Specialty for wind charger
1.Anti-wear & self-repair
2.Increase power
3.Eco-friendly
4. Particle size<20nm
1) Product Introduction
“Dunba Nano Energy-saving & Maintaining Fluid for Wind Charger” is a fuel-saving environmental friendly product composed of nano-alloy and monomer and multifunctional additives, produced by technical equipment with our own intellectual property rights (Patent No. ZL200810032849.1) and new scientific and technological achievement by China 863 high-tech Project. This product not only has strong lubrication and self-repair function, but also excellent anti-wear
,
anti-oxidation & extreme pressure performance.
The products are mainly suitable for mining, electrical power, steel, petroleum, construction, transportation etc. large and medium-sized machinery equipment; these equipments are working in the long-term high-temperature, low temperature, high pressure, high strength, and high work load conditions. Also, because of less good maintenance for a long time, so as to cause serious wear and metal fatigue. Not only the work efficiency is reduced, and energy consumption increased, but also the cost is increased. In this regards, nano active repair factor is added in the products, then can effectively repair wear and the loss caused by metal fatigue; super-hard and ultra-lubricating layer formed has an effective protection and lubrication for frictional pair surface, and can speed up the cooling, extend equipment life, reduce maintenance costs, restore efficiency, produce safety, increase economic benefit.
2) Mechanism of Action
1, DUNBA nano energy-saving & maintenance fluid contains nano-particles by surface modification, under boundary lubrication conditions,the friction produces “mechanical energy”. In the effect of mechanical energy, the defect on friction pair surface are increased, peels out the fresh active metal surface, stimulates out the exo electrons, forms high-intensity electric field and produce transient high temperature and high pressure. This phenomenon can fully decompose nano surface modification agents, even make nano-cores broken, and decompose for inorganic clusters and small organic small molecule legends called active factors.
2, Active factor can easily produce physical and chemical effect with the friction pair surface of high activity and quickly permeate in the micro-defects of the metal friction surface and rapidly repair the worn parts and form super-smooth friction surface, and so reduces the friction coefficient.
3, Permeation process occurs in original position accompanied by friction pair boundary contact. If the penetration rate is just same with wear rate, then wear is offset dynamically, thereby produce the function of
self-repair and maintenance for operation position.
4, Dissociative modifier is usually an organic ligands containing active elements, but also can play the role of anti-wear extreme pressure, and often collaborate with nanometer-core and monomer.
So this product has the functions of anti-wear, friction reduction, extreme pressure resistance, self-repair etc. According to the law of energy conservation, if the consumed power by friction reduces, accordingly the output power will be improved. Thereby working efficiency of equipment is improved to achieve the purpose of energy-saving, cooling, noise reduction, extended life and reducing maintenance costs.
3) Product Features
1), Repair wear and tear, 80% -90% of scuffing surface, extend equipment life, effectively reduce the heavy repair costs;
2), Excellent carrying capacity, protect the equipment under extreme pressure conditions, and make the wear and tear drop to the minimum;.
3), Good thermal stability, strong oxidation resistance, able to reduce the production of various types of oxides;
4), Soluble in a variety of lubricating oil, don’t change the nature of the original lubricant;
5), Cooling, noise reduction, vibration reduction, prevention fault generation, reduce the mechanical incidents;
6), 5% -30% energy savings.
4) Product application
The product is easy to stably disperse in a variety of lubricating oil, suitable for solving the energy saving and maintenance problem of diverse power,machinery equipments on steel, oil field, mining, cement, electrical power and other industries, as well as on trains, ships and other large transport industries.
5) Usage
This product is mixed evenly in accordance with the amount of 1% of total lubricating oil, and then added to the lubrication system of equipment.
6
)
Notice
1),Noninflammable, in explosive, in corrosive;
2),Don’t drink and avoid long time skin contact;
3),Protect from impurity and water;
4),Keep in normal temperature and avoid sunlight.
Saturday, June 11, 2011
Nano energy-saving & anti-wear additive for wind pump
Nano energy-saving
1.Anti-wear & self-repair
2.Increase power
3.Eco-friendly
4. Particle size<20nm
1) Product Introduction
“Dunba Nano Energy-saving & Maintaining Fluid for Wind Turbines” is a fuel-saving environmental friendly product composed of nano-alloy and monomer and multifunctional additives, produced by technical equipment with our own intellectual property rights (Patent No. ZL200810032849.1) and new scientific and technological achievement by China 863 high-tech Project. This product not only has strong lubrication and self-repair function, but also excellent anti-wear
,
anti-oxidation & extreme pressure performance.
The products are mainly suitable for mining, electrical power, steel, petroleum, construction, transportation etc. large and medium-sized machinery equipment; these equipments are working in the long-term high-temperature, low temperature, high pressure, high strength, and high work load conditions. Also, because of less good maintenance for a long time, so as to cause serious wear and metal fatigue. Not only the work efficiency is reduced, and energy consumption increased, but also the cost is increased. In this regards, nano active repair factor is added in the products, then can effectively repair wear and the loss caused by metal fatigue; super-hard and ultra-lubricating layer formed has an effective protection and lubrication for frictional pair surface, and can speed up the cooling, extend equipment life, reduce maintenance costs, restore efficiency, produce safety, increase economic benefit.
2) Mechanism of Action
1, DUNBA nano energy-saving & maintenance fluid contains nano-particles by surface modification, under boundary lubrication conditions,the friction produces “mechanical energy”. In the effect of mechanical energy, the defect on friction pair surface are increased, peels out the fresh active metal surface, stimulates out the exo electrons, forms high-intensity electric field and produce transient high temperature and high pressure. This phenomenon can fully decompose nano surface modification agents, even make nano-cores broken, and decompose for inorganic clusters and small organic small molecule legends called active factors.
2, Active factor can easily produce physical and chemical effect with the friction pair surface of high activity and quickly permeate in the micro-defects of the metal friction surface and rapidly repair the worn parts and form super-smooth friction surface, and so reduces the friction coefficient.
3, Permeation process occurs in original position accompanied by friction pair boundary contact. If the penetration rate is just same with wear rate, then wear is offset dynamically, thereby produce the function of
self-repair and maintenance for operation position.
4, Dissociative modifier is usually an organic ligands containing active elements, but also can play the role of anti-wear extreme pressure, and often collaborate with nanometer-core and monomer.
So this product has the functions of anti-wear, friction reduction, extreme pressure resistance, self-repair etc. According to the law of energy conservation, if the consumed power by friction reduces, accordingly the output power will be improved. Thereby working efficiency of equipment is improved to achieve the purpose of energy-saving, cooling, noise reduction, extended life and reducing maintenance costs.
3) Product Features
1), Repair wear and tear, 80% -90% of scuffing surface, extend equipment life, effectively reduce the heavy repair costs;
2), Excellent carrying capacity, protect the equipment under extreme pressure conditions, and make the wear and tear drop to the minimum;.
3), Good thermal stability, strong oxidation resistance, able to reduce the production of various types of oxides;
4), Soluble in a variety of lubricating oil, don’t change the nature of the original lubricant;
5), Cooling, noise reduction, vibration reduction, prevention fault generation, reduce the mechanical incidents;
6), 5% -30% energy savings.
4) Product application
The product is easy to stably disperse in a variety of lubricating oil, suitable for solving the energy saving and maintenance problem of diverse power,machinery equipments on steel, oil field, mining, cement, electrical power and other industries, as well as on trains, ships and other large transport industries.
5) Usage
This product is mixed evenly in accordance with the amount of 1% of total lubricating oil, and then added to the lubrication system of equipment.
6
)
Notice
1),Noninflammable, in explosive, in corrosive;
2),Don’t drink and avoid long time skin contact;
3),Protect from impurity and water;
4),Keep in normal temperature and avoid sunlight.
1.Anti-wear & self-repair
2.Increase power
3.Eco-friendly
4. Particle size<20nm
1) Product Introduction
“Dunba Nano Energy-saving & Maintaining Fluid for Wind Turbines” is a fuel-saving environmental friendly product composed of nano-alloy and monomer and multifunctional additives, produced by technical equipment with our own intellectual property rights (Patent No. ZL200810032849.1) and new scientific and technological achievement by China 863 high-tech Project. This product not only has strong lubrication and self-repair function, but also excellent anti-wear
,
anti-oxidation & extreme pressure performance.
The products are mainly suitable for mining, electrical power, steel, petroleum, construction, transportation etc. large and medium-sized machinery equipment; these equipments are working in the long-term high-temperature, low temperature, high pressure, high strength, and high work load conditions. Also, because of less good maintenance for a long time, so as to cause serious wear and metal fatigue. Not only the work efficiency is reduced, and energy consumption increased, but also the cost is increased. In this regards, nano active repair factor is added in the products, then can effectively repair wear and the loss caused by metal fatigue; super-hard and ultra-lubricating layer formed has an effective protection and lubrication for frictional pair surface, and can speed up the cooling, extend equipment life, reduce maintenance costs, restore efficiency, produce safety, increase economic benefit.
2) Mechanism of Action
1, DUNBA nano energy-saving & maintenance fluid contains nano-particles by surface modification, under boundary lubrication conditions,the friction produces “mechanical energy”. In the effect of mechanical energy, the defect on friction pair surface are increased, peels out the fresh active metal surface, stimulates out the exo electrons, forms high-intensity electric field and produce transient high temperature and high pressure. This phenomenon can fully decompose nano surface modification agents, even make nano-cores broken, and decompose for inorganic clusters and small organic small molecule legends called active factors.
2, Active factor can easily produce physical and chemical effect with the friction pair surface of high activity and quickly permeate in the micro-defects of the metal friction surface and rapidly repair the worn parts and form super-smooth friction surface, and so reduces the friction coefficient.
3, Permeation process occurs in original position accompanied by friction pair boundary contact. If the penetration rate is just same with wear rate, then wear is offset dynamically, thereby produce the function of
self-repair and maintenance for operation position.
4, Dissociative modifier is usually an organic ligands containing active elements, but also can play the role of anti-wear extreme pressure, and often collaborate with nanometer-core and monomer.
So this product has the functions of anti-wear, friction reduction, extreme pressure resistance, self-repair etc. According to the law of energy conservation, if the consumed power by friction reduces, accordingly the output power will be improved. Thereby working efficiency of equipment is improved to achieve the purpose of energy-saving, cooling, noise reduction, extended life and reducing maintenance costs.
3) Product Features
1), Repair wear and tear, 80% -90% of scuffing surface, extend equipment life, effectively reduce the heavy repair costs;
2), Excellent carrying capacity, protect the equipment under extreme pressure conditions, and make the wear and tear drop to the minimum;.
3), Good thermal stability, strong oxidation resistance, able to reduce the production of various types of oxides;
4), Soluble in a variety of lubricating oil, don’t change the nature of the original lubricant;
5), Cooling, noise reduction, vibration reduction, prevention fault generation, reduce the mechanical incidents;
6), 5% -30% energy savings.
4) Product application
The product is easy to stably disperse in a variety of lubricating oil, suitable for solving the energy saving and maintenance problem of diverse power,machinery equipments on steel, oil field, mining, cement, electrical power and other industries, as well as on trains, ships and other large transport industries.
5) Usage
This product is mixed evenly in accordance with the amount of 1% of total lubricating oil, and then added to the lubrication system of equipment.
6
)
Notice
1),Noninflammable, in explosive, in corrosive;
2),Don’t drink and avoid long time skin contact;
3),Protect from impurity and water;
4),Keep in normal temperature and avoid sunlight.
Nano energy-saving & anti-wear additive for windmill
Specialty for windmill
1.Anti-wear & self-repair
2.Increase power
3.Eco-friendly
4. Particle size<20nm
1) Product Introduction
“Dunba Nano Energy-saving & Maintaining Fluid for Windmill” is a fuel-saving environmental friendly product composed of nano-alloy and monomer and multifunctional additives, produced by technical equipment with our own intellectual property rights (Patent No. ZL200810032849.1) and new scientific and technological achievement by China 863 high-tech Project. This product not only has strong lubrication and self-repair function, but also excellent anti-wear
,
anti-oxidation & extreme pressure performance.
The products are mainly suitable for mining, electrical power, steel, petroleum, construction, transportation etc. large and medium-sized machinery equipment; these equipments are working in the long-term high-temperature, low temperature, high pressure, high strength, and high work load conditions. Also, because of less good maintenance for a long time, so as to cause serious wear and metal fatigue. Not only the work efficiency is reduced, and energy consumption increased, but also the cost is increased. In this regards, nano active repair factor is added in the products, then can effectively repair wear and the loss caused by metal fatigue; super-hard and ultra-lubricating layer formed has an effective protection and lubrication for frictional pair surface, and can speed up the cooling, extend equipment life, reduce maintenance costs, restore efficiency, produce safety, increase economic benefit.
2) Mechanism of Action
1, DUNBA nano energy-saving & maintenance fluid contains nano-particles by surface modification, under boundary lubrication conditions,the friction produces “mechanical energy”. In the effect of mechanical energy, the defect on friction pair surface are increased, peels out the fresh active metal surface, stimulates out the exo electrons, forms high-intensity electric field and produce transient high temperature and high pressure. This phenomenon can fully decompose nano surface modification agents, even make nano-cores broken, and decompose for inorganic clusters and small organic small molecule legends called active factors.
2, Active factor can easily produce physical and chemical effect with the friction pair surface of high activity and quickly permeate in the micro-defects of the metal friction surface and rapidly repair the worn parts and form super-smooth friction surface, and so reduces the friction coefficient.
3, Permeation process occurs in original position accompanied by friction pair boundary contact. If the penetration rate is just same with wear rate, then wear is offset dynamically, thereby produce the function of
self-repair and maintenance for operation position.
4, Dissociative modifier is usually an organic ligands containing active elements, but also can play the role of anti-wear extreme pressure, and often collaborate with nanometer-core and monomer.
So this product has the functions of anti-wear, friction reduction, extreme pressure resistance, self-repair etc. According to the law of energy conservation, if the consumed power by friction reduces, accordingly the output power will be improved. Thereby working efficiency of equipment is improved to achieve the purpose of energy-saving, cooling, noise reduction, extended life and reducing maintenance costs.
3) Product Features
1), Repair wear and tear, 80% -90% of scuffing surface, extend equipment life, effectively reduce the heavy repair costs;
2), Excellent carrying capacity, protect the equipment under extreme pressure conditions, and make the wear and tear drop to the minimum;.
3), Good thermal stability, strong oxidation resistance, able to reduce the production of various types of oxides;
4), Soluble in a variety of lubricating oil, don’t change the nature of the original lubricant;
5), Cooling, noise reduction, vibration reduction, prevention fault generation, reduce the mechanical incidents;
6), 5% -30% energy savings.
4) Product application
The product is easy to stably disperse in a variety of lubricating oil, suitable for solving the energy saving and maintenance problem of diverse power,machinery equipments on steel, oil field, mining, cement, electrical power and other industries, as well as on trains, ships and other large transport industries.
5) Usage
This product is mixed evenly in accordance with the amount of 1% of total lubricating oil, and then added to the lubrication system of equipment.
6
)
Notice
1),Noninflammable, in explosive, in corrosive;
2),Don’t drink and avoid long time skin contact;
3),Protect from impurity and water;
4),Keep in normal temperature and avoid sunlight.
W
1.Anti-wear & self-repair
2.Increase power
3.Eco-friendly
4. Particle size<20nm
1) Product Introduction
“Dunba Nano Energy-saving & Maintaining Fluid for Windmill” is a fuel-saving environmental friendly product composed of nano-alloy and monomer and multifunctional additives, produced by technical equipment with our own intellectual property rights (Patent No. ZL200810032849.1) and new scientific and technological achievement by China 863 high-tech Project. This product not only has strong lubrication and self-repair function, but also excellent anti-wear
,
anti-oxidation & extreme pressure performance.
The products are mainly suitable for mining, electrical power, steel, petroleum, construction, transportation etc. large and medium-sized machinery equipment; these equipments are working in the long-term high-temperature, low temperature, high pressure, high strength, and high work load conditions. Also, because of less good maintenance for a long time, so as to cause serious wear and metal fatigue. Not only the work efficiency is reduced, and energy consumption increased, but also the cost is increased. In this regards, nano active repair factor is added in the products, then can effectively repair wear and the loss caused by metal fatigue; super-hard and ultra-lubricating layer formed has an effective protection and lubrication for frictional pair surface, and can speed up the cooling, extend equipment life, reduce maintenance costs, restore efficiency, produce safety, increase economic benefit.
2) Mechanism of Action
1, DUNBA nano energy-saving & maintenance fluid contains nano-particles by surface modification, under boundary lubrication conditions,the friction produces “mechanical energy”. In the effect of mechanical energy, the defect on friction pair surface are increased, peels out the fresh active metal surface, stimulates out the exo electrons, forms high-intensity electric field and produce transient high temperature and high pressure. This phenomenon can fully decompose nano surface modification agents, even make nano-cores broken, and decompose for inorganic clusters and small organic small molecule legends called active factors.
2, Active factor can easily produce physical and chemical effect with the friction pair surface of high activity and quickly permeate in the micro-defects of the metal friction surface and rapidly repair the worn parts and form super-smooth friction surface, and so reduces the friction coefficient.
3, Permeation process occurs in original position accompanied by friction pair boundary contact. If the penetration rate is just same with wear rate, then wear is offset dynamically, thereby produce the function of
self-repair and maintenance for operation position.
4, Dissociative modifier is usually an organic ligands containing active elements, but also can play the role of anti-wear extreme pressure, and often collaborate with nanometer-core and monomer.
So this product has the functions of anti-wear, friction reduction, extreme pressure resistance, self-repair etc. According to the law of energy conservation, if the consumed power by friction reduces, accordingly the output power will be improved. Thereby working efficiency of equipment is improved to achieve the purpose of energy-saving, cooling, noise reduction, extended life and reducing maintenance costs.
3) Product Features
1), Repair wear and tear, 80% -90% of scuffing surface, extend equipment life, effectively reduce the heavy repair costs;
2), Excellent carrying capacity, protect the equipment under extreme pressure conditions, and make the wear and tear drop to the minimum;.
3), Good thermal stability, strong oxidation resistance, able to reduce the production of various types of oxides;
4), Soluble in a variety of lubricating oil, don’t change the nature of the original lubricant;
5), Cooling, noise reduction, vibration reduction, prevention fault generation, reduce the mechanical incidents;
6), 5% -30% energy savings.
4) Product application
The product is easy to stably disperse in a variety of lubricating oil, suitable for solving the energy saving and maintenance problem of diverse power,machinery equipments on steel, oil field, mining, cement, electrical power and other industries, as well as on trains, ships and other large transport industries.
5) Usage
This product is mixed evenly in accordance with the amount of 1% of total lubricating oil, and then added to the lubrication system of equipment.
6
)
Notice
1),Noninflammable, in explosive, in corrosive;
2),Don’t drink and avoid long time skin contact;
3),Protect from impurity and water;
4),Keep in normal temperature and avoid sunlight.
W
Nano energy-saving & maintaining fluid for Horizontal-axis wind turbines (HAWT)
Specialty for Wind Turbine
1.Anti-wear & self-repair
2.Increase power
3.Eco-friendly
4. Particle size<20nm
1) Product Introduction
“Dunba Nano Energy-saving & Maintaining Fluid for Wind Turbines” is a fuel-saving environmental friendly product composed of nano-alloy and monomer and multifunctional additives, produced by technical equipment with our own intellectual property rights (Patent No. ZL200810032849.1) and new scientific and technological achievement by China 863 high-tech Project. This product not only has strong lubrication and self-repair function, but also excellent anti-wear
,
anti-oxidation & extreme pressure performance.
The products are mainly suitable for mining, electrical power, steel, petroleum, construction, transportation etc. large and medium-sized machinery equipment; these equipments are working in the long-term high-temperature, low temperature, high pressure, high strength, and high work load conditions. Also, because of less good maintenance for a long time, so as to cause serious wear and metal fatigue. Not only the work efficiency is reduced, and energy consumption increased, but also the cost is increased. In this regards, nano active repair factor is added in the products, then can effectively repair wear and the loss caused by metal fatigue; super-hard and ultra-lubricating layer formed has an effective protection and lubrication for frictional pair surface, and can speed up the cooling, extend equipment life, reduce maintenance costs, restore efficiency, produce safety, increase economic benefit.
2) Mechanism of Action
1, DUNBA nano energy-saving & maintenance fluid contains nano-particles by surface modification, under boundary lubrication conditions,the friction produces “mechanical energy”. In the effect of mechanical energy, the defect on friction pair surface are increased, peels out the fresh active metal surface, stimulates out the exo electrons, forms high-intensity electric field and produce transient high temperature and high pressure. This phenomenon can fully decompose nano surface modification agents, even make nano-cores broken, and decompose for inorganic clusters and small organic small molecule legends called active factors.
2, Active factor can easily produce physical and chemical effect with the friction pair surface of high activity and quickly permeate in the micro-defects of the metal friction surface and rapidly repair the worn parts and form super-smooth friction surface, and so reduces the friction coefficient.
3, Permeation process occurs in original position accompanied by friction pair boundary contact. If the penetration rate is just same with wear rate, then wear is offset dynamically, thereby produce the function of
self-repair and maintenance for operation position.
4, Dissociative modifier is usually an organic ligands containing active elements, but also can play the role of anti-wear extreme pressure, and often collaborate with nanometer-core and monomer.
So this product has the functions of anti-wear, friction reduction, extreme pressure resistance, self-repair etc. According to the law of energy conservation, if the consumed power by friction reduces, accordingly the output power will be improved. Thereby working efficiency of equipment is improved to achieve the purpose of energy-saving, cooling, noise reduction, extended life and reducing maintenance costs.
3) Product Features
1), Repair wear and tear, 80% -90% of scuffing surface, extend equipment life, effectively reduce the heavy repair costs;
2), Excellent carrying capacity, protect the equipment under extreme pressure conditions, and make the wear and tear drop to the minimum;.
3), Good thermal stability, strong oxidation resistance, able to reduce the production of various types of oxides;
4), Soluble in a variety of lubricating oil, don’t change the nature of the original lubricant;
5), Cooling, noise reduction, vibration reduction, prevention fault generation, reduce the mechanical incidents;
6), 5% -30% energy savings.
4) Product application
The product is easy to stably disperse in a variety of lubricating oil, suitable for solving the energy saving and maintenance problem of diverse power,machinery equipments on steel, oil field, mining, cement, electrical power and other industries, as well as on trains, ships and other large transport industries.
5) Usage
This product is mixed evenly in accordance with the amount of 1% of total lubricating oil, and then added to the lubrication system of equipment.
6
)
Notice
1),Noninflammable, in explosive, in corrosive;
2),Don’t drink and avoid long time skin contact;
3),Protect from impurity and water;
4),Keep in normal temperature and avoid sunlight.
1.Anti-wear & self-repair
2.Increase power
3.Eco-friendly
4. Particle size<20nm
1) Product Introduction
“Dunba Nano Energy-saving & Maintaining Fluid for Wind Turbines” is a fuel-saving environmental friendly product composed of nano-alloy and monomer and multifunctional additives, produced by technical equipment with our own intellectual property rights (Patent No. ZL200810032849.1) and new scientific and technological achievement by China 863 high-tech Project. This product not only has strong lubrication and self-repair function, but also excellent anti-wear
,
anti-oxidation & extreme pressure performance.
The products are mainly suitable for mining, electrical power, steel, petroleum, construction, transportation etc. large and medium-sized machinery equipment; these equipments are working in the long-term high-temperature, low temperature, high pressure, high strength, and high work load conditions. Also, because of less good maintenance for a long time, so as to cause serious wear and metal fatigue. Not only the work efficiency is reduced, and energy consumption increased, but also the cost is increased. In this regards, nano active repair factor is added in the products, then can effectively repair wear and the loss caused by metal fatigue; super-hard and ultra-lubricating layer formed has an effective protection and lubrication for frictional pair surface, and can speed up the cooling, extend equipment life, reduce maintenance costs, restore efficiency, produce safety, increase economic benefit.
2) Mechanism of Action
1, DUNBA nano energy-saving & maintenance fluid contains nano-particles by surface modification, under boundary lubrication conditions,the friction produces “mechanical energy”. In the effect of mechanical energy, the defect on friction pair surface are increased, peels out the fresh active metal surface, stimulates out the exo electrons, forms high-intensity electric field and produce transient high temperature and high pressure. This phenomenon can fully decompose nano surface modification agents, even make nano-cores broken, and decompose for inorganic clusters and small organic small molecule legends called active factors.
2, Active factor can easily produce physical and chemical effect with the friction pair surface of high activity and quickly permeate in the micro-defects of the metal friction surface and rapidly repair the worn parts and form super-smooth friction surface, and so reduces the friction coefficient.
3, Permeation process occurs in original position accompanied by friction pair boundary contact. If the penetration rate is just same with wear rate, then wear is offset dynamically, thereby produce the function of
self-repair and maintenance for operation position.
4, Dissociative modifier is usually an organic ligands containing active elements, but also can play the role of anti-wear extreme pressure, and often collaborate with nanometer-core and monomer.
So this product has the functions of anti-wear, friction reduction, extreme pressure resistance, self-repair etc. According to the law of energy conservation, if the consumed power by friction reduces, accordingly the output power will be improved. Thereby working efficiency of equipment is improved to achieve the purpose of energy-saving, cooling, noise reduction, extended life and reducing maintenance costs.
3) Product Features
1), Repair wear and tear, 80% -90% of scuffing surface, extend equipment life, effectively reduce the heavy repair costs;
2), Excellent carrying capacity, protect the equipment under extreme pressure conditions, and make the wear and tear drop to the minimum;.
3), Good thermal stability, strong oxidation resistance, able to reduce the production of various types of oxides;
4), Soluble in a variety of lubricating oil, don’t change the nature of the original lubricant;
5), Cooling, noise reduction, vibration reduction, prevention fault generation, reduce the mechanical incidents;
6), 5% -30% energy savings.
4) Product application
The product is easy to stably disperse in a variety of lubricating oil, suitable for solving the energy saving and maintenance problem of diverse power,machinery equipments on steel, oil field, mining, cement, electrical power and other industries, as well as on trains, ships and other large transport industries.
5) Usage
This product is mixed evenly in accordance with the amount of 1% of total lubricating oil, and then added to the lubrication system of equipment.
6
)
Notice
1),Noninflammable, in explosive, in corrosive;
2),Don’t drink and avoid long time skin contact;
3),Protect from impurity and water;
4),Keep in normal temperature and avoid sunlight.
8 1/2 PDC oil drill bits/PDC bits
8 1/2 PDC oil drill bits/PDC bits
1)5 wings
2)reinforced type for oil exploration drilling
3)matrix body
4)about 75kgs
8 1/2 PDC oil drill bits/PDC bits
Characteristics
1) Super long life-as 10 times as cemented carbide drill bits under the same condition.
2) High efficiency-Times of lifting the drilling machine could be reduced sharply, and the average time efficiency could be increased more than 2 times.
3) Wide range of application-it could have a penetration of rock formation with f ≤12, especially for the rock formation with f=5-10.
--high wear resistance and impact-resistant toughness, long drilling life, drilling efficiency can be promoted sharply in penetration of soft and medium soft formation, laber intensity can be reduced.
Specifications:
Model
specification
PDC cutter
blades
rock formation
working way
LJ4131J/M333
4 5/8″
GK, SDB
4
conglomerate
cutting, crush
LJ6134J/M333
6″
GK, SDB
6
conglomerate
cutting, crush
LJ4195J/M222
8 ½″
GK, SDB
4
conglomerate
cutting, crush
LJ5195J/M322
8 ½″
GK, SDB
5
conglomerate
cutting, crush
LJ6195J/M322
8 ½″
GK, SDB
6
conglomerate
cutting, crush
LJ5195J/M232
8 ¾″
GK, SDB
5
conglomerate
cutting, crush
LJ5195J/M322
9 ½″
GK, SDB
5
conglomerate
cutting, crush
LJ6195J/M323
9 ½″
GK, SDB
6
conglomerate
cutting, crush
LJ5194J/M323
12 ¼″
GK, SDB
5
conglomerate
cutting, crush
LJ6194J/M323
12 ¼″
GK, SDB
6
conglomerate
cutting, crush
LJ6195J/M323
12 ¼″
GK, SDB
6
conglomerate
cutting, crush
We also can design PDC bits according to customer requirements.
Service:
Guilin Star Diamond can supply all kinds of PDC coring and non-coring bits, PDC oil bits and PDC anchor bits. PDC bit can be widely used in the fields of geological exploration, coal mining, water conservancy and hydropower, construction of road and railway, and oil well exploration.
MOB: 008613667733724
TEL:+86-773-5822066
FAX:+86-773-5822066
S: glstardiamond
1)5 wings
2)reinforced type for oil exploration drilling
3)matrix body
4)about 75kgs
8 1/2 PDC oil drill bits/PDC bits
Characteristics
1) Super long life-as 10 times as cemented carbide drill bits under the same condition.
2) High efficiency-Times of lifting the drilling machine could be reduced sharply, and the average time efficiency could be increased more than 2 times.
3) Wide range of application-it could have a penetration of rock formation with f ≤12, especially for the rock formation with f=5-10.
--high wear resistance and impact-resistant toughness, long drilling life, drilling efficiency can be promoted sharply in penetration of soft and medium soft formation, laber intensity can be reduced.
Specifications:
Model
specification
PDC cutter
blades
rock formation
working way
LJ4131J/M333
4 5/8″
GK, SDB
4
conglomerate
cutting, crush
LJ6134J/M333
6″
GK, SDB
6
conglomerate
cutting, crush
LJ4195J/M222
8 ½″
GK, SDB
4
conglomerate
cutting, crush
LJ5195J/M322
8 ½″
GK, SDB
5
conglomerate
cutting, crush
LJ6195J/M322
8 ½″
GK, SDB
6
conglomerate
cutting, crush
LJ5195J/M232
8 ¾″
GK, SDB
5
conglomerate
cutting, crush
LJ5195J/M322
9 ½″
GK, SDB
5
conglomerate
cutting, crush
LJ6195J/M323
9 ½″
GK, SDB
6
conglomerate
cutting, crush
LJ5194J/M323
12 ¼″
GK, SDB
5
conglomerate
cutting, crush
LJ6194J/M323
12 ¼″
GK, SDB
6
conglomerate
cutting, crush
LJ6195J/M323
12 ¼″
GK, SDB
6
conglomerate
cutting, crush
We also can design PDC bits according to customer requirements.
Service:
Guilin Star Diamond can supply all kinds of PDC coring and non-coring bits, PDC oil bits and PDC anchor bits. PDC bit can be widely used in the fields of geological exploration, coal mining, water conservancy and hydropower, construction of road and railway, and oil well exploration.
MOB: 008613667733724
TEL:+86-773-5822066
FAX:+86-773-5822066
S: glstardiamond
Nano engine oil additive for marine engine
Nano engine oil additive for marine engine
1 Power saving 5%-30%
2 Antiwear & friction
3 Improving efficiency
Nano engine oil additive for marine engine
1.Discription
Dunba Power Saving & Maintaining addtives for oil for heavy equipment is a power saving and environmental friendly products compound of Nano Metal Particle,polymer,and multifunctional additives,which is made of the newest technological fruit prduced by"national 863 plan".We have the intellectual property rights(Patent No. ZL200810032849.1). It has not only function of
super lubricating,selfrepairing but also of good antioxidation,and good antifriction.
2.Characteristic
1)
Save power 5%-30%,lubricant 50%;
2)Improving the resisting pressure and load capacity of lubricating oil, reducing impact load, and assure the minimum friction;
3)repair attrition dynamically,maitain equipment,reduce repair cost of the equipment effectively;
4)antiwear,reduce friction,reduce shake,cooling,reduce noise,improve efficiency,prolong the service lfe of equipment;
5)Mixed in virous lubricants,not changing the performance of lubricating oil,extend the period of changing oil;
6)Clean oil dirt,prevent malfunction,reduce mechanical accident;
7)The usage is simple and convenient,no damage for the construction of equipment.
3,Technical Characteristic
1)This product is produced by organic and inorganic nano materials, not only possessing the function of strong lubricating & resisting extreme pressure of organic material, but also having intelligent self-repair performance of inorganic nano material. In the process of friction, the nano particle is induced by the friction heat, rapidly penetrating into the micro defect on the surface of metal friction, quickly repairing uneven friction surface, and forming extra smooth,high hardness friction surface, not only reducing the friction coefficient, but also improving the performance of extreme pressure and anti-wear, thereby achieving the effect of power saving ,noise reduction and extending service life.
2)Stable performance,anti-oxidation,excellent dispersivity, mixed with any lubricating oil, no damage for the human body, environmental product.
3)Maintaining the equipment under extreme pressure, make the minimum friction.
Metal Friction surface comparison after and before using Dunba
(after) (before)
4.Application
This product is stable in various lubricants,is suitable for power-saving and maintainance of motive power and merchanical equipment in various boat,ship,and marine transportation.
5,Usage Instruction
Add mixed product to lubrication system, normal usage is about 1% of the total lubricating oil. If you have any problem, please consult the manufacturer.
6,Notice
1)Keep in normal temperature and avoid sunlight
2)Protect from impurity and water
3)Don't drink and avoid long-time skin contact
1 Power saving 5%-30%
2 Antiwear & friction
3 Improving efficiency
Nano engine oil additive for marine engine
1.Discription
Dunba Power Saving & Maintaining addtives for oil for heavy equipment is a power saving and environmental friendly products compound of Nano Metal Particle,polymer,and multifunctional additives,which is made of the newest technological fruit prduced by"national 863 plan".We have the intellectual property rights(Patent No. ZL200810032849.1). It has not only function of
super lubricating,selfrepairing but also of good antioxidation,and good antifriction.
2.Characteristic
1)
Save power 5%-30%,lubricant 50%;
2)Improving the resisting pressure and load capacity of lubricating oil, reducing impact load, and assure the minimum friction;
3)repair attrition dynamically,maitain equipment,reduce repair cost of the equipment effectively;
4)antiwear,reduce friction,reduce shake,cooling,reduce noise,improve efficiency,prolong the service lfe of equipment;
5)Mixed in virous lubricants,not changing the performance of lubricating oil,extend the period of changing oil;
6)Clean oil dirt,prevent malfunction,reduce mechanical accident;
7)The usage is simple and convenient,no damage for the construction of equipment.
3,Technical Characteristic
1)This product is produced by organic and inorganic nano materials, not only possessing the function of strong lubricating & resisting extreme pressure of organic material, but also having intelligent self-repair performance of inorganic nano material. In the process of friction, the nano particle is induced by the friction heat, rapidly penetrating into the micro defect on the surface of metal friction, quickly repairing uneven friction surface, and forming extra smooth,high hardness friction surface, not only reducing the friction coefficient, but also improving the performance of extreme pressure and anti-wear, thereby achieving the effect of power saving ,noise reduction and extending service life.
2)Stable performance,anti-oxidation,excellent dispersivity, mixed with any lubricating oil, no damage for the human body, environmental product.
3)Maintaining the equipment under extreme pressure, make the minimum friction.
Metal Friction surface comparison after and before using Dunba
(after) (before)
4.Application
This product is stable in various lubricants,is suitable for power-saving and maintainance of motive power and merchanical equipment in various boat,ship,and marine transportation.
5,Usage Instruction
Add mixed product to lubrication system, normal usage is about 1% of the total lubricating oil. If you have any problem, please consult the manufacturer.
6,Notice
1)Keep in normal temperature and avoid sunlight
2)Protect from impurity and water
3)Don't drink and avoid long-time skin contact
Nano engine oil additives for machinary
Nano engine oil additives for machinary
1 Power saving 5%-30%
2 Antiwear & friction
3 Improving efficiency
Nano engine oil additives for machinary
1.Discription
Dunba Power Saving & Maintaining addtives for oil for heavy equipment is a power saving and environmental friendly products compound of Nano Metal Particle,polymer,and multifunctional additives,which is made of the newest technological fruit prduced by"national 863 plan".We have the intellectual property rights(Patent No. ZL200810032849.1). It has not only function of
super lubricating,selfrepairing but also of good antioxidation,and good antifriction.
2.Characteristic
1)
Save power 5%-30%,lubricant 50%;
2)Improving the resisting pressure and load capacity of lubricating oil, reducing impact load, and assure the minimum friction;
3)repair attrition dynamically,maitain equipment,reduce repair cost of the equipment effectively;
4)antiwear,reduce friction,reduce shake,cooling,reduce noise,improve efficiency,prolong the service lfe of equipment;
5)Mixed in virous lubricants,not changing the performance of lubricating oil,extend the period of changing oil;
6)Clean oil dirt,prevent malfunction,reduce mechanical accident;
7)The usage is simple and convenient,no damage for the construction of equipment.
3,Technical Characteristic
1)This product is produced by organic and inorganic nano materials, not only possessing the function of strong lubricating & resisting extreme pressure of organic material, but also having intelligent self-repair performance of inorganic nano material. In the process of friction, the nano particle is induced by the friction heat, rapidly penetrating into the micro defect on the surface of metal friction, quickly repairing uneven friction surface, and forming extra smooth,high hardness friction surface, not only reducing the friction coefficient, but also improving the performance of extreme pressure and anti-wear, thereby achieving the effect of power saving ,noise reduction and extending service life.
2)Stable performance,anti-oxidation,excellent dispersivity, mixed with any lubricating oil, no damage for the human body, environmental product.
3)Maintaining the equipment under extreme pressure, make the minimum friction.
Metal Friction surface comparison after and before using Dunba
(after) (before)
4.Application
This product is stable in various lubricants,is suitable for power-saving and maintainance of motive power and merchanical equipment in various fields such as steel,oil field,industry and mining,concrete,electricity,train,ship and other transportation.
5,Usage Instruction
Add mixed product to lubrication system, normal usage is about 3% of the total lubricating oil. If you have any problem, please consult the manufacturer.
6,Notice
1)Keep in normal temperature and avoid sunlight
2)Protect from impurity and water
3)Don't drink and avoid long-time skin contact
1 Power saving 5%-30%
2 Antiwear & friction
3 Improving efficiency
Nano engine oil additives for machinary
1.Discription
Dunba Power Saving & Maintaining addtives for oil for heavy equipment is a power saving and environmental friendly products compound of Nano Metal Particle,polymer,and multifunctional additives,which is made of the newest technological fruit prduced by"national 863 plan".We have the intellectual property rights(Patent No. ZL200810032849.1). It has not only function of
super lubricating,selfrepairing but also of good antioxidation,and good antifriction.
2.Characteristic
1)
Save power 5%-30%,lubricant 50%;
2)Improving the resisting pressure and load capacity of lubricating oil, reducing impact load, and assure the minimum friction;
3)repair attrition dynamically,maitain equipment,reduce repair cost of the equipment effectively;
4)antiwear,reduce friction,reduce shake,cooling,reduce noise,improve efficiency,prolong the service lfe of equipment;
5)Mixed in virous lubricants,not changing the performance of lubricating oil,extend the period of changing oil;
6)Clean oil dirt,prevent malfunction,reduce mechanical accident;
7)The usage is simple and convenient,no damage for the construction of equipment.
3,Technical Characteristic
1)This product is produced by organic and inorganic nano materials, not only possessing the function of strong lubricating & resisting extreme pressure of organic material, but also having intelligent self-repair performance of inorganic nano material. In the process of friction, the nano particle is induced by the friction heat, rapidly penetrating into the micro defect on the surface of metal friction, quickly repairing uneven friction surface, and forming extra smooth,high hardness friction surface, not only reducing the friction coefficient, but also improving the performance of extreme pressure and anti-wear, thereby achieving the effect of power saving ,noise reduction and extending service life.
2)Stable performance,anti-oxidation,excellent dispersivity, mixed with any lubricating oil, no damage for the human body, environmental product.
3)Maintaining the equipment under extreme pressure, make the minimum friction.
Metal Friction surface comparison after and before using Dunba
(after) (before)
4.Application
This product is stable in various lubricants,is suitable for power-saving and maintainance of motive power and merchanical equipment in various fields such as steel,oil field,industry and mining,concrete,electricity,train,ship and other transportation.
5,Usage Instruction
Add mixed product to lubrication system, normal usage is about 3% of the total lubricating oil. If you have any problem, please consult the manufacturer.
6,Notice
1)Keep in normal temperature and avoid sunlight
2)Protect from impurity and water
3)Don't drink and avoid long-time skin contact
Nano engine optimizer
1.energy saving,lubricant saving
2.antiwear,self-reparing
3.shakeproof,reduce noise
4.extending the life of equipment
The instruction of Dunba Power Saving & Maintaining additives
for medium and small equipment
1.Discription
Dunba Power Saving & Maintaining addtives for medium and small equipment is a power saving and environmental friendly products as compound of Nano Metal Particle,polymer,and multifunctional additives,which is made of the newest technological fruit prduced by"national 863 plan".We have the intellectual property rights(Patent No. ZL200810032849.1).It have not only function of super lubricating,selfrepairing but also of good antioxidation,and good antifriction.
2.Characteristic
1)Save power 5%-30%,lubricant 50%;
2)good carrying capacity,improve power take-off,increase economic benifit;
3)repair attrition dynamically,maitain equipment,reduce repair cost of the equipment effectively;
4)antiwear,reduce friction,reduce shake,cooling,reduce noise,improve efficiency,prolong the service lfe of equipment;
5)Mixed in virous lubricants,not changing the performance of lubricating oil,extend the period of changing oil;
6)Clean oil dirt,prevent malfunction,reduce mechanical accident;
7)The usage is simple and convenient,no damage for the construction of equipment.
3,Technical Characteristic
1)This product is produced by organic and inorganic nano materials, not only possessing the function of strong lubricating & resisting extreme pressure of organic material, but also having intelligent self-repair performance of inorganic nano material. In the process of friction, the nano particle is induced by the friction heat, rapidly penetrating into the micro defect on the surface of metal friction, quickly repairing uneven friction surface, and forming extra smooth,high hardness friction surface, not only reducing the friction coefficient, but also improving the performance of extreme pressure and anti-wear, thereby achieving the effect of power saving ,noise reduction and extending service life.
2)Stable performance,anti-oxidation,excellent dispersivity, mixed with any lubricating oil, no damage for the human body, environmental product.
3)Maintaining the equipment under extreme pressure, make the minimum friction.
Metal Friction surface comparison after and before using Dunba
(after) (before)
4.Application
This product is stable in various lubricants,is suitable for power-saving and maintainance of midium and small equipment in the fields of spinning,papermaking,chemical industry.
5,Usage Instruction
Add mixed product to lubrication system, normal usage is about 1%-3% of the total lubricating oil. If you have any problem, please consult the manufacturer.
6,Notice
1)Keep in normal temperature and avoid sunlight
2)Protect from impurity and water
3)Don’t drink and avoid skin contact for long time
2.antiwear,self-reparing
3.shakeproof,reduce noise
4.extending the life of equipment
The instruction of Dunba Power Saving & Maintaining additives
for medium and small equipment
1.Discription
Dunba Power Saving & Maintaining addtives for medium and small equipment is a power saving and environmental friendly products as compound of Nano Metal Particle,polymer,and multifunctional additives,which is made of the newest technological fruit prduced by"national 863 plan".We have the intellectual property rights(Patent No. ZL200810032849.1).It have not only function of super lubricating,selfrepairing but also of good antioxidation,and good antifriction.
2.Characteristic
1)Save power 5%-30%,lubricant 50%;
2)good carrying capacity,improve power take-off,increase economic benifit;
3)repair attrition dynamically,maitain equipment,reduce repair cost of the equipment effectively;
4)antiwear,reduce friction,reduce shake,cooling,reduce noise,improve efficiency,prolong the service lfe of equipment;
5)Mixed in virous lubricants,not changing the performance of lubricating oil,extend the period of changing oil;
6)Clean oil dirt,prevent malfunction,reduce mechanical accident;
7)The usage is simple and convenient,no damage for the construction of equipment.
3,Technical Characteristic
1)This product is produced by organic and inorganic nano materials, not only possessing the function of strong lubricating & resisting extreme pressure of organic material, but also having intelligent self-repair performance of inorganic nano material. In the process of friction, the nano particle is induced by the friction heat, rapidly penetrating into the micro defect on the surface of metal friction, quickly repairing uneven friction surface, and forming extra smooth,high hardness friction surface, not only reducing the friction coefficient, but also improving the performance of extreme pressure and anti-wear, thereby achieving the effect of power saving ,noise reduction and extending service life.
2)Stable performance,anti-oxidation,excellent dispersivity, mixed with any lubricating oil, no damage for the human body, environmental product.
3)Maintaining the equipment under extreme pressure, make the minimum friction.
Metal Friction surface comparison after and before using Dunba
(after) (before)
4.Application
This product is stable in various lubricants,is suitable for power-saving and maintainance of midium and small equipment in the fields of spinning,papermaking,chemical industry.
5,Usage Instruction
Add mixed product to lubrication system, normal usage is about 1%-3% of the total lubricating oil. If you have any problem, please consult the manufacturer.
6,Notice
1)Keep in normal temperature and avoid sunlight
2)Protect from impurity and water
3)Don’t drink and avoid skin contact for long time
Nano engine treatment concentrate for marine engine
engine treatment concentrate
1 Power saving 5%-30%
2 Antiwear & friction
3 Improving efficiency
4.Extend service life
Nano engine treatment concentrate for marine engine
1.Discription
Dunba Power Saving & Maintaining addtives for oil for heavy equipment is a power saving and environmental friendly products compound of Nano Metal Particle,polymer,and multifunctional additives,which is made of the newest technological fruit prduced by"national 863 plan".We have the intellectual property rights(Patent No. ZL200810032849.1). It has not only function of
super lubricating,selfrepairing but also of good antioxidation,and good antifriction.
2.Characteristic
1)
Save power 5%-30%,lubricant 50%;
2)Improving the resisting pressure and load capacity of lubricating oil, reducing impact load, and assure the minimum friction;
3)repair attrition dynamically,maitain equipment,reduce repair cost of the equipment effectively;
4)antiwear,reduce friction,reduce shake,cooling,reduce noise,improve efficiency,prolong the service lfe of equipment;
5)Mixed in virous lubricants,not changing the performance of lubricating oil,extend the period of changing oil;
6)Clean oil dirt,prevent malfunction,reduce mechanical accident;
7)The usage is simple and convenient,no damage for the construction of equipment.
3,Technical Characteristic
1)This product is produced by organic and inorganic nano materials, not only possessing the function of strong lubricating & resisting extreme pressure of organic material, but also having intelligent self-repair performance of inorganic nano material. In the process of friction, the nano particle is induced by the friction heat, rapidly penetrating into the micro defect on the surface of metal friction, quickly repairing uneven friction surface, and forming extra smooth,high hardness friction surface, not only reducing the friction coefficient, but also improving the performance of extreme pressure and anti-wear, thereby achieving the effect of power saving ,noise reduction and extending service life.
2)Stable performance,anti-oxidation,excellent dispersivity, mixed with any lubricating oil, no damage for the human body, environmental product.
3)Maintaining the equipment under extreme pressure, make the minimum friction.
Metal Friction surface comparison after and before using Dunba
(after) (before)
4.Application
This product is stable in various lubricants,is suitable for power-saving and maintainance of motive power and merchanical equipment in various fields such as steel,oil field,industry and mining,concrete,electricity,train,ship and other transportation.
5,Usage Instruction
Add mixed product to lubrication system, normal usage is about 1% of the total lubricating oil. If you have any problem, please consult the manufacturer.
6,Notice
1)Keep in normal temperature and avoid sunlight
2)Protect from impurity and water
3)Don't drink and avoid long-time skin contact
1 Power saving 5%-30%
2 Antiwear & friction
3 Improving efficiency
4.Extend service life
Nano engine treatment concentrate for marine engine
1.Discription
Dunba Power Saving & Maintaining addtives for oil for heavy equipment is a power saving and environmental friendly products compound of Nano Metal Particle,polymer,and multifunctional additives,which is made of the newest technological fruit prduced by"national 863 plan".We have the intellectual property rights(Patent No. ZL200810032849.1). It has not only function of
super lubricating,selfrepairing but also of good antioxidation,and good antifriction.
2.Characteristic
1)
Save power 5%-30%,lubricant 50%;
2)Improving the resisting pressure and load capacity of lubricating oil, reducing impact load, and assure the minimum friction;
3)repair attrition dynamically,maitain equipment,reduce repair cost of the equipment effectively;
4)antiwear,reduce friction,reduce shake,cooling,reduce noise,improve efficiency,prolong the service lfe of equipment;
5)Mixed in virous lubricants,not changing the performance of lubricating oil,extend the period of changing oil;
6)Clean oil dirt,prevent malfunction,reduce mechanical accident;
7)The usage is simple and convenient,no damage for the construction of equipment.
3,Technical Characteristic
1)This product is produced by organic and inorganic nano materials, not only possessing the function of strong lubricating & resisting extreme pressure of organic material, but also having intelligent self-repair performance of inorganic nano material. In the process of friction, the nano particle is induced by the friction heat, rapidly penetrating into the micro defect on the surface of metal friction, quickly repairing uneven friction surface, and forming extra smooth,high hardness friction surface, not only reducing the friction coefficient, but also improving the performance of extreme pressure and anti-wear, thereby achieving the effect of power saving ,noise reduction and extending service life.
2)Stable performance,anti-oxidation,excellent dispersivity, mixed with any lubricating oil, no damage for the human body, environmental product.
3)Maintaining the equipment under extreme pressure, make the minimum friction.
Metal Friction surface comparison after and before using Dunba
(after) (before)
4.Application
This product is stable in various lubricants,is suitable for power-saving and maintainance of motive power and merchanical equipment in various fields such as steel,oil field,industry and mining,concrete,electricity,train,ship and other transportation.
5,Usage Instruction
Add mixed product to lubrication system, normal usage is about 1% of the total lubricating oil. If you have any problem, please consult the manufacturer.
6,Notice
1)Keep in normal temperature and avoid sunlight
2)Protect from impurity and water
3)Don't drink and avoid long-time skin contact
Nano engine wear protection
Nano engine wear protection
1.Save fuel & lub-oil
2.Reduce emission
3.Protect engine
Dunba Automotive Lubricant Nano Additives for Limousine is a fuel-saving and environmental solution. It is produced by technical equipment with intellectual property rights, using Nano-alloy particles, Nano-polymer and multifunctional additives.
(Patent No. ZL200810032849.1)
Mixed different nano lubricant additives in the lubrication oil after 24 hours,
please see the comparison picture:
Hot sale nano lubricant additives
Dunba Nano luricant additives
Four Major Features
Fast:
engine working environment improved, noise and vibration reduced, and power enhanced in 15 minutes.
Powerful:
triple protection including inner reinforced, surface repaired and outer wear proofed by Nano-particles.
Environmental:
reduce exhaust particles and smoke emissions.
No side effects:
it is suitable for long-term use of various cars, without any adverse effects or side effects.
Nine Major Functions
Engine protection:
triple protection to ensure that the engine is powerful in any condition.
Scuffing reduction:
80%-90% reductions in engine wear and tear; still provide superior protection under the conditions of lubrication system failure or non-oil.
Fast start:
superior lubrication function can significantly reduce the friction coefficient and improve the initial rotation speed.
Auto repair:
wear and tear repaired dynamically, engine life extended 2-3 times.
Noise reduction:
effectively reduce engine noise and vibration.
Corrosion prevention:
prevent friction parts from corrosive pitting.
Power strengthening:
restore the engine cylinder pressure. Power increase by 5%-35%.
Fuel saving:
5%-25% consumption saved.
Environmentally friendly:
improve oil burning, blue smoke and other conditions, to reduce exhaust particles by 20%-30% and smoke emissions by 50%.
Two Major Breakthroughs
Auto repaired:
put engine maintenance into practice by auto repaired using Nano-particles.
Four in one:
maintaining, repairing,anti-wear and fuel-saving simultaneously.
Application
The product can be easily and stably dispersed in all kinds of lubrication fluid. The main effect of this product is wear-proofing, repairing and fuel-saving. The product is suitable for all kinds of cars power and transmission systems.
How to use
Add the fluid to lubricating oil, keep the engine ticking over around 2 minutes, and start driving after mixing. Normal usage of this product is about 3.5% of the total lubricating oil, in other words, please mix 4 liters of lubricating oil with one bottle (150 grams) of DBDS-012.
1.Save fuel & lub-oil
2.Reduce emission
3.Protect engine
Dunba Automotive Lubricant Nano Additives for Limousine is a fuel-saving and environmental solution. It is produced by technical equipment with intellectual property rights, using Nano-alloy particles, Nano-polymer and multifunctional additives.
(Patent No. ZL200810032849.1)
Mixed different nano lubricant additives in the lubrication oil after 24 hours,
please see the comparison picture:
Hot sale nano lubricant additives
Dunba Nano luricant additives
Four Major Features
Fast:
engine working environment improved, noise and vibration reduced, and power enhanced in 15 minutes.
Powerful:
triple protection including inner reinforced, surface repaired and outer wear proofed by Nano-particles.
Environmental:
reduce exhaust particles and smoke emissions.
No side effects:
it is suitable for long-term use of various cars, without any adverse effects or side effects.
Nine Major Functions
Engine protection:
triple protection to ensure that the engine is powerful in any condition.
Scuffing reduction:
80%-90% reductions in engine wear and tear; still provide superior protection under the conditions of lubrication system failure or non-oil.
Fast start:
superior lubrication function can significantly reduce the friction coefficient and improve the initial rotation speed.
Auto repair:
wear and tear repaired dynamically, engine life extended 2-3 times.
Noise reduction:
effectively reduce engine noise and vibration.
Corrosion prevention:
prevent friction parts from corrosive pitting.
Power strengthening:
restore the engine cylinder pressure. Power increase by 5%-35%.
Fuel saving:
5%-25% consumption saved.
Environmentally friendly:
improve oil burning, blue smoke and other conditions, to reduce exhaust particles by 20%-30% and smoke emissions by 50%.
Two Major Breakthroughs
Auto repaired:
put engine maintenance into practice by auto repaired using Nano-particles.
Four in one:
maintaining, repairing,anti-wear and fuel-saving simultaneously.
Application
The product can be easily and stably dispersed in all kinds of lubrication fluid. The main effect of this product is wear-proofing, repairing and fuel-saving. The product is suitable for all kinds of cars power and transmission systems.
How to use
Add the fluid to lubricating oil, keep the engine ticking over around 2 minutes, and start driving after mixing. Normal usage of this product is about 3.5% of the total lubricating oil, in other words, please mix 4 liters of lubricating oil with one bottle (150 grams) of DBDS-012.
Nano environmentally friendly products for reducing exhaust particles by 20-30%
Nano anti-additive
1.5%-25% fuel savings
2.Reduced friction, extended engine life
3.Increased horsepower & acceleration
Not only saving fuel, but also maintaining your love car :-)
Multifunctional nano additive with excellent antiwear, extreme pressure, corrosion resistance, and antioxidant performance
Dunba Nano Fuel-saving & maintaining Fluid is an energy saving environmental protection product.It is produced by technical equipment with intellectual property rights, composed of Nano-alloy particles, Nano-polymer and multifunctional additives. (Patent No. ZL200810032849.1)
Mixed different nano lubricant additives in the lubrication oil after 24 hours,
please see the comparison picture
Hot sale nano lubricant additives
Dunba Nano luricant additives
Four Major Features
Fast:
engine working environment improved, noise and vibration reduced, and power enhanced in 15 minutes.
Powerful:
triple protection including inner reinforced, surface repaired and outer wear proofed by Nano-particles.
Environmental:
reduce exhaust particles and smoke emissions.
No side effects:
it is suitable for long-term use of various cars
, without any adverse effects or side effects.
Nine Major Functions
Engine protection:
triple protection to ensure that the engine is powerful in any condition.
Scuffing reduction:
80%-90% reductions in engine wear and tear
; still provide superior protection under the conditions of lubrication system failure or non-oil.
Fast start:
superior lubrication function can significantly reduce the friction coefficient and improve the initial rotation speed.
Auto repair:
wear and tear repaired dynamically,
engine life extended 2-3 times.
Noise reduction:
effectively reduce engine noise and vibration.
Corrosion prevention:
prevent friction parts from corrosive pitting.
Power strengthening:
restore the engine cylinder pressure.
Power increase by 5%-35%.
Fuel saving:
5%-25% consumption saved.
Environmentally friendly:
improve oil burning, blue smoke and other conditions, to
reduce exhaust particles by 20%-30% and smoke emissions by 50%.
Two Major Breakthroughs
Auto repaired:
put engine maintenance into practice by auto repaired using Nano-particles.
Three in one:
maintaining, repairing and fuel-saving simultaneously.
Application
The product can be easily and stably dispersed in all kinds of lubrication fluid
. The main effect of this product is wear-proofing, repairing and fuel-saving. The product is suitable for all kinds of cars power and transmission systems.
How to use
Add the fluid to lubricating oil, keep the engine ticking over around 2 minutes, and start driving after mixing. Normal usage of this product is about 3.5% of the total lubricating oil, in other words, please mix 4 liters of lubricating oil with one bottle (150 grams) of DBDS-012.
1.5%-25% fuel savings
2.Reduced friction, extended engine life
3.Increased horsepower & acceleration
Not only saving fuel, but also maintaining your love car :-)
Multifunctional nano additive with excellent antiwear, extreme pressure, corrosion resistance, and antioxidant performance
Dunba Nano Fuel-saving & maintaining Fluid is an energy saving environmental protection product.It is produced by technical equipment with intellectual property rights, composed of Nano-alloy particles, Nano-polymer and multifunctional additives. (Patent No. ZL200810032849.1)
Mixed different nano lubricant additives in the lubrication oil after 24 hours,
please see the comparison picture
Hot sale nano lubricant additives
Dunba Nano luricant additives
Four Major Features
Fast:
engine working environment improved, noise and vibration reduced, and power enhanced in 15 minutes.
Powerful:
triple protection including inner reinforced, surface repaired and outer wear proofed by Nano-particles.
Environmental:
reduce exhaust particles and smoke emissions.
No side effects:
it is suitable for long-term use of various cars
, without any adverse effects or side effects.
Nine Major Functions
Engine protection:
triple protection to ensure that the engine is powerful in any condition.
Scuffing reduction:
80%-90% reductions in engine wear and tear
; still provide superior protection under the conditions of lubrication system failure or non-oil.
Fast start:
superior lubrication function can significantly reduce the friction coefficient and improve the initial rotation speed.
Auto repair:
wear and tear repaired dynamically,
engine life extended 2-3 times.
Noise reduction:
effectively reduce engine noise and vibration.
Corrosion prevention:
prevent friction parts from corrosive pitting.
Power strengthening:
restore the engine cylinder pressure.
Power increase by 5%-35%.
Fuel saving:
5%-25% consumption saved.
Environmentally friendly:
improve oil burning, blue smoke and other conditions, to
reduce exhaust particles by 20%-30% and smoke emissions by 50%.
Two Major Breakthroughs
Auto repaired:
put engine maintenance into practice by auto repaired using Nano-particles.
Three in one:
maintaining, repairing and fuel-saving simultaneously.
Application
The product can be easily and stably dispersed in all kinds of lubrication fluid
. The main effect of this product is wear-proofing, repairing and fuel-saving. The product is suitable for all kinds of cars power and transmission systems.
How to use
Add the fluid to lubricating oil, keep the engine ticking over around 2 minutes, and start driving after mixing. Normal usage of this product is about 3.5% of the total lubricating oil, in other words, please mix 4 liters of lubricating oil with one bottle (150 grams) of DBDS-012.
Nano equipment maintenance product
Industrial lubricant additive
1 Power saving 5%-30%
2 Antiwear & friction
3 Improving efficiency
4.No agglomerate
The instruction of Dunba Power Saving & Maintaining additives
for heavy equipment
1.Discription
Dunba Power Saving & Maintaining addtives for oil for heavy equipment is a power saving and environmental friendly products as compound of Nano Metal Particle,polymer,and multifunctional additives,which is made of the newest technological fruit prduced by"national 863 plan".We have the intellectual property rights(Patent No. ZL200810032849.1).It has not only function of
super lubricating,selfrepairing but also of good antioxidation,and good antifriction.
2.Characteristic
1)
Save power 5%-30%,lubricant 50%;
2)Improving the resisting pressure and load capacity of lubricating oil, reducing impact load, and assure the minimum friction;
3)repair attrition dynamically,maitain equipment,reduce repair cost of the equipment effectively;
4)antiwear,reduce friction,reduce shake,cooling,reduce noise,improve efficiency,prolong the service lfe of equipment;
5)Mixed in virous lubricants,not changing the performance of lubricating oil,extend the period of changing oil;
6)Clean oil dirt,prevent malfunction,reduce mechanical accident;
7)The usage is simple and convenient,no damage for the construction of equipment.
3,Technical Characteristic
1)This product is produced by organic and inorganic nano materials, not only possessing the function of strong lubricating & resisting extreme pressure of organic material, but also having intelligent self-repair performance of inorganic nano material. In the process of friction, the nano particle is induced by the friction heat, rapidly penetrating into the micro defect on the surface of metal friction, quickly repairing uneven friction surface, and forming extra smooth,high hardness friction surface, not only reducing the friction coefficient, but also improving the performance of extreme pressure and anti-wear, thereby achieving the effect of power saving ,noise reduction and extending service life.
2)Stable performance,anti-oxidation,excellent dispersivity, mixed with any lubricating oil, no damage for the human body, environmental product.
3)Maintaining the equipment under extreme pressure, make the minimum friction.
Metal Friction surface comparison after and before using Dunba
(after) (before)
4.Application
This product is stable in various lubricants
,is suitable for power-saving and maintainance of motive power and mechanical equipment in various fields such as steel,oil field,industry and mining,concrete,electricity,train,ship and other transportation.
5,Usage Instruction
Add mixed product to lubrication system, normal usage is about 2.5% of the total lubricating oil. If you have any problem, please consult the manufacturer.
6,Notice
1)Keep in normal temperature and avoid sunlight
2)Protect from impurity and water
3)Don't drink and avoid long-time skin contact
1 Power saving 5%-30%
2 Antiwear & friction
3 Improving efficiency
4.No agglomerate
The instruction of Dunba Power Saving & Maintaining additives
for heavy equipment
1.Discription
Dunba Power Saving & Maintaining addtives for oil for heavy equipment is a power saving and environmental friendly products as compound of Nano Metal Particle,polymer,and multifunctional additives,which is made of the newest technological fruit prduced by"national 863 plan".We have the intellectual property rights(Patent No. ZL200810032849.1).It has not only function of
super lubricating,selfrepairing but also of good antioxidation,and good antifriction.
2.Characteristic
1)
Save power 5%-30%,lubricant 50%;
2)Improving the resisting pressure and load capacity of lubricating oil, reducing impact load, and assure the minimum friction;
3)repair attrition dynamically,maitain equipment,reduce repair cost of the equipment effectively;
4)antiwear,reduce friction,reduce shake,cooling,reduce noise,improve efficiency,prolong the service lfe of equipment;
5)Mixed in virous lubricants,not changing the performance of lubricating oil,extend the period of changing oil;
6)Clean oil dirt,prevent malfunction,reduce mechanical accident;
7)The usage is simple and convenient,no damage for the construction of equipment.
3,Technical Characteristic
1)This product is produced by organic and inorganic nano materials, not only possessing the function of strong lubricating & resisting extreme pressure of organic material, but also having intelligent self-repair performance of inorganic nano material. In the process of friction, the nano particle is induced by the friction heat, rapidly penetrating into the micro defect on the surface of metal friction, quickly repairing uneven friction surface, and forming extra smooth,high hardness friction surface, not only reducing the friction coefficient, but also improving the performance of extreme pressure and anti-wear, thereby achieving the effect of power saving ,noise reduction and extending service life.
2)Stable performance,anti-oxidation,excellent dispersivity, mixed with any lubricating oil, no damage for the human body, environmental product.
3)Maintaining the equipment under extreme pressure, make the minimum friction.
Metal Friction surface comparison after and before using Dunba
(after) (before)
4.Application
This product is stable in various lubricants
,is suitable for power-saving and maintainance of motive power and mechanical equipment in various fields such as steel,oil field,industry and mining,concrete,electricity,train,ship and other transportation.
5,Usage Instruction
Add mixed product to lubrication system, normal usage is about 2.5% of the total lubricating oil. If you have any problem, please consult the manufacturer.
6,Notice
1)Keep in normal temperature and avoid sunlight
2)Protect from impurity and water
3)Don't drink and avoid long-time skin contact
Nano extreme pressure and anti-wear agent
1 Power saving 5%-30%
2 Antiwear & friction
3 Improving efficiency
4.Extend service life
The instruction of Dunba Power Saving & Maintaining additives
for heavy equipment
1.Discription
Dunba Power Saving & Maintaining addtives for oil for heavy equipment is a power saving and environmental friendly products as compound of Nano Metal Particle,polymer,and multifunctional additives,which is made of the newest technological fruit prduced by"national 863 plan".We have the intellectual property rights(Patent No. ZL200810032849.1).It has not only function of
super lubricating,selfrepairing but also of good antioxidation,and good antifriction.
2.Characteristic
1)
Save power 5%-30%,lubricant 50%;
2)Improving the resisting pressure and load capacity of lubricating oil, reducing impact load, and assure the minimum friction;
3)repair attrition dynamically,maitain equipment,reduce repair cost of the equipment effectively;
4)antiwear,reduce friction,reduce shake,cooling,reduce noise,improve efficiency,prolong the service lfe of equipment;
5)Mixed in virous lubricants,not changing the performance of lubricating oil,extend the period of changing oil;
6)Clean oil dirt,prevent malfunction,reduce mechanical accident;
7)The usage is simple and convenient,no damage for the construction of equipment.
3,Technical Characteristic
1)This product is produced by organic and inorganic nano materials, not only possessing the function of strong lubricating & resisting extreme pressure of organic material, but also having intelligent self-repair performance of inorganic nano material. In the process of friction, the nano particle is induced by the friction heat, rapidly penetrating into the micro defect on the surface of metal friction, quickly repairing uneven friction surface, and forming extra smooth,high hardness friction surface, not only reducing the friction coefficient, but also improving the performance of extreme pressure and anti-wear, thereby achieving the effect of power saving ,noise reduction and extending service life.
2)Stable performance,anti-oxidation,excellent dispersivity, mixed with any lubricating oil, no damage for the human body, environmental product.
3)Maintaining the equipment under extreme pressure, make the minimum friction.
Metal Friction surface comparison after and before using Dunba
(after) (before)
4.Application
This product is stable in various lubricants,is suitable for power-saving and maintainance of midium and small equipment in the fields of spinning,papermaking,chemical industry.
5,Usage Instruction
Add mixed product to lubrication system, normal usage is about 1%-3% of the total lubricating oil. If you have any problem, please consult the manufacturer.
6,Notice
1)Keep in normal temperature and avoid sunlight
2)Protect from impurity and water
3)Don’t drink and avoid skin contact for long time
2 Antiwear & friction
3 Improving efficiency
4.Extend service life
The instruction of Dunba Power Saving & Maintaining additives
for heavy equipment
1.Discription
Dunba Power Saving & Maintaining addtives for oil for heavy equipment is a power saving and environmental friendly products as compound of Nano Metal Particle,polymer,and multifunctional additives,which is made of the newest technological fruit prduced by"national 863 plan".We have the intellectual property rights(Patent No. ZL200810032849.1).It has not only function of
super lubricating,selfrepairing but also of good antioxidation,and good antifriction.
2.Characteristic
1)
Save power 5%-30%,lubricant 50%;
2)Improving the resisting pressure and load capacity of lubricating oil, reducing impact load, and assure the minimum friction;
3)repair attrition dynamically,maitain equipment,reduce repair cost of the equipment effectively;
4)antiwear,reduce friction,reduce shake,cooling,reduce noise,improve efficiency,prolong the service lfe of equipment;
5)Mixed in virous lubricants,not changing the performance of lubricating oil,extend the period of changing oil;
6)Clean oil dirt,prevent malfunction,reduce mechanical accident;
7)The usage is simple and convenient,no damage for the construction of equipment.
3,Technical Characteristic
1)This product is produced by organic and inorganic nano materials, not only possessing the function of strong lubricating & resisting extreme pressure of organic material, but also having intelligent self-repair performance of inorganic nano material. In the process of friction, the nano particle is induced by the friction heat, rapidly penetrating into the micro defect on the surface of metal friction, quickly repairing uneven friction surface, and forming extra smooth,high hardness friction surface, not only reducing the friction coefficient, but also improving the performance of extreme pressure and anti-wear, thereby achieving the effect of power saving ,noise reduction and extending service life.
2)Stable performance,anti-oxidation,excellent dispersivity, mixed with any lubricating oil, no damage for the human body, environmental product.
3)Maintaining the equipment under extreme pressure, make the minimum friction.
Metal Friction surface comparison after and before using Dunba
(after) (before)
4.Application
This product is stable in various lubricants,is suitable for power-saving and maintainance of midium and small equipment in the fields of spinning,papermaking,chemical industry.
5,Usage Instruction
Add mixed product to lubrication system, normal usage is about 1%-3% of the total lubricating oil. If you have any problem, please consult the manufacturer.
6,Notice
1)Keep in normal temperature and avoid sunlight
2)Protect from impurity and water
3)Don’t drink and avoid skin contact for long time
Nano friction reduction lubricant addtives for heavy duty equipments
1. Nano friction reduction additives
2. Saving fuel & lub-oil
2. Self-repair & anti-wear
3. Dispersed in a variety of lub-o
Nano friction reduction addtives integrates nano-metal and organic nano-materials that activate special self-repairing and anti-wear protection in varying working environments.
Mixed different nano lubricant additives in the lubricating oil after 24 hours,
please see the comparison picture:
Hot sale nano lubricant additives
Dunba Nano luricant additives
1. Repair surfaces and reduce friction.
2. Improve energy efficiency, boost power output.
3. Reduce carbon deposit and discharge.
4. Reduce vibration and noise.
5. Extend the service life of engines and machinery.
2. Saving fuel & lub-oil
2. Self-repair & anti-wear
3. Dispersed in a variety of lub-o
Nano friction reduction addtives integrates nano-metal and organic nano-materials that activate special self-repairing and anti-wear protection in varying working environments.
Mixed different nano lubricant additives in the lubricating oil after 24 hours,
please see the comparison picture:
Hot sale nano lubricant additives
Dunba Nano luricant additives
1. Repair surfaces and reduce friction.
2. Improve energy efficiency, boost power output.
3. Reduce carbon deposit and discharge.
4. Reduce vibration and noise.
5. Extend the service life of engines and machinery.
Nano fuel-saving and maintaing fluid
Nano technology automotive:
1,Fuel-saving and maintaining fluid
2,Prolong engine life
3,Prowder strengthing
4,Self-repairing
Nano Fuel-saving and Maintaining Flluid for Limousine
Model
DBDS-012
Application
Anti-wear, self-repair, fuel economy for limousine
Brand
DUNBA
Packing
150g/bottle
Executive Standard
Q/ZDS001-2008
Validity
3years
1)
Product Introduction
"D
unba Nano Fuel-saving & maintaining Fluid for Limousine" is a fuel-saving environmental friendly multi-functional lubricant additives made by 2 Nano materials with anti-wear and self-repair functions,
produced with our own intellectual property rights (Patent No. ZL200810032849.1) and new scientific and technological achievement by China 863 high-tech Project.
2)
Nine functions
Fuel economy
:
saving fuel and engine oil, 5%-25% oil consumption saved;
Engine protection:
triple strong protection to ensure that the engine is powerful in any work condition;
Anti-wear
:
80%-90% reductions in engine wear and tear; still provide superior protection under the conditions of lubrication system failure or non-oil.
Self-repairing
:
wear and tear repaired dynamically, engine life extended 2-3 times.
Fast start
:
superior lubrication function can significantly reduce the friction coefficient and improve the initial rotation speed.
Power strengthening
:
restore the engine cylinder pressure. Power increased by 5%-35%.
Noise reduction
:
effectively reduce engine noise and vibration.
Corrosion prevention
:
prevent friction parts from corrosive pitting.
Environmentally friendly
:
solving the symptoms of engine oil burning, blue smoke and other conditions, reduce exhaust particles by 20%-30% and smoke emissions by 50%.
3)
Four Major Features
Fast
:
engine working environment improved in 15 minutes, noise and vibration reduced, and power enhanced.
Powerful
:
triple strong protection including inner reinforced, surface repaired and outer anti-wear by Nano-particles.
Environmental Friendly
:
reduce exhaust particles and smoke emissions.
No side effects
:
suitable for long-term use of various vehicles, without any adverse effects or side effects.
4)
Two Major Breakthroughs
Self-repairing:
Nano particle repairs the wear & scuffing surface automatically, then fundamentally achieving the engine maintenance;
Four in one
:
Fuel economy, anti-wear, repairing and maintaining simultaneously.
5)
Application
This product can be easily and stably dispersed in all kinds of lubricants, suitable for various lubricating system of a broad range of cars, the anti-wear and repair effect is more excellent for those vehicles run for many years and badly worn cars.
6)
Usage methods
After engine oil change, add the product to engine oil tank, keep the engine idling for around two minutes; or mix the product with engine oil evenly in advance, then add mixed product to engine oil tank. Normal usage about 3.5% of the total lubricating oil, in other words, for ordinary car, please mix 4 liters of lubricating oil with one bottle (150 grams).
This product can also be added into gear box, mixed with gear oil at 3.5% ratio.
1,Fuel-saving and maintaining fluid
2,Prolong engine life
3,Prowder strengthing
4,Self-repairing
Nano Fuel-saving and Maintaining Flluid for Limousine
Model
DBDS-012
Application
Anti-wear, self-repair, fuel economy for limousine
Brand
DUNBA
Packing
150g/bottle
Executive Standard
Q/ZDS001-2008
Validity
3years
1)
Product Introduction
"D
unba Nano Fuel-saving & maintaining Fluid for Limousine" is a fuel-saving environmental friendly multi-functional lubricant additives made by 2 Nano materials with anti-wear and self-repair functions,
produced with our own intellectual property rights (Patent No. ZL200810032849.1) and new scientific and technological achievement by China 863 high-tech Project.
2)
Nine functions
Fuel economy
:
saving fuel and engine oil, 5%-25% oil consumption saved;
Engine protection:
triple strong protection to ensure that the engine is powerful in any work condition;
Anti-wear
:
80%-90% reductions in engine wear and tear; still provide superior protection under the conditions of lubrication system failure or non-oil.
Self-repairing
:
wear and tear repaired dynamically, engine life extended 2-3 times.
Fast start
:
superior lubrication function can significantly reduce the friction coefficient and improve the initial rotation speed.
Power strengthening
:
restore the engine cylinder pressure. Power increased by 5%-35%.
Noise reduction
:
effectively reduce engine noise and vibration.
Corrosion prevention
:
prevent friction parts from corrosive pitting.
Environmentally friendly
:
solving the symptoms of engine oil burning, blue smoke and other conditions, reduce exhaust particles by 20%-30% and smoke emissions by 50%.
3)
Four Major Features
Fast
:
engine working environment improved in 15 minutes, noise and vibration reduced, and power enhanced.
Powerful
:
triple strong protection including inner reinforced, surface repaired and outer anti-wear by Nano-particles.
Environmental Friendly
:
reduce exhaust particles and smoke emissions.
No side effects
:
suitable for long-term use of various vehicles, without any adverse effects or side effects.
4)
Two Major Breakthroughs
Self-repairing:
Nano particle repairs the wear & scuffing surface automatically, then fundamentally achieving the engine maintenance;
Four in one
:
Fuel economy, anti-wear, repairing and maintaining simultaneously.
5)
Application
This product can be easily and stably dispersed in all kinds of lubricants, suitable for various lubricating system of a broad range of cars, the anti-wear and repair effect is more excellent for those vehicles run for many years and badly worn cars.
6)
Usage methods
After engine oil change, add the product to engine oil tank, keep the engine idling for around two minutes; or mix the product with engine oil evenly in advance, then add mixed product to engine oil tank. Normal usage about 3.5% of the total lubricating oil, in other words, for ordinary car, please mix 4 liters of lubricating oil with one bottle (150 grams).
This product can also be added into gear box, mixed with gear oil at 3.5% ratio.
8 1/2 PDC oil drill bits
8 1/2 PDC oil drill bits
1)5 wings
2)reinforced type for oil exploration drilling
3)matrix body
4)about 75kgs
8 1/2 PDC oil drill bits
Characteristics
1) Super long life-as 10 times as cemented carbide drill bits under the same condition.
2) High efficiency-Times of lifting the drilling machine could be reduced sharply, and the average time efficiency could be increased more than 2 times.
3) Wide range of application-it could have a penetration of rock formation with f ≤12, especially for the rock formation with f=5-10.
--high wear resistance and impact-resistant toughness, long drilling life, drilling efficiency can be promoted sharply in penetration of soft and medium soft formation, laber intensity can be reduced.
Specifications:
Model
specification
PDC cutter
blades
rock formation
working way
LJ4131J/M333
4 5/8″
GK, SDB
4
conglomerate
cutting, crush
LJ6134J/M333
6″
GK, SDB
6
conglomerate
cutting, crush
LJ4195J/M222
8 ½″
GK, SDB
4
conglomerate
cutting, crush
LJ5195J/M322
8 ½″
GK, SDB
5
conglomerate
cutting, crush
LJ6195J/M322
8 ½″
GK, SDB
6
conglomerate
cutting, crush
LJ5195J/M232
8 ¾″
GK, SDB
5
conglomerate
cutting, crush
LJ5195J/M322
9 ½″
GK, SDB
5
conglomerate
cutting, crush
LJ6195J/M323
9 ½″
GK, SDB
6
conglomerate
cutting, crush
LJ5194J/M323
12 ¼″
GK, SDB
5
conglomerate
cutting, crush
LJ6194J/M323
12 ¼″
GK, SDB
6
conglomerate
cutting, crush
LJ6195J/M323
12 ¼″
GK, SDB
6
conglomerate
cutting, crush
We also can design PDC bits according to customer requirements.
Service:
Guilin Star Diamond can supply all kinds of PDC coring and non-coring bits, PDC oil bits and PDC anchor bits. PDC bit can be widely used in the fields of geological exploration, coal mining, water conservancy and hydropower, construction of road and railway, and oil well exploration.
MOB: 008613667733724
TEL:+86-773-5822066
FAX:+86-773-5822066
S: glstardiamond
1)5 wings
2)reinforced type for oil exploration drilling
3)matrix body
4)about 75kgs
8 1/2 PDC oil drill bits
Characteristics
1) Super long life-as 10 times as cemented carbide drill bits under the same condition.
2) High efficiency-Times of lifting the drilling machine could be reduced sharply, and the average time efficiency could be increased more than 2 times.
3) Wide range of application-it could have a penetration of rock formation with f ≤12, especially for the rock formation with f=5-10.
--high wear resistance and impact-resistant toughness, long drilling life, drilling efficiency can be promoted sharply in penetration of soft and medium soft formation, laber intensity can be reduced.
Specifications:
Model
specification
PDC cutter
blades
rock formation
working way
LJ4131J/M333
4 5/8″
GK, SDB
4
conglomerate
cutting, crush
LJ6134J/M333
6″
GK, SDB
6
conglomerate
cutting, crush
LJ4195J/M222
8 ½″
GK, SDB
4
conglomerate
cutting, crush
LJ5195J/M322
8 ½″
GK, SDB
5
conglomerate
cutting, crush
LJ6195J/M322
8 ½″
GK, SDB
6
conglomerate
cutting, crush
LJ5195J/M232
8 ¾″
GK, SDB
5
conglomerate
cutting, crush
LJ5195J/M322
9 ½″
GK, SDB
5
conglomerate
cutting, crush
LJ6195J/M323
9 ½″
GK, SDB
6
conglomerate
cutting, crush
LJ5194J/M323
12 ¼″
GK, SDB
5
conglomerate
cutting, crush
LJ6194J/M323
12 ¼″
GK, SDB
6
conglomerate
cutting, crush
LJ6195J/M323
12 ¼″
GK, SDB
6
conglomerate
cutting, crush
We also can design PDC bits according to customer requirements.
Service:
Guilin Star Diamond can supply all kinds of PDC coring and non-coring bits, PDC oil bits and PDC anchor bits. PDC bit can be widely used in the fields of geological exploration, coal mining, water conservancy and hydropower, construction of road and railway, and oil well exploration.
MOB: 008613667733724
TEL:+86-773-5822066
FAX:+86-773-5822066
S: glstardiamond
Nano gear oil treatment for cement industry
Industrial lubricant additive
1 Power saving 5%-30%
2 Antiwear & friction
3 Improving efficiency
4.Extend service life
The instruction of Dunba Power Saving & Maintaining additives
for heavy equipment
1.Discription
Dunba Power Saving & Maintaining addtives for oil for heavy equipment is a power saving and environmental friendly products compound of Nano Metal Particle,polymer,and multifunctional additives,which is made of the newest technological fruit prduced by"national 863 plan".We have the intellectual property rights(Patent No. ZL200810032849.1). It has not only function of
super lubricating,selfrepairing but also of good antioxidation,and good antifriction.
2.Characteristic
1)
Save power 5%-30%,lubricant 50%;
2)Improving the resisting pressure and load capacity of lubricating oil, reducing impact load, and assure the minimum friction;
3)repair attrition dynamically,maitain equipment,reduce repair cost of the equipment effectively;
4)antiwear,reduce friction,reduce shake,cooling,reduce noise,improve efficiency,prolong the service lfe of equipment;
5)Mixed in virous lubricants,not changing the performance of lubricating oil,extend the period of changing oil;
6)Clean oil dirt,prevent malfunction,reduce mechanical accident;
7)The usage is simple and convenient,no damage for the construction of equipment.
3,Technical Characteristic
1)This product is produced by organic and inorganic nano materials, not only possessing the function of strong lubricating & resisting extreme pressure of organic material, but also having intelligent self-repair performance of inorganic nano material. In the process of friction, the nano particle is induced by the friction heat, rapidly penetrating into the micro defect on the surface of metal friction, quickly repairing uneven friction surface, and forming extra smooth,high hardness friction surface, not only reducing the friction coefficient, but also improving the performance of extreme pressure and anti-wear, thereby achieving the effect of power saving ,noise reduction and extending service life.
2)Stable performance,anti-oxidation,excellent dispersivity, mixed with any lubricating oil, no damage for the human body, environmental product.
3)Maintaining the equipment under extreme pressure, make the minimum friction.
Metal Friction surface comparison after and before using Dunba
(after) (before)
4.Application
This product is stable in various lubricants,is suitable for power-saving and maintainance of motive power and merchanical equipment in various fields such as steel,oil field,industry and mining,concrete,electricity,train,ship and other transportation.
5,Usage Instruction
Add mixed product to lubrication system, normal usage is about 1% of the total lubricating oil. If you have any problem, please consult the manufacturer.
6,Notice
1)Keep in normal temperature and avoid sunlight
2)Protect from impurity and water
3)Don't drink and avoid long-time skin contact
1 Power saving 5%-30%
2 Antiwear & friction
3 Improving efficiency
4.Extend service life
The instruction of Dunba Power Saving & Maintaining additives
for heavy equipment
1.Discription
Dunba Power Saving & Maintaining addtives for oil for heavy equipment is a power saving and environmental friendly products compound of Nano Metal Particle,polymer,and multifunctional additives,which is made of the newest technological fruit prduced by"national 863 plan".We have the intellectual property rights(Patent No. ZL200810032849.1). It has not only function of
super lubricating,selfrepairing but also of good antioxidation,and good antifriction.
2.Characteristic
1)
Save power 5%-30%,lubricant 50%;
2)Improving the resisting pressure and load capacity of lubricating oil, reducing impact load, and assure the minimum friction;
3)repair attrition dynamically,maitain equipment,reduce repair cost of the equipment effectively;
4)antiwear,reduce friction,reduce shake,cooling,reduce noise,improve efficiency,prolong the service lfe of equipment;
5)Mixed in virous lubricants,not changing the performance of lubricating oil,extend the period of changing oil;
6)Clean oil dirt,prevent malfunction,reduce mechanical accident;
7)The usage is simple and convenient,no damage for the construction of equipment.
3,Technical Characteristic
1)This product is produced by organic and inorganic nano materials, not only possessing the function of strong lubricating & resisting extreme pressure of organic material, but also having intelligent self-repair performance of inorganic nano material. In the process of friction, the nano particle is induced by the friction heat, rapidly penetrating into the micro defect on the surface of metal friction, quickly repairing uneven friction surface, and forming extra smooth,high hardness friction surface, not only reducing the friction coefficient, but also improving the performance of extreme pressure and anti-wear, thereby achieving the effect of power saving ,noise reduction and extending service life.
2)Stable performance,anti-oxidation,excellent dispersivity, mixed with any lubricating oil, no damage for the human body, environmental product.
3)Maintaining the equipment under extreme pressure, make the minimum friction.
Metal Friction surface comparison after and before using Dunba
(after) (before)
4.Application
This product is stable in various lubricants,is suitable for power-saving and maintainance of motive power and merchanical equipment in various fields such as steel,oil field,industry and mining,concrete,electricity,train,ship and other transportation.
5,Usage Instruction
Add mixed product to lubrication system, normal usage is about 1% of the total lubricating oil. If you have any problem, please consult the manufacturer.
6,Notice
1)Keep in normal temperature and avoid sunlight
2)Protect from impurity and water
3)Don't drink and avoid long-time skin contact
Nano gear oil treatment
1 Power saving 5%-30%
2 Antiwear & friction
3 Improving efficiency
4.Extend service life
The instruction of Dunba Power Saving & Maintaining additives
for heavy equipment
1.Discription
Dunba Power Saving & Maintaining addtives for oil for heavy equipment is a power saving and environmental friendly products as compound of Nano Metal Particle,polymer,and multifunctional additives,which is made of the newest technological fruit prduced by"national 863 plan".We have the intellectual property rights(Patent No. ZL200810032849.1).It has not only function of super lubricating,selfrepairing but also of good antioxidation,and good antifriction.
2.Characteristic
1)Save power 5%-30%,lubricant 50%;
2)Improving the resisting pressure and load capacity of lubricating oil, reducing impact load, and assure the minimum friction;
3)repair attrition dynamically,maitain equipment,reduce repair cost of the equipment effectively;
4)antiwear,reduce friction,reduce shake,cooling,reduce noise,improve efficiency,prolong the service lfe of equipment;
5)Mixed in virous lubricants,not changing the performance of lubricating oil,extend the period of changing oil;
6)Clean oil dirt,prevent malfunction,reduce mechanical accident;
7)The usage is simple and convenient,no damage for the construction of equipment.
3,Technical Characteristic
1)This product is produced by organic and inorganic nano materials, not only possessing the function of strong lubricating & resisting extreme pressure of organic material, but also having intelligent self-repair performance of inorganic nano material. In the process of friction, the nano particle is induced by the friction heat, rapidly penetrating into the micro defect on the surface of metal friction, quickly repairing uneven friction surface, and forming extra smooth,high hardness friction surface, not only reducing the friction coefficient, but also improving the performance of extreme pressure and anti-wear, thereby achieving the effect of power saving ,noise reduction and extending service life.
2)Stable performance,anti-oxidation,excellent dispersivity, mixed with any lubricating oil, no damage for the human body, environmental product.
3)Maintaining the equipment under extreme pressure, make the minimum friction.
Metal Friction surface comparison after and before using Dunba
(after) (before)
4.Application
This product is stable in various lubricants,is suitable for power-saving and maintainance of motive power and merchanical equipment in various fields such as steel,oil field,industry and mining,concrete,electricity,train,ship and other transportation.
5,Usage Instruction
Add mixed product to lubrication system, normal usage is about 1% of the total lubricating oil. If you have any problem, please consult the manufacturer.
6,Notice
1)Keep in normal temperature and avoid sunlight
2)Protect from impurity and water
3)Don't drink and avoid skin contact for long time
2 Antiwear & friction
3 Improving efficiency
4.Extend service life
The instruction of Dunba Power Saving & Maintaining additives
for heavy equipment
1.Discription
Dunba Power Saving & Maintaining addtives for oil for heavy equipment is a power saving and environmental friendly products as compound of Nano Metal Particle,polymer,and multifunctional additives,which is made of the newest technological fruit prduced by"national 863 plan".We have the intellectual property rights(Patent No. ZL200810032849.1).It has not only function of super lubricating,selfrepairing but also of good antioxidation,and good antifriction.
2.Characteristic
1)Save power 5%-30%,lubricant 50%;
2)Improving the resisting pressure and load capacity of lubricating oil, reducing impact load, and assure the minimum friction;
3)repair attrition dynamically,maitain equipment,reduce repair cost of the equipment effectively;
4)antiwear,reduce friction,reduce shake,cooling,reduce noise,improve efficiency,prolong the service lfe of equipment;
5)Mixed in virous lubricants,not changing the performance of lubricating oil,extend the period of changing oil;
6)Clean oil dirt,prevent malfunction,reduce mechanical accident;
7)The usage is simple and convenient,no damage for the construction of equipment.
3,Technical Characteristic
1)This product is produced by organic and inorganic nano materials, not only possessing the function of strong lubricating & resisting extreme pressure of organic material, but also having intelligent self-repair performance of inorganic nano material. In the process of friction, the nano particle is induced by the friction heat, rapidly penetrating into the micro defect on the surface of metal friction, quickly repairing uneven friction surface, and forming extra smooth,high hardness friction surface, not only reducing the friction coefficient, but also improving the performance of extreme pressure and anti-wear, thereby achieving the effect of power saving ,noise reduction and extending service life.
2)Stable performance,anti-oxidation,excellent dispersivity, mixed with any lubricating oil, no damage for the human body, environmental product.
3)Maintaining the equipment under extreme pressure, make the minimum friction.
Metal Friction surface comparison after and before using Dunba
(after) (before)
4.Application
This product is stable in various lubricants,is suitable for power-saving and maintainance of motive power and merchanical equipment in various fields such as steel,oil field,industry and mining,concrete,electricity,train,ship and other transportation.
5,Usage Instruction
Add mixed product to lubrication system, normal usage is about 1% of the total lubricating oil. If you have any problem, please consult the manufacturer.
6,Notice
1)Keep in normal temperature and avoid sunlight
2)Protect from impurity and water
3)Don't drink and avoid skin contact for long time
Nano hydraulic additives for hydraulic equipment
Industrial lubricant additive
1 Power saving 5%-30%
2 Antiwear & friction
3 Improving efficiency
4.Extend service life
The instruction of Dunba Power Saving & Maintaining additives
for heavy equipment
1.Discription
Dunba Power Saving & Maintaining addtives for oil for heavy equipment is a power saving and environmental friendly products compound of Nano Metal Particle,polymer,and multifunctional additives,which is made of the newest technological fruit prduced by"national 863 plan".We have the intellectual property rights(Patent No. ZL200810032849.1). It has not only function of
super lubricating,selfrepairing but also of good antioxidation,and good antifriction.
2.Characteristic
1)
Save power 5%-30%,lubricant 50%;
2)Improving the resisting pressure and load capacity of lubricating oil, reducing impact load, and assure the minimum friction;
3)repair attrition dynamically,maitain equipment,reduce repair cost of the equipment effectively;
4)antiwear,reduce friction,reduce shake,cooling,reduce noise,improve efficiency,prolong the service lfe of equipment;
5)Mixed in virous lubricants,not changing the performance of lubricating oil,extend the period of changing oil;
6)Clean oil dirt,prevent malfunction,reduce mechanical accident;
7)The usage is simple and convenient,no damage for the construction of equipment.
3,Technical Characteristic
1)This product is produced by organic and inorganic nano materials, not only possessing the function of strong lubricating & resisting extreme pressure of organic material, but also having intelligent self-repair performance of inorganic nano material. In the process of friction, the nano particle is induced by the friction heat, rapidly penetrating into the micro defect on the surface of metal friction, quickly repairing uneven friction surface, and forming extra smooth,high hardness friction surface, not only reducing the friction coefficient, but also improving the performance of extreme pressure and anti-wear, thereby achieving the effect of power saving ,noise reduction and extending service life.
2)Stable performance,anti-oxidation,excellent dispersivity, mixed with any lubricating oil, no damage for the human body, environmental product.
3)Maintaining the equipment under extreme pressure, make the minimum friction.
Metal Friction surface comparison after and before using Dunba
(after) (before)
4.Application
This product is stable in various lubricants,is suitable for power-saving and maintainance of motive power and merchanical equipment in various fields such as steel,oil field,industry and mining,concrete,electricity,train,ship and other transportation.
5,Usage Instruction
Add mixed product to lubrication system, normal usage is about 1% of the total lubricating oil. If you have any problem, please consult the manufacturer.
6,Notice
1)Keep in normal temperature and avoid sunlight
2)Protect from impurity and water
3)Don't drink and avoid long-time skin contact
1 Power saving 5%-30%
2 Antiwear & friction
3 Improving efficiency
4.Extend service life
The instruction of Dunba Power Saving & Maintaining additives
for heavy equipment
1.Discription
Dunba Power Saving & Maintaining addtives for oil for heavy equipment is a power saving and environmental friendly products compound of Nano Metal Particle,polymer,and multifunctional additives,which is made of the newest technological fruit prduced by"national 863 plan".We have the intellectual property rights(Patent No. ZL200810032849.1). It has not only function of
super lubricating,selfrepairing but also of good antioxidation,and good antifriction.
2.Characteristic
1)
Save power 5%-30%,lubricant 50%;
2)Improving the resisting pressure and load capacity of lubricating oil, reducing impact load, and assure the minimum friction;
3)repair attrition dynamically,maitain equipment,reduce repair cost of the equipment effectively;
4)antiwear,reduce friction,reduce shake,cooling,reduce noise,improve efficiency,prolong the service lfe of equipment;
5)Mixed in virous lubricants,not changing the performance of lubricating oil,extend the period of changing oil;
6)Clean oil dirt,prevent malfunction,reduce mechanical accident;
7)The usage is simple and convenient,no damage for the construction of equipment.
3,Technical Characteristic
1)This product is produced by organic and inorganic nano materials, not only possessing the function of strong lubricating & resisting extreme pressure of organic material, but also having intelligent self-repair performance of inorganic nano material. In the process of friction, the nano particle is induced by the friction heat, rapidly penetrating into the micro defect on the surface of metal friction, quickly repairing uneven friction surface, and forming extra smooth,high hardness friction surface, not only reducing the friction coefficient, but also improving the performance of extreme pressure and anti-wear, thereby achieving the effect of power saving ,noise reduction and extending service life.
2)Stable performance,anti-oxidation,excellent dispersivity, mixed with any lubricating oil, no damage for the human body, environmental product.
3)Maintaining the equipment under extreme pressure, make the minimum friction.
Metal Friction surface comparison after and before using Dunba
(after) (before)
4.Application
This product is stable in various lubricants,is suitable for power-saving and maintainance of motive power and merchanical equipment in various fields such as steel,oil field,industry and mining,concrete,electricity,train,ship and other transportation.
5,Usage Instruction
Add mixed product to lubrication system, normal usage is about 1% of the total lubricating oil. If you have any problem, please consult the manufacturer.
6,Notice
1)Keep in normal temperature and avoid sunlight
2)Protect from impurity and water
3)Don't drink and avoid long-time skin contact
Nano hydraulic oil additive
1 Power saving 5%-30%
2 Antiwear & friction
3 Improving efficiency
4.Extend service life
The instruction of Dunba Power Saving & Maintaining additives
for heavy equipment
1.Discription
Dunba Power Saving & Maintaining addtives for oil for heavy equipment is a power saving and environmental friendly products as compound of Nano Metal Particle,polymer,and multifunctional additives,which is made of the newest technological fruit prduced by"national 863 plan".We have the intellectual property rights(Patent No. ZL200810032849.1).It has not only function of super lubricating,selfrepairing but also of good antioxidation,and good antifriction.
2.Characteristic
1)Save power 5%-30%,lubricant 50%;
2)Improving the resisting pressure and load capacity of lubricating oil, reducing impact load, and assure the minimum friction;
3)repair attrition dynamically,maitain equipment,reduce repair cost of the equipment effectively;
4)antiwear,reduce friction,reduce shake,cooling,reduce noise,improve efficiency,prolong the service lfe of equipment;
5)Mixed in virous lubricants,not changing the performance of lubricating oil,extend the period of changing oil;
6)Clean oil dirt,prevent malfunction,reduce mechanical accident;
7)The usage is simple and convenient,no damage for the construction of equipment.
3,Technical Characteristic
1)This product is produced by organic and inorganic nano materials, not only possessing the function of strong lubricating & resisting extreme pressure of organic material, but also having intelligent self-repair performance of inorganic nano material. In the process of friction, the nano particle is induced by the friction heat, rapidly penetrating into the micro defect on the surface of metal friction, quickly repairing uneven friction surface, and forming extra smooth,high hardness friction surface, not only reducing the friction coefficient, but also improving the performance of extreme pressure and anti-wear, thereby achieving the effect of power saving ,noise reduction and extending service life.
2)Stable performance,anti-oxidation,excellent dispersivity, mixed with any lubricating oil, no damage for the human body, environmental product.
3)Maintaining the equipment under extreme pressure, make the minimum friction.
Metal Friction surface comparison after and before using Dunba
(after) (before)
4.Application
This product is stable in various lubricants,is suitable for power-saving and maintainance of motive power and merchanical equipment in various fields such as steel,oil field,industry and mining,concrete,electricity,train,ship and other transportation.
5,Usage Instruction
Add mixed product to lubrication system, normal usage is about 1% of the total lubricating oil. If you have any problem, please consult the manufacturer.
6,Notice
1)Keep in normal temperature and avoid sunlight
2)Protect from impurity and water
3)Don't drink and avoid skin contact for long time
2 Antiwear & friction
3 Improving efficiency
4.Extend service life
The instruction of Dunba Power Saving & Maintaining additives
for heavy equipment
1.Discription
Dunba Power Saving & Maintaining addtives for oil for heavy equipment is a power saving and environmental friendly products as compound of Nano Metal Particle,polymer,and multifunctional additives,which is made of the newest technological fruit prduced by"national 863 plan".We have the intellectual property rights(Patent No. ZL200810032849.1).It has not only function of super lubricating,selfrepairing but also of good antioxidation,and good antifriction.
2.Characteristic
1)Save power 5%-30%,lubricant 50%;
2)Improving the resisting pressure and load capacity of lubricating oil, reducing impact load, and assure the minimum friction;
3)repair attrition dynamically,maitain equipment,reduce repair cost of the equipment effectively;
4)antiwear,reduce friction,reduce shake,cooling,reduce noise,improve efficiency,prolong the service lfe of equipment;
5)Mixed in virous lubricants,not changing the performance of lubricating oil,extend the period of changing oil;
6)Clean oil dirt,prevent malfunction,reduce mechanical accident;
7)The usage is simple and convenient,no damage for the construction of equipment.
3,Technical Characteristic
1)This product is produced by organic and inorganic nano materials, not only possessing the function of strong lubricating & resisting extreme pressure of organic material, but also having intelligent self-repair performance of inorganic nano material. In the process of friction, the nano particle is induced by the friction heat, rapidly penetrating into the micro defect on the surface of metal friction, quickly repairing uneven friction surface, and forming extra smooth,high hardness friction surface, not only reducing the friction coefficient, but also improving the performance of extreme pressure and anti-wear, thereby achieving the effect of power saving ,noise reduction and extending service life.
2)Stable performance,anti-oxidation,excellent dispersivity, mixed with any lubricating oil, no damage for the human body, environmental product.
3)Maintaining the equipment under extreme pressure, make the minimum friction.
Metal Friction surface comparison after and before using Dunba
(after) (before)
4.Application
This product is stable in various lubricants,is suitable for power-saving and maintainance of motive power and merchanical equipment in various fields such as steel,oil field,industry and mining,concrete,electricity,train,ship and other transportation.
5,Usage Instruction
Add mixed product to lubrication system, normal usage is about 1% of the total lubricating oil. If you have any problem, please consult the manufacturer.
6,Notice
1)Keep in normal temperature and avoid sunlight
2)Protect from impurity and water
3)Don't drink and avoid skin contact for long time
Nano industrial lubricant additives for machinery equipment
1. Nano industrial lubricant additive
2. Self-repair & anti-wear
3. Extend service life
4.Reduce emission
5.Boost power
Nano industrial lubricant additives for machinery equipment integrates nano-metal and organic nano-materials that activate special self-repairing and anti-wear protection in varying working environments.
Mixed different nano lubricant additives in the lubricating oil after 24 hours,
please see the comparison picture:
Hot sale nano lubricant additives
Dunba Nano luricant additives
Major Functions
Saving energy, maintaining and extending service life of the equipment.
Repairing wear dynamically, Removing oil dirt, improving the power.
Friction reduction, anti-wear, decreasing vibration, cooling and denoising.
Preventing pitting corrosion on the friction location, protecting power system comprehensively.
Can be dispersed evenly in a variety of lubricants.
Application: Applicable to solve the friction, wear and maintaining issues of machinery equipment and ships in various working conditions.
How to use
Add the product to Lubricating system. Normal usage is 1-3% of the total Lubricating oil.
Notice:
1. Not inflammable and explosive, no corrosion
2. Don’t drink and avoid skin contact for long time.
3. Protect from impurity and water.
4. Keep in normal temperature and avoid sunlight.
2. Self-repair & anti-wear
3. Extend service life
4.Reduce emission
5.Boost power
Nano industrial lubricant additives for machinery equipment integrates nano-metal and organic nano-materials that activate special self-repairing and anti-wear protection in varying working environments.
Mixed different nano lubricant additives in the lubricating oil after 24 hours,
please see the comparison picture:
Hot sale nano lubricant additives
Dunba Nano luricant additives
Major Functions
Saving energy, maintaining and extending service life of the equipment.
Repairing wear dynamically, Removing oil dirt, improving the power.
Friction reduction, anti-wear, decreasing vibration, cooling and denoising.
Preventing pitting corrosion on the friction location, protecting power system comprehensively.
Can be dispersed evenly in a variety of lubricants.
Application: Applicable to solve the friction, wear and maintaining issues of machinery equipment and ships in various working conditions.
How to use
Add the product to Lubricating system. Normal usage is 1-3% of the total Lubricating oil.
Notice:
1. Not inflammable and explosive, no corrosion
2. Don’t drink and avoid skin contact for long time.
3. Protect from impurity and water.
4. Keep in normal temperature and avoid sunlight.
Nano lengine oil additives
Industrial lubricant additive
1 Power saving 5%-30%
2 Antiwear & friction
3 Improving efficiency
4.Extend service life
The instruction of Dunba Power Saving & Maintaining additives
1.Discription
Dunba Power Saving & Maintaining addtives for Diesel Generator set is a power saving and environmental friendly products compound of Nano Metal Particle,polymer,and multifunctional additives,which is made of the newest technological fruit prduced by"national 863 plan".We have the intellectual property rights(Patent No. ZL200810032849.1). It has not only function of
super lubricating, selfrepairing but also of good antioxidation,and good antifriction.
2.Characteristic
1)
Save power 5%-30%,lubricant 50%;
2)Improving the resisting pressure and load capacity of lubricating oil, reducing impact load, and assure the minimum friction;
3)repair attrition dynamically,maitain equipment,reduce repair cost of the equipment effectively;
4)antiwear,reduce friction,reduce shake,cooling,reduce noise,improve efficiency,prolong the service lfe of equipment;
5)Mixed in virous lubricants,not changing the performance of lubricating oil,extend the period of changing oil;
6)Clean oil dirt,prevent malfunction,reduce mechanical accident;
7)The usage is simple and convenient,no damage for the construction of equipment.
3,Technical Characteristic
1)This product is produced by organic and inorganic nano materials, not only possessing the function of strong lubricating & resisting extreme pressure of organic material, but also having intelligent self-repair performance of inorganic nano material. In the process of friction, the nano particle is induced by the friction heat, rapidly penetrating into the micro defect on the surface of metal friction, quickly repairing uneven friction surface, and forming extra smooth,high hardness friction surface, not only reducing the friction coefficient, but also improving the performance of extreme pressure and anti-wear, thereby achieving the effect of power saving ,noise reduction and extending service life.
2)Stable performance,anti-oxidation,excellent dispersivity, mixed with any lubricating oil, no damage for the human body, environmental product.
3)Maintaining the equipment under extreme pressure, make the minimum friction.
Metal Friction surface comparison after and before using Dunba
(after) (before)
4.Application
This product is stable in various lubricants,is suitable for power-saving and maintainance of motive power and merchanical equipment in various fields such as steel,oil field,industry and mining,concrete,electricity,train,ship and other transportation.
5,Usage Instruction
Add mixed product to lubrication system, normal usage is about 1% of the total lubricating oil. If you have any problem, please consult the manufacturer.
6,Notice
1)Keep in normal temperature and avoid sunlight
2)Protect from impurity and water
3)Don't drink and avoid long-time skin contact
1 Power saving 5%-30%
2 Antiwear & friction
3 Improving efficiency
4.Extend service life
The instruction of Dunba Power Saving & Maintaining additives
1.Discription
Dunba Power Saving & Maintaining addtives for Diesel Generator set is a power saving and environmental friendly products compound of Nano Metal Particle,polymer,and multifunctional additives,which is made of the newest technological fruit prduced by"national 863 plan".We have the intellectual property rights(Patent No. ZL200810032849.1). It has not only function of
super lubricating, selfrepairing but also of good antioxidation,and good antifriction.
2.Characteristic
1)
Save power 5%-30%,lubricant 50%;
2)Improving the resisting pressure and load capacity of lubricating oil, reducing impact load, and assure the minimum friction;
3)repair attrition dynamically,maitain equipment,reduce repair cost of the equipment effectively;
4)antiwear,reduce friction,reduce shake,cooling,reduce noise,improve efficiency,prolong the service lfe of equipment;
5)Mixed in virous lubricants,not changing the performance of lubricating oil,extend the period of changing oil;
6)Clean oil dirt,prevent malfunction,reduce mechanical accident;
7)The usage is simple and convenient,no damage for the construction of equipment.
3,Technical Characteristic
1)This product is produced by organic and inorganic nano materials, not only possessing the function of strong lubricating & resisting extreme pressure of organic material, but also having intelligent self-repair performance of inorganic nano material. In the process of friction, the nano particle is induced by the friction heat, rapidly penetrating into the micro defect on the surface of metal friction, quickly repairing uneven friction surface, and forming extra smooth,high hardness friction surface, not only reducing the friction coefficient, but also improving the performance of extreme pressure and anti-wear, thereby achieving the effect of power saving ,noise reduction and extending service life.
2)Stable performance,anti-oxidation,excellent dispersivity, mixed with any lubricating oil, no damage for the human body, environmental product.
3)Maintaining the equipment under extreme pressure, make the minimum friction.
Metal Friction surface comparison after and before using Dunba
(after) (before)
4.Application
This product is stable in various lubricants,is suitable for power-saving and maintainance of motive power and merchanical equipment in various fields such as steel,oil field,industry and mining,concrete,electricity,train,ship and other transportation.
5,Usage Instruction
Add mixed product to lubrication system, normal usage is about 1% of the total lubricating oil. If you have any problem, please consult the manufacturer.
6,Notice
1)Keep in normal temperature and avoid sunlight
2)Protect from impurity and water
3)Don't drink and avoid long-time skin contact
Nano lube oil additive
1 Power saving 5%-30%
2 Antiwear & friction
3 Improving efficiency
4.Extend service life
The instruction of Dunba Power Saving & Maintaining additives
for heavy equipment
1.Discription
Dunba Power Saving & Maintaining addtives for oil for heavy equipment is a power saving and environmental friendly products as compound of Nano Metal Particle,polymer,and multifunctional additives,which is made of the newest technological fruit prduced by"national 863 plan".We have the intellectual property rights(Patent No. ZL200810032849.1).It has not only function of super lubricating,selfrepairing but also of good antioxidation,and good antifriction.
2.Characteristic
1)Save power 5%-30%,lubricant 50%;
2)Improving the resisting pressure and load capacity of lubricating oil, reducing impact load, and assure the minimum friction;
3)repair attrition dynamically,maitain equipment,reduce repair cost of the equipment effectively;
4)antiwear,reduce friction,reduce shake,cooling,reduce noise,improve efficiency,prolong the service lfe of equipment;
5)Mixed in virous lubricants,not changing the performance of lubricating oil,extend the period of changing oil;
6)Clean oil dirt,prevent malfunction,reduce mechanical accident;
7)The usage is simple and convenient,no damage for the construction of equipment.
3,Technical Characteristic
1)This product is produced by organic and inorganic nano materials, not only possessing the function of strong lubricating & resisting extreme pressure of organic material, but also having intelligent self-repair performance of inorganic nano material. In the process of friction, the nano particle is induced by the friction heat, rapidly penetrating into the micro defect on the surface of metal friction, quickly repairing uneven friction surface, and forming extra smooth,high hardness friction surface, not only reducing the friction coefficient, but also improving the performance of extreme pressure and anti-wear, thereby achieving the effect of power saving ,noise reduction and extending service life.
2)Stable performance,anti-oxidation,excellent dispersivity, mixed with any lubricating oil, no damage for the human body, environmental product.
3)Maintaining the equipment under extreme pressure, make the minimum friction.
Metal Friction surface comparison after and before using Dunba
(after) (before)
4.Application
This product is stable in various lubricants,is suitable for power-saving and maintainance of motive power and merchanical equipment in various fields such as steel,oil field,industry and mining,concrete,electricity,train,ship and other transportation.
5,Usage Instruction
Add mixed product to lubrication system, normal usage is about 1% of the total lubricating oil. If you have any problem, please consult the manufacturer.
6,Notice
1)Keep in normal temperature and avoid sunlight
2)Protect from impurity and water
3)Don't drink and avoid skin contact for long time
2 Antiwear & friction
3 Improving efficiency
4.Extend service life
The instruction of Dunba Power Saving & Maintaining additives
for heavy equipment
1.Discription
Dunba Power Saving & Maintaining addtives for oil for heavy equipment is a power saving and environmental friendly products as compound of Nano Metal Particle,polymer,and multifunctional additives,which is made of the newest technological fruit prduced by"national 863 plan".We have the intellectual property rights(Patent No. ZL200810032849.1).It has not only function of super lubricating,selfrepairing but also of good antioxidation,and good antifriction.
2.Characteristic
1)Save power 5%-30%,lubricant 50%;
2)Improving the resisting pressure and load capacity of lubricating oil, reducing impact load, and assure the minimum friction;
3)repair attrition dynamically,maitain equipment,reduce repair cost of the equipment effectively;
4)antiwear,reduce friction,reduce shake,cooling,reduce noise,improve efficiency,prolong the service lfe of equipment;
5)Mixed in virous lubricants,not changing the performance of lubricating oil,extend the period of changing oil;
6)Clean oil dirt,prevent malfunction,reduce mechanical accident;
7)The usage is simple and convenient,no damage for the construction of equipment.
3,Technical Characteristic
1)This product is produced by organic and inorganic nano materials, not only possessing the function of strong lubricating & resisting extreme pressure of organic material, but also having intelligent self-repair performance of inorganic nano material. In the process of friction, the nano particle is induced by the friction heat, rapidly penetrating into the micro defect on the surface of metal friction, quickly repairing uneven friction surface, and forming extra smooth,high hardness friction surface, not only reducing the friction coefficient, but also improving the performance of extreme pressure and anti-wear, thereby achieving the effect of power saving ,noise reduction and extending service life.
2)Stable performance,anti-oxidation,excellent dispersivity, mixed with any lubricating oil, no damage for the human body, environmental product.
3)Maintaining the equipment under extreme pressure, make the minimum friction.
Metal Friction surface comparison after and before using Dunba
(after) (before)
4.Application
This product is stable in various lubricants,is suitable for power-saving and maintainance of motive power and merchanical equipment in various fields such as steel,oil field,industry and mining,concrete,electricity,train,ship and other transportation.
5,Usage Instruction
Add mixed product to lubrication system, normal usage is about 1% of the total lubricating oil. If you have any problem, please consult the manufacturer.
6,Notice
1)Keep in normal temperature and avoid sunlight
2)Protect from impurity and water
3)Don't drink and avoid skin contact for long time
Nano lube oil agent for medium and small equipment
lube oil agent
1.energy-saving,lubricant-saving
2.antiwear,selfreparing
3.shakeproof,reduce noisy
4.extending the life
The instruction of Dunba Power Saving & Maintaining additives
for medium and small equipment
1.Discription
Dunba Power Saving & Maintaining addtives for medium and small equipment is a power saving and environmental friendly products as compound of Nano Metal Particle,polymer,and multifunctional additives,which is made of the newest technological fruit prduced by"national 863 plan".We have the intellectual property rights(Patent No. ZL200810032849.1).It have not only function of super lubricating,selfrepairing but also of good antioxidation,and good antifriction.
2.Characteristic
1)Save power 5%-30%,lubricant 50%;
2)good carrying capacity,improve power take-off,increase economic benifit;
3)repair attrition dynamically,maitain equipment,reduce repair cost of the equipment effectively;
4)antiwear,reduce friction,reduce shake,cooling,reduce noise,improve efficiency,prolong the service lfe of equipment;
5)Mixed in virous lubricants,not changing the performance of lubricating oil,extend the period of changing oil;
6)Clean oil dirt,prevent malfunction,reduce mechanical accident;
7)The usage is simple and convenient,no damage for the construction of equipment.
3,Technical Characteristic
1)This product is produced by organic and inorganic nano materials, not only possessing the function of strong lubricating & resisting extreme pressure of organic material, but also having intelligent self-repair performance of inorganic nano material. In the process of friction, the nano particle is induced by the friction heat, rapidly penetrating into the micro defect on the surface of metal friction, quickly repairing uneven friction surface, and forming extra smooth,high hardness friction surface, not only reducing the friction coefficient, but also improving the performance of extreme pressure and anti-wear, thereby achieving the effect of power saving ,noise reduction and extending service life.
2)Stable performance,anti-oxidation,excellent dispersivity, mixed with any lubricating oil, no damage for the human body, environmental product.
3)Maintaining the equipment under extreme pressure, make the minimum friction.
Metal Friction surface comparison after and before using Dunba
(after) (before)
4.Application
This product is stable in various lubricants,is suitable for power-saving and maintainance of midium and small equipment in the fields of spinning,papermaking,chemical industry.
5,Usage Instruction
Add mixed product to lubrication system, normal usage is about 1%-3% of the total lubricating oil. If you have any problem, please consult the manufacturer.
6,Notice
1)Keep in normal temperature and avoid sunlight
2)Protect from impurity and water
3)Don’t drink and avoid skin contact for long time
1.energy-saving,lubricant-saving
2.antiwear,selfreparing
3.shakeproof,reduce noisy
4.extending the life
The instruction of Dunba Power Saving & Maintaining additives
for medium and small equipment
1.Discription
Dunba Power Saving & Maintaining addtives for medium and small equipment is a power saving and environmental friendly products as compound of Nano Metal Particle,polymer,and multifunctional additives,which is made of the newest technological fruit prduced by"national 863 plan".We have the intellectual property rights(Patent No. ZL200810032849.1).It have not only function of super lubricating,selfrepairing but also of good antioxidation,and good antifriction.
2.Characteristic
1)Save power 5%-30%,lubricant 50%;
2)good carrying capacity,improve power take-off,increase economic benifit;
3)repair attrition dynamically,maitain equipment,reduce repair cost of the equipment effectively;
4)antiwear,reduce friction,reduce shake,cooling,reduce noise,improve efficiency,prolong the service lfe of equipment;
5)Mixed in virous lubricants,not changing the performance of lubricating oil,extend the period of changing oil;
6)Clean oil dirt,prevent malfunction,reduce mechanical accident;
7)The usage is simple and convenient,no damage for the construction of equipment.
3,Technical Characteristic
1)This product is produced by organic and inorganic nano materials, not only possessing the function of strong lubricating & resisting extreme pressure of organic material, but also having intelligent self-repair performance of inorganic nano material. In the process of friction, the nano particle is induced by the friction heat, rapidly penetrating into the micro defect on the surface of metal friction, quickly repairing uneven friction surface, and forming extra smooth,high hardness friction surface, not only reducing the friction coefficient, but also improving the performance of extreme pressure and anti-wear, thereby achieving the effect of power saving ,noise reduction and extending service life.
2)Stable performance,anti-oxidation,excellent dispersivity, mixed with any lubricating oil, no damage for the human body, environmental product.
3)Maintaining the equipment under extreme pressure, make the minimum friction.
Metal Friction surface comparison after and before using Dunba
(after) (before)
4.Application
This product is stable in various lubricants,is suitable for power-saving and maintainance of midium and small equipment in the fields of spinning,papermaking,chemical industry.
5,Usage Instruction
Add mixed product to lubrication system, normal usage is about 1%-3% of the total lubricating oil. If you have any problem, please consult the manufacturer.
6,Notice
1)Keep in normal temperature and avoid sunlight
2)Protect from impurity and water
3)Don’t drink and avoid skin contact for long time
Nano lubricant additives for heavy equipment
1 Power saving 5%-30%
2 Antiwear & friction
3 Improving efficiency
4.Extend service life
The instruction of Dunba Power Saving & Maintaining additives
for heavy equipment
1.Discription
Dunba Power Saving & Maintaining addtives for oil for heavy equipment is a power saving and environmental friendly products as compound of Nano Metal Particle,polymer,and multifunctional additives,which is made of the newest technological fruit prduced by"national 863 plan".We have the intellectual property rights(Patent No. ZL200810032849.1).It has not only function of
super lubricating,selfrepairing but also of good antioxidation,and good antifriction.
2.Characteristic
1)
Save power 5%-30%,lubricant 50%;
2)Improving the resisting pressure and load capacity of lubricating oil, reducing impact load, and assure the minimum friction;
3)repair attrition dynamically,maitain equipment,reduce repair cost of the equipment effectively;
4)antiwear,reduce friction,reduce shake,cooling,reduce noise,improve efficiency,prolong the service lfe of equipment;
5)Mixed in virous lubricants,not changing the performance of lubricating oil,extend the period of changing oil;
6)Clean oil dirt,prevent malfunction,reduce mechanical accident;
7)The usage is simple and convenient,no damage for the construction of equipment.
3,Technical Characteristic
1)This product is produced by organic and inorganic nano materials, not only possessing the function of strong lubricating & resisting extreme pressure of organic material, but also having intelligent self-repair performance of inorganic nano material. In the process of friction, the nano particle is induced by the friction heat, rapidly penetrating into the micro defect on the surface of metal friction, quickly repairing uneven friction surface, and forming extra smooth,high hardness friction surface, not only reducing the friction coefficient, but also improving the performance of extreme pressure and anti-wear, thereby achieving the effect of power saving ,noise reduction and extending service life.
2)Stable performance,anti-oxidation,excellent dispersivity, mixed with any lubricating oil, no damage for the human body, environmental product.
3)Maintaining the equipment under extreme pressure, make the minimum friction.
Metal Friction surface comparison after and before using Dunba
(after) (before)
4.Application
This product is stable in various lubricants,is suitable for power-saving and maintainance of midium and small equipment in the fields of spinning,papermaking,chemical industry.
5,Usage Instruction
Add mixed product to lubrication system, normal usage is about 1%-3% of the total lubricating oil. If you have any problem, please consult the manufacturer.
6,Notice
1)Keep in normal temperature and avoid sunlight
2)Protect from impurity and water
3)Don’t drink and avoid skin contact for long time
2 Antiwear & friction
3 Improving efficiency
4.Extend service life
The instruction of Dunba Power Saving & Maintaining additives
for heavy equipment
1.Discription
Dunba Power Saving & Maintaining addtives for oil for heavy equipment is a power saving and environmental friendly products as compound of Nano Metal Particle,polymer,and multifunctional additives,which is made of the newest technological fruit prduced by"national 863 plan".We have the intellectual property rights(Patent No. ZL200810032849.1).It has not only function of
super lubricating,selfrepairing but also of good antioxidation,and good antifriction.
2.Characteristic
1)
Save power 5%-30%,lubricant 50%;
2)Improving the resisting pressure and load capacity of lubricating oil, reducing impact load, and assure the minimum friction;
3)repair attrition dynamically,maitain equipment,reduce repair cost of the equipment effectively;
4)antiwear,reduce friction,reduce shake,cooling,reduce noise,improve efficiency,prolong the service lfe of equipment;
5)Mixed in virous lubricants,not changing the performance of lubricating oil,extend the period of changing oil;
6)Clean oil dirt,prevent malfunction,reduce mechanical accident;
7)The usage is simple and convenient,no damage for the construction of equipment.
3,Technical Characteristic
1)This product is produced by organic and inorganic nano materials, not only possessing the function of strong lubricating & resisting extreme pressure of organic material, but also having intelligent self-repair performance of inorganic nano material. In the process of friction, the nano particle is induced by the friction heat, rapidly penetrating into the micro defect on the surface of metal friction, quickly repairing uneven friction surface, and forming extra smooth,high hardness friction surface, not only reducing the friction coefficient, but also improving the performance of extreme pressure and anti-wear, thereby achieving the effect of power saving ,noise reduction and extending service life.
2)Stable performance,anti-oxidation,excellent dispersivity, mixed with any lubricating oil, no damage for the human body, environmental product.
3)Maintaining the equipment under extreme pressure, make the minimum friction.
Metal Friction surface comparison after and before using Dunba
(after) (before)
4.Application
This product is stable in various lubricants,is suitable for power-saving and maintainance of midium and small equipment in the fields of spinning,papermaking,chemical industry.
5,Usage Instruction
Add mixed product to lubrication system, normal usage is about 1%-3% of the total lubricating oil. If you have any problem, please consult the manufacturer.
6,Notice
1)Keep in normal temperature and avoid sunlight
2)Protect from impurity and water
3)Don’t drink and avoid skin contact for long time
Nano lubricant additives for heavy equipment
1 Power saving 5%-30%
2 Antiwear & friction
3 Improving efficiency
4.Extend service life
The instruction of Dunba Power Saving & Maintaining additives
for heavy equipment
1.Discription
Dunba Power Saving & Maintaining addtives for oil for heavy equipment is a power saving and environmental friendly products as compound of Nano Metal Particle,polymer,and multifunctional additives,which is made of the newest technological fruit prduced by"national 863 plan".We have the intellectual property rights(Patent No. ZL200810032849.1).It has not only function of
super lubricating,selfrepairing but also of good antioxidation,and good antifriction.
2.Characteristic
1)
Save power 5%-30%,lubricant 50%;
2)Improving the resisting pressure and load capacity of lubricating oil, reducing impact load, and assure the minimum friction;
3)repair attrition dynamically,maitain equipment,reduce repair cost of the equipment effectively;
4)antiwear,reduce friction,reduce shake,cooling,reduce noise,improve efficiency,prolong the service lfe of equipment;
5)Mixed in virous lubricants,not changing the performance of lubricating oil,extend the period of changing oil;
6)Clean oil dirt,prevent malfunction,reduce mechanical accident;
7)The usage is simple and convenient,no damage for the construction of equipment.
3,Technical Characteristic
1)This product is produced by organic and inorganic nano materials, not only possessing the function of strong lubricating & resisting extreme pressure of organic material, but also having intelligent self-repair performance of inorganic nano material. In the process of friction, the nano particle is induced by the friction heat, rapidly penetrating into the micro defect on the surface of metal friction, quickly repairing uneven friction surface, and forming extra smooth,high hardness friction surface, not only reducing the friction coefficient, but also improving the performance of extreme pressure and anti-wear, thereby achieving the effect of power saving ,noise reduction and extending service life.
2)Stable performance,anti-oxidation,excellent dispersivity, mixed with any lubricating oil, no damage for the human body, environmental product.
3)Maintaining the equipment under extreme pressure, make the minimum friction.
Metal Friction surface comparison after and before using Dunba
(after) (before)
4.Application
This product is stable in various lubricants,is suitable for power-saving and maintainance of midium and small equipment in the fields of spinning,papermaking,chemical industry.
5,Usage Instruction
Add mixed product to lubrication system, normal usage is about 1%-3% of the total lubricating oil. If you have any problem, please consult the manufacturer.
6,Notice
1)Keep in normal temperature and avoid sunlight
2)Protect from impurity and water
3)Don’t drink and avoid skin contact for long time
2 Antiwear & friction
3 Improving efficiency
4.Extend service life
The instruction of Dunba Power Saving & Maintaining additives
for heavy equipment
1.Discription
Dunba Power Saving & Maintaining addtives for oil for heavy equipment is a power saving and environmental friendly products as compound of Nano Metal Particle,polymer,and multifunctional additives,which is made of the newest technological fruit prduced by"national 863 plan".We have the intellectual property rights(Patent No. ZL200810032849.1).It has not only function of
super lubricating,selfrepairing but also of good antioxidation,and good antifriction.
2.Characteristic
1)
Save power 5%-30%,lubricant 50%;
2)Improving the resisting pressure and load capacity of lubricating oil, reducing impact load, and assure the minimum friction;
3)repair attrition dynamically,maitain equipment,reduce repair cost of the equipment effectively;
4)antiwear,reduce friction,reduce shake,cooling,reduce noise,improve efficiency,prolong the service lfe of equipment;
5)Mixed in virous lubricants,not changing the performance of lubricating oil,extend the period of changing oil;
6)Clean oil dirt,prevent malfunction,reduce mechanical accident;
7)The usage is simple and convenient,no damage for the construction of equipment.
3,Technical Characteristic
1)This product is produced by organic and inorganic nano materials, not only possessing the function of strong lubricating & resisting extreme pressure of organic material, but also having intelligent self-repair performance of inorganic nano material. In the process of friction, the nano particle is induced by the friction heat, rapidly penetrating into the micro defect on the surface of metal friction, quickly repairing uneven friction surface, and forming extra smooth,high hardness friction surface, not only reducing the friction coefficient, but also improving the performance of extreme pressure and anti-wear, thereby achieving the effect of power saving ,noise reduction and extending service life.
2)Stable performance,anti-oxidation,excellent dispersivity, mixed with any lubricating oil, no damage for the human body, environmental product.
3)Maintaining the equipment under extreme pressure, make the minimum friction.
Metal Friction surface comparison after and before using Dunba
(after) (before)
4.Application
This product is stable in various lubricants,is suitable for power-saving and maintainance of midium and small equipment in the fields of spinning,papermaking,chemical industry.
5,Usage Instruction
Add mixed product to lubrication system, normal usage is about 1%-3% of the total lubricating oil. If you have any problem, please consult the manufacturer.
6,Notice
1)Keep in normal temperature and avoid sunlight
2)Protect from impurity and water
3)Don’t drink and avoid skin contact for long time
80 cbm LPG Storage Tank Difference Size of Tanker
80 cbm LPG Storage Tank,Difference Size of Tanke
rCurb weight:5900kg
Corrosion Allowance:1mm
Good quality,with 3C
80 cbm LPG Storage Tank,Difference Size of Tanker
Cheng Li functional characteristics of liquefied petroleum gas storage tank:
1 pressure components of the product materials, dimensions and weld quality, operation quality, installation quality, safety devices and accessories within the strict qualification.
2.conventional tank materials on physical and chemical tests such as: mechanical properties and chemical composition.
their welded joints, weld, tank head, the pressure of the geometric location of each component through rigorous X-ray non-destructive testing and magnetic particle testing inspection.
3.seal on the product, pressure, and those who can affect the operation of product safety testing various technical indicators.
4 .A, B Class 100% ray weld inspection, II level qualified
C, D Class welds 100% magnetic particle inspection, I level qualified
Below is the details:
Product Name
CLG3000-80 LPG Storage Tank
Brand Name
ChengLiWei
Overall dimensions
mm
11866*3036*3610 mm
Tank Dimension
DN3000*18*11866(inner dia*thickness*length)
Fact cubage
m
3
80
Curb Weight
Kg
17900
Working pressure
Mpa
≤1.6
Testing hydraulic pressure
2.22
Testing pressure for gas density
1.77
Working temperature
≤50
The main material of tanker
Q345R
CLW is a name brand of China,we are professional manufacturer of various garbage trucks for organic or norganic garbage,converying powder,sand,stone and any other kinds of architecture materials.Our produce can also transport ore,coal in mine to obey our customers requirement.
All kinds of our produces passed ISO9001-2000 international quality system and 3C authentication
For more detailed information, please contact:
0086-13872880538
0086-722-3801805
FAX:0086-722-3801980
& you can leave me a message with your valid E-mail address,
so that i can reply you
rCurb weight:5900kg
Corrosion Allowance:1mm
Good quality,with 3C
80 cbm LPG Storage Tank,Difference Size of Tanker
Cheng Li functional characteristics of liquefied petroleum gas storage tank:
1 pressure components of the product materials, dimensions and weld quality, operation quality, installation quality, safety devices and accessories within the strict qualification.
2.conventional tank materials on physical and chemical tests such as: mechanical properties and chemical composition.
their welded joints, weld, tank head, the pressure of the geometric location of each component through rigorous X-ray non-destructive testing and magnetic particle testing inspection.
3.seal on the product, pressure, and those who can affect the operation of product safety testing various technical indicators.
4 .A, B Class 100% ray weld inspection, II level qualified
C, D Class welds 100% magnetic particle inspection, I level qualified
Below is the details:
Product Name
CLG3000-80 LPG Storage Tank
Brand Name
ChengLiWei
Overall dimensions
mm
11866*3036*3610 mm
Tank Dimension
DN3000*18*11866(inner dia*thickness*length)
Fact cubage
m
3
80
Curb Weight
Kg
17900
Working pressure
Mpa
≤1.6
Testing hydraulic pressure
2.22
Testing pressure for gas density
1.77
Working temperature
≤50
The main material of tanker
Q345R
CLW is a name brand of China,we are professional manufacturer of various garbage trucks for organic or norganic garbage,converying powder,sand,stone and any other kinds of architecture materials.Our produce can also transport ore,coal in mine to obey our customers requirement.
All kinds of our produces passed ISO9001-2000 international quality system and 3C authentication
For more detailed information, please contact:
0086-13872880538
0086-722-3801805
FAX:0086-722-3801980
& you can leave me a message with your valid E-mail address,
so that i can reply you
Nano lubricant additives for heavy equipment
1 Power saving 5%-30%
2 Antiwear & friction
3 Improving efficiency
4.Extend service life
The instruction of Dunba Power Saving & Maintaining additives
for heavy equipment
1.Discription
Dunba Power Saving & Maintaining addtives for oil for heavy equipment is a power saving and environmental friendly products as compound of Nano Metal Particle,polymer,and multifunctional additives,which is made of the newest technological fruit prduced by"national 863 plan".We have the intellectual property rights(Patent No. ZL200810032849.1).It has not only function of
super lubricating,selfrepairing but also of good antioxidation,and good antifriction.
2.Characteristic
1)
Save power 5%-30%,lubricant 50%;
2)Improving the resisting pressure and load capacity of lubricating oil, reducing impact load, and assure the minimum friction;
3)repair attrition dynamically,maitain equipment,reduce repair cost of the equipment effectively;
4)antiwear,reduce friction,reduce shake,cooling,reduce noise,improve efficiency,prolong the service lfe of equipment;
5)Mixed in virous lubricants,not changing the performance of lubricating oil,extend the period of changing oil;
6)Clean oil dirt,prevent malfunction,reduce mechanical accident;
7)The usage is simple and convenient,no damage for the construction of equipment.
3,Technical Characteristic
1)This product is produced by organic and inorganic nano materials, not only possessing the function of strong lubricating & resisting extreme pressure of organic material, but also having intelligent self-repair performance of inorganic nano material. In the process of friction, the nano particle is induced by the friction heat, rapidly penetrating into the micro defect on the surface of metal friction, quickly repairing uneven friction surface, and forming extra smooth,high hardness friction surface, not only reducing the friction coefficient, but also improving the performance of extreme pressure and anti-wear, thereby achieving the effect of power saving ,noise reduction and extending service life.
2)Stable performance,anti-oxidation,excellent dispersivity, mixed with any lubricating oil, no damage for the human body, environmental product.
3)Maintaining the equipment under extreme pressure, make the minimum friction.
Metal Friction surface comparison after and before using Dunba
(after) (before)
4.Application
This product is stable in various lubricants,is suitable for power-saving and maintainance of midium and small equipment in the fields of spinning,papermaking,chemical industry.
5,Usage Instruction
Add mixed product to lubrication system, normal usage is about 1%-3% of the total lubricating oil. If you have any problem, please consult the manufacturer.
6,Notice
1)Keep in normal temperature and avoid sunlight
2)Protect from impurity and water
3)Don’t drink and avoid skin contact for long time
2 Antiwear & friction
3 Improving efficiency
4.Extend service life
The instruction of Dunba Power Saving & Maintaining additives
for heavy equipment
1.Discription
Dunba Power Saving & Maintaining addtives for oil for heavy equipment is a power saving and environmental friendly products as compound of Nano Metal Particle,polymer,and multifunctional additives,which is made of the newest technological fruit prduced by"national 863 plan".We have the intellectual property rights(Patent No. ZL200810032849.1).It has not only function of
super lubricating,selfrepairing but also of good antioxidation,and good antifriction.
2.Characteristic
1)
Save power 5%-30%,lubricant 50%;
2)Improving the resisting pressure and load capacity of lubricating oil, reducing impact load, and assure the minimum friction;
3)repair attrition dynamically,maitain equipment,reduce repair cost of the equipment effectively;
4)antiwear,reduce friction,reduce shake,cooling,reduce noise,improve efficiency,prolong the service lfe of equipment;
5)Mixed in virous lubricants,not changing the performance of lubricating oil,extend the period of changing oil;
6)Clean oil dirt,prevent malfunction,reduce mechanical accident;
7)The usage is simple and convenient,no damage for the construction of equipment.
3,Technical Characteristic
1)This product is produced by organic and inorganic nano materials, not only possessing the function of strong lubricating & resisting extreme pressure of organic material, but also having intelligent self-repair performance of inorganic nano material. In the process of friction, the nano particle is induced by the friction heat, rapidly penetrating into the micro defect on the surface of metal friction, quickly repairing uneven friction surface, and forming extra smooth,high hardness friction surface, not only reducing the friction coefficient, but also improving the performance of extreme pressure and anti-wear, thereby achieving the effect of power saving ,noise reduction and extending service life.
2)Stable performance,anti-oxidation,excellent dispersivity, mixed with any lubricating oil, no damage for the human body, environmental product.
3)Maintaining the equipment under extreme pressure, make the minimum friction.
Metal Friction surface comparison after and before using Dunba
(after) (before)
4.Application
This product is stable in various lubricants,is suitable for power-saving and maintainance of midium and small equipment in the fields of spinning,papermaking,chemical industry.
5,Usage Instruction
Add mixed product to lubrication system, normal usage is about 1%-3% of the total lubricating oil. If you have any problem, please consult the manufacturer.
6,Notice
1)Keep in normal temperature and avoid sunlight
2)Protect from impurity and water
3)Don’t drink and avoid skin contact for long time
Friday, June 10, 2011
Nano lubricant additives for heavy equipment
1 Power saving 5%-30%
2 Antiwear & friction
3 Improving efficiency
4.Extend service life
The instruction of Dunba Power Saving & Maintaining additives
for heavy equipment
1.Discription
Dunba Power Saving & Maintaining addtives for oil for heavy equipment is a power saving and environmental friendly products as compound of Nano Metal Particle,polymer,and multifunctional additives,which is made of the newest technological fruit prduced by"national 863 plan".We have the intellectual property rights(Patent No. ZL200810032849.1).It has not only function of
super lubricating,selfrepairing but also of good antioxidation,and good antifriction.
2.Characteristic
1)
Save power 5%-30%,lubricant 50%;
2)Improving the resisting pressure and load capacity of lubricating oil, reducing impact load, and assure the minimum friction;
3)repair attrition dynamically,maitain equipment,reduce repair cost of the equipment effectively;
4)antiwear,reduce friction,reduce shake,cooling,reduce noise,improve efficiency,prolong the service lfe of equipment;
5)Mixed in virous lubricants,not changing the performance of lubricating oil,extend the period of changing oil;
6)Clean oil dirt,prevent malfunction,reduce mechanical accident;
7)The usage is simple and convenient,no damage for the construction of equipment.
3,Technical Characteristic
1)This product is produced by organic and inorganic nano materials, not only possessing the function of strong lubricating & resisting extreme pressure of organic material, but also having intelligent self-repair performance of inorganic nano material. In the process of friction, the nano particle is induced by the friction heat, rapidly penetrating into the micro defect on the surface of metal friction, quickly repairing uneven friction surface, and forming extra smooth,high hardness friction surface, not only reducing the friction coefficient, but also improving the performance of extreme pressure and anti-wear, thereby achieving the effect of power saving ,noise reduction and extending service life.
2)Stable performance,anti-oxidation,excellent dispersivity, mixed with any lubricating oil, no damage for the human body, environmental product.
3)Maintaining the equipment under extreme pressure, make the minimum friction.
Metal Friction surface comparison after and before using Dunba
(after) (before)
4.Application
This product is stable in various lubricants,is suitable for power-saving and maintainance of midium and small equipment in the fields of spinning,papermaking,chemical industry.
5,Usage Instruction
Add mixed product to lubrication system, normal usage is about 1%-3% of the total lubricating oil. If you have any problem, please consult the manufacturer.
6,Notice
1)Keep in normal temperature and avoid sunlight
2)Protect from impurity and water
3)Don’t drink and avoid skin contact for long time
2 Antiwear & friction
3 Improving efficiency
4.Extend service life
The instruction of Dunba Power Saving & Maintaining additives
for heavy equipment
1.Discription
Dunba Power Saving & Maintaining addtives for oil for heavy equipment is a power saving and environmental friendly products as compound of Nano Metal Particle,polymer,and multifunctional additives,which is made of the newest technological fruit prduced by"national 863 plan".We have the intellectual property rights(Patent No. ZL200810032849.1).It has not only function of
super lubricating,selfrepairing but also of good antioxidation,and good antifriction.
2.Characteristic
1)
Save power 5%-30%,lubricant 50%;
2)Improving the resisting pressure and load capacity of lubricating oil, reducing impact load, and assure the minimum friction;
3)repair attrition dynamically,maitain equipment,reduce repair cost of the equipment effectively;
4)antiwear,reduce friction,reduce shake,cooling,reduce noise,improve efficiency,prolong the service lfe of equipment;
5)Mixed in virous lubricants,not changing the performance of lubricating oil,extend the period of changing oil;
6)Clean oil dirt,prevent malfunction,reduce mechanical accident;
7)The usage is simple and convenient,no damage for the construction of equipment.
3,Technical Characteristic
1)This product is produced by organic and inorganic nano materials, not only possessing the function of strong lubricating & resisting extreme pressure of organic material, but also having intelligent self-repair performance of inorganic nano material. In the process of friction, the nano particle is induced by the friction heat, rapidly penetrating into the micro defect on the surface of metal friction, quickly repairing uneven friction surface, and forming extra smooth,high hardness friction surface, not only reducing the friction coefficient, but also improving the performance of extreme pressure and anti-wear, thereby achieving the effect of power saving ,noise reduction and extending service life.
2)Stable performance,anti-oxidation,excellent dispersivity, mixed with any lubricating oil, no damage for the human body, environmental product.
3)Maintaining the equipment under extreme pressure, make the minimum friction.
Metal Friction surface comparison after and before using Dunba
(after) (before)
4.Application
This product is stable in various lubricants,is suitable for power-saving and maintainance of midium and small equipment in the fields of spinning,papermaking,chemical industry.
5,Usage Instruction
Add mixed product to lubrication system, normal usage is about 1%-3% of the total lubricating oil. If you have any problem, please consult the manufacturer.
6,Notice
1)Keep in normal temperature and avoid sunlight
2)Protect from impurity and water
3)Don’t drink and avoid skin contact for long time
Nano lubricant additives for heavy equipment
1 Power saving 5%-30%
2 Antiwear & friction
3 Improving efficiency
4.Extend service life
The instruction of Dunba Power Saving & Maintaining additives
for heavy equipment
1.Discription
Dunba Power Saving & Maintaining addtives for oil for heavy equipment is a power saving and environmental friendly products as compound of Nano Metal Particle,polymer,and multifunctional additives,which is made of the newest technological fruit prduced by"national 863 plan".We have the intellectual property rights(Patent No. ZL200810032849.1).It has not only function of
super lubricating,selfrepairing but also of good antioxidation,and good antifriction.
2.Characteristic
1)
Save power 5%-30%,lubricant 50%;
2)Improving the resisting pressure and load capacity of lubricating oil, reducing impact load, and assure the minimum friction;
3)repair attrition dynamically,maitain equipment,reduce repair cost of the equipment effectively;
4)antiwear,reduce friction,reduce shake,cooling,reduce noise,improve efficiency,prolong the service lfe of equipment;
5)Mixed in virous lubricants,not changing the performance of lubricating oil,extend the period of changing oil;
6)Clean oil dirt,prevent malfunction,reduce mechanical accident;
7)The usage is simple and convenient,no damage for the construction of equipment.
3,Technical Characteristic
1)This product is produced by organic and inorganic nano materials, not only possessing the function of strong lubricating & resisting extreme pressure of organic material, but also having intelligent self-repair performance of inorganic nano material. In the process of friction, the nano particle is induced by the friction heat, rapidly penetrating into the micro defect on the surface of metal friction, quickly repairing uneven friction surface, and forming extra smooth,high hardness friction surface, not only reducing the friction coefficient, but also improving the performance of extreme pressure and anti-wear, thereby achieving the effect of power saving ,noise reduction and extending service life.
2)Stable performance,anti-oxidation,excellent dispersivity, mixed with any lubricating oil, no damage for the human body, environmental product.
3)Maintaining the equipment under extreme pressure, make the minimum friction.
Metal Friction surface comparison after and before using Dunba
(after) (before)
4.Application
This product is stable in various lubricants,is suitable for power-saving and maintainance of midium and small equipment in the fields of spinning,papermaking,chemical industry.
5,Usage Instruction
Add mixed product to lubrication system, normal usage is about 1%-3% of the total lubricating oil. If you have any problem, please consult the manufacturer.
6,Notice
1)Keep in normal temperature and avoid sunlight
2)Protect from impurity and water
3)Don’t drink and avoid skin contact for long time
2 Antiwear & friction
3 Improving efficiency
4.Extend service life
The instruction of Dunba Power Saving & Maintaining additives
for heavy equipment
1.Discription
Dunba Power Saving & Maintaining addtives for oil for heavy equipment is a power saving and environmental friendly products as compound of Nano Metal Particle,polymer,and multifunctional additives,which is made of the newest technological fruit prduced by"national 863 plan".We have the intellectual property rights(Patent No. ZL200810032849.1).It has not only function of
super lubricating,selfrepairing but also of good antioxidation,and good antifriction.
2.Characteristic
1)
Save power 5%-30%,lubricant 50%;
2)Improving the resisting pressure and load capacity of lubricating oil, reducing impact load, and assure the minimum friction;
3)repair attrition dynamically,maitain equipment,reduce repair cost of the equipment effectively;
4)antiwear,reduce friction,reduce shake,cooling,reduce noise,improve efficiency,prolong the service lfe of equipment;
5)Mixed in virous lubricants,not changing the performance of lubricating oil,extend the period of changing oil;
6)Clean oil dirt,prevent malfunction,reduce mechanical accident;
7)The usage is simple and convenient,no damage for the construction of equipment.
3,Technical Characteristic
1)This product is produced by organic and inorganic nano materials, not only possessing the function of strong lubricating & resisting extreme pressure of organic material, but also having intelligent self-repair performance of inorganic nano material. In the process of friction, the nano particle is induced by the friction heat, rapidly penetrating into the micro defect on the surface of metal friction, quickly repairing uneven friction surface, and forming extra smooth,high hardness friction surface, not only reducing the friction coefficient, but also improving the performance of extreme pressure and anti-wear, thereby achieving the effect of power saving ,noise reduction and extending service life.
2)Stable performance,anti-oxidation,excellent dispersivity, mixed with any lubricating oil, no damage for the human body, environmental product.
3)Maintaining the equipment under extreme pressure, make the minimum friction.
Metal Friction surface comparison after and before using Dunba
(after) (before)
4.Application
This product is stable in various lubricants,is suitable for power-saving and maintainance of midium and small equipment in the fields of spinning,papermaking,chemical industry.
5,Usage Instruction
Add mixed product to lubrication system, normal usage is about 1%-3% of the total lubricating oil. If you have any problem, please consult the manufacturer.
6,Notice
1)Keep in normal temperature and avoid sunlight
2)Protect from impurity and water
3)Don’t drink and avoid skin contact for long time
Nano lubricant additives for heavy equipment
1 Power saving 5%-30%
2 Antiwear & friction
3 Improving efficiency
4.Extend service life
The instruction of Dunba Power Saving & Maintaining additives
for heavy equipment
1.Discription
Dunba Power Saving & Maintaining addtives for oil for heavy equipment is a power saving and environmental friendly products as compound of Nano Metal Particle,polymer,and multifunctional additives,which is made of the newest technological fruit prduced by"national 863 plan".We have the intellectual property rights(Patent No. ZL200810032849.1).It has not only function of
super lubricating,selfrepairing but also of good antioxidation,and good antifriction.
2.Characteristic
1)
Save power 5%-30%,lubricant 50%;
2)Improving the resisting pressure and load capacity of lubricating oil, reducing impact load, and assure the minimum friction;
3)repair attrition dynamically,maitain equipment,reduce repair cost of the equipment effectively;
4)antiwear,reduce friction,reduce shake,cooling,reduce noise,improve efficiency,prolong the service lfe of equipment;
5)Mixed in virous lubricants,not changing the performance of lubricating oil,extend the period of changing oil;
6)Clean oil dirt,prevent malfunction,reduce mechanical accident;
7)The usage is simple and convenient,no damage for the construction of equipment.
3,Technical Characteristic
1)This product is produced by organic and inorganic nano materials, not only possessing the function of strong lubricating & resisting extreme pressure of organic material, but also having intelligent self-repair performance of inorganic nano material. In the process of friction, the nano particle is induced by the friction heat, rapidly penetrating into the micro defect on the surface of metal friction, quickly repairing uneven friction surface, and forming extra smooth,high hardness friction surface, not only reducing the friction coefficient, but also improving the performance of extreme pressure and anti-wear, thereby achieving the effect of power saving ,noise reduction and extending service life.
2)Stable performance,anti-oxidation,excellent dispersivity, mixed with any lubricating oil, no damage for the human body, environmental product.
3)Maintaining the equipment under extreme pressure, make the minimum friction.
Metal Friction surface comparison after and before using Dunba
(after) (before)
4.Application
This product is stable in various lubricants,is suitable for power-saving and maintainance of midium and small equipment in the fields of spinning,papermaking,chemical industry.
5,Usage Instruction
Add mixed product to lubrication system, normal usage is about 1%-3% of the total lubricating oil. If you have any problem, please consult the manufacturer.
6,Notice
1)Keep in normal temperature and avoid sunlight
2)Protect from impurity and water
3)Don’t drink and avoid skin contact for long time
2 Antiwear & friction
3 Improving efficiency
4.Extend service life
The instruction of Dunba Power Saving & Maintaining additives
for heavy equipment
1.Discription
Dunba Power Saving & Maintaining addtives for oil for heavy equipment is a power saving and environmental friendly products as compound of Nano Metal Particle,polymer,and multifunctional additives,which is made of the newest technological fruit prduced by"national 863 plan".We have the intellectual property rights(Patent No. ZL200810032849.1).It has not only function of
super lubricating,selfrepairing but also of good antioxidation,and good antifriction.
2.Characteristic
1)
Save power 5%-30%,lubricant 50%;
2)Improving the resisting pressure and load capacity of lubricating oil, reducing impact load, and assure the minimum friction;
3)repair attrition dynamically,maitain equipment,reduce repair cost of the equipment effectively;
4)antiwear,reduce friction,reduce shake,cooling,reduce noise,improve efficiency,prolong the service lfe of equipment;
5)Mixed in virous lubricants,not changing the performance of lubricating oil,extend the period of changing oil;
6)Clean oil dirt,prevent malfunction,reduce mechanical accident;
7)The usage is simple and convenient,no damage for the construction of equipment.
3,Technical Characteristic
1)This product is produced by organic and inorganic nano materials, not only possessing the function of strong lubricating & resisting extreme pressure of organic material, but also having intelligent self-repair performance of inorganic nano material. In the process of friction, the nano particle is induced by the friction heat, rapidly penetrating into the micro defect on the surface of metal friction, quickly repairing uneven friction surface, and forming extra smooth,high hardness friction surface, not only reducing the friction coefficient, but also improving the performance of extreme pressure and anti-wear, thereby achieving the effect of power saving ,noise reduction and extending service life.
2)Stable performance,anti-oxidation,excellent dispersivity, mixed with any lubricating oil, no damage for the human body, environmental product.
3)Maintaining the equipment under extreme pressure, make the minimum friction.
Metal Friction surface comparison after and before using Dunba
(after) (before)
4.Application
This product is stable in various lubricants,is suitable for power-saving and maintainance of midium and small equipment in the fields of spinning,papermaking,chemical industry.
5,Usage Instruction
Add mixed product to lubrication system, normal usage is about 1%-3% of the total lubricating oil. If you have any problem, please consult the manufacturer.
6,Notice
1)Keep in normal temperature and avoid sunlight
2)Protect from impurity and water
3)Don’t drink and avoid skin contact for long time
Subscribe to:
Posts (Atom)