2s N510017070AA
Panasonic MP Grease 2S N510006423AA 400G/piece
Panasonic N510048188AA 400G/piece
Panasonic N510048190AA 200G/piece
Panasonic N510048200AA 80G/piece
Offer Panasonic MP N990PANA-023 GREASE
Panasonic Mp Grease N990PANA-023 1KG/CANS
Panasonic Mp Grease N990PANA-022 100G/Piece
Panasonic Mp Grease N990PANA-023 1KG/piece
Panasonic Mp N990PANA-026 500ML
Panasonic Mp Grease N990PANA-027 80G/piece
Panasonic Touch Lube N990PANA-028 20ML/piece
Panasonic Mp Grease 2s N510017070AA
Panasonic MP Grease 2S N510006423AA 400G/piece
Panasonic N510048188AA 400G/piece
Panasonic N510048190AA 200G/piece
Panasonic N510048200AA 80G/piece
Panasonic Mp Grease N990PANA-022 100G/Piece
Panasonic Mp Grease N990PANA-023 1KG/piece
Panasonic Mp N990PANA-026 500ML
Panasonic Mp Grease N990PANA-027 80G/piece
Panasonic Touch Lube N990PANA-028 20ML/piece
Panasonic Mp Grease 2s N510017070AA
Panasonic MP Grease 2S N510006423AA 400G/piece
Panasonic N510048188AA 400G/piece
Panasonic N510048190AA 200G/piece
Panasonic N510048200AA 80G/piece
Offer Panasonic MP N990PANA-027 GREASE
Panasonic Mp Grease N990PANA-027 80G/piece
Panasonic Mp Grease N990PANA-022 100G/Piece
Panasonic Mp Grease N990PANA-023 1KG/piece
Panasonic Mp N990PANA-026 500ML
Panasonic Mp Grease N990PANA-027 80G/piece
Panasonic Touch Lube N990PANA-028 20ML/piece
Panasonic Mp Grease 2s N510017070AA
Panasonic MP Grease 2S N510006423AA 400G/piece
Panasonic N510048188AA 400G/piece
Panasonic N510048190AA 200G/piece
Panasonic N510048200AA 80G/piece
Panasonic Mp Grease N990PANA-022 100G/Piece
Panasonic Mp Grease N990PANA-023 1KG/piece
Panasonic Mp N990PANA-026 500ML
Panasonic Mp Grease N990PANA-027 80G/piece
Panasonic Touch Lube N990PANA-028 20ML/piece
Panasonic Mp Grease 2s N510017070AA
Panasonic MP Grease 2S N510006423AA 400G/piece
Panasonic N510048188AA 400G/piece
Panasonic N510048190AA 200G/piece
Panasonic N510048200AA 80G/piece
Offer Panasonic N510048188AA GREASE
Panasonic N510048188AA 400G/piece
Panasonic Mp Grease N990PANA-022 100G/Piece
Panasonic Mp Grease N990PANA-023 1KG/piece
Panasonic Mp N990PANA-026 500ML
Panasonic Mp Grease N990PANA-027 80G/piece
Panasonic Touch Lube N990PANA-028 20ML/piece
Panasonic Mp Grease 2s N510017070AA
Panasonic MP Grease 2S N510006423AA 400G/piece
Panasonic N510048188AA 400G/piece
Panasonic N510048190AA 200G/piece
Panasonic N510048200AA 80G/piece
Panasonic Mp Grease N990PANA-022 100G/Piece
Panasonic Mp Grease N990PANA-023 1KG/piece
Panasonic Mp N990PANA-026 500ML
Panasonic Mp Grease N990PANA-027 80G/piece
Panasonic Touch Lube N990PANA-028 20ML/piece
Panasonic Mp Grease 2s N510017070AA
Panasonic MP Grease 2S N510006423AA 400G/piece
Panasonic N510048188AA 400G/piece
Panasonic N510048190AA 200G/piece
Panasonic N510048200AA 80G/piece
Oil & Gas Fracturing Ceramic Proppant
1.High crushing strength
2.Fracturing
3.Low solubility
4.direct manufacturer of Oil Ceramic
1.High crushing strength
2.Fracturing
3.Low solubility
4.direct manufacturer of Oil Ceramic
oil fracture ceramic proppant
the high quality bauxite as raw material, High crush resistance and best Roundness
Oil fracture ceramic proppant is the key material in low-permeability fracturing of oil and gas wells exploration. This products used in the construction of deep well fracturing, be filled to the low permeability of the rock deposits in the cracks, fracturing close to the high oil recovery operations, so that oil and gas cracked rock, support for propping fractures not close because of releasing force, thereby to maintain the high conductivity of oil and gas, not only can increase the oil and gas production output, also can extend the oil and gas wellss length of service.
2.Fracturing
3.Low solubility
4.direct manufacturer of Oil Ceramic
1.High crushing strength
2.Fracturing
3.Low solubility
4.direct manufacturer of Oil Ceramic
oil fracture ceramic proppant
the high quality bauxite as raw material, High crush resistance and best Roundness
Oil fracture ceramic proppant is the key material in low-permeability fracturing of oil and gas wells exploration. This products used in the construction of deep well fracturing, be filled to the low permeability of the rock deposits in the cracks, fracturing close to the high oil recovery operations, so that oil and gas cracked rock, support for propping fractures not close because of releasing force, thereby to maintain the high conductivity of oil and gas, not only can increase the oil and gas production output, also can extend the oil and gas wellss length of service.
Wednesday, June 1, 2011
Oil & Gas Fracturing Ceramic Proppant
High crushing strength & low solubility
1.High crushing strength
2.Fracturing
3.Low solubility
4.direct manufacturer of Oil Ceramic
oil fracture ceramic proppant
the high quality bauxite as raw material, High crush resistance and best Roundness
Oil fracture ceramic proppant is the key material in low-permeability fracturing of oil and gas wells exploration. This products used in the construction of deep well fracturing, be filled to the low permeability of the rock deposits in the cracks, fracturing close to the high oil recovery operations, so that oil and gas cracked rock, support for propping fractures not close because of releasing force, thereby to maintain the high conductivity of oil and gas, not only can increase the oil and gas production output, also can extend the oil and gas wellss length of service.
1.High crushing strength
2.Fracturing
3.Low solubility
4.direct manufacturer of Oil Ceramic
oil fracture ceramic proppant
the high quality bauxite as raw material, High crush resistance and best Roundness
Oil fracture ceramic proppant is the key material in low-permeability fracturing of oil and gas wells exploration. This products used in the construction of deep well fracturing, be filled to the low permeability of the rock deposits in the cracks, fracturing close to the high oil recovery operations, so that oil and gas cracked rock, support for propping fractures not close because of releasing force, thereby to maintain the high conductivity of oil and gas, not only can increase the oil and gas production output, also can extend the oil and gas wellss length of service.
Oil Ceramic Proppant
Specifications:
1.High crushing strength
2.Fracturing
3.Widely used in the exploration of Oil&Gas wells.
T
his product has the very high compression fracture intensity, mainly uses in the oil field mine shaft support, should to increase
p
roduction the petroleum natural gas to have the good results. When the petroleum natural gas deep well mines, high closed pressure low permeable ore deposit after fracturing treatment, enables to split including the oil gas rock layer, oil gas in the channel which forms from the crack collects. Accompanies the high-pressured solution with the support material to enter the stratum backfill in the rock layer crevasse, plays the support crevasse not because of the stress release, but closed role, thus maintains high conduction current ability, causes the oil gas to be unimpeded, the gain in yield. The practice proved that the use proppant compression fracture's oil well may raise the output 30-50%, but can also lengthen the oil gas well service life
.
size
properties
20/40
30/50
Apprant density (g/m3)
3.21
3.28
Bulk density(g/m3)
1.79
1.80
Sphericity
≥0.80
≥0.80
Roundness
≥0.80
≥0.80
Turbility FTU
≤100
≤100
Acid Solubility
≤8
≤8
crush
52Mp
69Mp
5.36
2.45
1.High crushing strength
2.Fracturing
3.Widely used in the exploration of Oil&Gas wells.
T
his product has the very high compression fracture intensity, mainly uses in the oil field mine shaft support, should to increase
p
roduction the petroleum natural gas to have the good results. When the petroleum natural gas deep well mines, high closed pressure low permeable ore deposit after fracturing treatment, enables to split including the oil gas rock layer, oil gas in the channel which forms from the crack collects. Accompanies the high-pressured solution with the support material to enter the stratum backfill in the rock layer crevasse, plays the support crevasse not because of the stress release, but closed role, thus maintains high conduction current ability, causes the oil gas to be unimpeded, the gain in yield. The practice proved that the use proppant compression fracture's oil well may raise the output 30-50%, but can also lengthen the oil gas well service life
.
size
properties
20/40
30/50
Apprant density (g/m3)
3.21
3.28
Bulk density(g/m3)
1.79
1.80
Sphericity
≥0.80
≥0.80
Roundness
≥0.80
≥0.80
Turbility FTU
≤100
≤100
Acid Solubility
≤8
≤8
crush
52Mp
69Mp
5.36
2.45
ACETONE CYANOHYDRIN
ACETONE CYANOHYDRIN is clear, colourless liquid.
ACETONE CYANOHYDRIN is clear, colourless liquid.
CAS NO. 75-86-5
FORMULA (CH
3
)
2
C(OH)CN
MOL WT 85.11
H.S.CODE 2926.90
PHYSICAL AND CHEMICAL PROPERTIES
PHYSICAL STATE Clear, colourless liquid
Melting point -19 C
BOILING POINT 82 C
SPECIFIC GRAVITY 0.932
SOLUBILITY IN WATER miscible
SOLVENT SOLUBILITY Soluble: alcohol,ether,acetone,benzene;Insoluble:petroleum ether
AUTOIGNITION 688 C
PH 3(10% Sol)
VAPOR DENSITY 2.93
NFPA RATINGS Health: 4 Flammability: 2 Reactivity:2
FLASH POINT 73C
STABILITY Stable under ordinary conditions
APPLICATIONS:
Cyanohydrins are organic compounds which contain both cyano and hydroxyl groups linked to the same carbon atom usually.Cyanothydrins are obtained from the reactions of aldehydes(or ketones) with hydrogen cyanide in base.They are versatile intermediates for the synthesis of organic compounds including amino nitriles;alpha-hydroxy acids,esters and amides;alpha-,beta-unsaturated acids,esters,nitriles as well as beta-aminoalcohols.Acetone Cyanohydrin is used to manufacture insecticides,pharmaceuticals and flavouring agents.It is an important intermediate to prepare methacrylic acid and methacrylates.
SALES SPECIFICATION
Basic Substance Content, % wt, not less than 99.4
Acid Content as calculated for Sulphuric Acid, %, not more than 0.1
Impurities,insoluble in water Nil
Water Content, %, not more than 0.2</P< div>
ACETONE CYANOHYDRIN is clear, colourless liquid.
CAS NO. 75-86-5
FORMULA (CH
3
)
2
C(OH)CN
MOL WT 85.11
H.S.CODE 2926.90
PHYSICAL AND CHEMICAL PROPERTIES
PHYSICAL STATE Clear, colourless liquid
Melting point -19 C
BOILING POINT 82 C
SPECIFIC GRAVITY 0.932
SOLUBILITY IN WATER miscible
SOLVENT SOLUBILITY Soluble: alcohol,ether,acetone,benzene;Insoluble:petroleum ether
AUTOIGNITION 688 C
PH 3(10% Sol)
VAPOR DENSITY 2.93
NFPA RATINGS Health: 4 Flammability: 2 Reactivity:2
FLASH POINT 73C
STABILITY Stable under ordinary conditions
APPLICATIONS:
Cyanohydrins are organic compounds which contain both cyano and hydroxyl groups linked to the same carbon atom usually.Cyanothydrins are obtained from the reactions of aldehydes(or ketones) with hydrogen cyanide in base.They are versatile intermediates for the synthesis of organic compounds including amino nitriles;alpha-hydroxy acids,esters and amides;alpha-,beta-unsaturated acids,esters,nitriles as well as beta-aminoalcohols.Acetone Cyanohydrin is used to manufacture insecticides,pharmaceuticals and flavouring agents.It is an important intermediate to prepare methacrylic acid and methacrylates.
SALES SPECIFICATION
Basic Substance Content, % wt, not less than 99.4
Acid Content as calculated for Sulphuric Acid, %, not more than 0.1
Impurities,insoluble in water Nil
Water Content, %, not more than 0.2</P< div>
Oil Ceramic Proppant
1.High Strength.
2.Good quality & competive price.
3.Widely used in the exporation of oil & gas wells.
Ceramic proppant is the key material in low-permeability fracturing of oil and gas wells exploration. This products used in the construction of deep well fracturing, be filled to the low permeability of the rock deposits in the cracks, fracturing close to the high oil recovery operations, so that oil and gas cracked rock, support for propping fractures not close because of releasing force, thereby to maintain the high conductivity of oil and gas, not only can increase the oil and gas production output, also can extend the oil and gas wellss length of service.
Our oil Proppant are divided according to the anti-crushing strength into 52Mpa (105KN), 69Mpa (140KN), and 86Mpa, (174KN) three series, according to bulk density are divided into: low-density, medium density, high-density. Product specifications are :12-18 mesh ,12-20 mesh ,16-20 mesh ,16-30 mesh, 20-40 mesh between 30-50 mesh, 40-60 mesh, 40-70 mesh and so on.
Specification
Bulk Density
(g/cm3)
Apparent Density
(g/cm3)
Close Pressure
(Mpa)
PERCENTAGE OF CRUSHING (%)
SPHERICITY ROUNDNESS
HIGH DENSITY
16MESH-30MESH
>1.80
>3.35
69
≤18.0
>0.8
HIGH DENSITY
20MESH-40MESH
>1.80
>3.35
69
≤5.0
>0.8
HIGH DENSITY
30MESH-50MESH
>1.80
>3.35
69
≤5.0
>0.8
MIDDLE DENSITY
16MESH-30MESH
≤1.80
≤3.35
69
≤18.0
>0.8
MIDDLE DENSITY
20MESH-40MESH
≤1.80
≤3.35
52
≤4.0
>0.8
MIDDLE DENSITY
30MESH-50MESH
≤1.80
≤3.35
69
≤6.0
>0.8
LOW DENSITY
30MESH-50MESH
1.63
2.71
52
4.83
>0.8
69
7.33
86
14.54
LOW DENSITY
40MESH-70MESH
1.62
2.70
52
3.98
>0.8
69
7.14
86
8.98
2.Good quality & competive price.
3.Widely used in the exporation of oil & gas wells.
Ceramic proppant is the key material in low-permeability fracturing of oil and gas wells exploration. This products used in the construction of deep well fracturing, be filled to the low permeability of the rock deposits in the cracks, fracturing close to the high oil recovery operations, so that oil and gas cracked rock, support for propping fractures not close because of releasing force, thereby to maintain the high conductivity of oil and gas, not only can increase the oil and gas production output, also can extend the oil and gas wellss length of service.
Our oil Proppant are divided according to the anti-crushing strength into 52Mpa (105KN), 69Mpa (140KN), and 86Mpa, (174KN) three series, according to bulk density are divided into: low-density, medium density, high-density. Product specifications are :12-18 mesh ,12-20 mesh ,16-20 mesh ,16-30 mesh, 20-40 mesh between 30-50 mesh, 40-60 mesh, 40-70 mesh and so on.
Specification
Bulk Density
(g/cm3)
Apparent Density
(g/cm3)
Close Pressure
(Mpa)
PERCENTAGE OF CRUSHING (%)
SPHERICITY ROUNDNESS
HIGH DENSITY
16MESH-30MESH
>1.80
>3.35
69
≤18.0
>0.8
HIGH DENSITY
20MESH-40MESH
>1.80
>3.35
69
≤5.0
>0.8
HIGH DENSITY
30MESH-50MESH
>1.80
>3.35
69
≤5.0
>0.8
MIDDLE DENSITY
16MESH-30MESH
≤1.80
≤3.35
69
≤18.0
>0.8
MIDDLE DENSITY
20MESH-40MESH
≤1.80
≤3.35
52
≤4.0
>0.8
MIDDLE DENSITY
30MESH-50MESH
≤1.80
≤3.35
69
≤6.0
>0.8
LOW DENSITY
30MESH-50MESH
1.63
2.71
52
4.83
>0.8
69
7.33
86
14.54
LOW DENSITY
40MESH-70MESH
1.62
2.70
52
3.98
>0.8
69
7.14
86
8.98
Oil Ceramic Proppant
1.High Strength.
2.Good quality & competive price.
3.Widely used in the exporation of oil & gas wells.
Ceramic proppant is the key material in low-permeability fracturing of oil and gas wells exploration. This products used in the construction of deep well fracturing, be filled to the low permeability of the rock deposits in the cracks, fracturing close to the high oil recovery operations, so that oil and gas cracked rock, support for propping fractures not close because of releasing force, thereby to maintain the high conductivity of oil and gas, not only can increase the oil and gas production output, also can extend the oil and gas wellss length of service.
Our oil Proppant are divided according to the anti-crushing strength into 52Mpa (105KN), 69Mpa (140KN), and 86Mpa, (174KN) three series, according to bulk density are divided into: low-density, medium density, high-density. Product specifications are :12-18 mesh ,12-20 mesh ,16-20 mesh ,16-30 mesh, 20-40 mesh between 30-50 mesh, 40-60 mesh, 40-70 mesh and so on.
Specification
Bulk Density
(g/cm3)
Apparent Density
(g/cm3)
Close Pressure
(Mpa)
PERCENTAGE OF CRUSHING (%)
SPHERICITY ROUNDNESS
HIGH DENSITY
16MESH-30MESH
>1.80
>3.35
69
≤18.0
>0.8
HIGH DENSITY
20MESH-40MESH
>1.80
>3.35
69
≤5.0
>0.8
HIGH DENSITY
30MESH-50MESH
>1.80
>3.35
69
≤5.0
>0.8
MIDDLE DENSITY
16MESH-30MESH
≤1.80
≤3.35
69
≤18.0
>0.8
MIDDLE DENSITY
20MESH-40MESH
≤1.80
≤3.35
52
≤4.0
>0.8
MIDDLE DENSITY
30MESH-50MESH
≤1.80
≤3.35
69
≤6.0
>0.8
LOW DENSITY
30MESH-50MESH
1.63
2.71
52
4.83
>0.8
69
7.33
86
14.54
LOW DENSITY
40MESH-70MESH
1.62
2.70
52
3.98
>0.8
69
7.14
86
8.98
2.Good quality & competive price.
3.Widely used in the exporation of oil & gas wells.
Ceramic proppant is the key material in low-permeability fracturing of oil and gas wells exploration. This products used in the construction of deep well fracturing, be filled to the low permeability of the rock deposits in the cracks, fracturing close to the high oil recovery operations, so that oil and gas cracked rock, support for propping fractures not close because of releasing force, thereby to maintain the high conductivity of oil and gas, not only can increase the oil and gas production output, also can extend the oil and gas wellss length of service.
Our oil Proppant are divided according to the anti-crushing strength into 52Mpa (105KN), 69Mpa (140KN), and 86Mpa, (174KN) three series, according to bulk density are divided into: low-density, medium density, high-density. Product specifications are :12-18 mesh ,12-20 mesh ,16-20 mesh ,16-30 mesh, 20-40 mesh between 30-50 mesh, 40-60 mesh, 40-70 mesh and so on.
Specification
Bulk Density
(g/cm3)
Apparent Density
(g/cm3)
Close Pressure
(Mpa)
PERCENTAGE OF CRUSHING (%)
SPHERICITY ROUNDNESS
HIGH DENSITY
16MESH-30MESH
>1.80
>3.35
69
≤18.0
>0.8
HIGH DENSITY
20MESH-40MESH
>1.80
>3.35
69
≤5.0
>0.8
HIGH DENSITY
30MESH-50MESH
>1.80
>3.35
69
≤5.0
>0.8
MIDDLE DENSITY
16MESH-30MESH
≤1.80
≤3.35
69
≤18.0
>0.8
MIDDLE DENSITY
20MESH-40MESH
≤1.80
≤3.35
52
≤4.0
>0.8
MIDDLE DENSITY
30MESH-50MESH
≤1.80
≤3.35
69
≤6.0
>0.8
LOW DENSITY
30MESH-50MESH
1.63
2.71
52
4.83
>0.8
69
7.33
86
14.54
LOW DENSITY
40MESH-70MESH
1.62
2.70
52
3.98
>0.8
69
7.14
86
8.98
Oil Ceramic Proppant
1.High Strength.
2.Good quality & competive price.
3.Widely used in the exporation of oil & gas wells.
Ceramic proppant is the key material in low-permeability fracturing of oil and gas wells exploration. This products used in the construction of deep well fracturing, be filled to the low permeability of the rock deposits in the cracks, fracturing close to the high oil recovery operations, so that oil and gas cracked rock, support for propping fractures not close because of releasing force, thereby to maintain the high conductivity of oil and gas, not only can increase the oil and gas production output, also can extend the oil and gas wellss length of service.
Our oil Proppant are divided according to the anti-crushing strength into 52Mpa (105KN), 69Mpa (140KN), and 86Mpa, (174KN) three series, according to bulk density are divided into: low-density, medium density, high-density. Product specifications are :12-18 mesh ,12-20 mesh ,16-20 mesh ,16-30 mesh, 20-40 mesh between 30-50 mesh, 40-60 mesh, 40-70 mesh and so on.
2.Good quality & competive price.
3.Widely used in the exporation of oil & gas wells.
Ceramic proppant is the key material in low-permeability fracturing of oil and gas wells exploration. This products used in the construction of deep well fracturing, be filled to the low permeability of the rock deposits in the cracks, fracturing close to the high oil recovery operations, so that oil and gas cracked rock, support for propping fractures not close because of releasing force, thereby to maintain the high conductivity of oil and gas, not only can increase the oil and gas production output, also can extend the oil and gas wellss length of service.
Our oil Proppant are divided according to the anti-crushing strength into 52Mpa (105KN), 69Mpa (140KN), and 86Mpa, (174KN) three series, according to bulk density are divided into: low-density, medium density, high-density. Product specifications are :12-18 mesh ,12-20 mesh ,16-20 mesh ,16-30 mesh, 20-40 mesh between 30-50 mesh, 40-60 mesh, 40-70 mesh and so on.
Oil Ceramic Proppant
1.High Strength.
2.Good quality & competive price.
3.Widely used in the exporation of oil & gas wells.
Ceramic proppant is the key material in low-permeability fracturing of oil and gas wells exploration. This products used in the construction of deep well fracturing, be filled to the low permeability of the rock deposits in the cracks, fracturing close to the high oil recovery operations, so that oil and gas cracked rock, support for propping fractures not close because of releasing force, thereby to maintain the high conductivity of oil and gas, not only can increase the oil and gas production output, also can extend the oil and gas wellss length of service.
Our oil Proppant are divided according to the anti-crushing strength into 52Mpa (105KN), 69Mpa (140KN), and 86Mpa, (174KN) three series, according to bulk density are divided into: low-density, medium density, high-density. Product specifications are :12-18 mesh ,12-20 mesh ,16-20 mesh ,16-30 mesh, 20-40 mesh between 30-50 mesh, 40-60 mesh, 40-70 mesh and so on.
Specification
Bulk Density
(g/cm3)
Apparent Density
(g/cm3)
Close Pressure
(Mpa)
PERCENTAGE OF CRUSHING (%)
SPHERICITY ROUNDNESS
HIGH DENSITY
16MESH-30MESH
>1.80
>3.35
69
≤18.0
>0.8
HIGH DENSITY
20MESH-40MESH
>1.80
>3.35
69
≤5.0
>0.8
HIGH DENSITY
30MESH-50MESH
>1.80
>3.35
69
≤5.0
>0.8
MIDDLE DENSITY
16MESH-30MESH
≤1.80
≤3.35
69
≤18.0
>0.8
MIDDLE DENSITY
20MESH-40MESH
≤1.80
≤3.35
52
≤4.0
>0.8
MIDDLE DENSITY
30MESH-50MESH
≤1.80
≤3.35
69
≤6.0
>0.8
LOW DENSITY
30MESH-50MESH
1.63
2.71
52
4.83
>0.8
69
7.33
86
14.54
LOW DENSITY
40MESH-70MESH
1.62
2.70
52
3.98
>0.8
69
7.14
86
8.98
2.Good quality & competive price.
3.Widely used in the exporation of oil & gas wells.
Ceramic proppant is the key material in low-permeability fracturing of oil and gas wells exploration. This products used in the construction of deep well fracturing, be filled to the low permeability of the rock deposits in the cracks, fracturing close to the high oil recovery operations, so that oil and gas cracked rock, support for propping fractures not close because of releasing force, thereby to maintain the high conductivity of oil and gas, not only can increase the oil and gas production output, also can extend the oil and gas wellss length of service.
Our oil Proppant are divided according to the anti-crushing strength into 52Mpa (105KN), 69Mpa (140KN), and 86Mpa, (174KN) three series, according to bulk density are divided into: low-density, medium density, high-density. Product specifications are :12-18 mesh ,12-20 mesh ,16-20 mesh ,16-30 mesh, 20-40 mesh between 30-50 mesh, 40-60 mesh, 40-70 mesh and so on.
Specification
Bulk Density
(g/cm3)
Apparent Density
(g/cm3)
Close Pressure
(Mpa)
PERCENTAGE OF CRUSHING (%)
SPHERICITY ROUNDNESS
HIGH DENSITY
16MESH-30MESH
>1.80
>3.35
69
≤18.0
>0.8
HIGH DENSITY
20MESH-40MESH
>1.80
>3.35
69
≤5.0
>0.8
HIGH DENSITY
30MESH-50MESH
>1.80
>3.35
69
≤5.0
>0.8
MIDDLE DENSITY
16MESH-30MESH
≤1.80
≤3.35
69
≤18.0
>0.8
MIDDLE DENSITY
20MESH-40MESH
≤1.80
≤3.35
52
≤4.0
>0.8
MIDDLE DENSITY
30MESH-50MESH
≤1.80
≤3.35
69
≤6.0
>0.8
LOW DENSITY
30MESH-50MESH
1.63
2.71
52
4.83
>0.8
69
7.33
86
14.54
LOW DENSITY
40MESH-70MESH
1.62
2.70
52
3.98
>0.8
69
7.14
86
8.98
Oil Ceramic Proppant
1.High Strength.
2.Good quality & competive price.
3.Widely used in the exporation of oil & gas wells.
Ceramic proppant is the key material in low-permeability fracturing of oil and gas wells exploration. This products used in the construction of deep well fracturing, be filled to the low permeability of the rock deposits in the cracks, fracturing close to the high oil recovery operations, so that oil and gas cracked rock, support for propping fractures not close because of releasing force, thereby to maintain the high conductivity of oil and gas, not only can increase the oil and gas production output, also can extend the oil and gas wellss length of service.
Our oil Proppant are divided according to the anti-crushing strength into 52Mpa (105KN), 69Mpa (140KN), and 86Mpa, (174KN) three series, according to bulk density are divided into: low-density, medium density, high-density. Product specifications are :12-18 mesh ,12-20 mesh ,16-20 mesh ,16-30 mesh, 20-40 mesh between 30-50 mesh, 40-60 mesh, 40-70 mesh and so on.
Specification
Bulk Density
(g/cm3)
Apparent Density
(g/cm3)
Close Pressure
(Mpa)
PERCENTAGE OF CRUSHING (%)
SPHERICITY ROUNDNESS
HIGH DENSITY
16MESH-30MESH
>1.80
>3.35
69
≤18.0
>0.8
HIGH DENSITY
20MESH-40MESH
>1.80
>3.35
69
≤5.0
>0.8
HIGH DENSITY
30MESH-50MESH
>1.80
>3.35
69
≤5.0
>0.8
MIDDLE DENSITY
16MESH-30MESH
≤1.80
≤3.35
69
≤18.0
>0.8
MIDDLE DENSITY
20MESH-40MESH
≤1.80
≤3.35
52
≤4.0
>0.8
MIDDLE DENSITY
30MESH-50MESH
≤1.80
≤3.35
69
≤6.0
>0.8
LOW DENSITY
30MESH-50MESH
1.63
2.71
52
4.83
>0.8
69
7.33
86
14.54
LOW DENSITY
40MESH-70MESH
1.62
2.70
52
3.98
>0.8
69
7.14
86
8.98
2.Good quality & competive price.
3.Widely used in the exporation of oil & gas wells.
Ceramic proppant is the key material in low-permeability fracturing of oil and gas wells exploration. This products used in the construction of deep well fracturing, be filled to the low permeability of the rock deposits in the cracks, fracturing close to the high oil recovery operations, so that oil and gas cracked rock, support for propping fractures not close because of releasing force, thereby to maintain the high conductivity of oil and gas, not only can increase the oil and gas production output, also can extend the oil and gas wellss length of service.
Our oil Proppant are divided according to the anti-crushing strength into 52Mpa (105KN), 69Mpa (140KN), and 86Mpa, (174KN) three series, according to bulk density are divided into: low-density, medium density, high-density. Product specifications are :12-18 mesh ,12-20 mesh ,16-20 mesh ,16-30 mesh, 20-40 mesh between 30-50 mesh, 40-60 mesh, 40-70 mesh and so on.
Specification
Bulk Density
(g/cm3)
Apparent Density
(g/cm3)
Close Pressure
(Mpa)
PERCENTAGE OF CRUSHING (%)
SPHERICITY ROUNDNESS
HIGH DENSITY
16MESH-30MESH
>1.80
>3.35
69
≤18.0
>0.8
HIGH DENSITY
20MESH-40MESH
>1.80
>3.35
69
≤5.0
>0.8
HIGH DENSITY
30MESH-50MESH
>1.80
>3.35
69
≤5.0
>0.8
MIDDLE DENSITY
16MESH-30MESH
≤1.80
≤3.35
69
≤18.0
>0.8
MIDDLE DENSITY
20MESH-40MESH
≤1.80
≤3.35
52
≤4.0
>0.8
MIDDLE DENSITY
30MESH-50MESH
≤1.80
≤3.35
69
≤6.0
>0.8
LOW DENSITY
30MESH-50MESH
1.63
2.71
52
4.83
>0.8
69
7.33
86
14.54
LOW DENSITY
40MESH-70MESH
1.62
2.70
52
3.98
>0.8
69
7.14
86
8.98
Oil Ceramic Proppant
We are directly manufacturer of Oil Ceramic Proppant , we have competitive price and good quality. Welcome to inquire!
Ceramic proppant is the key material in low-permeability fracturing of oil and gas wells exploration. This products used in the construction of deep well fracturing, be filled to the low permeability of the rock deposits in the cracks, fracturing close to the high oil recovery operations, so that oil and gas cracked rock, support for propping fractures not close because of releasing force, thereby to maintain the high conductivity of oil and gas, not only can increase the oil and gas production output, also can extend the oil and gas wellss length of service.
Our oil Proppant are divided according to the anti-crushing strength into 52Mpa (105KN), 69Mpa (140KN), and 86Mpa, (174KN) three series, according to bulk density are divided into: low-density, medium density, high-density. Product specifications are :12-18 mesh ,12-20 mesh ,16-20 mesh ,16-30 mesh, 20-40 mesh between 30-50 mesh, 40-60 mesh, 40-70 mesh and so on.
Specification
Bulk Density
(g/cm3)
Apparent Density
(g/cm3)
Close Pressure
(Mpa)
PERCENTAGE OF CRUSHING (%)
SPHERICITY ROUNDNESS
HIGH DENSITY
16MESH-30MESH
>1.80
>3.35
69
≤18.0
>0.8
HIGH DENSITY
20MESH-40MESH
>1.80
>3.35
69
≤5.0
>0.8
HIGH DENSITY
30MESH-50MESH
>1.80
>3.35
69
≤5.0
>0.8
MIDDLE DENSITY
16MESH-30MESH
≤1.80
≤3.35
69
≤18.0
>0.8
MIDDLE DENSITY
20MESH-40MESH
≤1.80
≤3.35
52
≤4.0
>0.8
MIDDLE DENSITY
30MESH-50MESH
≤1.80
≤3.35
69
≤6.0
>0.8
LOW DENSITY
30MESH-50MESH
1.63
2.71
52
4.83
>0.8
69
7.33
86
14.54
LOW DENSITY
40MESH-70MESH
1.62
2.70
52
3.98
>0.8
69
7.14
86
8.98
Ceramic proppant is the key material in low-permeability fracturing of oil and gas wells exploration. This products used in the construction of deep well fracturing, be filled to the low permeability of the rock deposits in the cracks, fracturing close to the high oil recovery operations, so that oil and gas cracked rock, support for propping fractures not close because of releasing force, thereby to maintain the high conductivity of oil and gas, not only can increase the oil and gas production output, also can extend the oil and gas wellss length of service.
Our oil Proppant are divided according to the anti-crushing strength into 52Mpa (105KN), 69Mpa (140KN), and 86Mpa, (174KN) three series, according to bulk density are divided into: low-density, medium density, high-density. Product specifications are :12-18 mesh ,12-20 mesh ,16-20 mesh ,16-30 mesh, 20-40 mesh between 30-50 mesh, 40-60 mesh, 40-70 mesh and so on.
Specification
Bulk Density
(g/cm3)
Apparent Density
(g/cm3)
Close Pressure
(Mpa)
PERCENTAGE OF CRUSHING (%)
SPHERICITY ROUNDNESS
HIGH DENSITY
16MESH-30MESH
>1.80
>3.35
69
≤18.0
>0.8
HIGH DENSITY
20MESH-40MESH
>1.80
>3.35
69
≤5.0
>0.8
HIGH DENSITY
30MESH-50MESH
>1.80
>3.35
69
≤5.0
>0.8
MIDDLE DENSITY
16MESH-30MESH
≤1.80
≤3.35
69
≤18.0
>0.8
MIDDLE DENSITY
20MESH-40MESH
≤1.80
≤3.35
52
≤4.0
>0.8
MIDDLE DENSITY
30MESH-50MESH
≤1.80
≤3.35
69
≤6.0
>0.8
LOW DENSITY
30MESH-50MESH
1.63
2.71
52
4.83
>0.8
69
7.33
86
14.54
LOW DENSITY
40MESH-70MESH
1.62
2.70
52
3.98
>0.8
69
7.14
86
8.98
Oil Drilling Grade Xanthan Gum, thicken drilling mud
Oil drilling xanthan gum
ISO certified company
Dispersible and non-dispersible grades
Large capacity
Product Description:
In oil industry, xanthan gum is used in large quantities, usually to thicken drilling mud. These fluids serve to carry the solids cut by the drilling bit back to the surface.
Xanthan gum provides great "low end" rheology. When the circulation stops, the solids still remain suspended in the drilling fluid. The widespread use of horizontal drilling and the demand for good control of drilled solids has led to the expanded use of xanthan gum.
Specification:
Items
Specs
Results
Appearance
Cream-white powder
conform
Particle Size (mesh)
Client need
40
Loss On Drying (%)
<13
12.2
Ashes (%)
≤13
8.75
Viscosity (1% KCL, cps)
>1200
1486
Shearing Ratio
≥6.0
7.78
PH
6.0-8.0
7.14
Rheologic Measurement:
Rate
600rpm
300rpm
200rpm
100rpm
6rpm
3rpm
standard
75-110
55-120
45-100
35-90
15-40
12.5-35
Results
89
69
56
44
18.5
15
ISO certified company
Dispersible and non-dispersible grades
Large capacity
Product Description:
In oil industry, xanthan gum is used in large quantities, usually to thicken drilling mud. These fluids serve to carry the solids cut by the drilling bit back to the surface.
Xanthan gum provides great "low end" rheology. When the circulation stops, the solids still remain suspended in the drilling fluid. The widespread use of horizontal drilling and the demand for good control of drilled solids has led to the expanded use of xanthan gum.
Specification:
Items
Specs
Results
Appearance
Cream-white powder
conform
Particle Size (mesh)
Client need
40
Loss On Drying (%)
<13
12.2
Ashes (%)
≤13
8.75
Viscosity (1% KCL, cps)
>1200
1486
Shearing Ratio
≥6.0
7.78
PH
6.0-8.0
7.14
Rheologic Measurement:
Rate
600rpm
300rpm
200rpm
100rpm
6rpm
3rpm
standard
75-110
55-120
45-100
35-90
15-40
12.5-35
Results
89
69
56
44
18.5
15
Oil Drilling Grade Xanthan Gum
Xanthan Gum
Oil drilling grade
Food grade
Medical/pharmaceutical grade
Product Description:
In oil industry, xanthan gum is used in large quantities, usually to thicken drilling mud. These fluids serve to carry the solids cut by the drilling bit back to the surface.
Xanthan gum provides great "low end" rheology. When the circulation stops, the solids still remain suspended in the drilling fluid. The widespread use of horizontal drilling and the demand for good control of drilled solids has led to the expanded use of xanthan gum.
Specification:
Items
Specs
Results
Appearance
Cream-white powder
conform
Particle Size (mesh)
Client need
40
Loss On Drying (%)
<13
12.2
Ashes (%)
≤13
8.75
Viscosity (1% KCL, cps)
>1200
1486
Shearing Ratio
≥6.0
7.78
PH
6.0-8.0
7.14
Rheologic Measurement:
Rate
600rpm
300rpm
200rpm
100rpm
6rpm
3rpm
standard
75-110
55-120
45-100
35-90
15-40
12.5-35
Results
89
69
56
44
18.5
15
Oil drilling grade
Food grade
Medical/pharmaceutical grade
Product Description:
In oil industry, xanthan gum is used in large quantities, usually to thicken drilling mud. These fluids serve to carry the solids cut by the drilling bit back to the surface.
Xanthan gum provides great "low end" rheology. When the circulation stops, the solids still remain suspended in the drilling fluid. The widespread use of horizontal drilling and the demand for good control of drilled solids has led to the expanded use of xanthan gum.
Specification:
Items
Specs
Results
Appearance
Cream-white powder
conform
Particle Size (mesh)
Client need
40
Loss On Drying (%)
<13
12.2
Ashes (%)
≤13
8.75
Viscosity (1% KCL, cps)
>1200
1486
Shearing Ratio
≥6.0
7.78
PH
6.0-8.0
7.14
Rheologic Measurement:
Rate
600rpm
300rpm
200rpm
100rpm
6rpm
3rpm
standard
75-110
55-120
45-100
35-90
15-40
12.5-35
Results
89
69
56
44
18.5
15
Oil Drilling Grade Xanthan Gum
Xanthan Gum
Oil drilling grade
Food grade
Medical/pharmaceutical grade
Product Description:
In oil industry, xanthan gum is used in large quantities, usually to thicken drilling mud. These fluids serve to carry the solids cut by the drilling bit back to the surface.
Xanthan gum provides great "low end" rheology. When the circulation stops, the solids still remain suspended in the drilling fluid. The widespread use of horizontal drilling and the demand for good control of drilled solids has led to the expanded use of xanthan gum.
Specification:
Items
Specs
Results
Appearance
Cream-white powder
conform
Particle Size (mesh)
Client need
40
Loss On Drying (%)
<13
12.2
Ashes (%)
≤13
8.75
Viscosity (1% KCL, cps)
>1200
1486
Shearing Ratio
≥6.0
7.78
PH
6.0-8.0
7.14
Rheologic Measurement:
Rate
600rpm
300rpm
200rpm
100rpm
6rpm
3rpm
standard
75-110
55-120
45-100
35-90
15-40
12.5-35
Results
89
69
56
44
18.5
15
Oil drilling grade
Food grade
Medical/pharmaceutical grade
Product Description:
In oil industry, xanthan gum is used in large quantities, usually to thicken drilling mud. These fluids serve to carry the solids cut by the drilling bit back to the surface.
Xanthan gum provides great "low end" rheology. When the circulation stops, the solids still remain suspended in the drilling fluid. The widespread use of horizontal drilling and the demand for good control of drilled solids has led to the expanded use of xanthan gum.
Specification:
Items
Specs
Results
Appearance
Cream-white powder
conform
Particle Size (mesh)
Client need
40
Loss On Drying (%)
<13
12.2
Ashes (%)
≤13
8.75
Viscosity (1% KCL, cps)
>1200
1486
Shearing Ratio
≥6.0
7.78
PH
6.0-8.0
7.14
Rheologic Measurement:
Rate
600rpm
300rpm
200rpm
100rpm
6rpm
3rpm
standard
75-110
55-120
45-100
35-90
15-40
12.5-35
Results
89
69
56
44
18.5
15
Oil Drum Heater(Very Popular)
Oil Drum Heater(Very Popular)
Certificate:CE
Material:Silicone Rubber
MOQ:1 PC
FOB Price:US$60.00---700.00
Oil Drum Heater(Very Popular) Description:
Name
Drum Heater 200Liter(MM)
Drum Heater 20Liter(MM)
Drum Heater 200Liter(MM)
Size
250*1740
200*860
125*1740
Capicity
120V 2000W
120V 800W
120V 1000KW
Weight
About 0.5KG
About 0.4KG
About 0.3KG
Certificate:CE
Material:Silicone Rubber
MOQ:1 PC
FOB Price:US$60.00---700.00
Oil Drum Heater(Very Popular) Description:
Name
Drum Heater 200Liter(MM)
Drum Heater 20Liter(MM)
Drum Heater 200Liter(MM)
Size
250*1740
200*860
125*1740
Capicity
120V 2000W
120V 800W
120V 1000KW
Weight
About 0.5KG
About 0.4KG
About 0.3KG
AN702/4,4'-METHYLENE BIS(2,6-DI-TERT-BUTYLPHENOL)/AT702/ADDITIVE/LUBRICANT ADDITIVE/LUBRICATING OIL ADDITIVE
metal passivator/metal deactivator/ deposit inhibitor
lubricating oil additive/plastic additive/rubber additive
AN702 4,4'-METHYLENE BIS(2,6-DI-TERT-BUTYLPHENOL) AT702
APPLICATION
AN702/4,4'-METHYLENE BIS(2,6-DI-TERT-BUTYLPHENOL) /antioxidant/AT702
metal passivator/metal deactivator/ deposit inhibitor
lubricating oil additive/plastic additive/rubber additive
engine motor oil/gear oil/antiwear hydraulic oil/turbine oil/fuel oil additive/lubricant additive,
Similar product:AN702/AT702/KY-7930
This additive has the same function with AN702/AT702/ KY-7930.
It is a white or pale yellow crystal, high molecular, phenolic hindered, ashless AO additive, widely added in cycling oil, engine oil, turbine oil, hydraulic pressure oil and transmission oil etc., to provide high temperature AO effect.
FEATURES
Excellent high temperature AO performance
Fine oil solubility
Good detergency
Low volatility
RECOMMENDED DOSAGE
0.5-1.0% in lubricant oil.
PACKING AND STORAGE
Packing: 200kgs/drum, 200 L steel drum or 20kgs/drum.
lubricating oil additive/plastic additive/rubber additive
AN702 4,4'-METHYLENE BIS(2,6-DI-TERT-BUTYLPHENOL) AT702
APPLICATION
AN702/4,4'-METHYLENE BIS(2,6-DI-TERT-BUTYLPHENOL) /antioxidant/AT702
metal passivator/metal deactivator/ deposit inhibitor
lubricating oil additive/plastic additive/rubber additive
engine motor oil/gear oil/antiwear hydraulic oil/turbine oil/fuel oil additive/lubricant additive,
Similar product:AN702/AT702/KY-7930
This additive has the same function with AN702/AT702/ KY-7930.
It is a white or pale yellow crystal, high molecular, phenolic hindered, ashless AO additive, widely added in cycling oil, engine oil, turbine oil, hydraulic pressure oil and transmission oil etc., to provide high temperature AO effect.
FEATURES
Excellent high temperature AO performance
Fine oil solubility
Good detergency
Low volatility
RECOMMENDED DOSAGE
0.5-1.0% in lubricant oil.
PACKING AND STORAGE
Packing: 200kgs/drum, 200 L steel drum or 20kgs/drum.
Oil Field Fracturing Proppant
1.High Strength.
2.Good quality & competive price.
3.Widely used in the exporation of oil & gas wells.
Ceramic proppant is the key material in low-permeability fracturing of oil and gas wells exploration. This products used in the construction of deep well fracturing, be filled to the low permeability of the rock deposits in the cracks, fracturing close to the high oil recovery operations, so that oil and gas cracked rock, support for propping fractures not close because of releasing force, thereby to maintain the high conductivity of oil and gas, not only can increase the oil and gas production output, also can extend the oil and gas wellss length of service.
Our oil Proppant are divided according to the anti-crushing strength into 52Mpa (105KN), 69Mpa (140KN), and 86Mpa, (174KN) three series, according to bulk density are divided into: low-density, medium density, high-density. Product specifications are :12-18 mesh ,12-20 mesh ,16-20 mesh ,16-30 mesh, 20-40 mesh between 30-50 mesh, 40-60 mesh, 40-70 mesh and so on.
Specification
Bulk Density
(g/cm3)
Apparent Density
(g/cm3)
Close Pressure
(Mpa)
PERCENTAGE OF CRUSHING (%)
SPHERICITY ROUNDNESS
HIGH DENSITY
16MESH-30MESH
>1.80
>3.35
69
≤18.0
>0.8
HIGH DENSITY
20MESH-40MESH
>1.80
>3.35
69
≤5.0
>0.8
HIGH DENSITY
30MESH-50MESH
>1.80
>3.35
69
≤5.0
>0.8
MIDDLE DENSITY
16MESH-30MESH
≤1.80
≤3.35
69
≤18.0
>0.8
MIDDLE DENSITY
20MESH-40MESH
≤1.80
≤3.35
52
≤4.0
>0.8
MIDDLE DENSITY
30MESH-50MESH
≤1.80
≤3.35
69
≤6.0
>0.8
LOW DENSITY
30MESH-50MESH
1.63
2.71
52
4.83
>0.8
69
7.33
86
14.54
LOW DENSITY
40MESH-70MESH
1.62
2.70
52
3.98
>0.8
69
7.14
86
8.98
2.Good quality & competive price.
3.Widely used in the exporation of oil & gas wells.
Ceramic proppant is the key material in low-permeability fracturing of oil and gas wells exploration. This products used in the construction of deep well fracturing, be filled to the low permeability of the rock deposits in the cracks, fracturing close to the high oil recovery operations, so that oil and gas cracked rock, support for propping fractures not close because of releasing force, thereby to maintain the high conductivity of oil and gas, not only can increase the oil and gas production output, also can extend the oil and gas wellss length of service.
Our oil Proppant are divided according to the anti-crushing strength into 52Mpa (105KN), 69Mpa (140KN), and 86Mpa, (174KN) three series, according to bulk density are divided into: low-density, medium density, high-density. Product specifications are :12-18 mesh ,12-20 mesh ,16-20 mesh ,16-30 mesh, 20-40 mesh between 30-50 mesh, 40-60 mesh, 40-70 mesh and so on.
Specification
Bulk Density
(g/cm3)
Apparent Density
(g/cm3)
Close Pressure
(Mpa)
PERCENTAGE OF CRUSHING (%)
SPHERICITY ROUNDNESS
HIGH DENSITY
16MESH-30MESH
>1.80
>3.35
69
≤18.0
>0.8
HIGH DENSITY
20MESH-40MESH
>1.80
>3.35
69
≤5.0
>0.8
HIGH DENSITY
30MESH-50MESH
>1.80
>3.35
69
≤5.0
>0.8
MIDDLE DENSITY
16MESH-30MESH
≤1.80
≤3.35
69
≤18.0
>0.8
MIDDLE DENSITY
20MESH-40MESH
≤1.80
≤3.35
52
≤4.0
>0.8
MIDDLE DENSITY
30MESH-50MESH
≤1.80
≤3.35
69
≤6.0
>0.8
LOW DENSITY
30MESH-50MESH
1.63
2.71
52
4.83
>0.8
69
7.33
86
14.54
LOW DENSITY
40MESH-70MESH
1.62
2.70
52
3.98
>0.8
69
7.14
86
8.98
Oil Fracking Ceramic Proppant
Ceramic proppant
1.High crush strength
2.High back proppant
3.High-ending technology
4.passed API RP19C
Xinmi Wanli Industry Development Co., LTD
is one of China's leading manufacturers who has owned patent technology in producing and exporting ceramic proppants used in the hydraulic fracturing process to increase the productivity of oil and gas wells.
1.
Brand Name:
Wanli®
2.
Type:
Fracturing Ceramic Proppant
3.
Place of Origin:
Henan, China (Mainland)
4.
Application:
Hydrolic fractruing
5.
Material:
Alumina Ceramic
6.
Density:
Light-weight, Medium Density, High Density
7.
Standards:
SY/T5108-2006, SY/T6302-1997
8.
Authentications:
ISO9001:2008
9.
Test Reports:
Stim-Lab test report, Frac-Tech laboratories test report, Ceramic Proppant Evaluation Lab in Langfang Branch of PetroChina
10.
Model Number:
20-40, 30-50, 40-70, etc
The ceramic proppant that are produced by
Wanli
is the necessities in oil (gas) hydraulic fracturing technology development and mining, and it plays a tremendous role in the increasing production in oil (gas) field.
Fracturing proppant can be widely used in hydraulic fracturing Wells, high-pressure oil layer fracturing. Base on high quality of Bauxite which are well grinding, mixed with various additive, then refined, granulation. According to the testing of Stim-Lab, Frac Tech Laboratory and Reservoir Stimulation Laboratory of RIPED-Langfang PetroChina, our products are all reached the standard of SY/T5108-2006, SY/T6302-1997, in the leading position of this industry.
Product categories:
By compression strength: 52MPa (7500psi), 69MPa (10000psi), 86MPa (12500psi), 103MPa (15000psi)
By volume density: low-density, medium-density and high-density.
By specification: 6-12 mesh, 8-16 mesh, 12-18 mesh, 12-20 mesh, 16-20 mesh, 16-30 mesh, 20-40 mesh, 30-50 mesh, 30-60 mesh, 40-60 mesh, 40-70 mesh, 70-140 mesh, etc.
Ceramic proppants of different specifications according to clients' specific requirements.
Web: www.proppantwl.com
Vedio URL: http://v.youku.com/v_show/id_XMjY0MTUwMDAw.html
Tel: +86-371-60126628
Fax: +86-371-60126629
We provide 24 hours service.
1.High crush strength
2.High back proppant
3.High-ending technology
4.passed API RP19C
Xinmi Wanli Industry Development Co., LTD
is one of China's leading manufacturers who has owned patent technology in producing and exporting ceramic proppants used in the hydraulic fracturing process to increase the productivity of oil and gas wells.
1.
Brand Name:
Wanli®
2.
Type:
Fracturing Ceramic Proppant
3.
Place of Origin:
Henan, China (Mainland)
4.
Application:
Hydrolic fractruing
5.
Material:
Alumina Ceramic
6.
Density:
Light-weight, Medium Density, High Density
7.
Standards:
SY/T5108-2006, SY/T6302-1997
8.
Authentications:
ISO9001:2008
9.
Test Reports:
Stim-Lab test report, Frac-Tech laboratories test report, Ceramic Proppant Evaluation Lab in Langfang Branch of PetroChina
10.
Model Number:
20-40, 30-50, 40-70, etc
The ceramic proppant that are produced by
Wanli
is the necessities in oil (gas) hydraulic fracturing technology development and mining, and it plays a tremendous role in the increasing production in oil (gas) field.
Fracturing proppant can be widely used in hydraulic fracturing Wells, high-pressure oil layer fracturing. Base on high quality of Bauxite which are well grinding, mixed with various additive, then refined, granulation. According to the testing of Stim-Lab, Frac Tech Laboratory and Reservoir Stimulation Laboratory of RIPED-Langfang PetroChina, our products are all reached the standard of SY/T5108-2006, SY/T6302-1997, in the leading position of this industry.
Product categories:
By compression strength: 52MPa (7500psi), 69MPa (10000psi), 86MPa (12500psi), 103MPa (15000psi)
By volume density: low-density, medium-density and high-density.
By specification: 6-12 mesh, 8-16 mesh, 12-18 mesh, 12-20 mesh, 16-20 mesh, 16-30 mesh, 20-40 mesh, 30-50 mesh, 30-60 mesh, 40-60 mesh, 40-70 mesh, 70-140 mesh, etc.
Ceramic proppants of different specifications according to clients' specific requirements.
Web: www.proppantwl.com
Vedio URL: http://v.youku.com/v_show/id_XMjY0MTUwMDAw.html
Tel: +86-371-60126628
Fax: +86-371-60126629
We provide 24 hours service.
Oil Fracture Ceramic Proppant
1.A specialized factory
2.High technology
3.High conductivity
4.High crusing strength
1.Product introduction:
Oil fracturing proppant is one kind of ceramic particle product with high intensity resistance, mainly used for underground support to increase production of oil and gas.
The main raw materials of oil fracturing proppant are hig quality bauxite, coal etc. By ceramic sintering processing, oil fracturing proppant is a perfect substitute of natural quartz sand, glass ball, metal ball ect such low intensity materials, has good effect in increasing output of oil and natural gas.
When deep drilling Oil and natural gas, ore deposit has been fractured by the high pressure and low permeability. Oil and gas spew out from the rock bursted of cracks, the cracks would not close due to the stress release when high aluminium support materials with high pressure solution has been filled into the cracks of rock fissured, and so as to maintain high flow conductivity, and keep the high output of oil and gas. It has been proved by experience that it could improve the yield 30-50% by using oil fracturing proppant, and can also prolong service life of oil well, it’s the key material in low permeability oil deposit exploitation and construction.
2.Usage
It is mainly used for supporting fissure of stratum fracturing transformation of deep oil and gas field.
Enhance permeability of stratum Circulate oil gas .
Increase output of oil gas
3.Type
size
properties
20/40
30/50
Apprant density (g/m3)
3.21
3.28
Bulk density(g/m3)
1.79
1.80
Sphericity
≥0.80
≥0.80
Roundness
≥0.80
≥0.80
Turbility FTU
≤100
≤100
Acid Solubility
≤8
≤8
crush
52Mp
69Mp
5.36
2.45
We mainly produce the type 20/40 and 30/50.If you have other kind of type,we would like to meet your need.
4.Factory
We owed a specialized factory for producing the oil fracture proppant.This not only may simplify the middle link,but also quarantee the quality.
We have supplied our products for many company.They are quiet satisfied with our quality.So I believe we can meet or exceed your quality requirements.
Choose us, you will get the unexpected effect.
2.High technology
3.High conductivity
4.High crusing strength
1.Product introduction:
Oil fracturing proppant is one kind of ceramic particle product with high intensity resistance, mainly used for underground support to increase production of oil and gas.
The main raw materials of oil fracturing proppant are hig quality bauxite, coal etc. By ceramic sintering processing, oil fracturing proppant is a perfect substitute of natural quartz sand, glass ball, metal ball ect such low intensity materials, has good effect in increasing output of oil and natural gas.
When deep drilling Oil and natural gas, ore deposit has been fractured by the high pressure and low permeability. Oil and gas spew out from the rock bursted of cracks, the cracks would not close due to the stress release when high aluminium support materials with high pressure solution has been filled into the cracks of rock fissured, and so as to maintain high flow conductivity, and keep the high output of oil and gas. It has been proved by experience that it could improve the yield 30-50% by using oil fracturing proppant, and can also prolong service life of oil well, it’s the key material in low permeability oil deposit exploitation and construction.
2.Usage
It is mainly used for supporting fissure of stratum fracturing transformation of deep oil and gas field.
Enhance permeability of stratum Circulate oil gas .
Increase output of oil gas
3.Type
size
properties
20/40
30/50
Apprant density (g/m3)
3.21
3.28
Bulk density(g/m3)
1.79
1.80
Sphericity
≥0.80
≥0.80
Roundness
≥0.80
≥0.80
Turbility FTU
≤100
≤100
Acid Solubility
≤8
≤8
crush
52Mp
69Mp
5.36
2.45
We mainly produce the type 20/40 and 30/50.If you have other kind of type,we would like to meet your need.
4.Factory
We owed a specialized factory for producing the oil fracture proppant.This not only may simplify the middle link,but also quarantee the quality.
We have supplied our products for many company.They are quiet satisfied with our quality.So I believe we can meet or exceed your quality requirements.
Choose us, you will get the unexpected effect.
Oil Fracture Proppant
1.High Strength.
2.Good quality & competive price.
3.Widely used in the exporation of oil & gas wells.
Ceramic proppant is the key material in low-permeability fracturing of oil and gas wells exploration. This products used in the construction of deep well fracturing, be filled to the low permeability of the rock deposits in the cracks, fracturing close to the high oil recovery operations, so that oil and gas cracked rock, support for propping fractures not close because of releasing force, thereby to maintain the high conductivity of oil and gas, not only can increase the oil and gas production output, also can extend the oil and gas wellss length of service.
Our oil Proppant are divided according to the anti-crushing strength into 52Mpa (105KN), 69Mpa (140KN), and 86Mpa, (174KN) three series, according to bulk density are divided into: low-density, medium density, high-density. Product specifications are :12-18 mesh ,12-20 mesh ,16-20 mesh ,16-30 mesh, 20-40 mesh between 30-50 mesh, 40-60 mesh, 40-70 mesh and so on.
Specification
Bulk Density
(g/cm3)
Apparent Density
(g/cm3)
Close Pressure
(Mpa)
PERCENTAGE OF CRUSHING (%)
SPHERICITY ROUNDNESS
HIGH DENSITY
16MESH-30MESH
>1.80
>3.35
69
≤18.0
>0.8
HIGH DENSITY
20MESH-40MESH
>1.80
>3.35
69
≤5.0
>0.8
HIGH DENSITY
30MESH-50MESH
>1.80
>3.35
69
≤5.0
>0.8
MIDDLE DENSITY
16MESH-30MESH
≤1.80
≤3.35
69
≤18.0
>0.8
MIDDLE DENSITY
20MESH-40MESH
≤1.80
≤3.35
52
≤4.0
>0.8
MIDDLE DENSITY
30MESH-50MESH
≤1.80
≤3.35
69
≤6.0
>0.8
LOW DENSITY
30MESH-50MESH
1.63
2.71
52
4.83
>0.8
69
7.33
86
14.54
LOW DENSITY
40MESH-70MESH
1.62
2.70
52
3.98
>0.8
69
7.14
86
8.98
2.Good quality & competive price.
3.Widely used in the exporation of oil & gas wells.
Ceramic proppant is the key material in low-permeability fracturing of oil and gas wells exploration. This products used in the construction of deep well fracturing, be filled to the low permeability of the rock deposits in the cracks, fracturing close to the high oil recovery operations, so that oil and gas cracked rock, support for propping fractures not close because of releasing force, thereby to maintain the high conductivity of oil and gas, not only can increase the oil and gas production output, also can extend the oil and gas wellss length of service.
Our oil Proppant are divided according to the anti-crushing strength into 52Mpa (105KN), 69Mpa (140KN), and 86Mpa, (174KN) three series, according to bulk density are divided into: low-density, medium density, high-density. Product specifications are :12-18 mesh ,12-20 mesh ,16-20 mesh ,16-30 mesh, 20-40 mesh between 30-50 mesh, 40-60 mesh, 40-70 mesh and so on.
Specification
Bulk Density
(g/cm3)
Apparent Density
(g/cm3)
Close Pressure
(Mpa)
PERCENTAGE OF CRUSHING (%)
SPHERICITY ROUNDNESS
HIGH DENSITY
16MESH-30MESH
>1.80
>3.35
69
≤18.0
>0.8
HIGH DENSITY
20MESH-40MESH
>1.80
>3.35
69
≤5.0
>0.8
HIGH DENSITY
30MESH-50MESH
>1.80
>3.35
69
≤5.0
>0.8
MIDDLE DENSITY
16MESH-30MESH
≤1.80
≤3.35
69
≤18.0
>0.8
MIDDLE DENSITY
20MESH-40MESH
≤1.80
≤3.35
52
≤4.0
>0.8
MIDDLE DENSITY
30MESH-50MESH
≤1.80
≤3.35
69
≤6.0
>0.8
LOW DENSITY
30MESH-50MESH
1.63
2.71
52
4.83
>0.8
69
7.33
86
14.54
LOW DENSITY
40MESH-70MESH
1.62
2.70
52
3.98
>0.8
69
7.14
86
8.98
Subscribe to:
Posts (Atom)