This product has good lubricity, extreme pressure anti-wear, rust resistance and high temperature oxidation security.
MM15A
upsetting the oil temperature
This product has good lubricity, extreme pressure anti-wear, rust resistance and high temperature oxidation security. Can effectively protect the mold, to meet the standard parts and non-standard parts forming a multi-station, the processing temperature up to 800 °C, can be fully qualified warm forging of stainless steel workpiece. High temperature resistance with sintering additives, is ideal for warm forging of stainless steel nuts, nuts.
Uses:
Mainly used for warm forging stainless steel nuts, nut; also be used for other parts of the warm forging of stainless steel processing.
Technical parameters:
Test Project
Technical parameters
Test Method
Appearance
Dark brown oil
Head Measurement
Kinematic viscosity (40 °C) mm2 / s
180/250
GB/T265
Mechanical impurities
No
GB/T511 - 88
Pb-free card to bite the largest load value (N)
≥ 920
GB/T3142
Pd sintering load value (N)
≥ 6800
GB/T3142
Performance characteristics:
Good lubricity, extreme pressure anti-wear
On the 4A, 4P and so easy to wear red bar has very good protection
Effective protection of punch (red needles) and die, to extend life, reduce overall costs.
High-temperature performance, difficult to produce sludge.
Low odor, low smoke, protect the operating environment.
MM15A stainless steel molding can replace expensive oil imports of the same type of high-quality products to meet the harsh temperature and the forging of stainless steel forming stainless steel variant with large amounts of forming. MM15A sub-medium viscosity (180) and high viscosity (250) are two viscosity grades.
Pb values: display oil lubrication, Pd values are displayed under high temperature and pressure oil extreme pressure performance, the value of common lubricants Pb 280, Pd value is 1200.
Pb, Pd showed higher value the better the performance of oil lubricated.
Saturday, July 2, 2011
MM15A-1 upsetting the oil temperature
Low odor, low smoke, protect the operating environment.
This product has good lubricity, extreme pressure anti-wear, rust resistance and high temperature oxidation security. Can effectively protect the mold, to meet the standard parts and non-standard parts forming a multi-station, the processing temperature up to 800 °C, can be fully qualified warm forging of stainless steel workpiece. High temperature resistance with sintering additives, is ideal for warm forging of stainless steel nuts, nuts.
Uses:
Mainly used for warm forging stainless steel nuts, nut; also be used for other parts of the warm forging of stainless steel processing.
Technical parameters:
Test Project
Technical parameters
Test Method
Appearance
Dark brown oil
Head Measurement
Kinematic viscosity (40 °C) mm2 / s
180/250
GB/T265
Mechanical impurities
No
GB/T511 - 88
Pb-free card to bite the largest load value (N)
≥920 ≥ 920
GB/T3142
Pd sintering load value (N)
≥6800 ≥ 6800
GB/T3142
Performance characteristics:
Good lubricity, extreme pressure anti-wear
On the 4A, 4P and so easy to wear red bar has very good protection
Effective protection of punch (red needles) and die, to extend life, reduce overall costs.
High-temperature performance, difficult to produce sludge.
Low odor, low smoke, protect the operating environment.
MM15A stainless steel molding can replace expensive oil imports of the same type of high-quality products to meet the harsh temperature and the forging of stainless steel forming stainless steel variant with large amounts of forming. MM15A sub-medium viscosity (180) and high viscosity (250) are two viscosity grades.
Pb values: display oil lubrication, Pd values are displayed under high temperature and pressure oil extreme pressure performance, the value of common lubricants Pb 280, Pd value is 1200.
Pb, Pd showed higher value the better the performance of oil lubricated.
This product has good lubricity, extreme pressure anti-wear, rust resistance and high temperature oxidation security. Can effectively protect the mold, to meet the standard parts and non-standard parts forming a multi-station, the processing temperature up to 800 °C, can be fully qualified warm forging of stainless steel workpiece. High temperature resistance with sintering additives, is ideal for warm forging of stainless steel nuts, nuts.
Uses:
Mainly used for warm forging stainless steel nuts, nut; also be used for other parts of the warm forging of stainless steel processing.
Technical parameters:
Test Project
Technical parameters
Test Method
Appearance
Dark brown oil
Head Measurement
Kinematic viscosity (40 °C) mm2 / s
180/250
GB/T265
Mechanical impurities
No
GB/T511 - 88
Pb-free card to bite the largest load value (N)
≥920 ≥ 920
GB/T3142
Pd sintering load value (N)
≥6800 ≥ 6800
GB/T3142
Performance characteristics:
Good lubricity, extreme pressure anti-wear
On the 4A, 4P and so easy to wear red bar has very good protection
Effective protection of punch (red needles) and die, to extend life, reduce overall costs.
High-temperature performance, difficult to produce sludge.
Low odor, low smoke, protect the operating environment.
MM15A stainless steel molding can replace expensive oil imports of the same type of high-quality products to meet the harsh temperature and the forging of stainless steel forming stainless steel variant with large amounts of forming. MM15A sub-medium viscosity (180) and high viscosity (250) are two viscosity grades.
Pb values: display oil lubrication, Pd values are displayed under high temperature and pressure oil extreme pressure performance, the value of common lubricants Pb 280, Pd value is 1200.
Pb, Pd showed higher value the better the performance of oil lubricated.
62-64.#Fully Refined Paraffin Wax
62-64.#Fully Refined Paraffin Wax
Melting Point:56-58
Oil content:<0.50%
Penetration degree:(25Celsius degree)<16
62-64.#Fully Refined Paraffin Wax
Melting Point:62-64
Oil content:<0.50%
Penetration degree:(25Celsius degree)<16
Color:28-30
Brand:KunLun
Melting Point:56-58
Oil content:<0.50%
Penetration degree:(25Celsius degree)<16
62-64.#Fully Refined Paraffin Wax
Melting Point:62-64
Oil content:<0.50%
Penetration degree:(25Celsius degree)<16
Color:28-30
Brand:KunLun
MM20 stainless steel forming oil
This product has good lubricity, extreme pressure anti-wear, rust resistance and high temperature oxidation security.
MM20
stainless steel forming oil
This product has good lubricity, extreme pressure anti-wear, rust resistance and high temperature oxidation security. Can effectively protect the mold, to meet the standard parts and non-standard parts forming a multi-station, the processing temperature up to 800 °C, can be fully qualified warm forging of stainless steel workpiece. High temperature resistance with sintering additives, is ideal for warm forging of stainless steel nuts, nuts.
Uses:
Mainly used for warm forging stainless steel nuts, nut; also be used for other parts of the warm forging of stainless steel processing.
Technical parameters:
Test Project
Technical parameters
Test Method
Appearance
Dark brown oil
Head Measurement
Kinematic viscosity (40 °C) mm2 / s
180/250
GB/T265
Mechanical impurities
No
GB/T511 - 88
Pb-free card to bite the largest load value (N)
≥920 ≥ 920
GB/T3142 GB/T3142
Pd sintering load value (N)
≥6800 ≥ 6800
GB/T3142 GB/T3142
Performance characteristics:
Good lubricity, extreme pressure anti-wear
On the 4A, 4P and so easy to wear red bar has very good protection
Effective protection of punch (red needles) and die, to extend life, reduce overall costs.
High-temperature performance, difficult to produce sludge.
Low odor, low smoke, protect the operating environment.
MM20 stainless steel molding can replace expensive oil imports of the same type of high-quality products to meet the harsh temperature and the forging of stainless steel forming stainless steel variant with large amounts of forming. MM20 sub-medium viscosity (180) and high viscosity (250) are two viscosity grades.
Pb values: display oil lubrication, Pd values are displayed under high temperature and pressure oil extreme pressure performance, the value of common lubricants Pb 280, Pd value is 1200.
Pb, Pd showed higher value the better the performance of oil lubricated.
MM20
stainless steel forming oil
This product has good lubricity, extreme pressure anti-wear, rust resistance and high temperature oxidation security. Can effectively protect the mold, to meet the standard parts and non-standard parts forming a multi-station, the processing temperature up to 800 °C, can be fully qualified warm forging of stainless steel workpiece. High temperature resistance with sintering additives, is ideal for warm forging of stainless steel nuts, nuts.
Uses:
Mainly used for warm forging stainless steel nuts, nut; also be used for other parts of the warm forging of stainless steel processing.
Technical parameters:
Test Project
Technical parameters
Test Method
Appearance
Dark brown oil
Head Measurement
Kinematic viscosity (40 °C) mm2 / s
180/250
GB/T265
Mechanical impurities
No
GB/T511 - 88
Pb-free card to bite the largest load value (N)
≥920 ≥ 920
GB/T3142 GB/T3142
Pd sintering load value (N)
≥6800 ≥ 6800
GB/T3142 GB/T3142
Performance characteristics:
Good lubricity, extreme pressure anti-wear
On the 4A, 4P and so easy to wear red bar has very good protection
Effective protection of punch (red needles) and die, to extend life, reduce overall costs.
High-temperature performance, difficult to produce sludge.
Low odor, low smoke, protect the operating environment.
MM20 stainless steel molding can replace expensive oil imports of the same type of high-quality products to meet the harsh temperature and the forging of stainless steel forming stainless steel variant with large amounts of forming. MM20 sub-medium viscosity (180) and high viscosity (250) are two viscosity grades.
Pb values: display oil lubrication, Pd values are displayed under high temperature and pressure oil extreme pressure performance, the value of common lubricants Pb 280, Pd value is 1200.
Pb, Pd showed higher value the better the performance of oil lubricated.
MOLD RELEASER AGENT FUKKOL(SILICONE OIL)
MOULD RELEASE AGENT FUKKOL
NON-STAINING RELEASE OF PLASTICS AND RUBBER FOR MOST TYPES OF PLASTIC INJECTION MOULDING
FUKKOL MOULD RELEASE AGENT
(NON-PAINTABLE)
Description:
FUKKOL MOULD RELEASE AGENT(NON- PAINTABLE)
is an aerosol applied release agent comtaining a highly effective silicone oil, specially formulated to provide a quick, effective,
non-staining
release of plastics and rubber for most types of plastic injection moulding.
Its specially designed nozzle provides a very fine spray pattern which allows the quantity applied to be fully controlled and the most complicated dies to be completely covered.
Benefits:
-
Ultra fine spray
gives controlled application with complete coverage
-Improved finish and reduced risk of over application
-Reduces problems associated with marking and transfering, highly economical, efficient release, only one pass required for many shots of ejection
-Effective and long lasting film provides more numbers of release than most silicone formulations
-Low environmental impact, contains no CFC propellant
Non staining property makes it an excellent lubricant for textile and paper industry.
Precautions:
Pressurised container, protect from sunlight, store at temperature below 50°C
Do not puncture or incinerate
Do not spray on to naked flame
Flammable.
Typical Data
Active Ingredient
Silicone Oil
Solvent
Hexyl Hydride
Propellant
LPG
NON-STAINING RELEASE OF PLASTICS AND RUBBER FOR MOST TYPES OF PLASTIC INJECTION MOULDING
FUKKOL MOULD RELEASE AGENT
(NON-PAINTABLE)
Description:
FUKKOL MOULD RELEASE AGENT(NON- PAINTABLE)
is an aerosol applied release agent comtaining a highly effective silicone oil, specially formulated to provide a quick, effective,
non-staining
release of plastics and rubber for most types of plastic injection moulding.
Its specially designed nozzle provides a very fine spray pattern which allows the quantity applied to be fully controlled and the most complicated dies to be completely covered.
Benefits:
-
Ultra fine spray
gives controlled application with complete coverage
-Improved finish and reduced risk of over application
-Reduces problems associated with marking and transfering, highly economical, efficient release, only one pass required for many shots of ejection
-Effective and long lasting film provides more numbers of release than most silicone formulations
-Low environmental impact, contains no CFC propellant
Non staining property makes it an excellent lubricant for textile and paper industry.
Precautions:
Pressurised container, protect from sunlight, store at temperature below 50°C
Do not puncture or incinerate
Do not spray on to naked flame
Flammable.
Typical Data
Active Ingredient
Silicone Oil
Solvent
Hexyl Hydride
Propellant
LPG
MOLD RELEASER SPRAY FUKKOL
MOULD RELEASE SPRAY FUKKOL
NON-STAINING RELEASE OF PLASTICS AND RUBBER FOR MOST TYPES OF PLASTIC INJECTION MOLD
FUKKOL MOULD RELEASE AGENT
(NON-PAINTABLE)
http://www.fukkol-lube.com/asp-bin/EN/?page=1
Description:
FUKKOL MOULD RELEASE AGENT(NON- PAINTABLE)
is an aerosol applied release agent comtaining a highly effective silicone oil, specially formulated to provide a quick, effective,
non-staining
release of plastics and rubber for most types of plastic injection moulding.
Its specially designed nozzle provides a very fine spray pattern which allows the quantity applied to be fully controlled and the most complicated dies to be completely covered.
Benefits:
-
Ultra fine spray
gives controlled application with complete coverage
-Improved finish and reduced risk of over application
-Reduces problems associated with marking and transfering, highly economical, efficient release, only one pass required for many shots of ejection
-Effective and long lasting film provides more numbers of release than most silicone formulations
-Low environmental impact, contains no CFC propellant
Non staining property makes it an excellent lubricant for textile and paper industry.
Precautions:
Pressurised container, protect from sunlight, store at temperature below 50°C
Do not puncture or incinerate
Do not spray on to naked flame
Flammable.
Typical Data
Active Ingredient
Silicone Oil
Solvent
Hexyl Hydride
Propellant
LPG
NON-STAINING RELEASE OF PLASTICS AND RUBBER FOR MOST TYPES OF PLASTIC INJECTION MOLD
FUKKOL MOULD RELEASE AGENT
(NON-PAINTABLE)
http://www.fukkol-lube.com/asp-bin/EN/?page=1
Description:
FUKKOL MOULD RELEASE AGENT(NON- PAINTABLE)
is an aerosol applied release agent comtaining a highly effective silicone oil, specially formulated to provide a quick, effective,
non-staining
release of plastics and rubber for most types of plastic injection moulding.
Its specially designed nozzle provides a very fine spray pattern which allows the quantity applied to be fully controlled and the most complicated dies to be completely covered.
Benefits:
-
Ultra fine spray
gives controlled application with complete coverage
-Improved finish and reduced risk of over application
-Reduces problems associated with marking and transfering, highly economical, efficient release, only one pass required for many shots of ejection
-Effective and long lasting film provides more numbers of release than most silicone formulations
-Low environmental impact, contains no CFC propellant
Non staining property makes it an excellent lubricant for textile and paper industry.
Precautions:
Pressurised container, protect from sunlight, store at temperature below 50°C
Do not puncture or incinerate
Do not spray on to naked flame
Flammable.
Typical Data
Active Ingredient
Silicone Oil
Solvent
Hexyl Hydride
Propellant
LPG
MOLYFU Lubrican Spray
MOLYFU Lubrican Spray
Anti - Seize and Anti - Wear
MOLYFU Lubrican Spray
Description:
FUKKOL Molyfu Spray is a dry film lubricant fortified with
Molybdenum Disulfide that reduces friction and improves
overall operating perfor-mance. Molyfu Spray bonds
instantly to metal, rubber, plastic and most substrates to
form a dirt repelling barrier that lubricates and protects the
surface from pressure and friction. Withstands temperatures
up to 400°C and extreme pres- sures, as well as water
and chemical attack.
Application
Recommended as a general maintenance lubricant
on gaskets, transfer belts and conveyor belts; as an assembly lube on motors, plant machinery and handling equipment;as
a release agent for rubber moldings; and as a general lubricant for high temper-ature, low load, or high rpm slides, rollers,
wheels,gears, chains and hoists.
Features
-Anti - Seize and Anti - Wear
-Dirt repelling barrier
-Can mix in other bricants
Typical physical properties
Appearance
dark grey liquid
Flash point
<0
Boiling point
<- 395 °F
dissolubility
Neg. In H 2 O
Anti - Seize and Anti - Wear
MOLYFU Lubrican Spray
Description:
FUKKOL Molyfu Spray is a dry film lubricant fortified with
Molybdenum Disulfide that reduces friction and improves
overall operating perfor-mance. Molyfu Spray bonds
instantly to metal, rubber, plastic and most substrates to
form a dirt repelling barrier that lubricates and protects the
surface from pressure and friction. Withstands temperatures
up to 400°C and extreme pres- sures, as well as water
and chemical attack.
Application
Recommended as a general maintenance lubricant
on gaskets, transfer belts and conveyor belts; as an assembly lube on motors, plant machinery and handling equipment;as
a release agent for rubber moldings; and as a general lubricant for high temper-ature, low load, or high rpm slides, rollers,
wheels,gears, chains and hoists.
Features
-Anti - Seize and Anti - Wear
-Dirt repelling barrier
-Can mix in other bricants
Typical physical properties
Appearance
dark grey liquid
Flash point
<0
Boiling point
<- 395 °F
dissolubility
Neg. In H 2 O
MOLYFU SPRAY
MOLYFU SPRAY
Anti - Seize and Anti - Wear
MOLYFU SPRAY
Description:
FUKKOL Molyfu Spray is a dry film lubricant fortified with
Molybdenum Disulfide that reduces friction and improves
overall operating perfor-mance. Molyfu Spray bonds
instantly to metal, rubber, plastic and most substrates to
form a dirt repelling barrier that lubricates and protects the
surface from pressure and friction. Withstands temperatures
up to 400°C and extreme pres- sures, as well as water
and chemical attack.
Application
Recommended as a general maintenance lubricant
on gaskets, transfer belts and conveyor belts; as an assembly lube on motors, plant machinery and handling equipment;as
a release agent for rubber moldings; and as a general lubricant for high temper-ature, low load, or high rpm slides, rollers,
wheels,gears, chains and hoists.
Features
-Anti - Seize and Anti - Wear
-Dirt repelling barrier
-Can mix in other bricants
Typical physical properties
Appearance
dark grey liquid
Flash point
<0
Boiling point
<- 395 °F
dissolubility
Neg. In H 2 O
Anti - Seize and Anti - Wear
MOLYFU SPRAY
Description:
FUKKOL Molyfu Spray is a dry film lubricant fortified with
Molybdenum Disulfide that reduces friction and improves
overall operating perfor-mance. Molyfu Spray bonds
instantly to metal, rubber, plastic and most substrates to
form a dirt repelling barrier that lubricates and protects the
surface from pressure and friction. Withstands temperatures
up to 400°C and extreme pres- sures, as well as water
and chemical attack.
Application
Recommended as a general maintenance lubricant
on gaskets, transfer belts and conveyor belts; as an assembly lube on motors, plant machinery and handling equipment;as
a release agent for rubber moldings; and as a general lubricant for high temper-ature, low load, or high rpm slides, rollers,
wheels,gears, chains and hoists.
Features
-Anti - Seize and Anti - Wear
-Dirt repelling barrier
-Can mix in other bricants
Typical physical properties
Appearance
dark grey liquid
Flash point
<0
Boiling point
<- 395 °F
dissolubility
Neg. In H 2 O
MOS2 HT grease
1,a high performance and high temperatureEP grease
2,Operation temperature: -20~150
3,Lubrication of high loaded bearings
Distributor Wanted
Description
ArChine Arcplex LMO 150 is a high performance and high temperature, EP grease on non-ageing mineral oil base formulated with molybdenum disulphides.
ArChine Arcplex LMO 150 has many advantages,for example
high drop point, non-ageing, high stability, water resistant, corrosion resistant, high pressure load capacity, good adhesiveness, and so on.
Application
ArChine Arcplex LMO 150 is suitable for lubrication of roller and friction bearings under extreme pressure load. Molybdenum disulphides reduce friction and wear under temperature and pressure load.
ArChine Arcplex LMO 150 also helps to smoothen new high loaded bearings.
Lubrication of high loaded bearings (e.g. pivoting bearings, pins, shafts, joints on trucks) threaded spindles and guides of lifting units.
Operation temperature: -20°C~150°C
Technical Data
ArChine Arcplex LMO 150
Unit
Test method
Appearance
Gray-black
smooth
Visual
Worked penetration,0.1mm
240-295
GB/T 269
Drop point,°C ≥
260
GB/T 4929
Corrosiveness to Copper
(T2 Copper,100°C,24h)
No change
GB/T 7326
Second method
Evaporation (99°C,22h) % ≤
2.0
GB/T 7325
2,Operation temperature: -20~150
3,Lubrication of high loaded bearings
Distributor Wanted
Description
ArChine Arcplex LMO 150 is a high performance and high temperature, EP grease on non-ageing mineral oil base formulated with molybdenum disulphides.
ArChine Arcplex LMO 150 has many advantages,for example
high drop point, non-ageing, high stability, water resistant, corrosion resistant, high pressure load capacity, good adhesiveness, and so on.
Application
ArChine Arcplex LMO 150 is suitable for lubrication of roller and friction bearings under extreme pressure load. Molybdenum disulphides reduce friction and wear under temperature and pressure load.
ArChine Arcplex LMO 150 also helps to smoothen new high loaded bearings.
Lubrication of high loaded bearings (e.g. pivoting bearings, pins, shafts, joints on trucks) threaded spindles and guides of lifting units.
Operation temperature: -20°C~150°C
Technical Data
ArChine Arcplex LMO 150
Unit
Test method
Appearance
Gray-black
smooth
Visual
Worked penetration,0.1mm
240-295
GB/T 269
Drop point,°C ≥
260
GB/T 4929
Corrosiveness to Copper
(T2 Copper,100°C,24h)
No change
GB/T 7326
Second method
Evaporation (99°C,22h) % ≤
2.0
GB/T 7325
MOS2 Molybdenum disulfide(Solid lubricant)
1,Summary: Lead gray powder,Dissolved in aqua regia,good chemical stability
2,Package:50kg/drum
3,D50um :0.8-5um
4,MOQ:10kg
Molybdenum disulfide is the main function of friction materials for low temperature anti-friction, high temperature by friction, loss on ignition of small, volatile materials in friction; friction.
Molybdenum disulfide is made of natural molybdenum concentrate powder after purification by chemical changes in molecular structure made of solid powder. This product is black Shaodai silver gray color, with metallic luster, a creamy touch of the flu, soluble in water. Products are well dispersed without the advantages of bonding, can be added in a variety of oils and fats, the formation of not Colloidal state bonding, to increase the oil's lubricating and extreme pressure. Also applies to high temperature, high pressure, high-speed high-load mechanical working condition, extend equipment life.
Summary
:High Pure Molybdenum Disulfide is in lead gray powder,dissolved in aqua regia,hot nitric acid and concentrated nitric acid,insoluble in water, dilute sulfuric acid and organic solvents. its chemical stability is good.
Application
: producing Molybdenum compounds,solid lubricants and the additive of various kinds of lubricants.
Package
:Iron drum. 50kg/drum. Inner packing is in two plastic bags,earch one is 25kg/bag.
Production
Molybdenite ore is processed by flotation to give relatively pure MoS
2
, the main contaminant being carbon. MoS
2
also arises by the thermal treatment of virtually all molybdenum compounds with hydrogen sulfide. Molybdenite is the principal ore from which molybdenum metal is extracted.
[edit] Structure and physical properties.
In MoS
2
, each Mo(IV) center is trigonal prismatic, being bound to six sulfide ligands, each of which is pyramidal. The trigonal prisms are interconnected to give a layered structure, wherein molybdenum atoms are sandwiched between layers of sulfur atoms. Because of the weak van der Waals interactions between the sheets of sulfide atoms, MoS
2
has a low coefficient of friction, resulting in its lubricating properties. Other layered inorganic materials exhibit lubricating properties (collectively known as solid lubricants or dry lubricants) including graphite, which requires volatile additives, and hexagonal boron nitride.
MoS
2
is diamagnetic and a semiconductor.
Chemical properties
Molybdenum disulfide is stable in air or oxygen at normal conditions, but reacts with oxygen upon heating forming molybdenum trioxide:
2 MoS
2
+ 9 O
2
→ 2 MoO
3
+ 4 SO
3
Chlorine attacks molybdenum disulfide at elevated temperatures to form molybdenum pentachloride:
2 MoS
2
+ 7 Cl
2
→ 2 MoCl
5
+ 2 S
2
Cl
2
Molybdenum disulfide reacts with alkyl lithium under controlled conditions to form intercalation compounds Li
x
MoS
2
. With butyl lithium, the product is LiMoS
2
.
Use as lubricant
MoS
2
with particle sizes in the range of 1-100 µm is a common dry lubricant. Few alternatives exist that can confer the high lubricity and stability up to 350 °C in oxidizing environments. Sliding friction tests of MoS
2
using a pin on disc tester at low loads (0.1-2 N) give friction coefficient values of <0.1
Molybdenum disulfide is often a component of blends and composites where low friction is sought. A variety of oils and greases are used, because they retain their lubricity even in cases of almost complete oil loss, thus finding a use in critical applications such as aircraft engines. When added to plastics, MoS
2
forms a composite with improved strength as well as reduced friction. Polymers that have been filled with MoS
2
include nylon (with the trade name Nylatron), Teflon, and Vespel. Self-lubricating composite coatings for high-temperature applications have been developed consisting of molybdenum disulfide and titanium nitride by chemical vapor deposition.
Specific uses
MoS
2
is often used in two-stroke engines; e.g., motorcycle engines. It is also used in CV and universal joints. During the Vietnam War, the molybdenum disulfide product "Dri-Slide" was used to lubricate weapons, although it was supplied from private sources, not the military. MoS
2
-coatings allow bullets easier passage through the rifle barrel causing less barrel fouling allowing the barrel to retain ballistic accuracy much longer.
[8]
This resistance to barrel fouling comes at a cost of slower muzzle velocity with the same load due to a decreased chamber pressure. MoS
2
is applied to bearings in ultra-high vacuum applications up to 10
−9
torr (at -226 to 399°C). The lubricant is applied by burnishing and the excess is wiped from the bearing surface.
Use in petrochemistry
Synthetic MoS
2
is employed as a catalyst for desulfurization in petroleum refineries; e.g., hydrodesulfurization.
[10]
The effectiveness of the MoS
2
catalysts is enhanced by doping with small amounts of cobalt or nickel and the intimate mixture is supported on alumina. Such catalysts are generated in situ by treating molybdate/cobalt or nickel-impregnated alumina with H
2
S or an equivalent reagent.
Future Developments
Lubrication
There are currently no clear lubrication alternatives to molybdenum disulfide or the very similar tungsten disulfide that can resist temperatures higher than 350°C in oxidizing environments. Research has been conducted on compacted oxide layer glazes, which form during metallic surface sliding wear at several hundred degrees Celsius. However, because these oxide layers are physically-unstable, their use has currently not proven practical.
Photocatalyst
When combined with cadmium sulfide, MoS
2
increases the rate of photocatalytic hydrogen production.
2,Package:50kg/drum
3,D50um :0.8-5um
4,MOQ:10kg
Molybdenum disulfide is the main function of friction materials for low temperature anti-friction, high temperature by friction, loss on ignition of small, volatile materials in friction; friction.
Molybdenum disulfide is made of natural molybdenum concentrate powder after purification by chemical changes in molecular structure made of solid powder. This product is black Shaodai silver gray color, with metallic luster, a creamy touch of the flu, soluble in water. Products are well dispersed without the advantages of bonding, can be added in a variety of oils and fats, the formation of not Colloidal state bonding, to increase the oil's lubricating and extreme pressure. Also applies to high temperature, high pressure, high-speed high-load mechanical working condition, extend equipment life.
Summary
:High Pure Molybdenum Disulfide is in lead gray powder,dissolved in aqua regia,hot nitric acid and concentrated nitric acid,insoluble in water, dilute sulfuric acid and organic solvents. its chemical stability is good.
Application
: producing Molybdenum compounds,solid lubricants and the additive of various kinds of lubricants.
Package
:Iron drum. 50kg/drum. Inner packing is in two plastic bags,earch one is 25kg/bag.
Production
Molybdenite ore is processed by flotation to give relatively pure MoS
2
, the main contaminant being carbon. MoS
2
also arises by the thermal treatment of virtually all molybdenum compounds with hydrogen sulfide. Molybdenite is the principal ore from which molybdenum metal is extracted.
[edit] Structure and physical properties.
In MoS
2
, each Mo(IV) center is trigonal prismatic, being bound to six sulfide ligands, each of which is pyramidal. The trigonal prisms are interconnected to give a layered structure, wherein molybdenum atoms are sandwiched between layers of sulfur atoms. Because of the weak van der Waals interactions between the sheets of sulfide atoms, MoS
2
has a low coefficient of friction, resulting in its lubricating properties. Other layered inorganic materials exhibit lubricating properties (collectively known as solid lubricants or dry lubricants) including graphite, which requires volatile additives, and hexagonal boron nitride.
MoS
2
is diamagnetic and a semiconductor.
Chemical properties
Molybdenum disulfide is stable in air or oxygen at normal conditions, but reacts with oxygen upon heating forming molybdenum trioxide:
2 MoS
2
+ 9 O
2
→ 2 MoO
3
+ 4 SO
3
Chlorine attacks molybdenum disulfide at elevated temperatures to form molybdenum pentachloride:
2 MoS
2
+ 7 Cl
2
→ 2 MoCl
5
+ 2 S
2
Cl
2
Molybdenum disulfide reacts with alkyl lithium under controlled conditions to form intercalation compounds Li
x
MoS
2
. With butyl lithium, the product is LiMoS
2
.
Use as lubricant
MoS
2
with particle sizes in the range of 1-100 µm is a common dry lubricant. Few alternatives exist that can confer the high lubricity and stability up to 350 °C in oxidizing environments. Sliding friction tests of MoS
2
using a pin on disc tester at low loads (0.1-2 N) give friction coefficient values of <0.1
Molybdenum disulfide is often a component of blends and composites where low friction is sought. A variety of oils and greases are used, because they retain their lubricity even in cases of almost complete oil loss, thus finding a use in critical applications such as aircraft engines. When added to plastics, MoS
2
forms a composite with improved strength as well as reduced friction. Polymers that have been filled with MoS
2
include nylon (with the trade name Nylatron), Teflon, and Vespel. Self-lubricating composite coatings for high-temperature applications have been developed consisting of molybdenum disulfide and titanium nitride by chemical vapor deposition.
Specific uses
MoS
2
is often used in two-stroke engines; e.g., motorcycle engines. It is also used in CV and universal joints. During the Vietnam War, the molybdenum disulfide product "Dri-Slide" was used to lubricate weapons, although it was supplied from private sources, not the military. MoS
2
-coatings allow bullets easier passage through the rifle barrel causing less barrel fouling allowing the barrel to retain ballistic accuracy much longer.
[8]
This resistance to barrel fouling comes at a cost of slower muzzle velocity with the same load due to a decreased chamber pressure. MoS
2
is applied to bearings in ultra-high vacuum applications up to 10
−9
torr (at -226 to 399°C). The lubricant is applied by burnishing and the excess is wiped from the bearing surface.
Use in petrochemistry
Synthetic MoS
2
is employed as a catalyst for desulfurization in petroleum refineries; e.g., hydrodesulfurization.
[10]
The effectiveness of the MoS
2
catalysts is enhanced by doping with small amounts of cobalt or nickel and the intimate mixture is supported on alumina. Such catalysts are generated in situ by treating molybdate/cobalt or nickel-impregnated alumina with H
2
S or an equivalent reagent.
Future Developments
Lubrication
There are currently no clear lubrication alternatives to molybdenum disulfide or the very similar tungsten disulfide that can resist temperatures higher than 350°C in oxidizing environments. Research has been conducted on compacted oxide layer glazes, which form during metallic surface sliding wear at several hundred degrees Celsius. However, because these oxide layers are physically-unstable, their use has currently not proven practical.
Photocatalyst
When combined with cadmium sulfide, MoS
2
increases the rate of photocatalytic hydrogen production.
MOS2 lithium grease
1,EP MOS2 lithium grease
2, Lubrication of high loaded bearings
3,Operation temperature: -20~120
Distributor Wanted
Description
ArChine Arclith LMO 120 is a high performance EP grease on non-ageing mineral oil base formulated with molybdenum disulphides.
ArChine Arclith LMO 120 has many advantages,for example high drop point, non-ageing, high stability, water resistant, corrosion resistant, high pressure load capacity, good adhesiveness, and so on.
Application
ArChine Arclith LMO 120 is suitable for lubrication of roller and friction bearings under extreme pressure load. Molybdenum disulphides reduce friction and wear under temperature and pressure load.
ArChine Arclith LMO 120 also helps to smoothen new high loaded bearings.
Lubrication of high loaded bearings (e.g. pivoting bearings, pins, shafts, joints on trucks) threaded spindles and guides of lifting units.
Operation temperature: -20°C~120°C
Technical Data
ArChine Arclith LMO 120
Unit
Test method
Worked penetration,0.1mm
265-295
GB/T 269
Drop point,°C ≥
170
GB/T 4929
Water content, %
No
GB/T 512
Corrosiveness to Copper
(T3 Copper,100°C,3h)
Certification
SH/T 0331
Free alkalinity,NaoH% ≤
0.2
SH/T 0329
Distributing oil(presure method), ≤
12
GB/T 392
2, Lubrication of high loaded bearings
3,Operation temperature: -20~120
Distributor Wanted
Description
ArChine Arclith LMO 120 is a high performance EP grease on non-ageing mineral oil base formulated with molybdenum disulphides.
ArChine Arclith LMO 120 has many advantages,for example high drop point, non-ageing, high stability, water resistant, corrosion resistant, high pressure load capacity, good adhesiveness, and so on.
Application
ArChine Arclith LMO 120 is suitable for lubrication of roller and friction bearings under extreme pressure load. Molybdenum disulphides reduce friction and wear under temperature and pressure load.
ArChine Arclith LMO 120 also helps to smoothen new high loaded bearings.
Lubrication of high loaded bearings (e.g. pivoting bearings, pins, shafts, joints on trucks) threaded spindles and guides of lifting units.
Operation temperature: -20°C~120°C
Technical Data
ArChine Arclith LMO 120
Unit
Test method
Worked penetration,0.1mm
265-295
GB/T 269
Drop point,°C ≥
170
GB/T 4929
Water content, %
No
GB/T 512
Corrosiveness to Copper
(T3 Copper,100°C,3h)
Certification
SH/T 0331
Free alkalinity,NaoH% ≤
0.2
SH/T 0329
Distributing oil(presure method), ≤
12
GB/T 392
MOS2 mine Molybdenite
1,Lead gray powder,Dissolved in aqua regia,good chemical stability
2,Package:50kg/drum
3,D50um :<5um
4,MOQ:10kg
Production
Molybdenite ore is processed by flotation to give relatively pure MoS
2
, the main contaminant being carbon. MoS
2
also arises by the thermal treatment of virtually all molybdenum compounds with hydrogen sulfide. Molybdenite is the principal ore from which molybdenum metal is extracted.
[edit] Structure and physical properties.
In MoS
2
, each Mo(IV) center is trigonal prismatic, being bound to six sulfide ligands, each of which is pyramidal. The trigonal prisms are interconnected to give a layered structure, wherein molybdenum atoms are sandwiched between layers of sulfur atoms. Because of the weak van der Waals interactions between the sheets of sulfide atoms, MoS
2
has a low coefficient of friction, resulting in its lubricating properties. Other layered inorganic materials exhibit lubricating properties (collectively known as solid lubricants or dry lubricants) including graphite, which requires volatile additives, and hexagonal boron nitride.
MoS
2
is diamagnetic and a semiconductor.
Chemical properties
Molybdenum disulfide is stable in air or oxygen at normal conditions, but reacts with oxygen upon heating forming molybdenum trioxide:
2 MoS
2
+ 9 O
2
→ 2 MoO
3
+ 4 SO
3
Chlorine attacks molybdenum disulfide at elevated temperatures to form molybdenum pentachloride:
2 MoS
2
+ 7 Cl
2
→ 2 MoCl
5
+ 2 S
2
Cl
2
Molybdenum disulfide reacts with alkyl lithium under controlled conditions to form intercalation compounds Li
x
MoS
2
. With butyl lithium, the product is LiMoS
2
.
Use as lubricant
MoS
2
with particle sizes in the range of 1-100 µm is a common dry lubricant. Few alternatives exist that can confer the high lubricity and stability up to 350 °C in oxidizing environments. Sliding friction tests of MoS
2
using a pin on disc tester at low loads (0.1-2 N) give friction coefficient values of <0.1
Molybdenum disulfide is often a component of blends and composites where low friction is sought. A variety of oils and greases are used, because they retain their lubricity even in cases of almost complete oil loss, thus finding a use in critical applications such as aircraft engines. When added to plastics, MoS
2
forms a composite with improved strength as well as reduced friction. Polymers that have been filled with MoS
2
include nylon (with the trade name Nylatron), Teflon, and Vespel. Self-lubricating composite coatings for high-temperature applications have been developed consisting of molybdenum disulfide and titanium nitride by chemical vapor deposition.
2,Package:50kg/drum
3,D50um :<5um
4,MOQ:10kg
Production
Molybdenite ore is processed by flotation to give relatively pure MoS
2
, the main contaminant being carbon. MoS
2
also arises by the thermal treatment of virtually all molybdenum compounds with hydrogen sulfide. Molybdenite is the principal ore from which molybdenum metal is extracted.
[edit] Structure and physical properties.
In MoS
2
, each Mo(IV) center is trigonal prismatic, being bound to six sulfide ligands, each of which is pyramidal. The trigonal prisms are interconnected to give a layered structure, wherein molybdenum atoms are sandwiched between layers of sulfur atoms. Because of the weak van der Waals interactions between the sheets of sulfide atoms, MoS
2
has a low coefficient of friction, resulting in its lubricating properties. Other layered inorganic materials exhibit lubricating properties (collectively known as solid lubricants or dry lubricants) including graphite, which requires volatile additives, and hexagonal boron nitride.
MoS
2
is diamagnetic and a semiconductor.
Chemical properties
Molybdenum disulfide is stable in air or oxygen at normal conditions, but reacts with oxygen upon heating forming molybdenum trioxide:
2 MoS
2
+ 9 O
2
→ 2 MoO
3
+ 4 SO
3
Chlorine attacks molybdenum disulfide at elevated temperatures to form molybdenum pentachloride:
2 MoS
2
+ 7 Cl
2
→ 2 MoCl
5
+ 2 S
2
Cl
2
Molybdenum disulfide reacts with alkyl lithium under controlled conditions to form intercalation compounds Li
x
MoS
2
. With butyl lithium, the product is LiMoS
2
.
Use as lubricant
MoS
2
with particle sizes in the range of 1-100 µm is a common dry lubricant. Few alternatives exist that can confer the high lubricity and stability up to 350 °C in oxidizing environments. Sliding friction tests of MoS
2
using a pin on disc tester at low loads (0.1-2 N) give friction coefficient values of <0.1
Molybdenum disulfide is often a component of blends and composites where low friction is sought. A variety of oils and greases are used, because they retain their lubricity even in cases of almost complete oil loss, thus finding a use in critical applications such as aircraft engines. When added to plastics, MoS
2
forms a composite with improved strength as well as reduced friction. Polymers that have been filled with MoS
2
include nylon (with the trade name Nylatron), Teflon, and Vespel. Self-lubricating composite coatings for high-temperature applications have been developed consisting of molybdenum disulfide and titanium nitride by chemical vapor deposition.
MOS2
1,molybdenum disulfide:lead grey powder
2,Package:50kg/drum
3,D50um :<1.5um
4,MOQ:10kg
Molybdenum disulfide
is the inorganic compound with the formula MoS
2
. This black crystalline sulfide of molybdenum occurs as the mineral molybdenite. It is the principal ore from which molybdenum metal is extracted. The natural amorphous form is known as the rarer mineral jordisite. MoS
2
is less reactive than other transition metal chalcogenides, being unaffected by dilute acids. In its appearance and feel, molybdenum disulfide is similar to graphite. Indeed, like graphite, it is widely used as a solid lubricant because of its low friction properties, sometimes to relatively high temperatures.
Summary
:High Pure Molybdenum Disulfide is in lead gray powder,dissolved in aqua regia,hot nitric acid and concentrated nitric acid,insoluble in water, dilute sulfuric acid and organic solvents. its chemical stability is good.
Application
: producing Molybdenum compounds,solid lubricants and the additive of various kinds of lubricants.
Package
:Iron drum. 50kg/drum. Inner packing is in two plastic bags,earch one is 25kg/bag.
Feature
:
purity
99.9%max
low oil
0.05%min
moisture
0.05%min
Friction factor
0.05-0.09
Use in petrochemistry
Synthetic MoS
2
is employed as a catalyst for desulfurization in petroleum refineries; e.g., hydrodesulfurization.
[10]
The effectiveness of the MoS
2
catalysts is enhanced by doping with small amounts of cobalt or nickel and the intimate mixture is supported on alumina. Such catalysts are generated in situ by treating molybdate/cobalt or nickel-impregnated alumina with H
2
S or an equivalent reagent.
Future Developments
Lubrication
There are currently no clear lubrication alternatives to molybdenum disulfide or the very similar tungsten disulfide that can resist temperatures higher than 350°C in oxidizing environments. Research has been conducted on compacted oxide layer glazes, which form during metallic surface sliding wear at several hundred degrees Celsius. However, because these oxide layers are physically-unstable, their use has currently not proven practical.
Photocatalyst
When combined with cadmium sulfide, MoS
2
increases the rate of photocatalytic hydrogen production
2,Package:50kg/drum
3,D50um :<1.5um
4,MOQ:10kg
Molybdenum disulfide
is the inorganic compound with the formula MoS
2
. This black crystalline sulfide of molybdenum occurs as the mineral molybdenite. It is the principal ore from which molybdenum metal is extracted. The natural amorphous form is known as the rarer mineral jordisite. MoS
2
is less reactive than other transition metal chalcogenides, being unaffected by dilute acids. In its appearance and feel, molybdenum disulfide is similar to graphite. Indeed, like graphite, it is widely used as a solid lubricant because of its low friction properties, sometimes to relatively high temperatures.
Summary
:High Pure Molybdenum Disulfide is in lead gray powder,dissolved in aqua regia,hot nitric acid and concentrated nitric acid,insoluble in water, dilute sulfuric acid and organic solvents. its chemical stability is good.
Application
: producing Molybdenum compounds,solid lubricants and the additive of various kinds of lubricants.
Package
:Iron drum. 50kg/drum. Inner packing is in two plastic bags,earch one is 25kg/bag.
Feature
:
purity
99.9%max
low oil
0.05%min
moisture
0.05%min
Friction factor
0.05-0.09
Use in petrochemistry
Synthetic MoS
2
is employed as a catalyst for desulfurization in petroleum refineries; e.g., hydrodesulfurization.
[10]
The effectiveness of the MoS
2
catalysts is enhanced by doping with small amounts of cobalt or nickel and the intimate mixture is supported on alumina. Such catalysts are generated in situ by treating molybdate/cobalt or nickel-impregnated alumina with H
2
S or an equivalent reagent.
Future Developments
Lubrication
There are currently no clear lubrication alternatives to molybdenum disulfide or the very similar tungsten disulfide that can resist temperatures higher than 350°C in oxidizing environments. Research has been conducted on compacted oxide layer glazes, which form during metallic surface sliding wear at several hundred degrees Celsius. However, because these oxide layers are physically-unstable, their use has currently not proven practical.
Photocatalyst
When combined with cadmium sulfide, MoS
2
increases the rate of photocatalytic hydrogen production
62Fully Refined Paraffin Wax(particle)
62Paraffin Wax(particle)
Melting Point:62-64
Oil content:<0.50%
Penetration degree:(25Celsius degree)<16
Color:28-30
62-64Fully Refined Paraffin Wax(particle)
Melting Point:62-64
Oil content:<0.50%
Penetration degree:(25Celsius degree)<16
Color:28-30
Brand: KunLun
Melting Point:62-64
Oil content:<0.50%
Penetration degree:(25Celsius degree)<16
Color:28-30
62-64Fully Refined Paraffin Wax(particle)
Melting Point:62-64
Oil content:<0.50%
Penetration degree:(25Celsius degree)<16
Color:28-30
Brand: KunLun
MOTORCYCLES OIL TREATMENT
MOTORCYCLES OIL TREATMENT
1) Formula USA
2) SONCAP/SASO/MSDS/CE/ISO...
3) M.O.Q. 5000pcs
4) Delivery: 15 days
MOTORCYCLES
OIL
TREATMENT
1.Reduces friction,extends engine life
2.Helps stop oil foaming for better lubrication
3.Protects against motor oil breakdown
1) Formula USA
2) SONCAP/SASO/MSDS/CE/ISO...
3) M.O.Q. 5000pcs
4) Delivery: 15 days
MOTORCYCLES
OIL
TREATMENT
1.Reduces friction,extends engine life
2.Helps stop oil foaming for better lubrication
3.Protects against motor oil breakdown
MOULD HIGH TEMPERATURE FUKKOL H.T. PASTE
MOULD HIGH TEMPERATURE FUKKOL H.T. PASTE
Can stand until 1400 degree
NO Carbonization,No Outflow,No Melting
M
OULD
HIGH TEMPERATURE FUKKOL H.T. PASTE
Description:
A white non-carbonized-under-high-temperature(
1400degree
) lubricating paste for lubrication of
all kinds of surfaces subject
to high load,
particularly operation at low speed and/or oscillating motion and of steel and non-ferrous metal screw ,
plug and bayonet joints.
Applications:
-
Anti-Seizlng
non-destructive disassembly of threaded conncetions subject to high temperatures,
i.e. at internal combustion engines and turbines oven after long service time.
-Corrosion protection for nuts and bolts,sockcts and spindles in refurenes, steel-and cement mills,
marine and agriculture.
Benefits:
-Best use-ONE single paste for MANY applications;
-
White-coloured, non-staining, outstanding lubricity
-
High pressure, low friction and low wear resistance, reliable anti-serze effect and corrosion protection.
-Economical and ecological solution for many plants and shops which have been depending on a number of special pastes so far.
-contains organic active molybdenum additive for increased performance.
-
No Outflow
---During Plastic injection Process it would not "contaminant"plastic parts.
-
No Melting
--It has high heart resistibility until 1400 degree
-
No Caronization
--Nano ceramic powder has resistbiliby to "Carbonizing"even at 1400 degree temperature.
Environment:
Ecology - FUKKOL H.T PASTE is non-toxic,contains
no ferrous metals
and
is free from graphite
,
molybdenum-disulphide and sulphide additives.
Typical physical properties
Appearance
White color
Basic
Synthetic oil compound with organic thickener and combination of white solid lubricants
Unworked penetration
280-320
Specific gravity
1.2g/cc at 20°C
Dropping point
None
Base oil viscosity
21mm2/s at 40°C
Temperature range
-40°C~+1400°C
Friction value
0.10-0.13
Degree of corrosion
1-90
Depth of wear
0.3um
Salt spray test
>500 hours
Four-ball tester
3800/4000N
Can stand until 1400 degree
NO Carbonization,No Outflow,No Melting
M
OULD
HIGH TEMPERATURE FUKKOL H.T. PASTE
Description:
A white non-carbonized-under-high-temperature(
1400degree
) lubricating paste for lubrication of
all kinds of surfaces subject
to high load,
particularly operation at low speed and/or oscillating motion and of steel and non-ferrous metal screw ,
plug and bayonet joints.
Applications:
-
Anti-Seizlng
non-destructive disassembly of threaded conncetions subject to high temperatures,
i.e. at internal combustion engines and turbines oven after long service time.
-Corrosion protection for nuts and bolts,sockcts and spindles in refurenes, steel-and cement mills,
marine and agriculture.
Benefits:
-Best use-ONE single paste for MANY applications;
-
White-coloured, non-staining, outstanding lubricity
-
High pressure, low friction and low wear resistance, reliable anti-serze effect and corrosion protection.
-Economical and ecological solution for many plants and shops which have been depending on a number of special pastes so far.
-contains organic active molybdenum additive for increased performance.
-
No Outflow
---During Plastic injection Process it would not "contaminant"plastic parts.
-
No Melting
--It has high heart resistibility until 1400 degree
-
No Caronization
--Nano ceramic powder has resistbiliby to "Carbonizing"even at 1400 degree temperature.
Environment:
Ecology - FUKKOL H.T PASTE is non-toxic,contains
no ferrous metals
and
is free from graphite
,
molybdenum-disulphide and sulphide additives.
Typical physical properties
Appearance
White color
Basic
Synthetic oil compound with organic thickener and combination of white solid lubricants
Unworked penetration
280-320
Specific gravity
1.2g/cc at 20°C
Dropping point
None
Base oil viscosity
21mm2/s at 40°C
Temperature range
-40°C~+1400°C
Friction value
0.10-0.13
Degree of corrosion
1-90
Depth of wear
0.3um
Salt spray test
>500 hours
Four-ball tester
3800/4000N
MOULD HIGH TEMPERATURE FUKKOL H.T. PASTE
FUKKOL H.T. PASTE
Can stand until 1400 degree
NO Carbonization,No Outflow,No Melting
FUKKOL H.T. PASTE
Description:
A white non-carbonized-under-high-temperature(
1400degree
) lubricating paste for lubrication of
all kinds of surfaces subject
to high load,
particularly operation at low speed and/or oscillating motion and of steel and non-ferrous metal screw ,
plug and bayonet joints.
Applications:
-
Anti-Seizlng
non-destructive disassembly of threaded conncetions subject to high temperatures,
i.e. at internal combustion engines and turbines oven after long service time.
-Corrosion protection for nuts and bolts,sockcts and spindles in refurenes, steel-and cement mills,
marine and agriculture.
Benefits:
-Best use-ONE single paste for MANY applications;
-
White-coloured, non-staining, outstanding lubricity
-
High pressure, low friction and low wear resistance, reliable anti-serze effect and corrosion protection.
-Economical and ecological solution for many plants and shops which have been depending on a number of special pastes so far.
-contains organic active molybdenum additive for increased performance.
-
No Outflow
---During Plastic injection Process it would not "contaminant"plastic parts.
-
No Melting
--It has high heart resistibility until 1400 degree
-
No Caronization
--Nano ceramic powder has resistbiliby to "Carbonizing"even at 1400 degree temperature.
Environment:
Ecology - FUKKOL H.T PASTE is non-toxic,contains
no ferrous metals
and
is free from graphite
,
molybdenum-disulphide and sulphide additives.
Typical physical properties
Appearance
White color
Basic
Synthetic oil compound with organic thickener and combination of white solid lubricants
Unworked penetration
280-320
Specific gravity
1.2g/cc at 20°C
Dropping point
None
Base oil viscosity
21mm2/s at 40°C
Temperature range
-40°C~+1400°C
Friction value
0.10-0.13
Degree of corrosion
1-90
Depth of wear
0.3um
Salt spray test
>500 hours
Four-ball tester
3800/4000N
Can stand until 1400 degree
NO Carbonization,No Outflow,No Melting
FUKKOL H.T. PASTE
Description:
A white non-carbonized-under-high-temperature(
1400degree
) lubricating paste for lubrication of
all kinds of surfaces subject
to high load,
particularly operation at low speed and/or oscillating motion and of steel and non-ferrous metal screw ,
plug and bayonet joints.
Applications:
-
Anti-Seizlng
non-destructive disassembly of threaded conncetions subject to high temperatures,
i.e. at internal combustion engines and turbines oven after long service time.
-Corrosion protection for nuts and bolts,sockcts and spindles in refurenes, steel-and cement mills,
marine and agriculture.
Benefits:
-Best use-ONE single paste for MANY applications;
-
White-coloured, non-staining, outstanding lubricity
-
High pressure, low friction and low wear resistance, reliable anti-serze effect and corrosion protection.
-Economical and ecological solution for many plants and shops which have been depending on a number of special pastes so far.
-contains organic active molybdenum additive for increased performance.
-
No Outflow
---During Plastic injection Process it would not "contaminant"plastic parts.
-
No Melting
--It has high heart resistibility until 1400 degree
-
No Caronization
--Nano ceramic powder has resistbiliby to "Carbonizing"even at 1400 degree temperature.
Environment:
Ecology - FUKKOL H.T PASTE is non-toxic,contains
no ferrous metals
and
is free from graphite
,
molybdenum-disulphide and sulphide additives.
Typical physical properties
Appearance
White color
Basic
Synthetic oil compound with organic thickener and combination of white solid lubricants
Unworked penetration
280-320
Specific gravity
1.2g/cc at 20°C
Dropping point
None
Base oil viscosity
21mm2/s at 40°C
Temperature range
-40°C~+1400°C
Friction value
0.10-0.13
Degree of corrosion
1-90
Depth of wear
0.3um
Salt spray test
>500 hours
Four-ball tester
3800/4000N
MOULD RELEASE AGENT (NON-PAINTABLE) FUKKOL
FUKKOL MOULD RELEASE AGENT (NON-PAINTABLE)
GOOD thermal stability
Unique Effective and long lasting film
FUKKOL MOULD RELEASE AGENT (NON-PAINTABLE)
Description
FUKKOL MOULD RELEASE AGENT(NON - PAINTBLE) is an aerosol applied release agent comtaining a highly effective silicone oil,
specially formulated to provide a quick, effective,
non-staining release of plastics and rubber for most types of plastic injection moulding.
Benefits
-Ultra fine spray gives controlled application with complete coverage
-
Improved finish and reduced risk of over application
-Reduces problems associated with marking and transfer, highly economical, efficient release,
only one pass required for many shots of ejection
-
Effective and long lasting film
provides
more numbers of release
than most silicone formulations
-Low environmental impact, contains no CFC propellant
Non staining property makes it an excellent lubricant for textile and paper industry.
Precautions
*Pressurised container, protect from sunlight, store at temperature below 50°C
*Do not puncture or incinerate
*Do not spray on to naked flames
*Inflammable
Typical Date
Propellant LPG
Solvent Chlorinated Solvent
Active ingredient Silicone Oil
GOOD thermal stability
Unique Effective and long lasting film
FUKKOL MOULD RELEASE AGENT (NON-PAINTABLE)
Description
FUKKOL MOULD RELEASE AGENT(NON - PAINTBLE) is an aerosol applied release agent comtaining a highly effective silicone oil,
specially formulated to provide a quick, effective,
non-staining release of plastics and rubber for most types of plastic injection moulding.
Benefits
-Ultra fine spray gives controlled application with complete coverage
-
Improved finish and reduced risk of over application
-Reduces problems associated with marking and transfer, highly economical, efficient release,
only one pass required for many shots of ejection
-
Effective and long lasting film
provides
more numbers of release
than most silicone formulations
-Low environmental impact, contains no CFC propellant
Non staining property makes it an excellent lubricant for textile and paper industry.
Precautions
*Pressurised container, protect from sunlight, store at temperature below 50°C
*Do not puncture or incinerate
*Do not spray on to naked flames
*Inflammable
Typical Date
Propellant LPG
Solvent Chlorinated Solvent
Active ingredient Silicone Oil
MOULD RELEASE AGENT (PAINTABLE) FUKKOL
MOULD RELEASE AGENT
PLASTICS AND RUBBER NON-STAINING RELEASE OF FOR MOST TYPES OF PLASTIC INJECTION MOULDING
FUKKOL MOULD RELEASE AGENT
(PAINTABLE)
http://www.fukkol-lube.com/asp-bin/EN/?page=1
Description
FUKKOL PAINTABLE is an aerosol applied release agent formulated to provide a quick, effective,
non - staining
release of plastics and rubber for most types of
plastic injection moulding
.
In addition, it is specially designed for products subject to subsequent processes such as printing,
painting, plating, hot stamping and bonding operations without the so- called “SILICONE PROBLEMS”.
Benefits
-Ultra fine spray gives controlled application with
complete coverage
-Improved finish and
reduced risk
of over application
-Reduces problems associated with marking and
transporting, highly economical
, efficient release,
only one pass required for many shots of ejection.
-Effective and
long lasting film
provides more numbers of release than most silicone formulations
-Low environmental impact,
contains no CFC propellant
-Excellent for
all thermal plastic,
especially ABS and PS
-Will not affect subsequent operations.
-Excellent lubricant for
sewing threads
,
table surface
,
needles and knives
.
Precautions
*
Pressure container, protect from sunlight, store at temperature below 50°C
*
Do not puncture or incinerate
*
Do not spray onto flames
*
Inflammable
Typical Data
Propellant LPG
Solvent N. Hexane
Base Fluid EP Powder
Working Temperatrue Range Up to 270°C
PLASTICS AND RUBBER NON-STAINING RELEASE OF FOR MOST TYPES OF PLASTIC INJECTION MOULDING
FUKKOL MOULD RELEASE AGENT
(PAINTABLE)
http://www.fukkol-lube.com/asp-bin/EN/?page=1
Description
FUKKOL PAINTABLE is an aerosol applied release agent formulated to provide a quick, effective,
non - staining
release of plastics and rubber for most types of
plastic injection moulding
.
In addition, it is specially designed for products subject to subsequent processes such as printing,
painting, plating, hot stamping and bonding operations without the so- called “SILICONE PROBLEMS”.
Benefits
-Ultra fine spray gives controlled application with
complete coverage
-Improved finish and
reduced risk
of over application
-Reduces problems associated with marking and
transporting, highly economical
, efficient release,
only one pass required for many shots of ejection.
-Effective and
long lasting film
provides more numbers of release than most silicone formulations
-Low environmental impact,
contains no CFC propellant
-Excellent for
all thermal plastic,
especially ABS and PS
-Will not affect subsequent operations.
-Excellent lubricant for
sewing threads
,
table surface
,
needles and knives
.
Precautions
*
Pressure container, protect from sunlight, store at temperature below 50°C
*
Do not puncture or incinerate
*
Do not spray onto flames
*
Inflammable
Typical Data
Propellant LPG
Solvent N. Hexane
Base Fluid EP Powder
Working Temperatrue Range Up to 270°C
MOULD RELEASER (NON-PAINTABLE) FUKKOL
MOULD RELEASER
no CFC propellant
GOOD thermal stability
Unique Effective and long lasting film
FUKKOL MOULD RELEASE AGENT (NON-PAINTABLE)
http://www.fukkol-lube.com/asp-bin/EN/?page=1
Description
FUKKOL MOULD RELEASE AGENT(NON - PAINTBLE) is an aerosol applied release agent comtaining
a highly effective silicone oil,
specially formulated to provide a quick, effective,
non-staining release of plastics and rubber for most types of plastic injection moulding.
Benefits
-Ultra fine spray gives controlled application with complete coverage
-
Improved finish and reduced risk of over application
-Reduces problems associated with marking and transfer, highly economical, efficient release,
only one pass required for many shots of ejection
-
Effective and long lasting film
provides
more numbers of release
than most silicone formulations
-Low environmental impact, contains no CFC propellant
Non staining property makes it an excellent lubricant for textile and paper industry.
Precautions
*Pressurised container, protect from sunlight, store at temperature below 50°C
*Do not puncture or incinerate
*Do not spray on to naked flames
*Inflammable
Typical Date
Propellant LPG
Solvent Chlorinated Solvent
Active ingredient Silicone Oil
no CFC propellant
GOOD thermal stability
Unique Effective and long lasting film
FUKKOL MOULD RELEASE AGENT (NON-PAINTABLE)
http://www.fukkol-lube.com/asp-bin/EN/?page=1
Description
FUKKOL MOULD RELEASE AGENT(NON - PAINTBLE) is an aerosol applied release agent comtaining
a highly effective silicone oil,
specially formulated to provide a quick, effective,
non-staining release of plastics and rubber for most types of plastic injection moulding.
Benefits
-Ultra fine spray gives controlled application with complete coverage
-
Improved finish and reduced risk of over application
-Reduces problems associated with marking and transfer, highly economical, efficient release,
only one pass required for many shots of ejection
-
Effective and long lasting film
provides
more numbers of release
than most silicone formulations
-Low environmental impact, contains no CFC propellant
Non staining property makes it an excellent lubricant for textile and paper industry.
Precautions
*Pressurised container, protect from sunlight, store at temperature below 50°C
*Do not puncture or incinerate
*Do not spray on to naked flames
*Inflammable
Typical Date
Propellant LPG
Solvent Chlorinated Solvent
Active ingredient Silicone Oil
MOULD RELEASER (PAINTABLE) FUKKOL
MOULD RELEASER AGENT
PLASTICS AND RUBBER NON-STAINING RELEASE OF FOR MOST TYPES OF PLASTIC INJECTION MOULDING
FUKKOL MOULD RELEASE AGENT
(PAINTABLE)
http://www.fukkol-lube.com/asp-bin/EN/?page=1
Description
FUKKOL PAINTABLE is an aerosol applied release agent formulated to provide a quick, effective,
non - staining
release of plastics and rubber for most types of
plastic injection moulding
.
In addition, it is specially designed for products subject to subsequent processes such as printing,
painting, plating, hot stamping and bonding operations without the so- called “SILICONE PROBLEMS”.
Benefits
-Ultra fine spray gives controlled application with
complete coverage
-Improved finish and
reduced risk
of over application
-Reduces problems associated with marking and
transporting, highly economical
, efficient release,
only one pass required for many shots of ejection.
-Effective and
long lasting film
provides more numbers of release than most silicone formulations
-Low environmental impact,
contains no CFC propellant
-Excellent for
all thermal plastic,
especially ABS and PS
-Will not affect subsequent operations.
-Excellent lubricant for
sewing threads
,
table surface
,
needles and knives
.
Precautions
*
Pressure container, protect from sunlight, store at temperature below 50°C
*
Do not puncture or incinerate
*
Do not spray onto flames
*
Inflammable
Typical Data
Propellant LPG
Solvent N. Hexane
Base Fluid EP Powder
Working Temperatrue Range Up to 270°C
PLASTICS AND RUBBER NON-STAINING RELEASE OF FOR MOST TYPES OF PLASTIC INJECTION MOULDING
FUKKOL MOULD RELEASE AGENT
(PAINTABLE)
http://www.fukkol-lube.com/asp-bin/EN/?page=1
Description
FUKKOL PAINTABLE is an aerosol applied release agent formulated to provide a quick, effective,
non - staining
release of plastics and rubber for most types of
plastic injection moulding
.
In addition, it is specially designed for products subject to subsequent processes such as printing,
painting, plating, hot stamping and bonding operations without the so- called “SILICONE PROBLEMS”.
Benefits
-Ultra fine spray gives controlled application with
complete coverage
-Improved finish and
reduced risk
of over application
-Reduces problems associated with marking and
transporting, highly economical
, efficient release,
only one pass required for many shots of ejection.
-Effective and
long lasting film
provides more numbers of release than most silicone formulations
-Low environmental impact,
contains no CFC propellant
-Excellent for
all thermal plastic,
especially ABS and PS
-Will not affect subsequent operations.
-Excellent lubricant for
sewing threads
,
table surface
,
needles and knives
.
Precautions
*
Pressure container, protect from sunlight, store at temperature below 50°C
*
Do not puncture or incinerate
*
Do not spray onto flames
*
Inflammable
Typical Data
Propellant LPG
Solvent N. Hexane
Base Fluid EP Powder
Working Temperatrue Range Up to 270°C
MOULD RELEASER AGENT FUKKOL
K-RESIN MOULD RELEASE AGENT FUKKOL
NON-STAINING RELEASE OF PLASTICS AND RUBBER FOR MOST TYPES OF PLASTIC INJECTION MOULDING
FUKKOL MOULD RELEASE AGENT
(NON-PAINTABLE)
Description:
FUKKOL MOULD RELEASE AGENT(NON- PAINTABLE)
is an aerosol applied release agent comtaining a highly effective silicone oil, specially formulated to provide a quick, effective,
non-staining
release of plastics and rubber for most types of plastic injection moulding.
Its specially designed nozzle provides a very fine spray pattern which allows the quantity applied to be fully controlled and the most complicated dies to be completely covered.
Benefits:
-
Ultra fine spray
gives controlled application with complete coverage
-Improved finish and reduced risk of over application
-Reduces problems associated with marking and transfering, highly economical, efficient release, only one pass required for many shots of ejection
-Effective and long lasting film provides more numbers of release than most silicone formulations
-Low environmental impact, contains no CFC propellant
Non staining property makes it an excellent lubricant for textile and paper industry.
Precautions:
Pressurised container, protect from sunlight, store at temperature below 50°C
Do not puncture or incinerate
Do not spray on to naked flame
Flammable.
Typical Data
Active Ingredient
Silicone Oil
Solvent
Hexyl Hydride
Propellant
LPG
NON-STAINING RELEASE OF PLASTICS AND RUBBER FOR MOST TYPES OF PLASTIC INJECTION MOULDING
FUKKOL MOULD RELEASE AGENT
(NON-PAINTABLE)
Description:
FUKKOL MOULD RELEASE AGENT(NON- PAINTABLE)
is an aerosol applied release agent comtaining a highly effective silicone oil, specially formulated to provide a quick, effective,
non-staining
release of plastics and rubber for most types of plastic injection moulding.
Its specially designed nozzle provides a very fine spray pattern which allows the quantity applied to be fully controlled and the most complicated dies to be completely covered.
Benefits:
-
Ultra fine spray
gives controlled application with complete coverage
-Improved finish and reduced risk of over application
-Reduces problems associated with marking and transfering, highly economical, efficient release, only one pass required for many shots of ejection
-Effective and long lasting film provides more numbers of release than most silicone formulations
-Low environmental impact, contains no CFC propellant
Non staining property makes it an excellent lubricant for textile and paper industry.
Precautions:
Pressurised container, protect from sunlight, store at temperature below 50°C
Do not puncture or incinerate
Do not spray on to naked flame
Flammable.
Typical Data
Active Ingredient
Silicone Oil
Solvent
Hexyl Hydride
Propellant
LPG
MP-3 Grease
Better mechanical invariability.(mp-3, grease, high grade grease)
This product is made of refined base oil thickened by fatty acid metallic soap thickener, added with many kinds of abrasion and extreme pressure resisting, anti-corrosive, antioxidant and rustproof additives.
Item
Typical Values
Appearance
Exquisite
Working cone penetration (0.1mm)
220~250
Dropping Point,
o
C ≥
180
Corrosion(T
2
sheet copper,100
o
C,24h)
No green or black change
of sheet copper
Steel mesh oil filtering(100
o
C,24h)% ≤
5
Evaporation capacity (99
o
C,22h)% ≤
2.0
Oxidation invariability (99
o
C,100h,0.760Mpa)
differential pressure Mpa ≤
0.07
Sprinkling loss(38
o
C,1h)% ≤
5
Performance:
High dropping point; Better mechanical invariability; Better colloid invariability; Less frictional coefficient.
Application:
The lubrication of rolling bearing, sliding bearing and other frictional parts on various mechanical equipment such as large and middle sized motor, mine machine, automobile and tractor, etc.
Temperature:
-20
o
C~130
o
C
Package:
450g, 800g, 15kg, 170kg in metal pail or according to customers requirement.
(mp-3, grease, high grade grease)
This product is made of refined base oil thickened by fatty acid metallic soap thickener, added with many kinds of abrasion and extreme pressure resisting, anti-corrosive, antioxidant and rustproof additives.
Item
Typical Values
Appearance
Exquisite
Working cone penetration (0.1mm)
220~250
Dropping Point,
o
C ≥
180
Corrosion(T
2
sheet copper,100
o
C,24h)
No green or black change
of sheet copper
Steel mesh oil filtering(100
o
C,24h)% ≤
5
Evaporation capacity (99
o
C,22h)% ≤
2.0
Oxidation invariability (99
o
C,100h,0.760Mpa)
differential pressure Mpa ≤
0.07
Sprinkling loss(38
o
C,1h)% ≤
5
Performance:
High dropping point; Better mechanical invariability; Better colloid invariability; Less frictional coefficient.
Application:
The lubrication of rolling bearing, sliding bearing and other frictional parts on various mechanical equipment such as large and middle sized motor, mine machine, automobile and tractor, etc.
Temperature:
-20
o
C~130
o
C
Package:
450g, 800g, 15kg, 170kg in metal pail or according to customers requirement.
(mp-3, grease, high grade grease)
MPS01-1 forming oil
value of the good lubricity, extreme pressure anti-wear
This product is refined mineral oil based compound into the extreme pressure, oil and rust, and other special additives made with good lubricity, extreme pressure anti-wear, rust and oxidation resistance and other security . Can effectively protect the mold, to meet the standard parts and non-standard parts of the multi-station forming process.
Uses:
For titanium, stainless steel molding process can also be used for thread rolling, tapping and other processing.
Technical parameters:
Test Project
Technical parameters
Test Method
Appearance
Dark brown oil
Head Measurement
Kinematic viscosity (40 °C) mm2 / s
68 ± 10%
GB/T265
Mechanical impurities
No
GB/T511 - 88
Pb-free card to bite the largest load value (N)
≥ 780
GB/T3142
Pd sintering load value (N)
≥ 6800
GB/T3142
Performance characteristics:
value of the good lubricity, extreme pressure anti-wear
excellent rust resistance and high temperature anti-oxidation stability
the effective protection of punch (red needles) and die, to extend life, reduce overall costs.
High temperature performance, difficult to produce sludge, phosphate treatment on the resist has a good clean wire settling.
low-odor, low smoke, protect the operating environment.
Pb values: display oil lubrication, Pd values are displayed under high temperature and pressure oil extreme pressure performance, the value of common lubricants Pb 280, Pd value is 1200.
Pb, Pd showed higher value the better the performance of oil lubricated.
This product is refined mineral oil based compound into the extreme pressure, oil and rust, and other special additives made with good lubricity, extreme pressure anti-wear, rust and oxidation resistance and other security . Can effectively protect the mold, to meet the standard parts and non-standard parts of the multi-station forming process.
Uses:
For titanium, stainless steel molding process can also be used for thread rolling, tapping and other processing.
Technical parameters:
Test Project
Technical parameters
Test Method
Appearance
Dark brown oil
Head Measurement
Kinematic viscosity (40 °C) mm2 / s
68 ± 10%
GB/T265
Mechanical impurities
No
GB/T511 - 88
Pb-free card to bite the largest load value (N)
≥ 780
GB/T3142
Pd sintering load value (N)
≥ 6800
GB/T3142
Performance characteristics:
value of the good lubricity, extreme pressure anti-wear
excellent rust resistance and high temperature anti-oxidation stability
the effective protection of punch (red needles) and die, to extend life, reduce overall costs.
High temperature performance, difficult to produce sludge, phosphate treatment on the resist has a good clean wire settling.
low-odor, low smoke, protect the operating environment.
Pb values: display oil lubrication, Pd values are displayed under high temperature and pressure oil extreme pressure performance, the value of common lubricants Pb 280, Pd value is 1200.
Pb, Pd showed higher value the better the performance of oil lubricated.
64 Fully Refined Paraffin Wax(particle)
64-66Paraffin Wax(particle)
Melting Point:64-66
Oil content:<0.50%
Penetration degree:(25Celsius degree)<16
Color:28-30
64-66Fully Refined Paraffin Wax(particle)
Melting Point:64-66
Oil content:<0.50%
Penetration degree:(25Celsius degree)<16
Color:28-30
Brand:KunLun
Melting Point:64-66
Oil content:<0.50%
Penetration degree:(25Celsius degree)<16
Color:28-30
64-66Fully Refined Paraffin Wax(particle)
Melting Point:64-66
Oil content:<0.50%
Penetration degree:(25Celsius degree)<16
Color:28-30
Brand:KunLun
MPS01A forming oil
Can effectively protect the mold, to meet the standard parts and non-standard parts of the multi-station forming process.
This product is refined mineral oil based compound into the extreme pressure, oil and rust, and other special additives made with good lubricity, extreme pressure anti-wear, rust and oxidation resistance and other security . Can effectively protect the mold, to meet the standard parts and non-standard parts of the multi-station forming process.
Uses:
For titanium, stainless steel molding process can also be used for thread rolling, tapping and other processing.
Technical parameters:
Test Project
Technical parameters
Test Method
Appearance
Dark brown oil
Head Measurement
Kinematic viscosity (40 °C) mm2 / s
68 ± 10%
GB/T265
Mechanical impurities
No
GB/T511 - 88
Pb-free card to bite the largest load value (N)
≥ 780
GB/T3142
Pd sintering load value (N)
≥ 6800
GB/T3142
Performance characteristics:
value of the good lubricity, extreme pressure anti-wear
excellent rust resistance and high temperature anti-oxidation stability
the effective protection of punch (red needles) and die, to extend life, reduce overall costs.
High temperature performance, difficult to produce sludge, phosphate treatment on the resist has a good clean wire settling.
low-odor, low smoke, protect the operating environment.
Pb values: display oil lubrication, Pd values are displayed under high temperature and pressure oil extreme pressure performance, the value of common lubricants Pb 280, Pd value is 1200.
Pb, Pd showed higher value the better the performance of oil lubricated.
This product is refined mineral oil based compound into the extreme pressure, oil and rust, and other special additives made with good lubricity, extreme pressure anti-wear, rust and oxidation resistance and other security . Can effectively protect the mold, to meet the standard parts and non-standard parts of the multi-station forming process.
Uses:
For titanium, stainless steel molding process can also be used for thread rolling, tapping and other processing.
Technical parameters:
Test Project
Technical parameters
Test Method
Appearance
Dark brown oil
Head Measurement
Kinematic viscosity (40 °C) mm2 / s
68 ± 10%
GB/T265
Mechanical impurities
No
GB/T511 - 88
Pb-free card to bite the largest load value (N)
≥ 780
GB/T3142
Pd sintering load value (N)
≥ 6800
GB/T3142
Performance characteristics:
value of the good lubricity, extreme pressure anti-wear
excellent rust resistance and high temperature anti-oxidation stability
the effective protection of punch (red needles) and die, to extend life, reduce overall costs.
High temperature performance, difficult to produce sludge, phosphate treatment on the resist has a good clean wire settling.
low-odor, low smoke, protect the operating environment.
Pb values: display oil lubrication, Pd values are displayed under high temperature and pressure oil extreme pressure performance, the value of common lubricants Pb 280, Pd value is 1200.
Pb, Pd showed higher value the better the performance of oil lubricated.
MPS01A-1 forming oil
High temperature performance, difficult to produce sludge, phosphate treatment on the resist has a good clean wire settling.
This product is refined mineral oil based compound into the extreme pressure, oil and rust, and other special additives made with good lubricity, extreme pressure anti-wear, rust and oxidation resistance and other security . Can effectively protect the mold, to meet the standard parts and non-standard parts of the multi-station forming process.
Uses:
For titanium, stainless steel molding process can also be used for thread rolling, tapping and other processing.
Technical parameters:
Test Project
Technical parameters
Test Method
Appearance
Dark brown oil
Head Measurement
Kinematic viscosity (40 °C) mm2 / s
68 ± 10%
GB/T265
Mechanical impurities
No
GB/T511 - 88
Pb-free card to bite the largest load value (N)
≥ 780
GB/T3142
Pd sintering load value (N)
≥ 6800
GB/T3142
Performance characteristics:
value of the good lubricity, extreme pressure anti-wear
excellent rust resistance and high temperature anti-oxidation stability
the effective protection of punch (red needles) and die, to extend life, reduce overall costs.
High temperature performance, difficult to produce sludge, phosphate treatment on the resist has a good clean wire settling.
low-odor, low smoke, protect the operating environment.
Pb values: display oil lubrication, Pd values are displayed under high temperature and pressure oil extreme pressure performance, the value of common lubricants Pb 280, Pd value is 1200.
Pb, Pd showed higher value the better the performance of oil lubricated.
This product is refined mineral oil based compound into the extreme pressure, oil and rust, and other special additives made with good lubricity, extreme pressure anti-wear, rust and oxidation resistance and other security . Can effectively protect the mold, to meet the standard parts and non-standard parts of the multi-station forming process.
Uses:
For titanium, stainless steel molding process can also be used for thread rolling, tapping and other processing.
Technical parameters:
Test Project
Technical parameters
Test Method
Appearance
Dark brown oil
Head Measurement
Kinematic viscosity (40 °C) mm2 / s
68 ± 10%
GB/T265
Mechanical impurities
No
GB/T511 - 88
Pb-free card to bite the largest load value (N)
≥ 780
GB/T3142
Pd sintering load value (N)
≥ 6800
GB/T3142
Performance characteristics:
value of the good lubricity, extreme pressure anti-wear
excellent rust resistance and high temperature anti-oxidation stability
the effective protection of punch (red needles) and die, to extend life, reduce overall costs.
High temperature performance, difficult to produce sludge, phosphate treatment on the resist has a good clean wire settling.
low-odor, low smoke, protect the operating environment.
Pb values: display oil lubrication, Pd values are displayed under high temperature and pressure oil extreme pressure performance, the value of common lubricants Pb 280, Pd value is 1200.
Pb, Pd showed higher value the better the performance of oil lubricated.
MPS02A forming oil
This product has good lubricity, extreme pressure anti-wear, rust resistance and high temperature oxidation security.
MM15A
upsetting the oil temperature
This product has good lubricity, extreme pressure anti-wear, rust resistance and high temperature oxidation security. Can effectively protect the mold, to meet the standard parts and non-standard parts forming a multi-station, the processing temperature up to 800 °C, can be fully qualified warm forging of stainless steel workpiece. High temperature resistance with sintering additives, is ideal for warm forging of stainless steel nuts, nuts.
Uses:
Mainly used for warm forging stainless steel nuts, nut; also be used for other parts of the warm forging of stainless steel processing.
Technical parameters:
Test Project
Technical parameters
Test Method
Appearance
Dark brown oil
Head Measurement
Kinematic viscosity (40 °C) mm2 / s
180/250
GB/T265
Mechanical impurities
No
GB/T511 - 88
Pb-free card to bite the largest load value (N)
≥ 920
GB/T3142
Pd sintering load value (N)
≥ 6800
GB/T3142
Performance characteristics:
Good lubricity, extreme pressure anti-wear
On the 4A, 4P and so easy to wear red bar has very good protection
Effective protection of punch (red needles) and die, to extend life, reduce overall costs.
High-temperature performance, difficult to produce sludge.
Low odor, low smoke, protect the operating environment.
MM15A stainless steel molding can replace expensive oil imports of the same type of high-quality products to meet the harsh temperature and the forging of stainless steel forming stainless steel variant with large amounts of forming. MM15A sub-medium viscosity (180) and high viscosity (250) are two viscosity grades.
Pb values: display oil lubrication, Pd values are displayed under high temperature and pressure oil extreme pressure performance, the value of common lubricants Pb 280, Pd value is 1200.
Pb, Pd showed higher value the better the performance of oil lubricated.
MM15A
upsetting the oil temperature
This product has good lubricity, extreme pressure anti-wear, rust resistance and high temperature oxidation security. Can effectively protect the mold, to meet the standard parts and non-standard parts forming a multi-station, the processing temperature up to 800 °C, can be fully qualified warm forging of stainless steel workpiece. High temperature resistance with sintering additives, is ideal for warm forging of stainless steel nuts, nuts.
Uses:
Mainly used for warm forging stainless steel nuts, nut; also be used for other parts of the warm forging of stainless steel processing.
Technical parameters:
Test Project
Technical parameters
Test Method
Appearance
Dark brown oil
Head Measurement
Kinematic viscosity (40 °C) mm2 / s
180/250
GB/T265
Mechanical impurities
No
GB/T511 - 88
Pb-free card to bite the largest load value (N)
≥ 920
GB/T3142
Pd sintering load value (N)
≥ 6800
GB/T3142
Performance characteristics:
Good lubricity, extreme pressure anti-wear
On the 4A, 4P and so easy to wear red bar has very good protection
Effective protection of punch (red needles) and die, to extend life, reduce overall costs.
High-temperature performance, difficult to produce sludge.
Low odor, low smoke, protect the operating environment.
MM15A stainless steel molding can replace expensive oil imports of the same type of high-quality products to meet the harsh temperature and the forging of stainless steel forming stainless steel variant with large amounts of forming. MM15A sub-medium viscosity (180) and high viscosity (250) are two viscosity grades.
Pb values: display oil lubrication, Pd values are displayed under high temperature and pressure oil extreme pressure performance, the value of common lubricants Pb 280, Pd value is 1200.
Pb, Pd showed higher value the better the performance of oil lubricated.
MPS03A cold heading oil
This product has good lubricity, extreme pressure anti-wear, rust resistance and high temperature oxidation security.
MPS03A
cold heading oil
This product has good lubricity, extreme pressure anti-wear, rust resistance and high temperature oxidation security. Can effectively protect the mold, to meet the standard parts and non-standard parts forming a multi-station, the processing temperature up to 500 °C, can be fully qualified for cold heading steel workpiece.
Uses:
Cold Heading for stainless steel nuts, screws, bolt, sleeve, stainless steel hollow, empty heart rivets, etc. forming.
Technical parameters:
Test Project
Technical parameters
Test Method
Appearance
Dark brown oil
Head Measurement
Kinematic viscosity (40 °C) mm2 / s
150/180
GB/T265
Mechanical impurities
No
GB/T511 - 88
Pb-free card to bite the largest load value (N)
≥ 980
GB/T3142
Pd sintering load value (N)
≥ 7200
GB/T3142
Performance characteristics:
The value of good lubricity, extreme pressure anti-wear, processing temperatures up to 800 °C.
Larger than on the product variant has a good processing properties, such as hollow, empty heart rivets, etc.;
Effective protection of punch (red needles) and die, to extend life, reduce overall costs.
igh-temperature performance, difficult to produce sludge.
Low odor, low smoke, protect the operating environment.
MPS03A cold heading oil can replace expensive imports of the same type of high-quality products to meet the demanding forming and cold heading steel greatly changed the amount of carbon-based molding process. MPS03A sub-medium viscosity (150) and high viscosity (180) are two viscosity grades.
Pb values: display oil lubrication, Pd values are displayed under high temperature and pressure oil extreme pressure performance, the value of common lubricants Pb 280, Pd value is 1200.
Pb, Pd showed higher value the better the performance of oil lubricated.
MPS03A
cold heading oil
This product has good lubricity, extreme pressure anti-wear, rust resistance and high temperature oxidation security. Can effectively protect the mold, to meet the standard parts and non-standard parts forming a multi-station, the processing temperature up to 500 °C, can be fully qualified for cold heading steel workpiece.
Uses:
Cold Heading for stainless steel nuts, screws, bolt, sleeve, stainless steel hollow, empty heart rivets, etc. forming.
Technical parameters:
Test Project
Technical parameters
Test Method
Appearance
Dark brown oil
Head Measurement
Kinematic viscosity (40 °C) mm2 / s
150/180
GB/T265
Mechanical impurities
No
GB/T511 - 88
Pb-free card to bite the largest load value (N)
≥ 980
GB/T3142
Pd sintering load value (N)
≥ 7200
GB/T3142
Performance characteristics:
The value of good lubricity, extreme pressure anti-wear, processing temperatures up to 800 °C.
Larger than on the product variant has a good processing properties, such as hollow, empty heart rivets, etc.;
Effective protection of punch (red needles) and die, to extend life, reduce overall costs.
igh-temperature performance, difficult to produce sludge.
Low odor, low smoke, protect the operating environment.
MPS03A cold heading oil can replace expensive imports of the same type of high-quality products to meet the demanding forming and cold heading steel greatly changed the amount of carbon-based molding process. MPS03A sub-medium viscosity (150) and high viscosity (180) are two viscosity grades.
Pb values: display oil lubrication, Pd values are displayed under high temperature and pressure oil extreme pressure performance, the value of common lubricants Pb 280, Pd value is 1200.
Pb, Pd showed higher value the better the performance of oil lubricated.
Friday, July 1, 2011
MPS03A-1 cold heading oil
Effective protection of punch (red needles) and die, to extend life, reduce overall costs.
This product has good lubricity, extreme pressure anti-wear, rust resistance and high temperature oxidation security. Can effectively protect the mold, to meet the standard parts and non-standard parts forming a multi-station, the processing temperature up to 500 °C, can be fully qualified for cold heading steel workpiece.
Uses:
Cold Heading for stainless steel nuts, screws, bolt, sleeve, stainless steel hollow, empty heart rivets, etc. forming.
Technical parameters:
Test Project
Technical parameters
Test Method
Appearance
Dark brown oil
Head Measurement
Kinematic viscosity (40 °C) mm2 / s
150/180
GB/T265
Mechanical impurities
No
GB/T511 - 88
Pb-free card to bite the largest load value (N)
≥ 980
GB/T3142
Pd sintering load value (N)
≥ 7200
GB/T3142
Performance characteristics:
The value of good lubricity, extreme pressure anti-wear, processing temperatures up to 800 °C.
Larger than on the product variant has a good processing properties, such as hollow, empty heart rivets, etc.;
Effective protection of punch (red needles) and die, to extend life, reduce overall costs.
High-temperature performance, difficult to produce sludge.
Low odor, low smoke, protect the operating environment.
MPS03A cold heading oil can replace expensive imports of the same type of high-quality products to meet the demanding forming and cold heading steel greatly changed the amount of carbon-based molding process. MPS03A sub-medium viscosity (150) and high viscosity (180) are two viscosity grades.
Pb values: display oil lubrication, Pd values are displayed under high temperature and pressure oil extreme pressure performance, the value of common lubricants Pb 280, Pd value is 1200.
Pb, Pd showed higher value the better the performance of oil lubricated.
This product has good lubricity, extreme pressure anti-wear, rust resistance and high temperature oxidation security. Can effectively protect the mold, to meet the standard parts and non-standard parts forming a multi-station, the processing temperature up to 500 °C, can be fully qualified for cold heading steel workpiece.
Uses:
Cold Heading for stainless steel nuts, screws, bolt, sleeve, stainless steel hollow, empty heart rivets, etc. forming.
Technical parameters:
Test Project
Technical parameters
Test Method
Appearance
Dark brown oil
Head Measurement
Kinematic viscosity (40 °C) mm2 / s
150/180
GB/T265
Mechanical impurities
No
GB/T511 - 88
Pb-free card to bite the largest load value (N)
≥ 980
GB/T3142
Pd sintering load value (N)
≥ 7200
GB/T3142
Performance characteristics:
The value of good lubricity, extreme pressure anti-wear, processing temperatures up to 800 °C.
Larger than on the product variant has a good processing properties, such as hollow, empty heart rivets, etc.;
Effective protection of punch (red needles) and die, to extend life, reduce overall costs.
High-temperature performance, difficult to produce sludge.
Low odor, low smoke, protect the operating environment.
MPS03A cold heading oil can replace expensive imports of the same type of high-quality products to meet the demanding forming and cold heading steel greatly changed the amount of carbon-based molding process. MPS03A sub-medium viscosity (150) and high viscosity (180) are two viscosity grades.
Pb values: display oil lubrication, Pd values are displayed under high temperature and pressure oil extreme pressure performance, the value of common lubricants Pb 280, Pd value is 1200.
Pb, Pd showed higher value the better the performance of oil lubricated.
MPU Multi-performance High-temperature Lubricating Grease
MPU Multi-performance High-temperature Lubricating Grease
1high-temperature resistant
2anti-wear
3chemical stability
4Gprice
MPU Multi-performance High-temperature Lubricating Grease
Product Description
The product is formulated by using organic thickener to thicken refined mineral oil, and adding anti-wear agent, antioxidant, antirust additive and other additives. The quality of the product is in accordance with the standard of Q/AHY11-2007.
Fields of Application
The product is mainly applied to the integral lubrication of soaking furnace, steelmaking furnace, continuous casting machine, rolling mill and other high-temperature and heavy-duty mechanical equipments in metallurgical industry, also suitable for the lubrication of equipments in petroleum, chemical industry, printing and dyeing, paper making industry and other equipments working in high-temperature, contacting acid, alkali, water, and steam, and also applied to the lubrication in mining, transportation and construction machinery equipment. This product is high-performance general-purpose lubricating grease.
Applicable Temperature Range:-20-180
0
C
Performance Characteristics
² Outstanding high-temperature resistant performance, small consistency change under high-temperature, less coke is not easy to plug pipelines. Especially suitable for the lubrication of high-temperature equipments in metallurgical industry.
² good anti-wear property, stronger self-adhesion to the metal surface to prevent direct contact with the metal surface and therefore have much better anti-wear property.
² Excellent chemical stability, excellent water resistance, acid and alkali resistant properties, it will not be lost due to deterioration even at 150
0
C hydrochloric acid vapor.
² Excellent colloidal stability, stable structural, non-separation, non-hardening, with long service life.
² Lead-free, chlorine-free, is a superior multi-functional high-temperature grease.
Product Varieties
Available grease consistency numbers are 0#, 1#, and 2#.
Application Notice
According to the regulations of lubricating grease for equipments, to choose the appropriate quality level and consistency number product; the storage and transportation process must be water-proof, moisture-proof and avoid mixing mechanical impurities; anti-pollution; different quality levels of products cannot be mixed; Centralized Treatment for replaced old grease to prevent environment pollution.
Typical Data
Item
0#
1#
2#
Test Method
Appearance
Pale yellow to brown smooth ointment
Visual estimation
Worked Penetration,0.lmm
364
323
285
GB/T269
Dropping Point,
0
C
280
290
315
GB/T 3498
Oil separation (100
0
C,24h),%
4
3
2
SH/T 0324
Evaporation(99
0
,22h),%
0.5
0.4
0.4
GB/T 7325
Water Washout Losses(38
0
C,1 h ), %
-
1.8
1.5
SH/T 0109
Corrosion Preventive Property(52
0
C, 48h ),Grade
1
1
1
GB/T 5 018
Anti-wear Property(Four-ball Machine Method) (392N,60min),mm
0.45
0.45
0.45
SH/T 0204
Oxidation Stability(99
0
C,100h,0.760MPa)
Differential Pressure,Mpa
0.05
0.05
0.05
SH/T 0325
1high-temperature resistant
2anti-wear
3chemical stability
4Gprice
MPU Multi-performance High-temperature Lubricating Grease
Product Description
The product is formulated by using organic thickener to thicken refined mineral oil, and adding anti-wear agent, antioxidant, antirust additive and other additives. The quality of the product is in accordance with the standard of Q/AHY11-2007.
Fields of Application
The product is mainly applied to the integral lubrication of soaking furnace, steelmaking furnace, continuous casting machine, rolling mill and other high-temperature and heavy-duty mechanical equipments in metallurgical industry, also suitable for the lubrication of equipments in petroleum, chemical industry, printing and dyeing, paper making industry and other equipments working in high-temperature, contacting acid, alkali, water, and steam, and also applied to the lubrication in mining, transportation and construction machinery equipment. This product is high-performance general-purpose lubricating grease.
Applicable Temperature Range:-20-180
0
C
Performance Characteristics
² Outstanding high-temperature resistant performance, small consistency change under high-temperature, less coke is not easy to plug pipelines. Especially suitable for the lubrication of high-temperature equipments in metallurgical industry.
² good anti-wear property, stronger self-adhesion to the metal surface to prevent direct contact with the metal surface and therefore have much better anti-wear property.
² Excellent chemical stability, excellent water resistance, acid and alkali resistant properties, it will not be lost due to deterioration even at 150
0
C hydrochloric acid vapor.
² Excellent colloidal stability, stable structural, non-separation, non-hardening, with long service life.
² Lead-free, chlorine-free, is a superior multi-functional high-temperature grease.
Product Varieties
Available grease consistency numbers are 0#, 1#, and 2#.
Application Notice
According to the regulations of lubricating grease for equipments, to choose the appropriate quality level and consistency number product; the storage and transportation process must be water-proof, moisture-proof and avoid mixing mechanical impurities; anti-pollution; different quality levels of products cannot be mixed; Centralized Treatment for replaced old grease to prevent environment pollution.
Typical Data
Item
0#
1#
2#
Test Method
Appearance
Pale yellow to brown smooth ointment
Visual estimation
Worked Penetration,0.lmm
364
323
285
GB/T269
Dropping Point,
0
C
280
290
315
GB/T 3498
Oil separation (100
0
C,24h),%
4
3
2
SH/T 0324
Evaporation(99
0
,22h),%
0.5
0.4
0.4
GB/T 7325
Water Washout Losses(38
0
C,1 h ), %
-
1.8
1.5
SH/T 0109
Corrosion Preventive Property(52
0
C, 48h ),Grade
1
1
1
GB/T 5 018
Anti-wear Property(Four-ball Machine Method) (392N,60min),mm
0.45
0.45
0.45
SH/T 0204
Oxidation Stability(99
0
C,100h,0.760MPa)
Differential Pressure,Mpa
0.05
0.05
0.05
SH/T 0325
MPU Multi-performance High-temperature Lubricating Grease
MPU Multi-performance High-temperature
Lubricating Grease
1high-temperature resistant
2anti-wear property
3colloidal stabil
MPU Multi-performance High-temperature Lubricating Grease
Product Description
The product is formulated by using organic thickener to thicken refined mineral oil, and adding anti-wear agent, antioxidant, antirust additive and other additives. The quality of the product is in accordance with the standard of Q/AHY11-2007.
Fields of Application
The product is mainly applied to the integral lubrication of soaking furnace, steelmaking furnace, continuous casting machine, rolling mill and other high-temperature and heavy-duty mechanical equipments in metallurgical industry, also suitable for the lubrication of equipments in petroleum, chemical industry, printing and dyeing, paper making industry and other equipments working in high-temperature, contacting acid, alkali, water, and steam, and also applied to the lubrication in mining, transportation and construction machinery equipment. This product is high-performance general-purpose lubricating grease.
Applicable Temperature Range:-20-180
0
C
Performance Characteristics
² Outstanding high-temperature resistant performance, small consistency change under high-temperature, less coke is not easy to plug pipelines. Especially suitable for the lubrication of high-temperature equipments in metallurgical industry.
² good anti-wear property, stronger self-adhesion to the metal surface to prevent direct contact with the metal surface and therefore have much better anti-wear property.
² Excellent chemical stability, excellent water resistance, acid and alkali resistant properties, it will not be lost due to deterioration even at 150
0
C hydrochloric acid vapor.
² Excellent colloidal stability, stable structural, non-separation, non-hardening, with long service life.
² Lead-free, chlorine-free, is a superior multi-functional high-temperature grease.
Product Varieties
Available grease consistency numbers are 0#, 1#, and 2#.
Application Notice
According to the regulations of lubricating grease for equipments, to choose the appropriate quality level and consistency number product; the storage and transportation process must be water-proof, moisture-proof and avoid mixing mechanical impurities; anti-pollution; different quality levels of products cannot be mixed; Centralized Treatment for replaced old grease to prevent environment pollution.
Typical Data
Item
0#
1#
2#
Test Method
Appearance
Pale yellow to brown smooth ointment
Visual estimation
Worked Penetration,0.lmm
364
323
285
GB/T269
Dropping Point,
0
C
280
290
315
GB/T 3498
Oil separation (100
0
C,24h),%
4
3
2
SH/T 0324
Evaporation(99
0
,22h),%
0.5
0.4
0.4
GB/T 7325
Water Washout Losses(38
0
C,1 h ), %
-
1.8
1.5
SH/T 0109
Corrosion Preventive Property(52
0
C, 48h ),Grade
1
1
1
GB/T 5 018
Anti-wear Property(Four-ball Machine Method) (392N,60min),mm
0.45
0.45
0.45
SH/T 0204
Oxidation Stability(99
0
C,100h,0.760MPa)
Differential Pressure,Mpa
0.05
0.05
0.05
SH/T 0325
Lubricating Grease
1high-temperature resistant
2anti-wear property
3colloidal stabil
MPU Multi-performance High-temperature Lubricating Grease
Product Description
The product is formulated by using organic thickener to thicken refined mineral oil, and adding anti-wear agent, antioxidant, antirust additive and other additives. The quality of the product is in accordance with the standard of Q/AHY11-2007.
Fields of Application
The product is mainly applied to the integral lubrication of soaking furnace, steelmaking furnace, continuous casting machine, rolling mill and other high-temperature and heavy-duty mechanical equipments in metallurgical industry, also suitable for the lubrication of equipments in petroleum, chemical industry, printing and dyeing, paper making industry and other equipments working in high-temperature, contacting acid, alkali, water, and steam, and also applied to the lubrication in mining, transportation and construction machinery equipment. This product is high-performance general-purpose lubricating grease.
Applicable Temperature Range:-20-180
0
C
Performance Characteristics
² Outstanding high-temperature resistant performance, small consistency change under high-temperature, less coke is not easy to plug pipelines. Especially suitable for the lubrication of high-temperature equipments in metallurgical industry.
² good anti-wear property, stronger self-adhesion to the metal surface to prevent direct contact with the metal surface and therefore have much better anti-wear property.
² Excellent chemical stability, excellent water resistance, acid and alkali resistant properties, it will not be lost due to deterioration even at 150
0
C hydrochloric acid vapor.
² Excellent colloidal stability, stable structural, non-separation, non-hardening, with long service life.
² Lead-free, chlorine-free, is a superior multi-functional high-temperature grease.
Product Varieties
Available grease consistency numbers are 0#, 1#, and 2#.
Application Notice
According to the regulations of lubricating grease for equipments, to choose the appropriate quality level and consistency number product; the storage and transportation process must be water-proof, moisture-proof and avoid mixing mechanical impurities; anti-pollution; different quality levels of products cannot be mixed; Centralized Treatment for replaced old grease to prevent environment pollution.
Typical Data
Item
0#
1#
2#
Test Method
Appearance
Pale yellow to brown smooth ointment
Visual estimation
Worked Penetration,0.lmm
364
323
285
GB/T269
Dropping Point,
0
C
280
290
315
GB/T 3498
Oil separation (100
0
C,24h),%
4
3
2
SH/T 0324
Evaporation(99
0
,22h),%
0.5
0.4
0.4
GB/T 7325
Water Washout Losses(38
0
C,1 h ), %
-
1.8
1.5
SH/T 0109
Corrosion Preventive Property(52
0
C, 48h ),Grade
1
1
1
GB/T 5 018
Anti-wear Property(Four-ball Machine Method) (392N,60min),mm
0.45
0.45
0.45
SH/T 0204
Oxidation Stability(99
0
C,100h,0.760MPa)
Differential Pressure,Mpa
0.05
0.05
0.05
SH/T 0325
Machinary maintaining agent
1)Save power 5%-30%,lubricant 50%;
2)Improving resisting pressure and load capacity of lubricating oil;
3)repair dynnamically
The instruction of Dunba Energy Saving & Maintaining additives
for heavy equipment
1.Discription
Dunba Power Saving & Maintaining addtives for oil for heavy equipment is a power saving and environmental friendly products as compound of Nano Metal Particle,polymer,and multifunctional additives,which is made of the newest technological fruit prduced by"national 863 plan".We have the intellectual property rights(Patent No. ZL200810032849.1).It has not only function of
super lubricating,selfrepairing but also of good antioxidation,and good antifriction.
2.Characteristic
1)
Save power 5%-30%,lubricant 50%;
2)Improving the resisting pressure and load capacity of lubricating oil, reducing impact load, and assure the minimum friction;
3)repair attrition dynamically,maitain equipment,reduce repair cost of the equipment effectively;
4)antiwear,reduce friction,reduce shake,cooling,reduce noise,improve efficiency,prolong the service lfe of equipment;
5)Mixed in virous lubricants,not changing the performance of lubricating oil,extend the period of changing oil;
6)Clean oil dirt,prevent malfunction,reduce mechanical accident;
7)The usage is simple and convenient,no damage for the construction of equipment.
3,Technical Characteristic
1)This product is produced by organic and inorganic nano materials, not only possessing the function of strong lubricating & resisting extreme pressure of organic material, but also having intelligent self-repair performance of inorganic nano material. In the process of friction, the nano particle is induced by the friction heat, rapidly penetrating into the micro defect on the surface of metal friction, quickly repairing uneven friction surface, and forming extra smooth,high hardness friction surface, not only reducing the friction coefficient, but also improving the performance of extreme pressure and anti-wear, thereby achieving the effect of power saving ,noise reduction and extending service life.
2)Stable performance,anti-oxidation,excellent dispersivity, mixed with any lubricating oil, no damage for the human body, environmental product.
3)Maintaining the equipment under extreme pressure, make the minimum friction.
Metal Friction surface comparison after and before using Dunba
(after) (before)
4.Application
This product is stable in various lubricants,is suitable for power-saving and maintainance of midium and small equipment in the fields of spinning,papermaking,chemical industry.
5,Usage Instruction
Add mixed product to lubrication system, normal usage is about 1%-3% of the total lubricating oil. If you have any problem, please consult the manufacturer.
6,Notice
1)Keep in normal temperature and avoid sunlight
2)Protect from impurity and water
3)Don’t drink and avoid skin contact for long time
2)Improving resisting pressure and load capacity of lubricating oil;
3)repair dynnamically
The instruction of Dunba Energy Saving & Maintaining additives
for heavy equipment
1.Discription
Dunba Power Saving & Maintaining addtives for oil for heavy equipment is a power saving and environmental friendly products as compound of Nano Metal Particle,polymer,and multifunctional additives,which is made of the newest technological fruit prduced by"national 863 plan".We have the intellectual property rights(Patent No. ZL200810032849.1).It has not only function of
super lubricating,selfrepairing but also of good antioxidation,and good antifriction.
2.Characteristic
1)
Save power 5%-30%,lubricant 50%;
2)Improving the resisting pressure and load capacity of lubricating oil, reducing impact load, and assure the minimum friction;
3)repair attrition dynamically,maitain equipment,reduce repair cost of the equipment effectively;
4)antiwear,reduce friction,reduce shake,cooling,reduce noise,improve efficiency,prolong the service lfe of equipment;
5)Mixed in virous lubricants,not changing the performance of lubricating oil,extend the period of changing oil;
6)Clean oil dirt,prevent malfunction,reduce mechanical accident;
7)The usage is simple and convenient,no damage for the construction of equipment.
3,Technical Characteristic
1)This product is produced by organic and inorganic nano materials, not only possessing the function of strong lubricating & resisting extreme pressure of organic material, but also having intelligent self-repair performance of inorganic nano material. In the process of friction, the nano particle is induced by the friction heat, rapidly penetrating into the micro defect on the surface of metal friction, quickly repairing uneven friction surface, and forming extra smooth,high hardness friction surface, not only reducing the friction coefficient, but also improving the performance of extreme pressure and anti-wear, thereby achieving the effect of power saving ,noise reduction and extending service life.
2)Stable performance,anti-oxidation,excellent dispersivity, mixed with any lubricating oil, no damage for the human body, environmental product.
3)Maintaining the equipment under extreme pressure, make the minimum friction.
Metal Friction surface comparison after and before using Dunba
(after) (before)
4.Application
This product is stable in various lubricants,is suitable for power-saving and maintainance of midium and small equipment in the fields of spinning,papermaking,chemical industry.
5,Usage Instruction
Add mixed product to lubrication system, normal usage is about 1%-3% of the total lubricating oil. If you have any problem, please consult the manufacturer.
6,Notice
1)Keep in normal temperature and avoid sunlight
2)Protect from impurity and water
3)Don’t drink and avoid skin contact for long time
Machinary maintaining fluid
1)Save power 5%-30%,lubricant 50%;
2)Improving resisting pressure and load capacity of lubricating oil;
3)repair dynnamically
The instruction of Dunba Energy Saving & Maintaining additives
for heavy equipment
1.Discription
Dunba Power Saving & Maintaining addtives for oil for heavy equipment is a power saving and environmental friendly products as compound of Nano Metal Particle,polymer,and multifunctional additives,which is made of the newest technological fruit prduced by"national 863 plan".We have the intellectual property rights(Patent No. ZL200810032849.1).It has not only function of
super lubricating,selfrepairing but also of good antioxidation,and good antifriction.
2.Characteristic
1)
Save power 5%-30%,lubricant 50%;
2)Improving the resisting pressure and load capacity of lubricating oil, reducing impact load, and assure the minimum friction;
3)repair attrition dynamically,maitain equipment,reduce repair cost of the equipment effectively;
4)antiwear,reduce friction,reduce shake,cooling,reduce noise,improve efficiency,prolong the service lfe of equipment;
5)Mixed in virous lubricants,not changing the performance of lubricating oil,extend the period of changing oil;
6)Clean oil dirt,prevent malfunction,reduce mechanical accident;
7)The usage is simple and convenient,no damage for the construction of equipment.
3,Technical Characteristic
1)This product is produced by organic and inorganic nano materials, not only possessing the function of strong lubricating & resisting extreme pressure of organic material, but also having intelligent self-repair performance of inorganic nano material. In the process of friction, the nano particle is induced by the friction heat, rapidly penetrating into the micro defect on the surface of metal friction, quickly repairing uneven friction surface, and forming extra smooth,high hardness friction surface, not only reducing the friction coefficient, but also improving the performance of extreme pressure and anti-wear, thereby achieving the effect of power saving ,noise reduction and extending service life.
2)Stable performance,anti-oxidation,excellent dispersivity, mixed with any lubricating oil, no damage for the human body, environmental product.
3)Maintaining the equipment under extreme pressure, make the minimum friction.
Metal Friction surface comparison after and before using Dunba
(after) (before)
4.Application
This product is stable in various lubricants,is suitable for power-saving and maintainance of midium and small equipment in the fields of spinning,papermaking,chemical industry.
5,Usage Instruction
Add mixed product to lubrication system, normal usage is about 1%-3% of the total lubricating oil. If you have any problem, please consult the manufacturer.
6,Notice
1)Keep in normal temperature and avoid sunlight
2)Protect from impurity and water
3)Don’t drink and avoid skin contact for long time
2)Improving resisting pressure and load capacity of lubricating oil;
3)repair dynnamically
The instruction of Dunba Energy Saving & Maintaining additives
for heavy equipment
1.Discription
Dunba Power Saving & Maintaining addtives for oil for heavy equipment is a power saving and environmental friendly products as compound of Nano Metal Particle,polymer,and multifunctional additives,which is made of the newest technological fruit prduced by"national 863 plan".We have the intellectual property rights(Patent No. ZL200810032849.1).It has not only function of
super lubricating,selfrepairing but also of good antioxidation,and good antifriction.
2.Characteristic
1)
Save power 5%-30%,lubricant 50%;
2)Improving the resisting pressure and load capacity of lubricating oil, reducing impact load, and assure the minimum friction;
3)repair attrition dynamically,maitain equipment,reduce repair cost of the equipment effectively;
4)antiwear,reduce friction,reduce shake,cooling,reduce noise,improve efficiency,prolong the service lfe of equipment;
5)Mixed in virous lubricants,not changing the performance of lubricating oil,extend the period of changing oil;
6)Clean oil dirt,prevent malfunction,reduce mechanical accident;
7)The usage is simple and convenient,no damage for the construction of equipment.
3,Technical Characteristic
1)This product is produced by organic and inorganic nano materials, not only possessing the function of strong lubricating & resisting extreme pressure of organic material, but also having intelligent self-repair performance of inorganic nano material. In the process of friction, the nano particle is induced by the friction heat, rapidly penetrating into the micro defect on the surface of metal friction, quickly repairing uneven friction surface, and forming extra smooth,high hardness friction surface, not only reducing the friction coefficient, but also improving the performance of extreme pressure and anti-wear, thereby achieving the effect of power saving ,noise reduction and extending service life.
2)Stable performance,anti-oxidation,excellent dispersivity, mixed with any lubricating oil, no damage for the human body, environmental product.
3)Maintaining the equipment under extreme pressure, make the minimum friction.
Metal Friction surface comparison after and before using Dunba
(after) (before)
4.Application
This product is stable in various lubricants,is suitable for power-saving and maintainance of midium and small equipment in the fields of spinning,papermaking,chemical industry.
5,Usage Instruction
Add mixed product to lubrication system, normal usage is about 1%-3% of the total lubricating oil. If you have any problem, please consult the manufacturer.
6,Notice
1)Keep in normal temperature and avoid sunlight
2)Protect from impurity and water
3)Don’t drink and avoid skin contact for long time
Machine & Mould Cleaner Oil Remover II
Machine & Mould Cleaner Oil Remover II
-quick dry
-no harmful to machine
-oil quickly remove
Machine & Mould Cleaner Oil Remover II
Description
Fukkol Mould Cleaner 2 is a unique blend of petroleum-distillates and alcohol which provides a suitable precision cleaner for sensitive electronics and electrical equipment. It is a cost effective alternative to all contact cleaners. It evaporates quickly and leaves no residue and is safe to use on all plastics.
Application
FUKKOL MC effctively removes dirt, dust. light oils and fingerprints from contacts, printed circuit boards, switches, telephones, PCs, motors, relayS, generators, edge, connectors, tape heads, buss bars, circuit breakers and more
-quick dry
-no harmful to machine
-oil quickly remove
Machine & Mould Cleaner Oil Remover II
Description
Fukkol Mould Cleaner 2 is a unique blend of petroleum-distillates and alcohol which provides a suitable precision cleaner for sensitive electronics and electrical equipment. It is a cost effective alternative to all contact cleaners. It evaporates quickly and leaves no residue and is safe to use on all plastics.
Application
FUKKOL MC effctively removes dirt, dust. light oils and fingerprints from contacts, printed circuit boards, switches, telephones, PCs, motors, relayS, generators, edge, connectors, tape heads, buss bars, circuit breakers and more
64 HOT fully refined paraffin wax
1.kunlun brand
2.quality index:prior class
3.Application:candles making\rubber industry\explosives industry
4.M.P:64-66
Test Items
Standard
Test Method
Melting point
64-66
GB/T 2539
Oil Content %(m/m) ≤
0.5
GB/T 3554
Color saybolt ≥
+25
GB/T 3555
Light Stability # ≤
5
SH/T0404
Penetration (25°C)1/10mm ≤
16
GB/T 4985
We supply Kunlun brand semi refined and fully refined paraffin wax purchased directly from PetroChina, with melting points of 54/56, 56/58, 58/60, 60/62, 62/64, 64/66 and others. Our factory produces industrial grade semi-refined paraffin wax. The annual trade volume amounts 20,000MT.
Management Certification: ISO 9001:2000
2.quality index:prior class
3.Application:candles making\rubber industry\explosives industry
4.M.P:64-66
Test Items
Standard
Test Method
Melting point
64-66
GB/T 2539
Oil Content %(m/m) ≤
0.5
GB/T 3554
Color saybolt ≥
+25
GB/T 3555
Light Stability # ≤
5
SH/T0404
Penetration (25°C)1/10mm ≤
16
GB/T 4985
We supply Kunlun brand semi refined and fully refined paraffin wax purchased directly from PetroChina, with melting points of 54/56, 56/58, 58/60, 60/62, 62/64, 64/66 and others. Our factory produces industrial grade semi-refined paraffin wax. The annual trade volume amounts 20,000MT.
Management Certification: ISO 9001:2000
Machine Cleaning Aerosol for kyosho rc model
Machine Cleaning Aerosol for kyosho rc model
No benzene solvent nor hydrochloric
Toxic-free and environmental-friendly
Machine Cleaning Aerosol for kyosho rc model
Machine Cleaning Aerosol has been formulated using top secret methods and techniques this pressurized liquid will clean bearings, electric and nitro motors as well as any other dirty objects with disgust and haste.
It is safe with plastics and short time contact will not irritate the skin or rubber parts.
No benzene solvent nor hydrochloric
Toxic-free and environmental-friendly
Machine Cleaning Aerosol for kyosho rc model
Machine Cleaning Aerosol has been formulated using top secret methods and techniques this pressurized liquid will clean bearings, electric and nitro motors as well as any other dirty objects with disgust and haste.
It is safe with plastics and short time contact will not irritate the skin or rubber parts.
Machine Cleaning Aerosol for rc car
Machine Cleaning Aerosol for rc car
No benzene solvent nor hydrochloric
Toxic-free and environmental-friendly
High insolvency
Machine Cleaning Aerosol for rc car
Machine Cleaning Aerosol has been formulated using top secret methods and techniques this pressurized liquid will clean bearings, electric and nitro motors as well as any other dirty objects with disgust and haste.
It is safe with plastics and short time contact will not irritate the skin or rubber parts.
No benzene solvent nor hydrochloric
Toxic-free and environmental-friendly
High insolvency
Machine Cleaning Aerosol for rc car
Machine Cleaning Aerosol has been formulated using top secret methods and techniques this pressurized liquid will clean bearings, electric and nitro motors as well as any other dirty objects with disgust and haste.
It is safe with plastics and short time contact will not irritate the skin or rubber parts.
Machine Cleaning Aerosol
Machine Cleaning Aerosol
No benzene solvent nor hydrochloric
Toxic-free and environmental-friendly
High insolvency
Machine Cleaning Aerosol
Machine Cleaning Aerosol has been formulated using top secret methods and techniques this pressurized liquid will clean bearings, electric and nitro motors as well as any other dirty objects with disgust and haste.
It is safe with plastics and short time contact will not irritate the skin or rubber parts.
No benzene solvent nor hydrochloric
Toxic-free and environmental-friendly
High insolvency
Machine Cleaning Aerosol
Machine Cleaning Aerosol has been formulated using top secret methods and techniques this pressurized liquid will clean bearings, electric and nitro motors as well as any other dirty objects with disgust and haste.
It is safe with plastics and short time contact will not irritate the skin or rubber parts.
Machine Cleasing Aerosol
Machine Cleasing Aerosol
No benzene solvent nor hydrochloric
Toxic-free and environmental-friendly
High insolvency
Machine Cleasing Aerosol has been formulated using top secret methods and techniques this pressurized liquid will clean bearings, electric and nitro motors as well as any other dirty objects with disgust and haste.
It is safe with plastics and short time contact will not irritate the skin or rubber parts.
No benzene solvent nor hydrochloric
Toxic-free and environmental-friendly
High insolvency
Machine Cleasing Aerosol has been formulated using top secret methods and techniques this pressurized liquid will clean bearings, electric and nitro motors as well as any other dirty objects with disgust and haste.
It is safe with plastics and short time contact will not irritate the skin or rubber parts.
Machine Part Dust Removing Clay
Machine Part Dust Removing Clay
Recyclable
Toxic-free
Machine Part Dust Removing Clay simply picks up all the dirt and dust your car has collected on the track. The clay even absorbes oil and grease!
Recyclable
Toxic-free
Machine Part Dust Removing Clay simply picks up all the dirt and dust your car has collected on the track. The clay even absorbes oil and grease!
Machine maintenance spray lubricant
SPRAYVAN 090 Machine maintenance spray lubricant
Film coating keeps moving parts and operating mechanisms running smoothly.
SPRAYVAN 090 Machine maintenance spray lubricant
spray lubricant,spray lubricant and penetrating oil,machine lubricant grease
Versatile enough for use on automotive and marine equipment, household items, hardware, tools, printing presses, sewing machines.
Film coating keeps moving parts and operating mechanisms running smoothly.
Prevents rust; displaces moisture.
Acts as quick-release agent on corroded or *rozen*arts.
Contains no silicone.
Film coating keeps moving parts and operating mechanisms running smoothly.
SPRAYVAN 090 Machine maintenance spray lubricant
spray lubricant,spray lubricant and penetrating oil,machine lubricant grease
Versatile enough for use on automotive and marine equipment, household items, hardware, tools, printing presses, sewing machines.
Film coating keeps moving parts and operating mechanisms running smoothly.
Prevents rust; displaces moisture.
Acts as quick-release agent on corroded or *rozen*arts.
Contains no silicone.
Machinery Slide Way Spray
*Very good resistance to oxidation.
*Very good anti-rust protection.
*Vety good anti-wear protection.
Product Information
*Machine tools slide ways under all conditions of speed and load .
*Particularly suitable for centralized lubrication systems.
*One wide range of lubricating products for all parts of machine tools (hydraulic, slides, gears).
*Desihned for use in steel/steel&cast iron slideways.
*Also be used in hydraulic system of machine tools having same slideways & hydraulic lubrication system.
*For use plastic PIN.
Virtue
*High quality oils of good oxidation stability in-orporating oiliness , antiwear & tackiness addit-ives which impart the frictional characteristics necessary to prevent′stick-slip′in the opera-tions of tableways & slideways of machine tools.
*Protects exposed machine tools parts from c-orrosion.
*Perfect neutrality with respect to oil seals.
*Excellent demulsibility.
*Very good resistance to oxidation.
*Very good anti-rust protection.
*Vety good anti-wear protection.
*Very good anti-rust protection.
*Vety good anti-wear protection.
Product Information
*Machine tools slide ways under all conditions of speed and load .
*Particularly suitable for centralized lubrication systems.
*One wide range of lubricating products for all parts of machine tools (hydraulic, slides, gears).
*Desihned for use in steel/steel&cast iron slideways.
*Also be used in hydraulic system of machine tools having same slideways & hydraulic lubrication system.
*For use plastic PIN.
Virtue
*High quality oils of good oxidation stability in-orporating oiliness , antiwear & tackiness addit-ives which impart the frictional characteristics necessary to prevent′stick-slip′in the opera-tions of tableways & slideways of machine tools.
*Protects exposed machine tools parts from c-orrosion.
*Perfect neutrality with respect to oil seals.
*Excellent demulsibility.
*Very good resistance to oxidation.
*Very good anti-rust protection.
*Vety good anti-wear protection.
Magnesium salt ascorbic acid phosphate
Magnesium salt ascorbic acid phosphate
Magnesium salt ascorbic acid phosphate
Magnesium salt ascorbic acid phosphate
Maintenance fluid
Maintenance fluid
1.Save fuel & lub-oil
2.Reduce emission
3.Protect engine
4.Highly protect invironment
Dunba Automotive Lubricant Nano Additives for Limousine is a fuel-saving and environmental solution. It is produced by technical equipment with intellectual property rights, using Nano-alloy particles, Nano-polymer and multifunctional additives.
(Patent No. ZL200810032849.1)
Mixed different nano lubricant additives in the lubrication oil after 24 hours,
please see the comparison picture:
Hot sale nano lubricant additives
Dunba Nano luricant additives
Four Major Features
Fast:
engine working environment improved, noise and vibration reduced, and power enhanced in 15 minutes.
Powerful:
triple protection including inner reinforced, surface repaired and outer wear proofed by Nano-particles.
Environmental:
reduce exhaust particles and smoke emissions.
No side effects:
it is suitable for long-term use of various cars, without any adverse effects or side effects.
Nine Major Functions
Engine protection:
triple protection to ensure that the engine is powerful in any condition.
Scuffing reduction:
80%-90% reductions in engine wear and tear; still provide superior protection under the conditions of lubrication system failure or non-oil.
Fast start:
superior lubrication function can significantly reduce the friction coefficient and improve the initial rotation speed.
Auto repair:
wear and tear repaired dynamically, engine life extended 2-3 times.
Noise reduction:
effectively reduce engine noise and vibration.
Corrosion prevention:
prevent friction parts from corrosive pitting.
Power strengthening:
restore the engine cylinder pressure. Power increase by 5%-35%.
Fuel saving:
5%-25% consumption saved.
Environmentally friendly:
improve oil burning, blue smoke and other conditions, to reduce exhaust particles by 20%-30% and smoke emissions by 50%.
Two Major Breakthroughs
Auto repaired:
put engine maintenance into practice by auto repaired using Nano-particles.
Four in one:
maintaining, repairing,anti-wear and fuel-saving simultaneously.
Application
The product can be easily and stably dispersed in all kinds of lubrication fluid. The main effect of this product is wear-proofing, repairing and fuel-saving. The product is suitable for all kinds of cars power and transmission systems.
How to use
Add the fluid to lubricating oil, keep the engine ticking over around 2 minutes, and start driving after mixing. Normal usage of this product is about 3.5% of the total lubricating oil, in other words, please mix 4 liters of lubricating oil with one bottle (150 grams) of DBDS-012.
1.Save fuel & lub-oil
2.Reduce emission
3.Protect engine
4.Highly protect invironment
Dunba Automotive Lubricant Nano Additives for Limousine is a fuel-saving and environmental solution. It is produced by technical equipment with intellectual property rights, using Nano-alloy particles, Nano-polymer and multifunctional additives.
(Patent No. ZL200810032849.1)
Mixed different nano lubricant additives in the lubrication oil after 24 hours,
please see the comparison picture:
Hot sale nano lubricant additives
Dunba Nano luricant additives
Four Major Features
Fast:
engine working environment improved, noise and vibration reduced, and power enhanced in 15 minutes.
Powerful:
triple protection including inner reinforced, surface repaired and outer wear proofed by Nano-particles.
Environmental:
reduce exhaust particles and smoke emissions.
No side effects:
it is suitable for long-term use of various cars, without any adverse effects or side effects.
Nine Major Functions
Engine protection:
triple protection to ensure that the engine is powerful in any condition.
Scuffing reduction:
80%-90% reductions in engine wear and tear; still provide superior protection under the conditions of lubrication system failure or non-oil.
Fast start:
superior lubrication function can significantly reduce the friction coefficient and improve the initial rotation speed.
Auto repair:
wear and tear repaired dynamically, engine life extended 2-3 times.
Noise reduction:
effectively reduce engine noise and vibration.
Corrosion prevention:
prevent friction parts from corrosive pitting.
Power strengthening:
restore the engine cylinder pressure. Power increase by 5%-35%.
Fuel saving:
5%-25% consumption saved.
Environmentally friendly:
improve oil burning, blue smoke and other conditions, to reduce exhaust particles by 20%-30% and smoke emissions by 50%.
Two Major Breakthroughs
Auto repaired:
put engine maintenance into practice by auto repaired using Nano-particles.
Four in one:
maintaining, repairing,anti-wear and fuel-saving simultaneously.
Application
The product can be easily and stably dispersed in all kinds of lubrication fluid. The main effect of this product is wear-proofing, repairing and fuel-saving. The product is suitable for all kinds of cars power and transmission systems.
How to use
Add the fluid to lubricating oil, keep the engine ticking over around 2 minutes, and start driving after mixing. Normal usage of this product is about 3.5% of the total lubricating oil, in other words, please mix 4 liters of lubricating oil with one bottle (150 grams) of DBDS-012.
Maintenance treatment additives
Maintenance treatment additives,
Greater fuel efficiency,
Extended service life,
Minimum maintenance,
Saving has become a kind of international fashion!
Feartures:
1.cleans and lubricates injectors
2.lubricants pump
3.supplements dispersancy of engine oil
4.Dispersancy of insolube gum which can occur during fuel storage
5.protect against corrosion
6.low temperature flow improvement
7.Greater fuel efficiency
8.Extended service life
9.Minimum maintenance
10.Maximum power
11.Minimum emissions
12.Operational dependability
DUNBA PRODUCTS AND TRADITIONAL LUBRICANT ADDITIVES COMPARISON ADDED IN THE SAME LUBRICANT
DUNBA ADDITIVES TRADITIONAL ADDITIVES
Application:
one part DUNBA DBDS-021 oil saving & maintenance additives to 200 parts lubricant oil.(1:200)
Greater fuel efficiency,
Extended service life,
Minimum maintenance,
Saving has become a kind of international fashion!
Feartures:
1.cleans and lubricates injectors
2.lubricants pump
3.supplements dispersancy of engine oil
4.Dispersancy of insolube gum which can occur during fuel storage
5.protect against corrosion
6.low temperature flow improvement
7.Greater fuel efficiency
8.Extended service life
9.Minimum maintenance
10.Maximum power
11.Minimum emissions
12.Operational dependability
DUNBA PRODUCTS AND TRADITIONAL LUBRICANT ADDITIVES COMPARISON ADDED IN THE SAME LUBRICANT
DUNBA ADDITIVES TRADITIONAL ADDITIVES
Application:
one part DUNBA DBDS-021 oil saving & maintenance additives to 200 parts lubricant oil.(1:200)
64 fully refined paraffin wax
we are one of the famous exporter in china.we produce 56-70 degree fully paraffin wax.we provide the goods of kunlun.
Product: 64 Fully Refined Paraffin Wax
Specification: Melting point: 64-66 Degree C
Color: 28-30
Oil content: 0.5%
Brand: kunlun
Product: 64 Fully Refined Paraffin Wax
Specification: Melting point: 64-66 Degree C
Color: 28-30
Oil content: 0.5%
Brand: kunlun
Manual Transmission Oil
SINOPEC Manual Transmission Lubricant is formulated from synthetic base stocks that contributes to the products.
Features and Benefits
· Formulated with synthetic base stocks for providing the same service life of oil with transmission
· High viscosity index, all climates available
· Demonstrates through Volkswagon Company tests with outstanding oil-rubber seal compatibility, transmission synchronism, and anti-shear properties
Recommended Applications
· Suitable for manual transmission lubrication of cars
· Approved by Volkswagon company as special factory fill transmission oil
Technical specification
Meet or exceed the following performance specification:
· Volkswagen VW501.50
Typical Properties
Items
75W/90
Viscosity@100ºC,cSt
13.5~<24.0
Brookfield Viscosity,mPa.s max
15000(-40ºC)
Copper Corrosion(121ºC,3h) max
2a
Solidifying Point(ºC) max
-45
Features and Benefits
· Formulated with synthetic base stocks for providing the same service life of oil with transmission
· High viscosity index, all climates available
· Demonstrates through Volkswagon Company tests with outstanding oil-rubber seal compatibility, transmission synchronism, and anti-shear properties
Recommended Applications
· Suitable for manual transmission lubrication of cars
· Approved by Volkswagon company as special factory fill transmission oil
Technical specification
Meet or exceed the following performance specification:
· Volkswagen VW501.50
Typical Properties
Items
75W/90
Viscosity@100ºC,cSt
13.5~<24.0
Brookfield Viscosity,mPa.s max
15000(-40ºC)
Copper Corrosion(121ºC,3h) max
2a
Solidifying Point(ºC) max
-45
Manual oil dispensers
1)Oil dispensers are normally used for filling or topping-up engine,gearbox,differential,etc
2)Max.oil density delivered:SAE240
Manual oil dispenser
Detailed Description
1.Hand-operated oil dispenser with wheel-mounted 24 litre tank,equipped with level gauge.
2.Oil dispensers with hand-operated double-action pump suitable for high-viscositydensity oils.
3.These oil dispensers are normally used for filling or topping-up engine,gearbox,differential,etc.
Technique Date
Model number
32024A
Tank capacity
24L
Structure
wheel-mounted
Delivery hose length
1.5m
Quantity delivered for complete cycle of the lever
220g
Max.oil density delivered
SAE 240
2)Max.oil density delivered:SAE240
Manual oil dispenser
Detailed Description
1.Hand-operated oil dispenser with wheel-mounted 24 litre tank,equipped with level gauge.
2.Oil dispensers with hand-operated double-action pump suitable for high-viscositydensity oils.
3.These oil dispensers are normally used for filling or topping-up engine,gearbox,differential,etc.
Technique Date
Model number
32024A
Tank capacity
24L
Structure
wheel-mounted
Delivery hose length
1.5m
Quantity delivered for complete cycle of the lever
220g
Max.oil density delivered
SAE 240
Manufacture Chlorinated paraffin wax 50,60,70
Chlorinated paraffin wax
1. PVC products
2.dditives for rubber products
3.coolant of lubricating oil, painting etc.
Appearance
: Light yellowish grease and thick liquid, with a bit irritating odor, non—combustion, non—explosive, not soluble to water, but soluble to such solvents as light oil, benzene, dimethylbenzene etc.
Technical Index
Name
Product Index
Molecular formula
C
25
H
30
CL
22
Appearance
white powder
Average molecular weight
1060-1100
Melting point
95~120 degree
Index of hot stability
≤0.2-0.3
Specific gravity
1.6-1.7
Hot decomposition temperature
180
Chlorinity content
72±2
Heat distortion point(degree
)
≥90-120
Heating loss
≤1.0
Application Field
Chlorinating paraffin (70%) has insipidity and good chemical stability. It dissolves in mineral oil, aromatic hydrocarbon, chloralkane,etc. It can be widely used in PVC, polyethylene,etc.
Packing(20”FCL) with pallet
10mts
Packing(20”FCL) without pallet
18mts
Application
: Since its freezing point reaches --30°C, Chlorinated Paraffin –42, therefore, can be used as anti—freezing agent and anti—EP (extreme pressure) additive of the lubricant. It can also be used as plastifier—aid for PVC products. (aid amount ≤25% of total amount of plastifier) Moreover, it can be used as additives for rubber products, coolant of lubricating oil, painting etc.
1. PVC products
2.dditives for rubber products
3.coolant of lubricating oil, painting etc.
Appearance
: Light yellowish grease and thick liquid, with a bit irritating odor, non—combustion, non—explosive, not soluble to water, but soluble to such solvents as light oil, benzene, dimethylbenzene etc.
Technical Index
Name
Product Index
Molecular formula
C
25
H
30
CL
22
Appearance
white powder
Average molecular weight
1060-1100
Melting point
95~120 degree
Index of hot stability
≤0.2-0.3
Specific gravity
1.6-1.7
Hot decomposition temperature
180
Chlorinity content
72±2
Heat distortion point(degree
)
≥90-120
Heating loss
≤1.0
Application Field
Chlorinating paraffin (70%) has insipidity and good chemical stability. It dissolves in mineral oil, aromatic hydrocarbon, chloralkane,etc. It can be widely used in PVC, polyethylene,etc.
Packing(20”FCL) with pallet
10mts
Packing(20”FCL) without pallet
18mts
Application
: Since its freezing point reaches --30°C, Chlorinated Paraffin –42, therefore, can be used as anti—freezing agent and anti—EP (extreme pressure) additive of the lubricant. It can also be used as plastifier—aid for PVC products. (aid amount ≤25% of total amount of plastifier) Moreover, it can be used as additives for rubber products, coolant of lubricating oil, painting etc.
Manufacture Fully Refined Paraffin Wax 58/60
Production Method:solvent deoiling and hydrorefining
Typical Specification:
Analyzing items
Standard
Method
Melting Point
58-60
GB/T 2539
Oil Content Wt%
0.8 Max
GB/T 3554
Color (saybolt)
+27 Min
GB/T 3555
Light stability
4 Max
SH/T 0404
Needle penetration(25°C)1/10mm
19 Max
GB/T 4985
Kinematic viscosity (100°C) mm2/s
Report
GB/T 265
Odor
1Max
SH/T 0414
Acid and Alkali with Water solubility
Negative
SH/T 0407
Mechanical Impurity and Water
Negative
Observing
We are capable of providing you big quantity product with reasonable price and quality service on long term bases. If you are interested in our products, please feel free to contact us.
Typical Specification:
Analyzing items
Standard
Method
Melting Point
58-60
GB/T 2539
Oil Content Wt%
0.8 Max
GB/T 3554
Color (saybolt)
+27 Min
GB/T 3555
Light stability
4 Max
SH/T 0404
Needle penetration(25°C)1/10mm
19 Max
GB/T 4985
Kinematic viscosity (100°C) mm2/s
Report
GB/T 265
Odor
1Max
SH/T 0414
Acid and Alkali with Water solubility
Negative
SH/T 0407
Mechanical Impurity and Water
Negative
Observing
We are capable of providing you big quantity product with reasonable price and quality service on long term bases. If you are interested in our products, please feel free to contact us.
Manufacturer Paraffin Wax (fully refined/semi refined)
1.High quality and professional services
2.T/T or L/C payment terms
3.Timely delivery
4.Melting points: 54~64
1. Melting points: 54, 56, 58, 60, 62, 64
2. Specification:
Fully refined Paraffin Wax:
Project
54#
56#
58#
60#
62#
64#
Melting Point
54-56°C
56-58°C
58-60°C
60-62°C
62-64°C
64-66°C
Oil content %(m/m)
≤0.5
≤0.5
≤0.5
≤0.5
≤0.5
≤0.5
Penetration number(25°C) 1/10mm
≤18
≤18
≤18
≤16
≤16
≤16
Color(white)
≥+28
≥+28
≥+28
≥+25
≥+25
≥+25
Light stability
≤4
≤4
≤4
≤5
≤5
≤5
Smell
No
No
No
No
No
No
Semi refined Paraffin Wax:
Project
54#
56#
58#
60#
62#
64#
Melting Point
54-56°C
56-58°C
58-60°C
60-62°C
62-64°C
64-66°C
Oil content %(m/m)
≤1.8
≤1.8
≤1.8
≤1.8
≤1.8
≤1.8
Penetration number(25°C) 1/10mm
≤23
≤23
≤23
≤23
≤23
≤23
Color(white)
≥+17
≥+17
≥+17
≥+17
≥+17
≥+17
Light stability
≤6
≤7
≤7
≤7
≤7
≤7
Smell
No
No
No
No
No
No
3. Application
Candle Making, Plastic, Pvc, Rubber, Density Board Production, Crayon, Package,
Waterproof Material Production, Lube, Polishing, Coating, Sealing, Adhesive,
Color Masterbatch, etc.
4. Storage
It should be stored in a cool, well-ventilated area, away from fire and heat sources.
5. Package
25kgs/ woven bag 20MT/20'FCL
2.T/T or L/C payment terms
3.Timely delivery
4.Melting points: 54~64
1. Melting points: 54, 56, 58, 60, 62, 64
2. Specification:
Fully refined Paraffin Wax:
Project
54#
56#
58#
60#
62#
64#
Melting Point
54-56°C
56-58°C
58-60°C
60-62°C
62-64°C
64-66°C
Oil content %(m/m)
≤0.5
≤0.5
≤0.5
≤0.5
≤0.5
≤0.5
Penetration number(25°C) 1/10mm
≤18
≤18
≤18
≤16
≤16
≤16
Color(white)
≥+28
≥+28
≥+28
≥+25
≥+25
≥+25
Light stability
≤4
≤4
≤4
≤5
≤5
≤5
Smell
No
No
No
No
No
No
Semi refined Paraffin Wax:
Project
54#
56#
58#
60#
62#
64#
Melting Point
54-56°C
56-58°C
58-60°C
60-62°C
62-64°C
64-66°C
Oil content %(m/m)
≤1.8
≤1.8
≤1.8
≤1.8
≤1.8
≤1.8
Penetration number(25°C) 1/10mm
≤23
≤23
≤23
≤23
≤23
≤23
Color(white)
≥+17
≥+17
≥+17
≥+17
≥+17
≥+17
Light stability
≤6
≤7
≤7
≤7
≤7
≤7
Smell
No
No
No
No
No
No
3. Application
Candle Making, Plastic, Pvc, Rubber, Density Board Production, Crayon, Package,
Waterproof Material Production, Lube, Polishing, Coating, Sealing, Adhesive,
Color Masterbatch, etc.
4. Storage
It should be stored in a cool, well-ventilated area, away from fire and heat sources.
5. Package
25kgs/ woven bag 20MT/20'FCL
Manufacturer of light oil- Baoshun Chemical
1.One of the largest manufacturer in China
2.High quality and low price
3.Brand:BS Chemical
4.ISO:9001
5.Good service
1.Description
Light oil , also called naphtha and white oil, is a kind of petrolem product.
It consists of a mixture of different hydrocarbons. It is the main component containing 5-11 carbon atoms, alkanes, cycloalkanes or aromatics. Extracted gas can be used as the use
of naphtha.
2. Property
Light oil at room temperature, atmospheric pressure is a colorless or yellowish transparent liquid
with special odor, insoluble in water. Density 650~750kg/m3. Not more than 0.08% sulfur content,
paraffin content of not more than 60% aromatic content not exceeding 12%, olefin content of not
more than 1.0
3. The situation of the product process
(1)Basics
Light oil is a light oil, from the Persian word, means the volatile petroleum products.Light oil or petroleum from the secondary processing of crude oil distillation cut the corresponding fractions derived.According to the needs of the boiling range, usually a wide distillation range, such as 30-220 °C.Naphtha cracking furnace is to take control of ethylene, propylene, catalytic REFORMING benzene, toluene, xylene important raw materials.As cracking feedstock, requiring light oil in the composition of alkanes and cycloalkanes content is not less than 70% (volume); as catalytic reforming feedstock for the production of high octane gasoline components, the width of the feed to distillate boiling point range of generalis 80-180 °C, for the production of aromatic hydrocarbons, the feed for the narrow fractions, the boiling point range of 60-165 °C.Foreign light straight-run naphtha used boiling range as 0-100 °C, heavy straight-run naphtha boiling range is 100-200 °C; FCC naphtha have <105 °C ,105-160 °C and 160 -200 °C for light, medium and heavy three.
(2)Technology
Usually obtained by the distillation of crude oil directly, but also by secondary processing hydrotreated gasoline obtained
4.Application
Mainly used as fertilizer, catalytic reforming of ethylene production and raw materials, solvents can
also be used to produce oil or petroleum products as a blending component.
5.Technical Data
Technique Data
Appearance
Purity
Crystallization Point
colorless or yellowish transparent liquid
95% Min
0°C
Ash content
Non-Volatile Matter
Packing
2.High quality and low price
3.Brand:BS Chemical
4.ISO:9001
5.Good service
1.Description
Light oil , also called naphtha and white oil, is a kind of petrolem product.
It consists of a mixture of different hydrocarbons. It is the main component containing 5-11 carbon atoms, alkanes, cycloalkanes or aromatics. Extracted gas can be used as the use
of naphtha.
2. Property
Light oil at room temperature, atmospheric pressure is a colorless or yellowish transparent liquid
with special odor, insoluble in water. Density 650~750kg/m3. Not more than 0.08% sulfur content,
paraffin content of not more than 60% aromatic content not exceeding 12%, olefin content of not
more than 1.0
3. The situation of the product process
(1)Basics
Light oil is a light oil, from the Persian word, means the volatile petroleum products.Light oil or petroleum from the secondary processing of crude oil distillation cut the corresponding fractions derived.According to the needs of the boiling range, usually a wide distillation range, such as 30-220 °C.Naphtha cracking furnace is to take control of ethylene, propylene, catalytic REFORMING benzene, toluene, xylene important raw materials.As cracking feedstock, requiring light oil in the composition of alkanes and cycloalkanes content is not less than 70% (volume); as catalytic reforming feedstock for the production of high octane gasoline components, the width of the feed to distillate boiling point range of generalis 80-180 °C, for the production of aromatic hydrocarbons, the feed for the narrow fractions, the boiling point range of 60-165 °C.Foreign light straight-run naphtha used boiling range as 0-100 °C, heavy straight-run naphtha boiling range is 100-200 °C; FCC naphtha have <105 °C ,105-160 °C and 160 -200 °C for light, medium and heavy three.
(2)Technology
Usually obtained by the distillation of crude oil directly, but also by secondary processing hydrotreated gasoline obtained
4.Application
Mainly used as fertilizer, catalytic reforming of ethylene production and raw materials, solvents can
also be used to produce oil or petroleum products as a blending component.
5.Technical Data
Technique Data
Appearance
Purity
Crystallization Point
colorless or yellowish transparent liquid
95% Min
0°C
Ash content
Non-Volatile Matter
Packing
Manufacturer of light oil- Baoshun Chemical
1.One of the largest manufacturer in China
2.High quality and low price
3.Brand:BS Chemical
4.ISO:9001
5.Good service
1.Description
Light oil , also called naphtha and white oil, is a kind of petrolem product.
It consists of a mixture of different hydrocarbons. It is the main component containing 5-11 carbon atoms, alkanes, cycloalkanes or aromatics. Extracted gas can be used as the use
of naphtha.
2. Property
Light oil at room temperature, atmospheric pressure is a colorless or yellowish transparent liquid
with special odor, insoluble in water. Density 650~750kg/m3. Not more than 0.08% sulfur content,
paraffin content of not more than 60% aromatic content not exceeding 12%, olefin content of not
more than 1.0
3. The situation of the product process
(1)Basics
Light oil is a light oil, from the Persian word, means the volatile petroleum products.Light oil or petroleum from the secondary processing of crude oil distillation cut the corresponding fractions derived.According to the needs of the boiling range, usually a wide distillation range, such as 30-220 °C.Naphtha cracking furnace is to take control of ethylene, propylene, catalytic REFORMING benzene, toluene, xylene important raw materials.As cracking feedstock, requiring light oil in the composition of alkanes and cycloalkanes content is not less than 70% (volume); as catalytic reforming feedstock for the production of high octane gasoline components, the width of the feed to distillate boiling point range of generalis 80-180 °C, for the production of aromatic hydrocarbons, the feed for the narrow fractions, the boiling point range of 60-165 °C.Foreign light straight-run naphtha used boiling range as 0-100 °C, heavy straight-run naphtha boiling range is 100-200 °C; FCC naphtha have <105 °C ,105-160 °C and 160 -200 °C for light, medium and heavy three.
(2)Technology
Usually obtained by the distillation of crude oil directly, but also by secondary processing hydrotreated gasoline obtained
4.Application
Mainly used as fertilizer, catalytic reforming of ethylene production and raw materials, solvents can
also be used to produce oil or petroleum products as a blending component.
5.Technical Data
Technique Data
Appearance
Purity
Crystallization Point
colorless or yellowish transparent liquid
95% Min
0°C
Ash content
Non-Volatile Matter
Packing
2.High quality and low price
3.Brand:BS Chemical
4.ISO:9001
5.Good service
1.Description
Light oil , also called naphtha and white oil, is a kind of petrolem product.
It consists of a mixture of different hydrocarbons. It is the main component containing 5-11 carbon atoms, alkanes, cycloalkanes or aromatics. Extracted gas can be used as the use
of naphtha.
2. Property
Light oil at room temperature, atmospheric pressure is a colorless or yellowish transparent liquid
with special odor, insoluble in water. Density 650~750kg/m3. Not more than 0.08% sulfur content,
paraffin content of not more than 60% aromatic content not exceeding 12%, olefin content of not
more than 1.0
3. The situation of the product process
(1)Basics
Light oil is a light oil, from the Persian word, means the volatile petroleum products.Light oil or petroleum from the secondary processing of crude oil distillation cut the corresponding fractions derived.According to the needs of the boiling range, usually a wide distillation range, such as 30-220 °C.Naphtha cracking furnace is to take control of ethylene, propylene, catalytic REFORMING benzene, toluene, xylene important raw materials.As cracking feedstock, requiring light oil in the composition of alkanes and cycloalkanes content is not less than 70% (volume); as catalytic reforming feedstock for the production of high octane gasoline components, the width of the feed to distillate boiling point range of generalis 80-180 °C, for the production of aromatic hydrocarbons, the feed for the narrow fractions, the boiling point range of 60-165 °C.Foreign light straight-run naphtha used boiling range as 0-100 °C, heavy straight-run naphtha boiling range is 100-200 °C; FCC naphtha have <105 °C ,105-160 °C and 160 -200 °C for light, medium and heavy three.
(2)Technology
Usually obtained by the distillation of crude oil directly, but also by secondary processing hydrotreated gasoline obtained
4.Application
Mainly used as fertilizer, catalytic reforming of ethylene production and raw materials, solvents can
also be used to produce oil or petroleum products as a blending component.
5.Technical Data
Technique Data
Appearance
Purity
Crystallization Point
colorless or yellowish transparent liquid
95% Min
0°C
Ash content
Non-Volatile Matter
Packing
Marine Lubricant
3 main kinds of marine lubricants: system marine engine oil, medium speed trunk piston engine oil, and marine cylinder engine oil
Marine cylinder engine oil:Features and benefits:1) Superior acid neutralization ability2) Excellent wetting property3) Excellent detergency and dispersancy to effectively handle deposits in piston grooves4) Perfect anti-wear to ensure liner wear protection5) Outstanding oxidation stability to control the oxidation derivatives effectively6) Superior storage stability7) Good seal ability to prevent fuels from leakingRecommended applications:1) Suitable for crosshead engines burning high sulfur content diesel or residual fuels2) C5040 is suitable for low speed, two-stroke, crosshead and supercharge engines burning fuels with sulfur content less than 2.5% by weight3) C5050 and C5070 are suitable for engines burning fuels with sulfur content less than 3.0% and 4.0% by weight respectivelySystem marine engine oil:Features and benefits:1) Perfect anti-emulsification and water separation properties2) Outstanding oxidation stability to ensure long drain interval3) Excellent detergency and dispersancy properties to assure the cleanness of crankcase and other parts4) Good antirust and anticorrosion ability5) Better alkalescence to neutralize acid substances formed during the burning of fuelRecommended applications:1) Suitable for the lubrication of crankcase of low speed crosshead engines2) S3012 and S4012 can also be used as middle speed engine oil working in diesel trunk piston engines with the fuel containing sulfur lower than 0.5% by weight. Furthermore, they also can be used to lubricate the auxiliary facilities on vesselsMedium speed trunk piston engine oil:Features and benefits:1) Perfect anti-emulsification and water separation properties2) Outstanding oxidation stability to control the oxidation products effectively3) Excellent detergency and dispersancy to assure the cleanness of piston and other parts4) Superior cylinder ring and liner wear protection5) Effectively neutralize acid substances formed during burning of fuel6) Also can be used to lubricate diesel-driven dynamotorsRecommended applications:1) Suitable for medium speed four stroke trunk piston engines and crankcases or power plants burning high sulfur content fuels2) T3030 and T4030 can be used for engines burning fuels with sulfur content less than 3.0% by weight, T3040 and T4040, less than 4.0% respectively
Marine cylinder engine oil:Features and benefits:1) Superior acid neutralization ability2) Excellent wetting property3) Excellent detergency and dispersancy to effectively handle deposits in piston grooves4) Perfect anti-wear to ensure liner wear protection5) Outstanding oxidation stability to control the oxidation derivatives effectively6) Superior storage stability7) Good seal ability to prevent fuels from leakingRecommended applications:1) Suitable for crosshead engines burning high sulfur content diesel or residual fuels2) C5040 is suitable for low speed, two-stroke, crosshead and supercharge engines burning fuels with sulfur content less than 2.5% by weight3) C5050 and C5070 are suitable for engines burning fuels with sulfur content less than 3.0% and 4.0% by weight respectivelySystem marine engine oil:Features and benefits:1) Perfect anti-emulsification and water separation properties2) Outstanding oxidation stability to ensure long drain interval3) Excellent detergency and dispersancy properties to assure the cleanness of crankcase and other parts4) Good antirust and anticorrosion ability5) Better alkalescence to neutralize acid substances formed during the burning of fuelRecommended applications:1) Suitable for the lubrication of crankcase of low speed crosshead engines2) S3012 and S4012 can also be used as middle speed engine oil working in diesel trunk piston engines with the fuel containing sulfur lower than 0.5% by weight. Furthermore, they also can be used to lubricate the auxiliary facilities on vesselsMedium speed trunk piston engine oil:Features and benefits:1) Perfect anti-emulsification and water separation properties2) Outstanding oxidation stability to control the oxidation products effectively3) Excellent detergency and dispersancy to assure the cleanness of piston and other parts4) Superior cylinder ring and liner wear protection5) Effectively neutralize acid substances formed during burning of fuel6) Also can be used to lubricate diesel-driven dynamotorsRecommended applications:1) Suitable for medium speed four stroke trunk piston engines and crankcases or power plants burning high sulfur content fuels2) T3030 and T4030 can be used for engines burning fuels with sulfur content less than 3.0% by weight, T3040 and T4040, less than 4.0% respectively
Marine engine oil treatment
Marine engine oil treatment
1 Oil saving 5%-25%
2 Antiwear & friction
3 Environmental friendly
4.Advanced technology
Marine engine oil treatment
1.Discription
Dunba Power Saving & Maintaining addtives for oil for heavy equipment is a power saving and environmental friendly products compound of Nano Metal Particle,polymer,and multifunctional additives,which is made of the newest technological fruit prduced by"national 863 plan".We have the intellectual property rights(Patent No. ZL200810032849.1). It has not only function of
super lubricating,selfrepairing but also of good antioxidation,and good antifriction.
2.Characteristic
1)
Save power 5%-30%,lubricant 50%;
2)Improving the resisting pressure and load capacity of lubricating oil, reducing impact load, and assure the minimum friction;
3)repair attrition dynamically,maitain equipment,reduce repair cost of the equipment effectively;
4)antiwear,reduce friction,reduce shake,cooling,reduce noise,improve efficiency,prolong the service lfe of equipment;
5)Mixed in virous lubricants,not changing the performance of lubricating oil,extend the period of changing oil;
6)Clean oil dirt,prevent malfunction,reduce mechanical accident;
7)The usage is simple and convenient,no damage for the construction of equipment.
3,Technical Characteristic
1)This product is produced by organic and inorganic nano materials, not only possessing the function of strong lubricating & resisting extreme pressure of organic material, but also having intelligent self-repair performance of inorganic nano material. In the process of friction, the nano particle is induced by the friction heat, rapidly penetrating into the micro defect on the surface of metal friction, quickly repairing uneven friction surface, and forming extra smooth,high hardness friction surface, not only reducing the friction coefficient, but also improving the performance of extreme pressure and anti-wear, thereby achieving the effect of power saving ,noise reduction and extending service life.
2)Stable performance,anti-oxidation,excellent dispersivity, mixed with any lubricating oil, no damage for the human body, environmental product.
3)Maintaining the equipment under extreme pressure, make the minimum friction.
Metal Friction surface comparison after and before using Dunba
(after) (before)
4.Application
This product is stable in various lubricants,is suitable for power-saving and maintainance of motive power and merchanical equipment in various boat,ship,and marine transportation.
5,Usage Instruction
Add mixed product to lubrication system, normal usage is about 1% of the total lubricating oil. If you have any problem, please consult the manufacturer.
6,Notice
1)Keep in normal temperature and avoid sunlight
2)Protect from impurity and water
3)Don't drink and avoid long-time skin contact
1 Oil saving 5%-25%
2 Antiwear & friction
3 Environmental friendly
4.Advanced technology
Marine engine oil treatment
1.Discription
Dunba Power Saving & Maintaining addtives for oil for heavy equipment is a power saving and environmental friendly products compound of Nano Metal Particle,polymer,and multifunctional additives,which is made of the newest technological fruit prduced by"national 863 plan".We have the intellectual property rights(Patent No. ZL200810032849.1). It has not only function of
super lubricating,selfrepairing but also of good antioxidation,and good antifriction.
2.Characteristic
1)
Save power 5%-30%,lubricant 50%;
2)Improving the resisting pressure and load capacity of lubricating oil, reducing impact load, and assure the minimum friction;
3)repair attrition dynamically,maitain equipment,reduce repair cost of the equipment effectively;
4)antiwear,reduce friction,reduce shake,cooling,reduce noise,improve efficiency,prolong the service lfe of equipment;
5)Mixed in virous lubricants,not changing the performance of lubricating oil,extend the period of changing oil;
6)Clean oil dirt,prevent malfunction,reduce mechanical accident;
7)The usage is simple and convenient,no damage for the construction of equipment.
3,Technical Characteristic
1)This product is produced by organic and inorganic nano materials, not only possessing the function of strong lubricating & resisting extreme pressure of organic material, but also having intelligent self-repair performance of inorganic nano material. In the process of friction, the nano particle is induced by the friction heat, rapidly penetrating into the micro defect on the surface of metal friction, quickly repairing uneven friction surface, and forming extra smooth,high hardness friction surface, not only reducing the friction coefficient, but also improving the performance of extreme pressure and anti-wear, thereby achieving the effect of power saving ,noise reduction and extending service life.
2)Stable performance,anti-oxidation,excellent dispersivity, mixed with any lubricating oil, no damage for the human body, environmental product.
3)Maintaining the equipment under extreme pressure, make the minimum friction.
Metal Friction surface comparison after and before using Dunba
(after) (before)
4.Application
This product is stable in various lubricants,is suitable for power-saving and maintainance of motive power and merchanical equipment in various boat,ship,and marine transportation.
5,Usage Instruction
Add mixed product to lubrication system, normal usage is about 1% of the total lubricating oil. If you have any problem, please consult the manufacturer.
6,Notice
1)Keep in normal temperature and avoid sunlight
2)Protect from impurity and water
3)Don't drink and avoid long-time skin contact
Subscribe to:
Posts (Atom)