Saturday, September 24, 2011

FUKKOL Metal Stamping Oil II

FUKKOL Metal Stamping Oil II
Rapid drying
improve surface finish.
Low viscosity
Extends tools life
FUKKOL Metal Stamping Oil II

Description
FUKKOL Stamping Oil is a mobile volatile solvent cutting and forming fluid,capable of rapid drying,lubricating,anti-rusting and effectively cooling. It increases the effeciency of high-speed cutting and forming operation, improves surface finish and greatly extends tools life.
-Fukkol venus series contains good quality lubricity,coolant additives,and anti-rust inhibitors. The venus series will only remain a thin film to protect metal surface after rapid volatile process. It does not contaminate the surface and extends the tools life.

Benefits
-Rapid drying, metal parts will not stick together.
-Strong lubricity, improves surface finish.
-Low viscosity,cools effectively.
-Extends tools life.
-Inhibits corrosion.
--Clear view to working area.

Applications
Typially used for laminator, micro electric-motor case,connectors, air-conditioner, heat dispersal devices, electronic and computer components,
Button battery case and other small metal parts.
The venus series is specially designed for cutting(thickness 1.5mm and below)stainless steel,brass,phosphur bronze and other severe operation.
Typical physical properties

I
II
III
IV
V
Volatility

High

Medium

High

Medium

Low

Operation Difficulties

Low/Medium

Medium

High

Medium

High


FUKKOL Metal Stamping Oil IV

FUKKOL Metal Stamping Oil IV
Rapid drying
improve surface finish.
Low viscosity
Extends tools life
FUKKOL Metal Stamping Oil IV

Description
FUKKOL Stamping Oil is a mobile volatile solvent cutting and forming fluid,capable of rapid drying,lubricating,anti-rusting and effectively cooling. It increases the effeciency of high-speed cutting and forming operation, improves surface finish and greatly extends tools life.
-Fukkol venus series contains good quality lubricity,coolant additives,and anti-rust inhibitors. The venus series will only remain a thin film to protect metal surface after rapid volatile process. It does not contaminate the surface and extends the tools life.

Benefits
-Rapid drying, metal parts will not stick together.
-Strong lubricity, improves surface finish.
-Low viscosity,cools effectively.
-Extends tools life.
-Inhibits corrosion.
--Clear view to working area.

Applications
Typially used for laminator, micro electric-motor case,connectors, air-conditioner, heat dispersal devices, electronic and computer components,
Button battery case and other small metal parts.
The venus series is specially designed for cutting(thickness 1.5mm and below)stainless steel,brass,phosphur bronze and other severe operation.
Typical physical properties

I
II
III
IV
V
Volatility

High

Medium

High

Medium

Low

Operation Difficulties

Low/Medium

Medium

High

Medium

High


FUKKOL Metal Stamping Oil I

FUKKOL Metal Stamping Oil I
Rapid drying
improve surface finish.
Low viscosity
Extends tools life
FUKKOL Metal Stamping Oil I

Description
FUKKOL Stamping Oil is a mobile volatile solvent cutting and forming fluid,capable of rapid drying,lubricating,anti-rusting and effectively cooling. It increases the effeciency of high-speed cutting and forming operation, improves surface finish and greatly extends tools life.
-Fukkol venus series contains good quality lubricity,coolant additives,and anti-rust inhibitors. The venus series will only remain a thin film to protect metal surface after rapid volatile process. It does not contaminate the surface and extends the tools life.

Benefits
-Rapid drying, metal parts will not stick together.
-Strong lubricity, improves surface finish.
-Low viscosity,cools effectively.
-Extends tools life.
-Inhibits corrosion.
--Clear view to working area.

Applications
Typially used for laminator, micro electric-motor case,connectors, air-conditioner, heat dispersal devices, electronic and computer components,
Button battery case and other small metal parts.
The venus series is specially designed for cutting(thickness 1.5mm and below)stainless steel,brass,phosphur bronze and other severe operation.
Typical physical properties

I
II
III
IV
V
Volatility

High

Medium

High

Medium

Low

Operation Difficulties

Low/Medium

Medium

High

Medium

High


FUKKOL Metal Stamping Oil V

FUKKOL Metal Stamping Oil V
Rapid drying
improve surface finish
Low viscosity
Extends tools life
FUKKOL Metal Stamping Oil VD
escription
-Fukkol venus series is a mobile volatile solvent cutting and forming fluid,capable of rapid drying,lubricating,anti-rusting and effectively cooling. It increases the effeciency of high-speed cutting and forming operation, improves surface finish and greatly extends tools life.
-Fukkol venus series contains good quality lubricity,coolant additives,and anti-rust inhibitors. The venus series will only remain a thin film to protect metal surface after rapid volatile process. It does not contaminate the surface and extends the tools life.

Benefits
-Rapid drying, metal parts will not stick together.
-Strong lubricity, improves surface finish.
-Low viscosity,cools effectively.
-Extends tools life.
-Inhibits corrosion.
--Clear view to working area.

Applications
Typially used for laminator, micro electric-motor case,connectors, air-conditioner, heat dispersal devices, electronic and computer components,
Button battery case and other small metal parts.
The venus series is specially designed for cutting(thickness 1.5mm and below)stainless steel,brass,phosphur bronze and other severe operation.


Typical physical properties

I
II
III
IV
V
Volatility

High

Medium

High

Medium

Low

Operation Difficulties

Low/Medium

Medium

High

Medium

High



FUKKOL Metal Stamping Oil

FUKKOL Metal Stamping Oil
Rapid drying
improve surface finish.
Low viscosity
Extends tools life
FUKKOL Metal Stamping Oil

Description
FUKKOL Stamping Oil is a mobile volatile solvent cutting and forming fluid,capable of rapid drying,lubricating,anti-rusting and effectively cooling. It increases the effeciency of high-speed cutting and forming operation, improves surface finish and greatly extends tools life.
-Fukkol venus series contains good quality lubricity,coolant additives,and anti-rust inhibitors. The venus series will only remain a thin film to protect metal surface after rapid volatile process. It does not contaminate the surface and extends the tools life.

Benefits
-Rapid drying, metal parts will not stick together.
-Strong lubricity, improves surface finish.
-Low viscosity,cools effectively.
-Extends tools life.
-Inhibits corrosion.
--Clear view to working area.

Applications
Typially used for laminator, micro electric-motor case,connectors, air-conditioner, heat dispersal devices, electronic and computer components,
Button battery case and other small metal parts.
The venus series is specially designed for cutting(thickness 1.5mm and below)stainless steel,brass,phosphur bronze and other severe operation.
Typical physical properties

I
II
III
IV
V
Volatility

High

Medium

High

Medium

Low

Operation Difficulties

Low/Medium

Medium

High

Medium

High


FUKKOL Metal Stamping Oil

FUKKOL Metal Stamping Oil
Rapid drying
improve surface finish.
Low viscosity
Extends tools life
FUKKOL Metal Stamping Oil

Description
FUKKOL Stamping Oil is a mobile volatile solvent cutting and forming fluid,capable of rapid drying,lubricating,anti-rusting and effectively cooling. It increases the effeciency of high-speed cutting and forming operation, improves surface finish and greatly extends tools life.
-Fukkol venus series contains good quality lubricity,coolant additives,and anti-rust inhibitors. The venus series will only remain a thin film to protect metal surface after rapid volatile process. It does not contaminate the surface and extends the tools life.

Benefits
-Rapid drying, metal parts will not stick together.
-Strong lubricity, improves surface finish.
-Low viscosity,cools effectively.
-Extends tools life.
-Inhibits corrosion.
--Clear view to working area.

Applications
Typially used for laminator, micro electric-motor case,connectors, air-conditioner, heat dispersal devices, electronic and computer components,
Button battery case and other small metal parts.
The venus series is specially designed for cutting(thickness 1.5mm and below)stainless steel,brass,phosphur bronze and other severe operation.
Typical physical properties

I
II
III
IV
V
Volatility

High

Medium

High

Medium

Low

Operation Difficulties

Low/Medium

Medium

High

Medium

High


FUKKOL Molybdenum Disufide Spary Lubricant

FUKKOL Molybdenum Disufide Spary Lubricant
-good lubricanting quality
-Molybdenum Disufide base ,apply on many aspect
FUKKOL Molybdenum Disufide Spary Lubricant

Description:
FUKKOL Molyfu Spray is a dry film lubricant fortified with
Molybdenum Disulfide that reduces friction and improves
overall operating perfor-mance. Molyfu Spray bonds
instantly to metal, rubber, plastic and most substrates to
form a dirt repelling barrier that lubricates and protects the
surface from pressure and friction. Withstands temperatures
up to 400°C and extreme pres- sures, as well as water
and chemical attack.

Application
Recommended as a general maintenance lubricant
on gaskets, transfer belts and conveyor belts; as an assembly lube on motors, plant machinery and handling equipment;as
a release agent for rubber moldings; and as a general lubricant for high temper-ature, low load, or high rpm slides, rollers,
wheels,gears, chains and hoists.

Features
-Anti - Seize and Anti - Wear
-Dirt repelling barrier
-Can mix in other bricants

54/56 fully refined paraffin wax

paraffin wax

GRADE
FULLY REFINED PARAFFIN WAX 54-56
RESULTS
ITEMS
QUALITY INDEX
ACTUAL
TEST MEANS
PRIOR CLASS
FIRST CLASS
MELTING POINT °C FROM:
TO:
54
54.5
GB/T 2539
56
OIL CONTENT,%, LESS THAN
0.5
0.8
0.35
GB/T 3554
COLOR, MORE THAN
+28
+25
+30
GB/T 3555
LIGHT STABILITY,
NO MORE THAN
4
4
3-4
SH/T 0404
NEEDLE
PENETRATION
(25°C),1/10mm LESS THAN
18
19
15
GB/T 4985
KINEMATIC VISCOSITY(100°C)
MM2/S
REPORT
3.642
GB/T 265
ODOR LESS THAN
2
0
SH/T 0414
SOLUBLE ACID OR ALKALINE
NIL
NIL
SH/T 0407
IMPURITY OR WATER
NIL
NIL

FUKKOL Molybdenum Disufide Spary Lubricant

FUKKOL Molybdenum Disufide Spary Lubricant
-good lubricanting quality
-Molybdenum Disufide base ,apply on many aspect
FUKKOL Molybdenum Disufide Spary Lubricant

Description:
FUKKOL Molyfu Spray is a dry film lubricant fortified with
Molybdenum Disulfide that reduces friction and improves
overall operating perfor-mance. Molyfu Spray bonds
instantly to metal, rubber, plastic and most substrates to
form a dirt repelling barrier that lubricates and protects the
surface from pressure and friction. Withstands temperatures
up to 400°C and extreme pres- sures, as well as water
and chemical attack.

Application
Recommended as a general maintenance lubricant
on gaskets, transfer belts and conveyor belts; as an assembly lube on motors, plant machinery and handling equipment;as
a release agent for rubber moldings; and as a general lubricant for high temper-ature, low load, or high rpm slides, rollers,
wheels,gears, chains and hoists.

Features
-Anti - Seize and Anti - Wear
-Dirt repelling barrier
-Can mix in other bricants

FUKKOL Mould Damage Check Series Cleaner

FUKKOL Mould Damage Check Series Cleaner
-High effective Clean
-Oil remove
-High permeate
FUKKOL Mould Damage Check Series Cleaner

Intercheck Cleaner / remover are specially formulated to remove oil, grease , dir and other most stubbom form mechanical parts and toolings.


Intercheck Cleaner are easy to apply and provide excellent cleaning power and insatnt penetration to hard reaching areas.

FUKKOL Mould Damage Test Series Intercheck Developer

FUKKOL Mould Damage Intercheck Developer
-Easy develop mould and machine damage crack
-no harmful for mould
FUKKOL Mould Damage Test Series Intercheck Developer

Intercheck Developer is a ready to use suspension of white developing particles in a fast drying solvent. intercheck developer produces an opaque with coating, which provides an excellent contrasting background for intercheck penetrant indications.

FUKKOL Mould Damage Test Series Intercheck Penetrant

FUKKOL Mould Damage Test Penetrant
-high penetrant
-easy into damage place
-no harmful to mould
FUKKOL Mould Damage Test Series Intercheck Penetrant

Intercheck Penetrant is a general purpose water washable red colour contrast penetrant. Intercheck exhibits outstanding reliability in locatinf surface - open flaws and discontinuties . Intercheck is formulated to give excellent controlled washability over a wide temperature range and variable dwell times.


Typical applications include casting, forgings, leak testing, welds and general metal work.

FUKKOL Mould Damage Testing Serise Intercheck

FUKKOL Mould Damage Testing Serise Intercheck
-Easy Oil Clean
-Easy Penetrant Damage
-Easy Develop Carck
-Mould Protect
FUKKOL Mould Damage Testing Serise Intercheck

Intercheck Cleaner / remover
are specially formulated to remove oil, grease , dir and other most stubbom form mechanical parts and toolings.
Intercheck Cleaner are easy to apply and provide excellent cleaning power and insatnt penetration to hard reaching areas.

Intercheck Penetrant
is a general purpose water washable red colour contrast penetrant. Intercheck exhibits outstanding reliability in locatinf surface - open flaws and discontinuties . Intercheck is formulated to give excellent controlled washability over a wide temperature range and variable dwell times.
Typical applications include casting, forgings, leak testing, welds and general metal work.

Intercheck Developer
is a ready to use suspension of white developing particles in a fast drying solvent. intercheck developer produces an opaque with coating, which provides an excellent contrasting background for intercheck penetrant indications.


FUKKOL Mould Ejector Pin Lubricant Machine Lubricant

FUKKOL Mould Ejector Pin Lubricant Machine Lubricant
-machine lubricanting
-wide use
-mouldpin use lube
-favourable price


FUKKOL Mould Ejector Pin Lubricant Machine Lubricant

Description
FUKKOL PTFE LUBE is a premium silicone fluid that exhibits superior lubrication and viscosity characteristics even under high temperature and pressure. It chemically reacts with metal surfaces to provide lubrication properties far superior than conventional silicone lubricant.


Application
Recommended for use on thimble of mould, ejector pin, lubrication of machine surface and knives, metal, wood, glass, etc.


FUKKOL Mould Ejector Pin Lubricant Machine Lubricant

FUKKOL Mould Ejector Pin Lubricant Machine Lubricant
-machine lubricanting
-wide use
-mouldpin use lube
-favourable price


FUKKOL Mould Ejector Pin Lubricant Machine Lubricant

Description
FUKKOL PTFE LUBE is a premium silicone fluid that exhibits superior lubrication and viscosity characteristics even under high temperature and pressure. It chemically reacts with metal surfaces to provide lubrication properties far superior than conventional silicone lubricant.


Application
Recommended for use on thimble of mould, ejector pin, lubrication of machine surface and knives, metal, wood, glass, etc.


FUKKOL Mould Protector Anti-Rust for Long-Term Protect compere WD-40

FUKKOL Mould Protector
-Green Grease like protector
-long-term mould protect
-easy clean
FUKKOL Mould Protector Anti-Rust for Long-Term Protect compere WD-40


Description
Fukkol Mould Protector is a light grease-like coating that has a green color that visibly shows where the product has been applied. Mould Protector displaces moisture and provides corrosion protection for more than two years of indoor storage. The product may be removed with a mild solvent rinse or wipe or simply by putting a mould back in service and running a few parts.

Application
It can form green colored ultra-thin soft film which provides long term corrosion protection to metals. Absolutely displaces water and resists moisture. Especially designed for protection of moulds, castings and dies in production or in storage. A reliable rust preventative agent for metal tools and parts..

Benefits
-Contains a green dye to identify treated surfaces
-Simply removed by putting mould back in service
-Provides complete protection against finger-print
-Provides corrosion protection for more than 2 years (indoor)
-No CFC

FUKKOL Mould Protector Anti-Rust for Long-Term Protect compere WD-40

FUKKOL Mould Protector
-Green Grease like protector
-long-term mould protect
-easy clean
FUKKOL Mould Protector Anti-Rust for Long-Term Protect compere WD-40


Description
Fukkol Mould Protector is a light grease-like coating that has a green color that visibly shows where the product has been applied. Mould Protector displaces moisture and provides corrosion protection for more than two years of indoor storage. The product may be removed with a mild solvent rinse or wipe or simply by putting a mould back in service and running a few parts.

Application
It can form green colored ultra-thin soft film which provides long term corrosion protection to metals. Absolutely displaces water and resists moisture. Especially designed for protection of moulds, castings and dies in production or in storage. A reliable rust preventative agent for metal tools and parts..

Benefits
-Contains a green dye to identify treated surfaces
-Simply removed by putting mould back in service
-Provides complete protection against finger-print
-Provides corrosion protection for more than 2 years (indoor)
-No CFC

FUKKOL Mould Protector Green Color

FUKKOL Mould Protector Green Color
Simply removed by putting mould back in service

FUKKOL Mould Protector Green Color
Description
Fukkol Mould Protector is a light grease-like coating that has a green color that visibly shows where the product has been applied. Mould Protector displaces moisture and provides corrosion protection for more than two years of indoor storage. The product may be removed with a mild solvent rinse or wipe or simply by putting a mould back in service and running a few parts.


Benefits
-Contains a green dye to identify treated surfaces
-Simply removed by putting mould back in service
-Provides complete protection against finger-print
-Provides corrosion protection for more than 2 years (indoor)
-No CFC


Application
It can form green colored ultra-thin soft film which provides long term corrosion protection to metals. Absolutely displaces water and resists moisture. Especially designed for protection of moulds, castings and dies in production or in storage. A reliable rust preventative agent for metal tools and parts.

Flash Point (PMCC)
< 0°C
Boiling Range
> 100°C
Specific Gravity
0.6032
Vapor Density
Is heavier than air
Evaporation Rate
>1 (Butyl Acetate=1)
Stability
Stable

56 fully refined paraffin wax

we supply 54,56,58,60,62,64,70 degree refined fully paraffin wax(kunlun brand).58 semi refined paraffin wax(dongfang brand).

56 Fully Refined Paraffin Wax (kunlun brand)

ITME
QUALITY SPECIFICATION
TEST MEANS
Melting Point(Deg. C)
56-58
GB/T2539
Oil Content
0.5 max
GB/T3554
Color
28-+30
GB/T3555
Light Stability
4 max
SH/T0404
Needle Penetration (25Deg. C 100g)
15max
GB/T4985
Odor
2 max
SH/T0414
Mechanical Impurity & Moisture
NO

Water-solubility Acid & Base
NO
SH/T0407
Kinematic Viscosity (100Deg. C/mm2/s

GB/T265


FUKKOL Mould Protector Spray Green Color

FUKKOL Mould Protector Spray Green Color
Simply removed by putting mould back in service

FUKKOL Mould Protector Spray Green Color
Description
Fukkol Mould Protector is a light grease-like coating that has a green color that visibly shows where the product has been applied. Mould Protector displaces moisture and provides corrosion protection for more than two years of indoor storage. The product may be removed with a mild solvent rinse or wipe or simply by putting a mould back in service and running a few parts.


Benefits
-Contains a green dye to identify treated surfaces
-Simply removed by putting mould back in service
-Provides complete protection against finger-print
-Provides corrosion protection for more than 2 years (indoor)
-No CFC


Application
It can form green colored ultra-thin soft film which provides long term corrosion protection to metals. Absolutely displaces water and resists moisture. Especially designed for protection of moulds, castings and dies in production or in storage. A reliable rust preventative agent for metal tools and parts.

Flash Point (PMCC)
< 0°C
Boiling Range
> 100°C
Specific Gravity
0.6032
Vapor Density
Is heavier than air
Evaporation Rate
>1 (Butyl Acetate=1)
Stability
Stable

FUKKOL Mould Protector for Mould Injector

FUKKOL Mould Protector for Mould Injector
Simply removed by putting mould back in service

FUKKOL Mould Protector for Mould Injector
Description
Fukkol Mould Protector is a light grease-like coating that has a green color that visibly shows where the product has been applied. Mould Protector displaces moisture and provides corrosion protection for more than two years of indoor storage. The product may be removed with a mild solvent rinse or wipe or simply by putting a mould back in service and running a few parts.


Benefits
-Contains a green dye to identify treated surfaces
-Simply removed by putting mould back in service
-Provides complete protection against finger-print
-Provides corrosion protection for more than 2 years (indoor)
-No CFC


Application
It can form green colored ultra-thin soft film which provides long term corrosion protection to metals. Absolutely displaces water and resists moisture. Especially designed for protection of moulds, castings and dies in production or in storage. A reliable rust preventative agent for metal tools and parts.

Flash Point (PMCC)
< 0°C
Boiling Range
> 100°C
Specific Gravity
0.6032
Vapor Density
Is heavier than air
Evaporation Rate
>1 (Butyl Acetate=1)
Stability
Stable

FUKKOL Mould Relaese agent non-paintable with excellent quality

FUKKOL Mould Relaese agent non-paintable
-oil base
-excellent quality and favourable price
-widely use
FUKKOL Mould Relaese agent non-paintable with excellent quality

Description:
FUKKOL MOULD RELEASE AGENT(NON- PAINTABLE) is an aerosol applied release agent comtaining a highly effective silicone oil, specially formulated to provide a quick, effective, non-staining release of plastics and rubber for most types of plastic injection moulding.
Its specially designed nozzle provides a very fine spray pattern which allows the quantity applied to be fully controlled and the most complicated dies to be completely covered.

B
enefits:
-Ultra fine spray gives controlled application with complete coverage
-Improved finish and reduced risk of over application
-Reduces problems associated with marking and transfering, highly economical, efficient release, only one pass required for many shots of ejection
-Effective and long lasting film provides more numbers of release than most silicone formulations
-Low environmental impact, contains no CFC propellant
Non staining property makes it an excellent lubricant for textile and paper industry.

Precautions:
Pressurised container, protect from sunlight, store at temperature below 50°C
Do not puncture or incinerate
Do not spray on to naked flame
Flammable.

FUKKOL Mould Release Food Grade Spary No Toxic Can Eat

FUKKOL Mould Release Food Grade Spary
-food grade can eat
-easy remove
-no residual
-use in household and other industry
FUKKOL Mould Release Food Grade Spary

Description:
*FUKKOL MOULD RELEASEAGENT (FOOD GRADE) is an aerosol applied release agent formulated to provide a quick, effective,non-staining release of plastics and rubber for most types of moulding process.It is excellent plastic and rubber mould release agent for household and electrical appliance industry and also suitable for all thermal plastic use,especially for SAN plastic resin. In addition, it is specifically designed for products subject to subsequent processes such as printing,painting,plating, hot stamping and bonding operation requiring being free from so-called 'SILICONE PROBLEMS'. Being NSF H1 certificated, it is also suitable for may-contact-food situations.

Summary of Benefits
* Ultra fine spray gives controlled application with complete coverage.
* Improved finish and reduced risk of over application.
* Reduces problems associated with marking and transfer. Highly economical, efficient release. Only one pass required for many shots of ejection.
* Effective and long lasting film provides more numbers of releases than most silicone formulations.
*Low environmental impact. Contains no CFC propellant.
* Will not affect subsequent operations.
* lf necessary, fiIm can be completely removed by mild solvent like alcohol or water soluble cleaner..

Typical Data
Active ingredient, Solvent, Propellant, Modified Silicone
Oil, Hydrocarbon Solvent, LPG

Precautions
*Pressurised container, protect from sunlight, store at
temperature below 50°C
*Do not puncture or incinerate.
*Do not spray on to naked flames.
*Inflammable

FUKKOL Mould Release Food Grade Spary No Toxic Can Eat

FUKKOL Mould Release Food Grade Spary
-food grade can eat
-easy remove
-no residual
-use in household and other industry
FUKKOL Mould Release Food Grade Spary

Description:
*FUKKOL MOULD RELEASEAGENT (FOOD GRADE) is an aerosol applied release agent formulated to provide a quick, effective,non-staining release of plastics and rubber for most types of moulding process.It is excellent plastic and rubber mould release agent for household and electrical appliance industry and also suitable for all thermal plastic use,especially for SAN plastic resin. In addition, it is specifically designed for products subject to subsequent processes such as printing,painting,plating, hot stamping and bonding operation requiring being free from so-called 'SILICONE PROBLEMS'. Being NSF H1 certificated, it is also suitable for may-contact-food situations.

Summary of Benefits
* Ultra fine spray gives controlled application with complete coverage.
* Improved finish and reduced risk of over application.
* Reduces problems associated with marking and transfer. Highly economical, efficient release. Only one pass required for many shots of ejection.
* Effective and long lasting film provides more numbers of releases than most silicone formulations.
*Low environmental impact. Contains no CFC propellant.
* Will not affect subsequent operations.
* lf necessary, fiIm can be completely removed by mild solvent like alcohol or water soluble cleaner..

Typical Data
Active ingredient, Solvent, Propellant, Modified Silicone
Oil, Hydrocarbon Solvent, LPG

Precautions
*Pressurised container, protect from sunlight, store at
temperature below 50°C
*Do not puncture or incinerate.
*Do not spray on to naked flames.
*Inflammable

FUKKOL Mould Release agent non-paintable excellent quality

FUKKOL Mould Release agent
-oil base
-excellent quality and favourable price
-no CFC
FUKKOL Mould Release agent non-paintable excellent quality


Description
FUKKOL MOULD RELEASE AGENT(NON - PAINTBLE) is an aerosol applied release agent comtaining a highly effective silicone oil, specially formulated to provide a quick, effective, non-staining release of plastics and rubber for most types of plastic injection moulding.



Benefits
-Ultra fine spray gives controlled application with complete coverage
-Improved finish and reduced risk of over application
-Reduces problems associated with marking and transfer, highly economical, efficient release, only one pass required for many shots of ejection
-Effective and long lasting film provides more numbers of release than most silicone formulations
-Low environmental impact, contains no CFC propellant
Non staining property makes it an excellent lubricant for textile and paper industry.


Precautions
*Pressurised container, protect from sunlight, store at temperature below 50°C
*Do not puncture or incinerate
*Do not spray on to naked flames
*Inflammable


Typical Date
Propellant LPG
Solvent Chlorinated Solvent
Active ingredient Silicone Oil


FUKKOL Mould Release agent paintable easy dry

FUKKOL Mould Release agent paintable
-no oil contains
-quick dry
-paintable
FUKKOL Mould Release agent paintable

Description
FUKKOL PAINTABLE is an aerosol applied release agent formulated to provide a quick, effective, non - staining release of plastics and rubber for most types of plastic injection moulding. In addition, it is specially designed for products subject to subsequent processes such as printing, painting, plating, hot stamping and bonding operations without the so- called SILICONE PROBLEMS.

Benefits
-Ultra fine spray gives controlled application with complete coverage
-Improved finish and reduced risk of over application
-Reduces problems associated with marking and transporting, highly economical, efficient release, only one pass required for many shots of ejection
-Effective and long lasting film provides more numbers of release than most silicone formulations
-Low environmental impact, contains no CFC propellant
-Excellent for all thermal plastic, especially ABS and PS
-Will not affect subsequent operations.
-Excellent lubricant for sewing threads, table surface , needles and knives.

Precautions
*Pressure container, protect from sunlight, store at temperature below 50°C
*Do not puncture or incinerate
*Do not spray onto flames
*Inflammable

Typical Data
Propellant LPG
Solvent N. Hexane
Base Fluid EP Powder
Working Temperatrue Range Up to 270°C

FUKKOL Mould Release agent paintable fast dry

FUKKOL Mould Release agent paintable fast dry
-fast dry
-paintable
-no CFC
-no toxic
FUKKOL Mould Release agent paintable fast dry

Description
FUKKOL MOULD RELEASE AGENT(NON - PAINTBLE) is an aerosol applied release agent comtaining a highly effective silicone oil, specially formulated to provide a quick, effective, non-staining release of plastics and rubber for most types of plastic injection moulding.



Benefits
-Ultra fine spray gives controlled application with complete coverage
-Improved finish and reduced risk of over application
-Reduces problems associated with marking and transfer, highly economical, efficient release, only one pass required for many shots of ejection
-Effective and long lasting film provides more numbers of release than most silicone formulations
-Low environmental impact, contains no CFC propellant
Non staining property makes it an excellent lubricant for textile and paper industry.


Precautions
*Pressurised container, protect from sunlight, store at temperature below 50°C
*Do not puncture or incinerate
*Do not spray on to naked flames
*Inflammable


Typical Date
Propellant LPG
Solvent Chlorinated Solvent
Active ingredient Silicone Oi

FUKKOL Muti-Purpose Lithium Grease EP0

FUKKOL Muti-Purpose Lithium Grease EP0
These greases can be applied at higher temperature
FUKKOL Muti-Purpose Lithium Grease EP0
These greases can be applied at higher temperatures

Description
Fukkol Fujitex EP grease is made with new additive technology which makes it possible to eliminate the use of lead while retaining or improving all the performance properties of the previous leaded greases. These new Fujitex EP greases have been designed to meet the growing requirements for multi-service performance including protection from wear under heavy and shock loads and resistance to heat and water washing.

Application
Fujitex EP2 Is an NLGI grade 2 for general multipurpose application at temperatures from -10 to130°C.
Fujitex Ep1 Is an NLGI grade 1 for general multiservice application at temperatures from -10 t o 20°C.
Fujitex ep0 Is an NLGI grade0 1 for low temperatures applications.
Fujitex EP00 Is an NLGI grade 00 for general multipurpose application at temperatures from -20 to130°C.

These greases can be applied at higher temperatures when relubrications interval is adjusted accordingly

Typical physical properties
Fukkol fujitex
EP 2
EP 1
EP0
EP 00
NLG Grade
2
1
0
00
Penetration,worded
265~295
310~340
355~385
400~430
Dropping point°C
≥180
≥180
≥180
≥180
Mineral oil viscosity
cSt AT 40°C 100°C
40°C
150
150
150
522
color

Red
Red
Red
Red


Friday, September 23, 2011

FUKKOL Muti-Purpose Lithium Grease EP1

FUKKOL Muti-Purpose Lithium Grease EP1
These greases can be applied at higher temperature
FUKKOL Muti-Purpose Lithium Grease EP1
These greases can be applied at higher temperatures

Description
Fukkol Fujitex EP grease is made with new additive technology which makes it possible to eliminate the use of lead while retaining or improving all the performance properties of the previous leaded greases. These new Fujitex EP greases have been designed to meet the growing requirements for multi-service performance including protection from wear under heavy and shock loads and resistance to heat and water washing.

Application
Fujitex EP2 Is an NLGI grade 2 for general multipurpose application at temperatures from -10 to130°C.
Fujitex Ep1 Is an NLGI grade 1 for general multiservice application at temperatures from -10 t o 20°C.
Fujitex ep0 Is an NLGI grade0 1 for low temperatures applications.
Fujitex EP00 Is an NLGI grade 00 for general multipurpose application at temperatures from -20 to130°C.

These greases can be applied at higher temperatures when relubrications interval is adjusted accordingly

Typical physical properties
Fukkol fujitex
EP 2
EP 1
EP0
EP 00
NLG Grade
2
1
0
00
Penetration,worded
265~295
310~340
355~385
400~430
Dropping point°C
≥180
≥180
≥180
≥180
Mineral oil viscosity
cSt AT 40°C 100°C
40°C
150
150
150
522
color

Red
Red
Red
Red


56# Fully Refined Paraffin Wax

1.kunlun brand
2.quality index:prior class
3.Application:candles making\rubber industry\explosives industry
4.M.P:56-58
Test Items
Standard
Test Method
Melting point
56-58
GB/T 2539
Oil Content %(m/m) ≤
0.5
GB/T 3554
Color saybolt ≥
+28
GB/T 3555
Light Stability # ≤
4
SH/T0404
Penetration (25°C)1/10mm ≤
18
GB/T 4985
We supply Kunlun brand semi refined and fully refined paraffin wax purchased directly from PetroChina, with melting points of 54/56, 56/58, 58/60, 60/62, 62/64, 64/66 and others. Our factory produces industrial grade semi-refined paraffin wax. The annual trade volume amounts 20,000MT.
Management Certification: ISO 9001:2000

FUKKOL Muti-Purpose Lithium Grease EP2

FUKKOL Muti-Purpose Lithium Grease EP2
These greases can be applied at higher temperature
FUKKOL Muti-Purpose Lithium Grease EP2
These greases can be applied at higher temperatures

Description
Fukkol Fujitex EP grease is made with new additive technology which makes it possible to eliminate the use of lead while retaining or improving all the performance properties of the previous leaded greases. These new Fujitex EP greases have been designed to meet the growing requirements for multi-service performance including protection from wear under heavy and shock loads and resistance to heat and water washing.

Application
Fujitex EP2 Is an NLGI grade 2 for general multipurpose application at temperatures from -10 to130°C.
Fujitex Ep1 Is an NLGI grade 1 for general multiservice application at temperatures from -10 t o 20°C.
Fujitex ep0 Is an NLGI grade0 1 for low temperatures applications.
Fujitex EP00 Is an NLGI grade 00 for general multipurpose application at temperatures from -20 to130°C.

These greases can be applied at higher temperatures when relubrications interval is adjusted accordingly

Typical physical properties
Fukkol fujitex
EP 2
EP 1
EP0
EP 00
NLG Grade
2
1
0
00
Penetration,worded
265~295
310~340
355~385
400~430
Dropping point°C
≥180
≥180
≥180
≥180
Mineral oil viscosity
cSt AT 40°C 100°C
40°C
150
150
150
522
color

Red
Red
Red
Red


FUKKOL Muti-Purpose Lithium Grease under extreme pressure

FUKKOL Muti-Purpose Lithium Grease under extreme pressure
These greases can be applied at higher temperature
FUKKOL Muti-Purpose Lithium Grease under extreme pressure
These greases can be applied at higher temperatures

Description
Fukkol Fujitex EP grease is made with new additive technology which makes it possible to eliminate the use of lead while retaining or improving all the performance properties of the previous leaded greases. These new Fujitex EP greases have been designed to meet the growing requirements for multi-service performance including protection from wear under heavy and shock loads and resistance to heat and water washing.

Application
Fujitex EP2 Is an NLGI grade 2 for general multipurpose application at temperatures from -10 to130°C.
Fujitex Ep1 Is an NLGI grade 1 for general multiservice application at temperatures from -10 t o 20°C.
Fujitex ep0 Is an NLGI grade0 1 for low temperatures applications.
Fujitex EP00 Is an NLGI grade 00 for general multipurpose application at temperatures from -20 to130°C.

These greases can be applied at higher temperatures when relubrications interval is adjusted accordingly

Typical physical properties
Fukkol fujitex
EP 2
EP 1
EP0
EP 00
NLG Grade
2
1
0
00
Penetration,worded
265~295
310~340
355~385
400~430
Dropping point°C
≥180
≥180
≥180
≥180
Mineral oil viscosity
cSt AT 40°C 100°C
40°C
150
150
150
522
color

Red
Red
Red
Red


FUKKOL Muti-Purpose Lithium Grease

FUKKOL Muti-Purpose Lithium Grease
These greases can be applied at higher temperature
FUKKOL Muti-Purpose Lithium Grease
These greases can be applied at higher temperatures

Description
Fukkol Fujitex EP grease is made with new additive technology which makes it possible to eliminate the use of lead while retaining or improving all the performance properties of the previous leaded greases. These new Fujitex EP greases have been designed to meet the growing requirements for multi-service performance including protection from wear under heavy and shock loads and resistance to heat and water washing.

Application
Fujitex EP2 Is an NLGI grade 2 for general multipurpose application at temperatures from -10 to130°C.
Fujitex Ep1 Is an NLGI grade 1 for general multiservice application at temperatures from -10 t o 20°C.
Fujitex ep0 Is an NLGI grade0 1 for low temperatures applications.
Fujitex EP00 Is an NLGI grade 00 for general multipurpose application at temperatures from -20 to130°C.

These greases can be applied at higher temperatures when relubrications interval is adjusted accordingly

Typical physical properties
Fukkol fujitex
EP 2
EP 1
EP0
EP 00
NLG Grade
2
1
0
00
Penetration,worded
265~295
310~340
355~385
400~430
Dropping point°C
≥180
≥180
≥180
≥180
Mineral oil viscosity
cSt AT 40°C 100°C
40°C
150
150
150
522
color

Red
Red
Red
Red


FUKKOL Nickel Anti-Seize Comhttp://www.alibaba.com/trade/search?IndexArea=product_en&amp;SearchText=nozzle%20anti-seipound Compound

Nickel Anti-Seize Compound Compound
1.Can stand 1450 degree
2.Copper-Free Formulation
3.Electrically Conductive
Nickel Anti-Seize Compound Compound
I. Product Description

FUKKOL Nickel Anti-Seize Compound Compound is a nickel-based formulation that is free of
copper, lead, sulfides and chlorides. This premium high temperature lubricant protects metal-to-metal applications from seizing and galling caused by high temperatures, heavy loads,
vibration, chemicals and corrosion. Chemically inert nickel formulation is safe for use with
most chemicals that are unstable with copper. This product has extremely high temperature
capabilities and excellent chemical resistance.
Regular use of Nickel Anti-Seize will increase performance and prolong equipment life.

II. Applications
Recommended to lubricate metal-to-metal applications where a clean, chemically inert, copper-free formulation is necessary.
Will not poison catalyst beds, reaction chambers, or special alloy fittings.
May be used on fittings, bushings, flanges, headers, nuts, screws, studs, threaded surfaces, pipes,
plugs, and manifolds to prevent seizing and galling of surfaces.

III. Features & Benefits
• Copper-Free Formulation. For use where a clean, chemically inert and stable lubricant is required.
• Extremely High Temperature Resistance. Protects parts up to 1450°C.
• Electrically Conductive. Does not insulate and interrupt current flow.
• Good Choice for Use on Soft Metal Applications. Does not compromise integrity of soft metals.
• Safe For Use on Both Ferrous and Non-Ferrous Metals.
• Will Not Harden. Heat aging won’t affect lubricity of product.
• Resistant to Mild Detergents & Alkaline Wash. Protects against rust and corrosion.
• Facilitates Fast & Easy Disassembly. Saves time in taking apart components.
• Minimal VOC Content. Contains negligible amounts of volatile organic compounds which cause ground smog.

• Contains No Known Ozone depleting Chemicals.
Offers effective performance while complying with the EPA regulations on the use of ozone depleting chemicals.

FUKKOL No Additive Mould Oily Release Spray

it,s with no additive no additive is a high-purity release agent containing no substance harmful to human bodies.
Product Information
FUKKOL MOULD RELEASE AGENT(NON - PAINTBLE) with no additive is a high-purity release agent containing no substance harmful to human bodies.It enjoys excellent thermal stability with in 300°C warking temperature and can be used with precision and complex molds with multiple slides and snap joints.Its specially designed nozzle provides a very fine spray pattern which allows the quantity applied to be fully controlled and the most complicated dies to be completely covered.
Virtue
-Ultra fine spray gives controlled application with complete coverage
-Improved finish and reduced risk of over application
-Reduces problems associated with marking and transfer, highly economical, efficient release, only one pass required for many shots of ejection
-Effective and long lasting film provides more numbers of release than most silicone formulations
-Low environmental impact, contains no CFC propellant
Non staining property makes it an excellent lubricant for textile and paper industry.

FUKKOL No Additive Non-paintable Mould Release Aerosol

it,s with no additive no additive is a high-purity release agent containing no substance harmful to human bodies.
Product Information
FUKKOL MOULD RELEASE AGENT(NON - PAINTBLE) with no additive is a high-purity release agent containing no substance harmful to human bodies.It enjoys excellent thermal stability with in 300°C warking temperature and can be used with precision and complex molds with multiple slides and snap joints.Its specially designed nozzle provides a very fine spray pattern which allows the quantity applied to be fully controlled and the most complicated dies to be completely covered.
Virtue
-Ultra fine spray gives controlled application with complete coverage
-Improved finish and reduced risk of over application
-Reduces problems associated with marking and transfer, highly economical, efficient release, only one pass required for many shots of ejection
-Effective and long lasting film provides more numbers of release than most silicone formulations
-Low environmental impact, contains no CFC propellant
Non staining property makes it an excellent lubricant for textile and paper industry.

FUKKOL OEM Adfesive Remover Glue

FUKKOL OEM Adfesive Remover Glue
10 minutes of soaking
Prolong the soaking time
FUKKOL OEM Adfesive Remover Glue
10 minutes of soaking
Prolong the soaking time

Applications:
Fukkol Sticker Remover CPS is designed for removing problem of stickers. It leaves no sticky residue, harms no work-piece and affects no any work processing.


Directions:
Apply evenly the product onto the sticker. After 10 minutes of soaking, apply again and then wipe it with a cloth. Prolong the soaking time and apply more product if necessary.

Cautions:
1, Do not apply to food.
2, Long time skin contact may cause dry skin.
3, Use it in ventilated place.
4, Keep away from source of ignition.

Typical physical properties

Appearance
Colorless Transparent Liquid
CST at 40°C
1.0~2.0
Density g/cm³
0.77~0.81
Flash point °C
>60



FUKKOL OEM Adhesive Cleaner Glue

FUKKOL OEM Adhesive Cleaner Glue
10 minutes of soaking
Prolong the soaking time
FUKKOL OEM Adhesive Cleaner Glue
10 minutes of soaking
Prolong the soaking time

Applications:
Fukkol Sticker Remover CPS is designed for removing problem of stickers. It leaves no sticky residue, harms no work-piece and affects no any work processing.


Directions:
Apply evenly the product onto the sticker. After 10 minutes of soaking, apply again and then wipe it with a cloth. Prolong the soaking time and apply more product if necessary.

Cautions:
1, Do not apply to food.
2, Long time skin contact may cause dry skin.
3, Use it in ventilated place.
4, Keep away from source of ignition.

Typical physical properties

Appearance
Colorless Transparent Liquid
CST at 40°C
1.0~2.0
Density g/cm³
0.77~0.81
Flash point °C
>60



FUKKOL OEM Adhesive Remover Glue

FUKKOL OEM Adhesive Remover Glue
10 minutes of soaking
Prolong the soaking time
FUKKOL OEM Adhesive Remover Glue
10 minutes of soaking
Prolong the soaking time

Applications:
Fukkol Sticker Remover CPS is designed for removing problem of stickers. It leaves no sticky residue, harms no work-piece and affects no any work processing.


Directions:
Apply evenly the product onto the sticker. After 10 minutes of soaking, apply again and then wipe it with a cloth. Prolong the soaking time and apply more product if necessary.

Cautions:
1, Do not apply to food.
2, Long time skin contact may cause dry skin.
3, Use it in ventilated place.
4, Keep away from source of ignition.

Typical physical properties

Appearance
Colorless Transparent Liquid
CST at 40°C
1.0~2.0
Density g/cm³
0.77~0.81
Flash point °C
>60



FUKKOL OEM Dimethyl Silicone Oil cst 1000000

FUKKOL OEM Dimethyl Silicone Oil cst 1000000
non-adhesive, water-resistant, permeable, luster improving

FUKKOL OEM Dimethyl Silicone Oil cst 1000000
Description
FUKKOL CST SERIES are non-volatile silicon oils widely used in personal care products such as two-in-one shampoo, hair tonic, sunscreen and kinds of cosmetics. They have various effects like smoothing, non-adhesive, water-resistant, permeable, luster improving, etc.
Quality Standard
FDA of USA
Application & Benefit
Skin-care products: water-resistant, non-adhesive, lubricative, soft, protective shield for skin.
Hair-care products: maitains moisture and luster, soft and slippery.
Sweat-resistant agent/ deodorant: will not become white, soft and slippery.
Lubrication of piston(spray)


Storage & Disposal
Container must be fastened tightly after unsealing and stored at normal temperature( avoid heat or being frozen). Normal storage time can be 12 months or more.


CST 500
CST1000
CST 5000
CST 10000
CST 12500
CST 60000
viscosity (25°C)
480~520
950~1050
4800~5200
9600~10400
12000~13000
57600~62400
Specific gravity(25°C)
>0.95
>0.95
>0.95
>0.95
>0.95
>0.95
pour point(°C)
-50
-50
-50
-50
-50
-50
Flash Point(°C)
>280
>280
>280
>280
>280
>280







56# Fully Refined Paraffin Wax

KUNLUN BRAND
quality index:frior class
Application :candles making \rubber industry \explosives industry
M.P:56-58
Test Items
Standard
Test Method
Melting point
56-58
GB/T 2539
Oil Content %(m/m) ≤
0.5
GB/T 3554
Color saybolt ≥
+28
GB/T 3555
Light Stability # ≤
4
SH/T0404
Penetration (25°C)1/10mm ≤
18
GB/T 4985


FUKKOL OEM Dimethyl Silicone Oil cst 1000000

FUKKOL OEM Dimethyl Silicone Oil cst 1000000
non-adhesive, water-resistant, permeable, luster improving

FUKKOL OEM Dimethyl Silicone Oil cst 1000000
Description
FUKKOL CST SERIES are non-volatile silicon oils widely used in personal care products such as two-in-one shampoo, hair tonic, sunscreen and kinds of cosmetics. They have various effects like smoothing, non-adhesive, water-resistant, permeable, luster improving, etc.
Quality Standard
FDA of USA
Application & Benefit
Skin-care products: water-resistant, non-adhesive, lubricative, soft, protective shield for skin.
Hair-care products: maitains moisture and luster, soft and slippery.
Sweat-resistant agent/ deodorant: will not become white, soft and slippery.
Lubrication of piston(spray)


Storage & Disposal
Container must be fastened tightly after unsealing and stored at normal temperature( avoid heat or being frozen). Normal storage time can be 12 months or more.


CST 500
CST1000
CST 5000
CST 10000
CST 12500
CST 60000
viscosity (25°C)
480~520
950~1050
4800~5200
9600~10400
12000~13000
57600~62400
Specific gravity(25°C)
>0.95
>0.95
>0.95
>0.95
>0.95
>0.95
pour point(°C)
-50
-50
-50
-50
-50
-50
Flash Point(°C)
>280
>280
>280
>280
>280
>280







FUKKOL OEM Dimethyl Silicone Oil cst 1000

FUKKOL OEM Dimethyl Silicone Oil cst 1000
non-adhesive, water-resistant, permeable, luster improving

FUKKOL OEM Dimethyl Silicone Oil cst 1000
Description
FUKKOL CST SERIES are non-volatile silicon oils widely used in personal care products such as two-in-one shampoo, hair tonic, sunscreen and kinds of cosmetics. They have various effects like smoothing, non-adhesive, water-resistant, permeable, luster improving, etc.
Quality Standard
FDA of USA
Application & Benefit
Skin-care products: water-resistant, non-adhesive, lubricative, soft, protective shield for skin.
Hair-care products: maitains moisture and luster, soft and slippery.
Sweat-resistant agent/ deodorant: will not become white, soft and slippery.
Lubrication of piston(spray)


Storage & Disposal
Container must be fastened tightly after unsealing and stored at normal temperature( avoid heat or being frozen). Normal storage time can be 12 months or more.


CST 500
CST1000
CST 5000
CST 10000
CST 12500
CST 60000
viscosity (25°C)
480~520
950~1050
4800~5200
9600~10400
12000~13000
57600~62400
Specific gravity(25°C)
>0.95
>0.95
>0.95
>0.95
>0.95
>0.95
pour point(°C)
-50
-50
-50
-50
-50
-50
Flash Point(°C)
>280
>280
>280
>280
>280
>280







FUKKOL OEM Dimethyl Silicone Oil cst 300000

FUKKOL OEM Dimethyl Silicone Oil cst 300000
non-adhesive, water-resistant, permeable, luster improving

FUKKOL OEM Dimethyl Silicone Oil cst 300000
Description
FUKKOL CST SERIES are non-volatile silicon oils widely used in personal care products such as two-in-one shampoo, hair tonic, sunscreen and kinds of cosmetics. They have various effects like smoothing, non-adhesive, water-resistant, permeable, luster improving, etc.
Quality Standard
FDA of USA
Application & Benefit
Skin-care products: water-resistant, non-adhesive, lubricative, soft, protective shield for skin.
Hair-care products: maitains moisture and luster, soft and slippery.
Sweat-resistant agent/ deodorant: will not become white, soft and slippery.
Lubrication of piston(spray)


Storage & Disposal
Container must be fastened tightly after unsealing and stored at normal temperature( avoid heat or being frozen). Normal storage time can be 12 months or more.


CST 500
CST1000
CST 5000
CST 10000
CST 12500
CST 60000
viscosity (25°C)
480~520
950~1050
4800~5200
9600~10400
12000~13000
57600~62400
Specific gravity(25°C)
>0.95
>0.95
>0.95
>0.95
>0.95
>0.95
pour point(°C)
-50
-50
-50
-50
-50
-50
Flash Point(°C)
>280
>280
>280
>280
>280
>280







FUKKOL OEM Dimethyl Silicone Oil cst 500000

FUKKOL OEM Dimethyl Silicone Oil cst 500000
non-adhesive, water-resistant, permeable, luster improving

FUKKOL OEM Dimethyl Silicone Oil cst 500000
Description
FUKKOL CST SERIES are non-volatile silicon oils widely used in personal care products such as two-in-one shampoo, hair tonic, sunscreen and kinds of cosmetics. They have various effects like smoothing, non-adhesive, water-resistant, permeable, luster improving, etc.
Quality Standard
FDA of USA
Application & Benefit
Skin-care products: water-resistant, non-adhesive, lubricative, soft, protective shield for skin.
Hair-care products: maitains moisture and luster, soft and slippery.
Sweat-resistant agent/ deodorant: will not become white, soft and slippery.
Lubrication of piston(spray)


Storage & Disposal
Container must be fastened tightly after unsealing and stored at normal temperature( avoid heat or being frozen). Normal storage time can be 12 months or more.


CST 500
CST1000
CST 5000
CST 10000
CST 12500
CST 60000
viscosity (25°C)
480~520
950~1050
4800~5200
9600~10400
12000~13000
57600~62400
Specific gravity(25°C)
>0.95
>0.95
>0.95
>0.95
>0.95
>0.95
pour point(°C)
-50
-50
-50
-50
-50
-50
Flash Point(°C)
>280
>280
>280
>280
>280
>280







FUKKOL OEM Dimethyl Silicone Oil cst 500

FUKKOL OEM Dimethyl Silicone Oil cst 500
non-adhesive, water-resistant, permeable, luster improving

FUKKOL OEM Dimethyl Silicone Oil cst 500
Description
FUKKOL CST SERIES are non-volatile silicon oils widely used in personal care products such as two-in-one shampoo, hair tonic, sunscreen and kinds of cosmetics. They have various effects like smoothing, non-adhesive, water-resistant, permeable, luster improving, etc.
Quality Standard
FDA of USA
Application & Benefit
Skin-care products: water-resistant, non-adhesive, lubricative, soft, protective shield for skin.
Hair-care products: maitains moisture and luster, soft and slippery.
Sweat-resistant agent/ deodorant: will not become white, soft and slippery.
Lubrication of piston(spray)


Storage & Disposal
Container must be fastened tightly after unsealing and stored at normal temperature( avoid heat or being frozen). Normal storage time can be 12 months or more.


CST 500
CST1000
CST 5000
CST 10000
CST 12500
CST 60000
viscosity (25°C)
480~520
950~1050
4800~5200
9600~10400
12000~13000
57600~62400
Specific gravity(25°C)
>0.95
>0.95
>0.95
>0.95
>0.95
>0.95
pour point(°C)
-50
-50
-50
-50
-50
-50
Flash Point(°C)
>280
>280
>280
>280
>280
>280







FUKKOL OEM Dimethyl Silicone Oil cst 50

FUKKOL OEM Dimethyl Silicone Oil cst 50
non-adhesive, water-resistant, permeable, luster improving

FUKKOL OEM Dimethyl Silicone Oil cst 50
Description
FUKKOL CST SERIES are non-volatile silicon oils widely used in personal care products such as two-in-one shampoo, hair tonic, sunscreen and kinds of cosmetics. They have various effects like smoothing, non-adhesive, water-resistant, permeable, luster improving, etc.
Quality Standard
FDA of USA
Application & Benefit
Skin-care products: water-resistant, non-adhesive, lubricative, soft, protective shield for skin.
Hair-care products: maitains moisture and luster, soft and slippery.
Sweat-resistant agent/ deodorant: will not become white, soft and slippery.
Lubrication of piston(spray)


Storage & Disposal
Container must be fastened tightly after unsealing and stored at normal temperature( avoid heat or being frozen). Normal storage time can be 12 months or more.


CST 500
CST1000
CST 5000
CST 10000
CST 12500
CST 60000
viscosity (25°C)
480~520
950~1050
4800~5200
9600~10400
12000~13000
57600~62400
Specific gravity(25°C)
>0.95
>0.95
>0.95
>0.95
>0.95
>0.95
pour point(°C)
-50
-50
-50
-50
-50
-50
Flash Point(°C)
>280
>280
>280
>280
>280
>280







FUKKOL OEM Dimethyl Silicone Oil cst 60000 Compare with Dow Corning Silicone Oil

FUKKOL OEM Dimethyl Silicone Oil cst 60000 Compare with Dow Corning Silicone Oil
non-adhesive, water-resistant, permeable, lust

FUKKOL OEM Dimethyl Silicone Oil cst 60000 Compare with Dow Corning Silicone Oil
Description
FUKKOL CST SERIES are non-volatile silicon oils widely used in personal care products such as two-in-one shampoo, hair tonic, sunscreen and kinds of cosmetics. They have various effects like smoothing, non-adhesive, water-resistant, permeable, luster improving, etc.
Quality Standard
FDA of USA
Application & Benefit
Skin-care products: water-resistant, non-adhesive, lubricative, soft, protective shield for skin.
Hair-care products: maitains moisture and luster, soft and slippery.
Sweat-resistant agent/ deodorant: will not become white, soft and slippery.
Lubrication of piston(spray)


Storage & Disposal
Container must be fastened tightly after unsealing and stored at normal temperature( avoid heat or being frozen). Normal storage time can be 12 months or more.


CST 500
CST1000
CST 5000
CST 10000
CST 12500
CST 60000
viscosity (25°C)
480~520
950~1050
4800~5200
9600~10400
12000~13000
57600~62400
Specific gravity(25°C)
>0.95
>0.95
>0.95
>0.95
>0.95
>0.95
pour point(°C)
-50
-50
-50
-50
-50
-50
Flash Point(°C)
>280
>280
>280
>280
>280
>280







FUKKOL OEM Dimethyl Silicone Oil cst 6000

FUKKOL OEM Dimethyl Silicone Oil cst 6000
non-adhesive, water-resistant, permeable, luster improving

FUKKOL OEM Dimethyl Silicone Oil cst 6000
Description
FUKKOL CST SERIES are non-volatile silicon oils widely used in personal care products such as two-in-one shampoo, hair tonic, sunscreen and kinds of cosmetics. They have various effects like smoothing, non-adhesive, water-resistant, permeable, luster improving, etc.
Quality Standard
FDA of USA
Application & Benefit
Skin-care products: water-resistant, non-adhesive, lubricative, soft, protective shield for skin.
Hair-care products: maitains moisture and luster, soft and slippery.
Sweat-resistant agent/ deodorant: will not become white, soft and slippery.
Lubrication of piston(spray)


Storage & Disposal
Container must be fastened tightly after unsealing and stored at normal temperature( avoid heat or being frozen). Normal storage time can be 12 months or more.


CST 500
CST1000
CST 5000
CST 10000
CST 12500
CST 60000
viscosity (25°C)
480~520
950~1050
4800~5200
9600~10400
12000~13000
57600~62400
Specific gravity(25°C)
>0.95
>0.95
>0.95
>0.95
>0.95
>0.95
pour point(°C)
-50
-50
-50
-50
-50
-50
Flash Point(°C)
>280
>280
>280
>280
>280
>280







FUKKOL OEM Dimethyl Silicone Oil

FUKKOL OEM Dimethyl Silicone Oil
non-adhesive, water-resistant, permeable, luster improving

FUKKOL OEM Dimethyl Silicone Oil
Description
FUKKOL CST SERIES are non-volatile silicon oils widely used in personal care products such as two-in-one shampoo, hair tonic, sunscreen and kinds of cosmetics. They have various effects like smoothing, non-adhesive, water-resistant, permeable, luster improving, etc.
Quality Standard
FDA of USA
Application & Benefit
Skin-care products: water-resistant, non-adhesive, lubricative, soft, protective shield for skin.
Hair-care products: maitains moisture and luster, soft and slippery.
Sweat-resistant agent/ deodorant: will not become white, soft and slippery.
Lubrication of piston(spray)


Storage & Disposal
Container must be fastened tightly after unsealing and stored at normal temperature( avoid heat or being frozen). Normal storage time can be 12 months or more.


CST 500
CST1000
CST 5000
CST 10000
CST 12500
CST 60000
viscosity (25°C)
480~520
950~1050
4800~5200
9600~10400
12000~13000
57600~62400
Specific gravity(25°C)
>0.95
>0.95
>0.95
>0.95
>0.95
>0.95
pour point(°C)
-50
-50
-50
-50
-50
-50
Flash Point(°C)
>280
>280
>280
>280
>280
>280







FUKKOL OEM Heat Sink Compound 16g

FUKKOL OEM Heat Sink Compound 16g
a metal oxide filled dielectric thermal transfer agent.
FUKKOL OEM Heat Sink Compound 16g
Description
Fukkol heat sink compound is a metal oxide filled dielectric thermal transfer agent. It is commonly used in electrical and electronic industries as a thermal transfer medium for facilitating heat dissipation between power components in electrical/electronic assemblies. And heat sink in the assembly process by filling the voids and gaps between the mated surfaces.

Characteristics

Temperature range

-40 °F(-40°C)to 400 °F(204°C)
Apperaance

White opaque

Bleed (204OC in 24 hrs)

1%MAX
NLGI Classification

1-2
Penetration (worked)

265-295
Evaporation(204OC in 24 hrs)

1%MAX
Water Resistance

Excellent
Thermal Conductivity

0.3
Specific Gravity

2.5

56# semi refined paraffin wax

Candle-making, coatings for waxed paper or cloth, shiny coating used in candy-making,chewing gum additive, etc.
Coatings for waxed paper or cloth
Food-grade paraffin wax:
Shiny coating used in -making; although edible, it is nondigestible, passing right through the body without being broken down
Coating for many kinds of hard , like
Sealant for jars, cans, and bottles
Chewing gum additive
Anti-caking agent, moisture repellent, and dustbinding coatings for
Agent for preparation of specimens for
Bullet lubricant – with other ingredients, such as olive oil and beeswax
Solid propellant for motors
Component of , used for grip on surfboards in
Component of , used on and
Friction-reducer, for use on handrails and cement ledges, commonly used in
Ink. Used as the basis for solid ink different color blocks of wax for thermal printers. The wax is melted and then sprayed on the paper producing images with a shiny surface
Microwax: , a with E905
Forensics aid: the uses paraffin wax to detect nitrates and nitrites on the hand of a shooting suspect
agents: blends of paraffin and micro waxes are used in rubber compounds to prevent of the rubber; the antiozonant waxes can be produced from synthetic waxes, FT wax, and Fischer Tropsch wax
Mechanical thermostats and actuators, as an expansion medium for activating such devices
"Potting" , which reduces microphonic feedback caused from the subtle movements of the pole pieces
for and therapy purposes
Thickening agent in many , as used by
An effective, although , in and such as
Prevents oxidation on the surface of polished steel and iron



FUKKOL OEM Heat Sink Compound 4g

FUKKOL OEM Heat Sink Compound 4g
a metal oxide filled dielectric thermal transfer agent.
FUKKOL OEM Heat Sink Compound 4g
Description
Fukkol heat sink compound is a metal oxide filled dielectric thermal transfer agent. It is commonly used in electrical and electronic industries as a thermal transfer medium for facilitating heat dissipation between power components in electrical/electronic assemblies. And heat sink in the assembly process by filling the voids and gaps between the mated surfaces.

Characteristics

Temperature range

-40 °F(-40°C)to 400 °F(204°C)
Apperaance

White opaque

Bleed (204OC in 24 hrs)

1%MAX
NLGI Classification

1-2
Penetration (worked)

265-295
Evaporation(204OC in 24 hrs)

1%MAX
Water Resistance

Excellent
Thermal Conductivity

0.3
Specific Gravity

2.5

FUKKOL OEM Heat Sink Compound Grease 16g

FUKKOL OEM Heat Sink Compound Grease 16g
a metal oxide filled dielectric thermal transfer agent.
FUKKOL OEM Heat Sink Compound Grease 16g
Description
Fukkol heat sink compound is a metal oxide filled dielectric thermal transfer agent. It is commonly used in electrical and electronic industries as a thermal transfer medium for facilitating heat dissipation between power components in electrical/electronic assemblies. And heat sink in the assembly process by filling the voids and gaps between the mated surfaces.

Characteristics

Temperature range

-40 °F(-40°C)to 400 °F(204°C)
Apperaance

White opaque

Bleed (204OC in 24 hrs)

1%MAX
NLGI Classification

1-2
Penetration (worked)

265-295
Evaporation(204OC in 24 hrs)

1%MAX
Water Resistance

Excellent
Thermal Conductivity

0.3
Specific Gravity

2.5

FUKKOL OEM Heat Sink Compound Grease 4g

FUKKOL OEM Heat Sink Compound Grease 4g
a metal oxide filled dielectric thermal transfer agent.
FUKKOL OEM Heat Sink Compound Grease 4g
Description
Fukkol heat sink compound is a metal oxide filled dielectric thermal transfer agent. It is commonly used in electrical and electronic industries as a thermal transfer medium for facilitating heat dissipation between power components in electrical/electronic assemblies. And heat sink in the assembly process by filling the voids and gaps between the mated surfaces.

Characteristics

Temperature range

-40 °F(-40°C)to 400 °F(204°C)
Apperaance

White opaque

Bleed (204OC in 24 hrs)

1%MAX
NLGI Classification

1-2
Penetration (worked)

265-295
Evaporation(204OC in 24 hrs)

1%MAX
Water Resistance

Excellent
Thermal Conductivity

0.3
Specific Gravity

2.5

FUKKOL OEM Silicone Oil 1000# Compare with Dow Corning Silicone Oil

FUKKOL OEM Silicone Oil 1000# Compare with Dow Corning Silicone Oil
non-adhesive, water-resistant, permeable, luster improving

FUKKOL OEM Silicone Oil 1000# Compare with Dow Corning Silicone Oil
Description
FUKKOL CST SERIES are non-volatile silicon oils widely used in personal care products such as two-in-one shampoo, hair tonic, sunscreen and kinds of cosmetics. They have various effects like smoothing, non-adhesive, water-resistant, permeable, luster improving, etc.
Quality Standard
FDA of USA
Application & Benefit
Skin-care products: water-resistant, non-adhesive, lubricative, soft, protective shield for skin.
Hair-care products: maitains moisture and luster, soft and slippery.
Sweat-resistant agent/ deodorant: will not become white, soft and slippery.
Lubrication of piston(spray)


Storage & Disposal
Container must be fastened tightly after unsealing and stored at normal temperature( avoid heat or being frozen). Normal storage time can be 12 months or more.


CST 500
CST1000
CST 5000
CST 10000
CST 12500
CST 60000
viscosity (25°C)
480~520
950~1050
4800~5200
9600~10400
12000~13000
57600~62400
Specific gravity(25°C)
>0.95
>0.95
>0.95
>0.95
>0.95
>0.95
pour point(°C)
-50
-50
-50
-50
-50
-50
Flash Point(°C)
>280
>280
>280
>280
>280
>280







Thursday, September 22, 2011

FUKKOL OEM Silicone Oil 1000#

15FUKKOL OEM Silicone Oil 1000#
non-adhesive, water-resistant, permeable, luster improving

FUKKOL OEM Silicone Oil 1000#
Description
FUKKOL CST SERIES are non-volatile silicon oils widely used in personal care products such as two-in-one shampoo, hair tonic, sunscreen and kinds of cosmetics. They have various effects like smoothing, non-adhesive, water-resistant, permeable, luster improving, etc.
Quality Standard
FDA of USA
Application & Benefit
Skin-care products: water-resistant, non-adhesive, lubricative, soft, protective shield for skin.
Hair-care products: maitains moisture and luster, soft and slippery.
Sweat-resistant agent/ deodorant: will not become white, soft and slippery.
Lubrication of piston(spray)


Storage & Disposal
Container must be fastened tightly after unsealing and stored at normal temperature( avoid heat or being frozen). Normal storage time can be 12 months or more.


CST 500
CST1000
CST 5000
CST 10000
CST 12500
CST 60000
viscosity (25°C)
480~520
950~1050
4800~5200
9600~10400
12000~13000
57600~62400
Specific gravity(25°C)
>0.95
>0.95
>0.95
>0.95
>0.95
>0.95
pour point(°C)
-50
-50
-50
-50
-50
-50
Flash Point(°C)
>280
>280
>280
>280
>280
>280







FUKKOL OEM Silicone Oil 1000000#

15FUKKOL OEM Silicone Oil 1000000#
non-adhesive, water-resistant, permeable, luster improving

FUKKOL OEM Silicone Oil 1000000#
Description
FUKKOL CST SERIES are non-volatile silicon oils widely used in personal care products such as two-in-one shampoo, hair tonic, sunscreen and kinds of cosmetics. They have various effects like smoothing, non-adhesive, water-resistant, permeable, luster improving, etc.
Quality Standard
FDA of USA
Application & Benefit
Skin-care products: water-resistant, non-adhesive, lubricative, soft, protective shield for skin.
Hair-care products: maitains moisture and luster, soft and slippery.
Sweat-resistant agent/ deodorant: will not become white, soft and slippery.
Lubrication of piston(spray)


Storage & Disposal
Container must be fastened tightly after unsealing and stored at normal temperature( avoid heat or being frozen). Normal storage time can be 12 months or more.


CST 500
CST1000
CST 5000
CST 10000
CST 12500
CST 60000
viscosity (25°C)
480~520
950~1050
4800~5200
9600~10400
12000~13000
57600~62400
Specific gravity(25°C)
>0.95
>0.95
>0.95
>0.95
>0.95
>0.95
pour point(°C)
-50
-50
-50
-50
-50
-50
Flash Point(°C)
>280
>280
>280
>280
>280
>280







FUKKOL OEM Silicone Oil 1000000#

FUKKOL OEM Silicone Oil 1000000#
non-adhesive, water-resistant, permeable, luster improving

FUKKOL OEM Silicone Oil 1000000#
Description
FUKKOL CST SERIES are non-volatile silicon oils widely used in personal care products such as two-in-one shampoo, hair tonic, sunscreen and kinds of cosmetics. They have various effects like smoothing, non-adhesive, water-resistant, permeable, luster improving, etc.
Quality Standard
FDA of USA
Application & Benefit
Skin-care products: water-resistant, non-adhesive, lubricative, soft, protective shield for skin.
Hair-care products: maitains moisture and luster, soft and slippery.
Sweat-resistant agent/ deodorant: will not become white, soft and slippery.
Lubrication of piston(spray)


Storage & Disposal
Container must be fastened tightly after unsealing and stored at normal temperature( avoid heat or being frozen). Normal storage time can be 12 months or more.


CST 500
CST1000
CST 5000
CST 10000
CST 12500
CST 60000
viscosity (25°C)
480~520
950~1050
4800~5200
9600~10400
12000~13000
57600~62400
Specific gravity(25°C)
>0.95
>0.95
>0.95
>0.95
>0.95
>0.95
pour point(°C)
-50
-50
-50
-50
-50
-50
Flash Point(°C)
>280
>280
>280
>280
>280
>280







FUKKOL OEM Silicone Oil 300000#

15FUKKOL OEM Silicone Oil 300000#
non-adhesive, water-resistant, permeable, luster improving

FUKKOL OEM Silicone Oil 300000#
Description
FUKKOL CST SERIES are non-volatile silicon oils widely used in personal care products such as two-in-one shampoo, hair tonic, sunscreen and kinds of cosmetics. They have various effects like smoothing, non-adhesive, water-resistant, permeable, luster improving, etc.
Quality Standard
FDA of USA
Application & Benefit
Skin-care products: water-resistant, non-adhesive, lubricative, soft, protective shield for skin.
Hair-care products: maitains moisture and luster, soft and slippery.
Sweat-resistant agent/ deodorant: will not become white, soft and slippery.
Lubrication of piston(spray)


Storage & Disposal
Container must be fastened tightly after unsealing and stored at normal temperature( avoid heat or being frozen). Normal storage time can be 12 months or more.


CST 500
CST1000
CST 5000
CST 10000
CST 12500
CST 60000
viscosity (25°C)
480~520
950~1050
4800~5200
9600~10400
12000~13000
57600~62400
Specific gravity(25°C)
>0.95
>0.95
>0.95
>0.95
>0.95
>0.95
pour point(°C)
-50
-50
-50
-50
-50
-50
Flash Point(°C)
>280
>280
>280
>280
>280
>280







FUKKOL OEM Silicone Oil 50#

15FUKKOL OEM Silicone Oil 50#
non-adhesive, water-resistant, permeable, luster improving

FUKKOL OEM Silicone Oil 50#
Description
FUKKOL CST SERIES are non-volatile silicon oils widely used in personal care products such as two-in-one shampoo, hair tonic, sunscreen and kinds of cosmetics. They have various effects like smoothing, non-adhesive, water-resistant, permeable, luster improving, etc.
Quality Standard
FDA of USA
Application & Benefit
Skin-care products: water-resistant, non-adhesive, lubricative, soft, protective shield for skin.
Hair-care products: maitains moisture and luster, soft and slippery.
Sweat-resistant agent/ deodorant: will not become white, soft and slippery.
Lubrication of piston(spray)


Storage & Disposal
Container must be fastened tightly after unsealing and stored at normal temperature( avoid heat or being frozen). Normal storage time can be 12 months or more.


CST 500
CST1000
CST 5000
CST 10000
CST 12500
CST 60000
viscosity (25°C)
480~520
950~1050
4800~5200
9600~10400
12000~13000
57600~62400
Specific gravity(25°C)
>0.95
>0.95
>0.95
>0.95
>0.95
>0.95
pour point(°C)
-50
-50
-50
-50
-50
-50
Flash Point(°C)
>280
>280
>280
>280
>280
>280







FUKKOL OEM Silicone Oil 500#

15FUKKOL OEM Silicone Oil 500#
non-adhesive, water-resistant, permeable, luster improving

FUKKOL OEM Silicone Oil 500#
Description
FUKKOL CST SERIES are non-volatile silicon oils widely used in personal care products such as two-in-one shampoo, hair tonic, sunscreen and kinds of cosmetics. They have various effects like smoothing, non-adhesive, water-resistant, permeable, luster improving, etc.
Quality Standard
FDA of USA
Application & Benefit
Skin-care products: water-resistant, non-adhesive, lubricative, soft, protective shield for skin.
Hair-care products: maitains moisture and luster, soft and slippery.
Sweat-resistant agent/ deodorant: will not become white, soft and slippery.
Lubrication of piston(spray)


Storage & Disposal
Container must be fastened tightly after unsealing and stored at normal temperature( avoid heat or being frozen). Normal storage time can be 12 months or more.


CST 500
CST1000
CST 5000
CST 10000
CST 12500
CST 60000
viscosity (25°C)
480~520
950~1050
4800~5200
9600~10400
12000~13000
57600~62400
Specific gravity(25°C)
>0.95
>0.95
>0.95
>0.95
>0.95
>0.95
pour point(°C)
-50
-50
-50
-50
-50
-50
Flash Point(°C)
>280
>280
>280
>280
>280
>280







56#HOT !Semi Refined Paraffin Wax

1.kunlun brand
2.quality index:prior class
3.Application:candles making\rubber industry\explosives industry
4.M.P:56-58
Test Items
Standard
Test Method
Melting point
56-58
GB/T 2539
Oil Content %(m/m) ≤
0.5
GB/T 3554
Color saybolt ≥
+28
GB/T 3555
Light Stability # ≤
4
SH/T0404
Penetration (25°C)1/10mm ≤
18
GB/T 4985
We supply Kunlun brand semi refined and fully refined paraffin wax purchased directly from PetroChina, with melting points of 54/56, 56/58, 58/60, 60/62, 62/64, 64/66 and others. Our factory produces industrial grade semi-refined paraffin wax. The annual trade volume amounts 20,000MT.
Management Certification: ISO 9001:2000

FUKKOL OEM Silicone Oil 500000#

15FUKKOL OEM Silicone Oil 500000#
non-adhesive, water-resistant, permeable, luster improving

FUKKOL OEM Silicone Oil 500000#
Description
FUKKOL CST SERIES are non-volatile silicon oils widely used in personal care products such as two-in-one shampoo, hair tonic, sunscreen and kinds of cosmetics. They have various effects like smoothing, non-adhesive, water-resistant, permeable, luster improving, etc.
Quality Standard
FDA of USA
Application & Benefit
Skin-care products: water-resistant, non-adhesive, lubricative, soft, protective shield for skin.
Hair-care products: maitains moisture and luster, soft and slippery.
Sweat-resistant agent/ deodorant: will not become white, soft and slippery.
Lubrication of piston(spray)


Storage & Disposal
Container must be fastened tightly after unsealing and stored at normal temperature( avoid heat or being frozen). Normal storage time can be 12 months or more.


CST 500
CST1000
CST 5000
CST 10000
CST 12500
CST 60000
viscosity (25°C)
480~520
950~1050
4800~5200
9600~10400
12000~13000
57600~62400
Specific gravity(25°C)
>0.95
>0.95
>0.95
>0.95
>0.95
>0.95
pour point(°C)
-50
-50
-50
-50
-50
-50
Flash Point(°C)
>280
>280
>280
>280
>280
>280







FUKKOL OEM Silicone Oil

FUKKOL OEM Silicone Oil
non-adhesive, water-resistant, permeable, luster improving

FUKKOL OEM Silicone Oil
Description
FUKKOL CST SERIES are non-volatile silicon oils widely used in personal care products such as two-in-one shampoo, hair tonic, sunscreen and kinds of cosmetics. They have various effects like smoothing, non-adhesive, water-resistant, permeable, luster improving, etc.
Quality Standard
FDA of USA
Application & Benefit
Skin-care products: water-resistant, non-adhesive, lubricative, soft, protective shield for skin.
Hair-care products: maitains moisture and luster, soft and slippery.
Sweat-resistant agent/ deodorant: will not become white, soft and slippery.
Lubrication of piston(spray)


Storage & Disposal
Container must be fastened tightly after unsealing and stored at normal temperature( avoid heat or being frozen). Normal storage time can be 12 months or more.


CST 500
CST1000
CST 5000
CST 10000
CST 12500
CST 60000
viscosity (25°C)
480~520
950~1050
4800~5200
9600~10400
12000~13000
57600~62400
Specific gravity(25°C)
>0.95
>0.95
>0.95
>0.95
>0.95
>0.95
pour point(°C)
-50
-50
-50
-50
-50
-50
Flash Point(°C)
>280
>280
>280
>280
>280
>280







FUKKOL OEM Sticker Cleaner Glue

FUKKOL OEM Sticker Cleaner Glue
10 minutes of soaking
Prolong the soaking time
FUKKOL OEM Sticker Cleaner Glue
10 minutes of soaking
Prolong the soaking time

Applications:
Fukkol Sticker Remover CPS is designed for removing problem of stickers. It leaves no sticky residue, harms no work-piece and affects no any work processing.


Directions:
Apply evenly the product onto the sticker. After 10 minutes of soaking, apply again and then wipe it with a cloth. Prolong the soaking time and apply more product if necessary.

Cautions:
1, Do not apply to food.
2, Long time skin contact may cause dry skin.
3, Use it in ventilated place.
4, Keep away from source of ignition.

Typical physical properties

Appearance
Colorless Transparent Liquid
CST at 40°C
1.0~2.0
Density g/cm³
0.77~0.81
Flash point °C
>60



FUKKOL OEM Sticker Cleaner

FUKKOL OEM Sticker Cleaner
10 minutes of soaking
Prolong the soaking time
FUKKOL OEM Sticker Cleaner
10 minutes of soaking
Prolong the soaking time

Applications:
Fukkol Sticker Remover CPS is designed for removing problem of stickers. It leaves no sticky residue, harms no work-piece and affects no any work processing.


Directions:
Apply evenly the product onto the sticker. After 10 minutes of soaking, apply again and then wipe it with a cloth. Prolong the soaking time and apply more product if necessary.

Cautions:
1, Do not apply to food.
2, Long time skin contact may cause dry skin.
3, Use it in ventilated place.
4, Keep away from source of ignition.

Typical physical properties

Appearance
Colorless Transparent Liquid
CST at 40°C
1.0~2.0
Density g/cm³
0.77~0.81
Flash point °C
>60



FUKKOL OEM Sticker Remover Glue

FUKKOL OEM Sticker Remover Glue
10 minutes of soaking
Prolong the soaking time
FUKKOL OEM Sticker Remover Glue
10 minutes of soaking
Prolong the soaking time

Applications:
Fukkol Sticker Remover CPS is designed for removing problem of stickers. It leaves no sticky residue, harms no work-piece and affects no any work processing.


Directions:
Apply evenly the product onto the sticker. After 10 minutes of soaking, apply again and then wipe it with a cloth. Prolong the soaking time and apply more product if necessary.

Cautions:
1, Do not apply to food.
2, Long time skin contact may cause dry skin.
3, Use it in ventilated place.
4, Keep away from source of ignition.

Typical physical properties

Appearance
Colorless Transparent Liquid
CST at 40°C
1.0~2.0
Density g/cm³
0.77~0.81
Flash point °C
>60



FUKKOL OEM Sticker Remover

FUKKOL OEM Sticker Remover
10 minutes of soaking
Prolong the soaking time
FUKKOL OEM Sticker Remover
10 minutes of soaking
Prolong the soaking time

Applications:
Fukkol Sticker Remover CPS is designed for removing problem of stickers. It leaves no sticky residue, harms no work-piece and affects no any work processing.


Directions:
Apply evenly the product onto the sticker. After 10 minutes of soaking, apply again and then wipe it with a cloth. Prolong the soaking time and apply more product if necessary.

Cautions:
1, Do not apply to food.
2, Long time skin contact may cause dry skin.
3, Use it in ventilated place.
4, Keep away from source of ignition.

Typical physical properties

Appearance
Colorless Transparent Liquid
CST at 40°C
1.0~2.0
Density g/cm³
0.77~0.81
Flash point °C
>60