FUKKOL Gasket Paint Remover Spray
Excellent Paint, Varnish and Graffiti Remover. Aggressive cleaner works efficiently
FUKKOL Gasket Paint Remover Spray
Excellent Paint, Varnish and Graffiti Remover. Aggressive cleaner works efficiently
Description:
FUKKOL Gasket Remover is a solvent-based, high strength cleaner that helps remove baked-on fiber gaskets, gasket adhesives and sealants. It quickly dissolves and aids in the removal of paints, lacquers and varnishes. Gasket Remover contains no methylene chloride.
Applications
Recommended for the effective removal of conventional and formed-in-place gaskets on motors, pumps and flanges. Aids in dissolution and removal of paints, lacquers and varnishes. Removes graffiti from metal and stone.
Features & Benefits:
*Works Quickly. Softens and eases removal of gaskets, gasket cements and sealants.
*Loosens Carbon Deposits.
*Protects Equipment Surfaces. Reduces the need for excessive scraping.
*Excellent Paint, Varnish and Graffiti Remover. Aggressive cleaner works efficiently.
*Contains No Methylene Chloride
Typical physical properties
Flash Point
56° F (TCC)
Solubility
water
Odor
Specific Gravity
0.7419
Appearance
Propellant
LPG
Vapor Density
>air
VOC Content
352.4 g/L
Saturday, October 1, 2011
FUKKOL Gasket Paint Remover
FUKKOL Gasket Paint Remover
Excellent Paint, Varnish and Graffiti Remover. Aggressive cleaner works efficiently
FUKKOL Gasket Paint Remover
Excellent Paint, Varnish and Graffiti Remover. Aggressive cleaner works efficiently
Description:
FUKKOL Gasket Remover is a solvent-based, high strength cleaner that helps remove baked-on fiber gaskets, gasket adhesives and sealants. It quickly dissolves and aids in the removal of paints, lacquers and varnishes. Gasket Remover contains no methylene chloride.
Applications
Recommended for the effective removal of conventional and formed-in-place gaskets on motors, pumps and flanges. Aids in dissolution and removal of paints, lacquers and varnishes. Removes graffiti from metal and stone.
Features & Benefits:
*Works Quickly. Softens and eases removal of gaskets, gasket cements and sealants.
*Loosens Carbon Deposits.
*Protects Equipment Surfaces. Reduces the need for excessive scraping.
*Excellent Paint, Varnish and Graffiti Remover. Aggressive cleaner works efficiently.
*Contains No Methylene Chloride
Typical physical properties
Flash Point
56° F (TCC)
Solubility
water
Odor
Specific Gravity
0.7419
Appearance
Propellant
LPG
Vapor Density
>air
VOC Content
352.4 g/L
Excellent Paint, Varnish and Graffiti Remover. Aggressive cleaner works efficiently
FUKKOL Gasket Paint Remover
Excellent Paint, Varnish and Graffiti Remover. Aggressive cleaner works efficiently
Description:
FUKKOL Gasket Remover is a solvent-based, high strength cleaner that helps remove baked-on fiber gaskets, gasket adhesives and sealants. It quickly dissolves and aids in the removal of paints, lacquers and varnishes. Gasket Remover contains no methylene chloride.
Applications
Recommended for the effective removal of conventional and formed-in-place gaskets on motors, pumps and flanges. Aids in dissolution and removal of paints, lacquers and varnishes. Removes graffiti from metal and stone.
Features & Benefits:
*Works Quickly. Softens and eases removal of gaskets, gasket cements and sealants.
*Loosens Carbon Deposits.
*Protects Equipment Surfaces. Reduces the need for excessive scraping.
*Excellent Paint, Varnish and Graffiti Remover. Aggressive cleaner works efficiently.
*Contains No Methylene Chloride
Typical physical properties
Flash Point
56° F (TCC)
Solubility
water
Odor
Specific Gravity
0.7419
Appearance
Propellant
LPG
Vapor Density
>air
VOC Content
352.4 g/L
450ml Spray Lubricant & Penetrating Oil
1.Spray Lubricant & Penetraing oil
2.Prevent rust and corrosion
3.Drive out moisture,loosen rusted parts
4.450ML
5.24 PC/CTN
Spray lubricant and Penetrating Oil:
1) Excellent quality as original U.S.A. brands and reasonable price of Spray Lubricant and Penetrating Oil is your best choice.
2) Prevents rust and corrosion, increase lubrication, drives out moisture, loosens rusted parts, cleans and protects, stops squeaks.
DESCRIPTION
Spray Lubricant&Penetrating Oil
Material Can
Iron Can
PART NO.
PE-80
GROSS WEIGHT
450ML
NET WEIGHT
278.5g
PCS/CTN
24
Carton Size
D41.5*W27.5*H20.5(cm)
G.W./CTN
9.6
CBM/CTN
0.023
CTN/20'
1217
CTN/40'
2783
2.Prevent rust and corrosion
3.Drive out moisture,loosen rusted parts
4.450ML
5.24 PC/CTN
Spray lubricant and Penetrating Oil:
1) Excellent quality as original U.S.A. brands and reasonable price of Spray Lubricant and Penetrating Oil is your best choice.
2) Prevents rust and corrosion, increase lubrication, drives out moisture, loosens rusted parts, cleans and protects, stops squeaks.
DESCRIPTION
Spray Lubricant&Penetrating Oil
Material Can
Iron Can
PART NO.
PE-80
GROSS WEIGHT
450ML
NET WEIGHT
278.5g
PCS/CTN
24
Carton Size
D41.5*W27.5*H20.5(cm)
G.W./CTN
9.6
CBM/CTN
0.023
CTN/20'
1217
CTN/40'
2783
FUKKOL Gasket Remover Aerosol
FUKKOL Gasket Remover Aerosol
Excellent Paint, Varnish and Graffiti Remover. Aggressive cleaner works efficiently
FUKKOL Gasket Remover Aerosol
Excellent Paint, Varnish and Graffiti Remover. Aggressive cleaner works efficiently
Description:
FUKKOL Gasket Remover is a solvent-based, high strength cleaner that helps remove baked-on fiber gaskets, gasket adhesives and sealants. It quickly dissolves and aids in the removal of paints, lacquers and varnishes. Gasket Remover contains no methylene chloride.
Applications
Recommended for the effective removal of conventional and formed-in-place gaskets on motors, pumps and flanges. Aids in dissolution and removal of paints, lacquers and varnishes. Removes graffiti from metal and stone.
Features & Benefits:
*Works Quickly. Softens and eases removal of gaskets, gasket cements and sealants.
*Loosens Carbon Deposits.
*Protects Equipment Surfaces. Reduces the need for excessive scraping.
*Excellent Paint, Varnish and Graffiti Remover. Aggressive cleaner works efficiently.
*Contains No Methylene Chloride
Typical physical properties
Flash Point
56° F (TCC)
Solubility
water
Odor
Specific Gravity
0.7419
Appearance
Propellant
LPG
Vapor Density
>air
VOC Content
352.4 g/L
Excellent Paint, Varnish and Graffiti Remover. Aggressive cleaner works efficiently
FUKKOL Gasket Remover Aerosol
Excellent Paint, Varnish and Graffiti Remover. Aggressive cleaner works efficiently
Description:
FUKKOL Gasket Remover is a solvent-based, high strength cleaner that helps remove baked-on fiber gaskets, gasket adhesives and sealants. It quickly dissolves and aids in the removal of paints, lacquers and varnishes. Gasket Remover contains no methylene chloride.
Applications
Recommended for the effective removal of conventional and formed-in-place gaskets on motors, pumps and flanges. Aids in dissolution and removal of paints, lacquers and varnishes. Removes graffiti from metal and stone.
Features & Benefits:
*Works Quickly. Softens and eases removal of gaskets, gasket cements and sealants.
*Loosens Carbon Deposits.
*Protects Equipment Surfaces. Reduces the need for excessive scraping.
*Excellent Paint, Varnish and Graffiti Remover. Aggressive cleaner works efficiently.
*Contains No Methylene Chloride
Typical physical properties
Flash Point
56° F (TCC)
Solubility
water
Odor
Specific Gravity
0.7419
Appearance
Propellant
LPG
Vapor Density
>air
VOC Content
352.4 g/L
FUKKOL Gasket Remover Spray
FUKKOL Gasket Remover Spray
Excellent Paint, Varnish and Graffiti Remover. Aggressive cleaner works efficiently
FUKKOL Gasket Remover Spray
Excellent Paint, Varnish and Graffiti Remover. Aggressive cleaner works efficiently
Description:
FUKKOL Gasket Remover is a solvent-based, high strength cleaner that helps remove baked-on fiber gaskets, gasket adhesives and sealants. It quickly dissolves and aids in the removal of paints, lacquers and varnishes. Gasket Remover contains no methylene chloride.
Applications
Recommended for the effective removal of conventional and formed-in-place gaskets on motors, pumps and flanges. Aids in dissolution and removal of paints, lacquers and varnishes. Removes graffiti from metal and stone.
Features & Benefits:
*Works Quickly. Softens and eases removal of gaskets, gasket cements and sealants.
*Loosens Carbon Deposits.
*Protects Equipment Surfaces. Reduces the need for excessive scraping.
*Excellent Paint, Varnish and Graffiti Remover. Aggressive cleaner works efficiently.
*Contains No Methylene Chloride
Typical physical properties
Flash Point
56° F (TCC)
Solubility
water
Odor
Specific Gravity
0.7419
Appearance
Propellant
LPG
Vapor Density
>air
VOC Content
352.4 g/L
Excellent Paint, Varnish and Graffiti Remover. Aggressive cleaner works efficiently
FUKKOL Gasket Remover Spray
Excellent Paint, Varnish and Graffiti Remover. Aggressive cleaner works efficiently
Description:
FUKKOL Gasket Remover is a solvent-based, high strength cleaner that helps remove baked-on fiber gaskets, gasket adhesives and sealants. It quickly dissolves and aids in the removal of paints, lacquers and varnishes. Gasket Remover contains no methylene chloride.
Applications
Recommended for the effective removal of conventional and formed-in-place gaskets on motors, pumps and flanges. Aids in dissolution and removal of paints, lacquers and varnishes. Removes graffiti from metal and stone.
Features & Benefits:
*Works Quickly. Softens and eases removal of gaskets, gasket cements and sealants.
*Loosens Carbon Deposits.
*Protects Equipment Surfaces. Reduces the need for excessive scraping.
*Excellent Paint, Varnish and Graffiti Remover. Aggressive cleaner works efficiently.
*Contains No Methylene Chloride
Typical physical properties
Flash Point
56° F (TCC)
Solubility
water
Odor
Specific Gravity
0.7419
Appearance
Propellant
LPG
Vapor Density
>air
VOC Content
352.4 g/L
FUKKOL Gasket Remover/ Paint Remover
FUKKOL Gasket Remover/ Paint Remover
Excellent Paint, Varnish and Graffiti Remover. Aggressive cleaner works efficiently
FUKKOL Gasket Remover/ Paint Remover
Excellent Paint, Varnish and Graffiti Remover. Aggressive cleaner works efficiently
Description:
FUKKOL Gasket Remover is a solvent-based, high strength cleaner that helps remove baked-on fiber gaskets, gasket adhesives and sealants. It quickly dissolves and aids in the removal of paints, lacquers and varnishes. Gasket Remover contains no methylene chloride.
Applications
Recommended for the effective removal of conventional and formed-in-place gaskets on motors, pumps and flanges. Aids in dissolution and removal of paints, lacquers and varnishes. Removes graffiti from metal and stone.
Features & Benefits:
*Works Quickly. Softens and eases removal of gaskets, gasket cements and sealants.
*Loosens Carbon Deposits.
*Protects Equipment Surfaces. Reduces the need for excessive scraping.
*Excellent Paint, Varnish and Graffiti Remover. Aggressive cleaner works efficiently.
*Contains No Methylene Chloride
Typical physical properties
Flash Point
56° F (TCC)
Solubility
water
Odor
Specific Gravity
0.7419
Appearance
Propellant
LPG
Vapor Density
>air
VOC Content
352.4 g/L
Excellent Paint, Varnish and Graffiti Remover. Aggressive cleaner works efficiently
FUKKOL Gasket Remover/ Paint Remover
Excellent Paint, Varnish and Graffiti Remover. Aggressive cleaner works efficiently
Description:
FUKKOL Gasket Remover is a solvent-based, high strength cleaner that helps remove baked-on fiber gaskets, gasket adhesives and sealants. It quickly dissolves and aids in the removal of paints, lacquers and varnishes. Gasket Remover contains no methylene chloride.
Applications
Recommended for the effective removal of conventional and formed-in-place gaskets on motors, pumps and flanges. Aids in dissolution and removal of paints, lacquers and varnishes. Removes graffiti from metal and stone.
Features & Benefits:
*Works Quickly. Softens and eases removal of gaskets, gasket cements and sealants.
*Loosens Carbon Deposits.
*Protects Equipment Surfaces. Reduces the need for excessive scraping.
*Excellent Paint, Varnish and Graffiti Remover. Aggressive cleaner works efficiently.
*Contains No Methylene Chloride
Typical physical properties
Flash Point
56° F (TCC)
Solubility
water
Odor
Specific Gravity
0.7419
Appearance
Propellant
LPG
Vapor Density
>air
VOC Content
352.4 g/L
FUKKOL Gasket Remover
FUKKOL Gasket Remover
Excellent Paint, Varnish and Graffiti Remover. Aggressive cleaner works efficiently
FUKKOL Gasket Remover
Excellent Paint, Varnish and Graffiti Remover. Aggressive cleaner works efficiently
Description:
FUKKOL Gasket Remover is a solvent-based, high strength cleaner that helps remove baked-on fiber gaskets, gasket adhesives and sealants. It quickly dissolves and aids in the removal of paints, lacquers and varnishes. Gasket Remover contains no methylene chloride.
Applications
Recommended for the effective removal of conventional and formed-in-place gaskets on motors, pumps and flanges. Aids in dissolution and removal of paints, lacquers and varnishes. Removes graffiti from metal and stone.
Features & Benefits:
*Works Quickly. Softens and eases removal of gaskets, gasket cements and sealants.
*Loosens Carbon Deposits.
*Protects Equipment Surfaces. Reduces the need for excessive scraping.
*Excellent Paint, Varnish and Graffiti Remover. Aggressive cleaner works efficiently.
*Contains No Methylene Chloride
Typical physical properties
Flash Point
56° F (TCC)
Solubility
water
Odor
Specific Gravity
0.7419
Appearance
Propellant
LPG
Vapor Density
>air
VOC Content
352.4 g/L
Excellent Paint, Varnish and Graffiti Remover. Aggressive cleaner works efficiently
FUKKOL Gasket Remover
Excellent Paint, Varnish and Graffiti Remover. Aggressive cleaner works efficiently
Description:
FUKKOL Gasket Remover is a solvent-based, high strength cleaner that helps remove baked-on fiber gaskets, gasket adhesives and sealants. It quickly dissolves and aids in the removal of paints, lacquers and varnishes. Gasket Remover contains no methylene chloride.
Applications
Recommended for the effective removal of conventional and formed-in-place gaskets on motors, pumps and flanges. Aids in dissolution and removal of paints, lacquers and varnishes. Removes graffiti from metal and stone.
Features & Benefits:
*Works Quickly. Softens and eases removal of gaskets, gasket cements and sealants.
*Loosens Carbon Deposits.
*Protects Equipment Surfaces. Reduces the need for excessive scraping.
*Excellent Paint, Varnish and Graffiti Remover. Aggressive cleaner works efficiently.
*Contains No Methylene Chloride
Typical physical properties
Flash Point
56° F (TCC)
Solubility
water
Odor
Specific Gravity
0.7419
Appearance
Propellant
LPG
Vapor Density
>air
VOC Content
352.4 g/L
FUKKOL Gasket-Off / Paint-Off/ Remover
FUKKOL Gasket-Off / Paint-Off/ Remover
Excellent Paint, Varnish and Graffiti Remover. Aggressive cleaner works efficiently
FUKKOL Gasket-Off / Paint-Off/ Remover
Excellent Paint, Varnish and Graffiti Remover. Aggressive cleaner works efficiently
Description:
FUKKOL Gasket Remover is a solvent-based, high strength cleaner that helps remove baked-on fiber gaskets, gasket adhesives and sealants. It quickly dissolves and aids in the removal of paints, lacquers and varnishes. Gasket Remover contains no methylene chloride.
Applications
Recommended for the effective removal of conventional and formed-in-place gaskets on motors, pumps and flanges. Aids in dissolution and removal of paints, lacquers and varnishes. Removes graffiti from metal and stone.
Features & Benefits:
*Works Quickly. Softens and eases removal of gaskets, gasket cements and sealants.
*Loosens Carbon Deposits.
*Protects Equipment Surfaces. Reduces the need for excessive scraping.
*Excellent Paint, Varnish and Graffiti Remover. Aggressive cleaner works efficiently.
*Contains No Methylene Chloride
Typical physical properties
Flash Point
56° F (TCC)
Solubility
water
Odor
Specific Gravity
0.7419
Appearance
Propellant
LPG
Vapor Density
>air
VOC Content
352.4 g/L
Excellent Paint, Varnish and Graffiti Remover. Aggressive cleaner works efficiently
FUKKOL Gasket-Off / Paint-Off/ Remover
Excellent Paint, Varnish and Graffiti Remover. Aggressive cleaner works efficiently
Description:
FUKKOL Gasket Remover is a solvent-based, high strength cleaner that helps remove baked-on fiber gaskets, gasket adhesives and sealants. It quickly dissolves and aids in the removal of paints, lacquers and varnishes. Gasket Remover contains no methylene chloride.
Applications
Recommended for the effective removal of conventional and formed-in-place gaskets on motors, pumps and flanges. Aids in dissolution and removal of paints, lacquers and varnishes. Removes graffiti from metal and stone.
Features & Benefits:
*Works Quickly. Softens and eases removal of gaskets, gasket cements and sealants.
*Loosens Carbon Deposits.
*Protects Equipment Surfaces. Reduces the need for excessive scraping.
*Excellent Paint, Varnish and Graffiti Remover. Aggressive cleaner works efficiently.
*Contains No Methylene Chloride
Typical physical properties
Flash Point
56° F (TCC)
Solubility
water
Odor
Specific Gravity
0.7419
Appearance
Propellant
LPG
Vapor Density
>air
VOC Content
352.4 g/L
FUKKOL Gear Anti- Rust Oil Spray
FUKKOL Gear Anti- Rust Oil Spray
Provide corrosion protection more than 5 years indoor, 3year outdoor
FUKKOL Gear Anti- Rust Oil Spray
DESCRIPTION:
Fukkol Rustking L type rust-proof agent makes a brown protective film shows where the product has been applied. Rustking L type provides long term lubrication and protection against rust. The rust-proof film will not melt at 50°C~60°C. The rust-proof duration will be more than five years indoor and three years in ourdoor. The product can be removed by a mild solvent or simply by putting a mould back in service and running a few parts.
BENEFITS
Contains a brown dye to identify treated surfaces
-Simply removed by putting mould back in service
-Provides complete protection against finger-print
-Provides corrosion protection for more than 5 years (indoor)
--Provides corrosion protection for more than 3 years (ourdoor)
APPLICATION
Its brown colored ultra-thin soft film which provides long term corrosion protection to metals. Absolutely displaces water and resists moisture. Specially designed for protection of moulds, castings and dies in production or in storage. A reliable rust-proof agent for metal tools and parts, power plants and ocean-going freighters.
Provide corrosion protection more than 5 years indoor, 3year outdoor
FUKKOL Gear Anti- Rust Oil Spray
DESCRIPTION:
Fukkol Rustking L type rust-proof agent makes a brown protective film shows where the product has been applied. Rustking L type provides long term lubrication and protection against rust. The rust-proof film will not melt at 50°C~60°C. The rust-proof duration will be more than five years indoor and three years in ourdoor. The product can be removed by a mild solvent or simply by putting a mould back in service and running a few parts.
BENEFITS
Contains a brown dye to identify treated surfaces
-Simply removed by putting mould back in service
-Provides complete protection against finger-print
-Provides corrosion protection for more than 5 years (indoor)
--Provides corrosion protection for more than 3 years (ourdoor)
APPLICATION
Its brown colored ultra-thin soft film which provides long term corrosion protection to metals. Absolutely displaces water and resists moisture. Specially designed for protection of moulds, castings and dies in production or in storage. A reliable rust-proof agent for metal tools and parts, power plants and ocean-going freighters.
FUKKOL Gear Anti- Rust Spray ( long term)
FUKKOL Gear Anti- Rust Spray ( long term)
Provide corrosion protection more than 5 years indoor, 3year outdoor
FUKKOL Gear Anti- Rust Spray ( long term)
DESCRIPTION:
Fukkol Rustking L type rust-proof agent makes a brown protective film shows where the product has been applied. Rustking L type provides long term lubrication and protection against rust. The rust-proof film will not melt at 50°C~60°C. The rust-proof duration will be more than five years indoor and three years in ourdoor. The product can be removed by a mild solvent or simply by putting a mould back in service and running a few parts.
BENEFITS
Contains a brown dye to identify treated surfaces
-Simply removed by putting mould back in service
-Provides complete protection against finger-print
-Provides corrosion protection for more than 5 years (indoor)
--Provides corrosion protection for more than 3 years (ourdoor)
APPLICATION
Its brown colored ultra-thin soft film which provides long term corrosion protection to metals. Absolutely displaces water and resists moisture. Specially designed for protection of moulds, castings and dies in production or in storage. A reliable rust-proof agent for metal tools and parts, power plants and ocean-going freighters.
Provide corrosion protection more than 5 years indoor, 3year outdoor
FUKKOL Gear Anti- Rust Spray ( long term)
DESCRIPTION:
Fukkol Rustking L type rust-proof agent makes a brown protective film shows where the product has been applied. Rustking L type provides long term lubrication and protection against rust. The rust-proof film will not melt at 50°C~60°C. The rust-proof duration will be more than five years indoor and three years in ourdoor. The product can be removed by a mild solvent or simply by putting a mould back in service and running a few parts.
BENEFITS
Contains a brown dye to identify treated surfaces
-Simply removed by putting mould back in service
-Provides complete protection against finger-print
-Provides corrosion protection for more than 5 years (indoor)
--Provides corrosion protection for more than 3 years (ourdoor)
APPLICATION
Its brown colored ultra-thin soft film which provides long term corrosion protection to metals. Absolutely displaces water and resists moisture. Specially designed for protection of moulds, castings and dies in production or in storage. A reliable rust-proof agent for metal tools and parts, power plants and ocean-going freighters.
FUKKOL Gear Anti- Rust lubricant Oil Spray
FUKKOL Gear Anti- Rust lubricant Oil Spray
Provide corrosion protection more than 5 years indoor, 3year outdoor
FUKKOL Gear Anti- Rust lubricant Oil Spray
DESCRIPTION:
Fukkol Rustking L type rust-proof agent makes a brown protective film shows where the product has been applied. Rustking L type provides long term lubrication and protection against rust. The rust-proof film will not melt at 50°C~60°C. The rust-proof duration will be more than five years indoor and three years in ourdoor. The product can be removed by a mild solvent or simply by putting a mould back in service and running a few parts.
BENEFITS
Contains a brown dye to identify treated surfaces
-Simply removed by putting mould back in service
-Provides complete protection against finger-print
-Provides corrosion protection for more than 5 years (indoor)
--Provides corrosion protection for more than 3 years (ourdoor)
APPLICATION
Its brown colored ultra-thin soft film which provides long term corrosion protection to metals. Absolutely displaces water and resists moisture. Specially designed for protection of moulds, castings and dies in production or in storage. A reliable rust-proof agent for metal tools and parts, power plants and ocean-going freighters.
Provide corrosion protection more than 5 years indoor, 3year outdoor
FUKKOL Gear Anti- Rust lubricant Oil Spray
DESCRIPTION:
Fukkol Rustking L type rust-proof agent makes a brown protective film shows where the product has been applied. Rustking L type provides long term lubrication and protection against rust. The rust-proof film will not melt at 50°C~60°C. The rust-proof duration will be more than five years indoor and three years in ourdoor. The product can be removed by a mild solvent or simply by putting a mould back in service and running a few parts.
BENEFITS
Contains a brown dye to identify treated surfaces
-Simply removed by putting mould back in service
-Provides complete protection against finger-print
-Provides corrosion protection for more than 5 years (indoor)
--Provides corrosion protection for more than 3 years (ourdoor)
APPLICATION
Its brown colored ultra-thin soft film which provides long term corrosion protection to metals. Absolutely displaces water and resists moisture. Specially designed for protection of moulds, castings and dies in production or in storage. A reliable rust-proof agent for metal tools and parts, power plants and ocean-going freighters.
FUKKOL Gear Case and Machine Grease R 0,00
FUKKOL Extreme Pressure Grease
- Multi-Purpose Grease for protection from wear under heavy and shock loads
- No lead contains
FUKKOL Extreme Pressure Grease
Description
Fukkol Grease R 0,00 is semi-fluid grease containing lithium thickener, ISO 680 mineral base oil , oxidation and rust inhibitors and special tackiness additive.
Used primarily in gear cases for which grease lubrication is specified.
Applications
*Industrial enclosed gear drives *Gearboxes of stirrer drives in mixing and reacting vessels *Gear drives of tractor - drawn gang mowers *Other gear cases, subject to oil leaks, which require high viscosity lubricants *Centralized lubrication systems *Final drives and track rollers of construction and earth moving equipment *Other types of heavy-duty equipment a soft, easily pumpable, non - EP grease having a high viscosity base oil.
Usable temperature range in continuous service is -30to120°C .Maximum temperature for short term
Benefits
Prolongs equipment life: Self-sealing characteristics of the lithium-based thickener reduce or eliminate loss of lubricant, preventing accelerated wear through oil starvation .High viscosity base oil provides thick-film lubrication, even at high loads .Tacky consistency resists water wash out and contaminant ingress, minimizing wear and corrosion in wet and dirty environments.
Reduces external contamination: High base oil viscosity , tackiness characteristics and thickener self-sealing action reduce leakage to the environment or ,in the case of processing vessels, reduce contamination of processed products.
Minimizes lubricant consumption: Effective oxidation inhibitors and the non-hardening characteristics of the lithium-based thickener reduce viscosity increase and maximize lubricant service life. Leakage reducing characteristics minimize top-up during service.
- Multi-Purpose Grease for protection from wear under heavy and shock loads
- No lead contains
FUKKOL Extreme Pressure Grease
Description
Fukkol Grease R 0,00 is semi-fluid grease containing lithium thickener, ISO 680 mineral base oil , oxidation and rust inhibitors and special tackiness additive.
Used primarily in gear cases for which grease lubrication is specified.
Applications
*Industrial enclosed gear drives *Gearboxes of stirrer drives in mixing and reacting vessels *Gear drives of tractor - drawn gang mowers *Other gear cases, subject to oil leaks, which require high viscosity lubricants *Centralized lubrication systems *Final drives and track rollers of construction and earth moving equipment *Other types of heavy-duty equipment a soft, easily pumpable, non - EP grease having a high viscosity base oil.
Usable temperature range in continuous service is -30to120°C .Maximum temperature for short term
Benefits
Prolongs equipment life: Self-sealing characteristics of the lithium-based thickener reduce or eliminate loss of lubricant, preventing accelerated wear through oil starvation .High viscosity base oil provides thick-film lubrication, even at high loads .Tacky consistency resists water wash out and contaminant ingress, minimizing wear and corrosion in wet and dirty environments.
Reduces external contamination: High base oil viscosity , tackiness characteristics and thickener self-sealing action reduce leakage to the environment or ,in the case of processing vessels, reduce contamination of processed products.
Minimizes lubricant consumption: Effective oxidation inhibitors and the non-hardening characteristics of the lithium-based thickener reduce viscosity increase and maximize lubricant service life. Leakage reducing characteristics minimize top-up during service.
FUKKOL Gear Rust Prevention Lube Spray
FUKKOL Gear Rust Prevention Lube Spray
Provide corrosion protection more than 5 years indoor, 3year outdoor
FUKKOL Gear Rust Prevention Lube Spray
DESCRIPTION:
Fukkol Rustking L type rust-proof agent makes a brown protective film shows where the product has been applied. Rustking L type provides long term lubrication and protection against rust. The rust-proof film will not melt at 50°C~60°C. The rust-proof duration will be more than five years indoor and three years in ourdoor. The product can be removed by a mild solvent or simply by putting a mould back in service and running a few parts.
BENEFITS
Contains a brown dye to identify treated surfaces
-Simply removed by putting mould back in service
-Provides complete protection against finger-print
-Provides corrosion protection for more than 5 years (indoor)
--Provides corrosion protection for more than 3 years (ourdoor)
APPLICATION
Its brown colored ultra-thin soft film which provides long term corrosion protection to metals. Absolutely displaces water and resists moisture. Specially designed for protection of moulds, castings and dies in production or in storage. A reliable rust-proof agent for metal tools and parts, power plants and ocean-going freighters.
Provide corrosion protection more than 5 years indoor, 3year outdoor
FUKKOL Gear Rust Prevention Lube Spray
DESCRIPTION:
Fukkol Rustking L type rust-proof agent makes a brown protective film shows where the product has been applied. Rustking L type provides long term lubrication and protection against rust. The rust-proof film will not melt at 50°C~60°C. The rust-proof duration will be more than five years indoor and three years in ourdoor. The product can be removed by a mild solvent or simply by putting a mould back in service and running a few parts.
BENEFITS
Contains a brown dye to identify treated surfaces
-Simply removed by putting mould back in service
-Provides complete protection against finger-print
-Provides corrosion protection for more than 5 years (indoor)
--Provides corrosion protection for more than 3 years (ourdoor)
APPLICATION
Its brown colored ultra-thin soft film which provides long term corrosion protection to metals. Absolutely displaces water and resists moisture. Specially designed for protection of moulds, castings and dies in production or in storage. A reliable rust-proof agent for metal tools and parts, power plants and ocean-going freighters.
46# anti-wear hydraulic lubricant
46# anti-wear hydraulic lubricant
1.Outstanding anti-wear performance
2.Good oxidation stability
3.Competive price
Typical Properties:
Items
46# anti wear hydrualic oil
Kinematic Viscosity mm2/s (at 40°C)
41.4~50.6
Viscosity Index
95 Min
Flash Point (°C):
180 Min
Pour Point (°C)
-6 Max
Water Content (%)
Trace
1.Outstanding anti-wear performance
2.Good oxidation stability
3.Competive price
Typical Properties:
Items
46# anti wear hydrualic oil
Kinematic Viscosity mm2/s (at 40°C)
41.4~50.6
Viscosity Index
95 Min
Flash Point (°C):
180 Min
Pour Point (°C)
-6 Max
Water Content (%)
Trace
FUKKOL Gear Rust Prevention Oil Spray
FUKKOL Gear Rust Prevention Oil Spray
Provide corrosion protection more than 5 years indoor, 3year outdoor
FUKKOL Gear Rust Prevention Oil Spray
DESCRIPTION:
Fukkol Rustking L type rust-proof agent makes a brown protective film shows where the product has been applied. Rustking L type provides long term lubrication and protection against rust. The rust-proof film will not melt at 50°C~60°C. The rust-proof duration will be more than five years indoor and three years in ourdoor. The product can be removed by a mild solvent or simply by putting a mould back in service and running a few parts.
BENEFITS
Contains a brown dye to identify treated surfaces
-Simply removed by putting mould back in service
-Provides complete protection against finger-print
-Provides corrosion protection for more than 5 years (indoor)
--Provides corrosion protection for more than 3 years (ourdoor)
APPLICATION
Its brown colored ultra-thin soft film which provides long term corrosion protection to metals. Absolutely displaces water and resists moisture. Specially designed for protection of moulds, castings and dies in production or in storage. A reliable rust-proof agent for metal tools and parts, power plants and ocean-going freighters.
Provide corrosion protection more than 5 years indoor, 3year outdoor
FUKKOL Gear Rust Prevention Oil Spray
DESCRIPTION:
Fukkol Rustking L type rust-proof agent makes a brown protective film shows where the product has been applied. Rustking L type provides long term lubrication and protection against rust. The rust-proof film will not melt at 50°C~60°C. The rust-proof duration will be more than five years indoor and three years in ourdoor. The product can be removed by a mild solvent or simply by putting a mould back in service and running a few parts.
BENEFITS
Contains a brown dye to identify treated surfaces
-Simply removed by putting mould back in service
-Provides complete protection against finger-print
-Provides corrosion protection for more than 5 years (indoor)
--Provides corrosion protection for more than 3 years (ourdoor)
APPLICATION
Its brown colored ultra-thin soft film which provides long term corrosion protection to metals. Absolutely displaces water and resists moisture. Specially designed for protection of moulds, castings and dies in production or in storage. A reliable rust-proof agent for metal tools and parts, power plants and ocean-going freighters.
FUKKOL Gear Rust Prevention Spray
FUKKOL Gear Rust Prevention Spray
Medium duty rust preventative
Forms a soft protective film
FUKKOL Gear Rust Prevention Spray
Medium duty rust preventative
Forms a soft protective film
Description
Fukkol Ruster Wax is a
medium duty rust preventative
,
formulated to provide corrosion protection to components such as
gears,
steel bars, tubes and heavy components
and other exposed surfaces stored either indoor or outdoors.
This product contains a fugitive red dye for identification purposes.
Application
FUKKOL Ruster Wax is the ideal choice for the protection of bright metal surfaces on
steel tube, rod or bars and machined components
.
The protective film formed by Ruster Wax is can be removed automatically,
so cleaning of components is not necessary.
Being packed by aerosol dispenser
,
it is the ideal for rust-resistance in workshop.
Benefits:
- Ultra-fine indoor corrosion resistance
- Forms a soft protective film
- Generally, component surfaces need no degrease treatment
- Aerosol dispenser for convenience
-
CFC-free.
Characteristics
Appearance
White liquid
Flash point
<-18°C
Vapor Pressure
Not Determined
Propellant
LPG
Solubillty
Water-insoluble
Medium duty rust preventative
Forms a soft protective film
FUKKOL Gear Rust Prevention Spray
Medium duty rust preventative
Forms a soft protective film
Description
Fukkol Ruster Wax is a
medium duty rust preventative
,
formulated to provide corrosion protection to components such as
gears,
steel bars, tubes and heavy components
and other exposed surfaces stored either indoor or outdoors.
This product contains a fugitive red dye for identification purposes.
Application
FUKKOL Ruster Wax is the ideal choice for the protection of bright metal surfaces on
steel tube, rod or bars and machined components
.
The protective film formed by Ruster Wax is can be removed automatically,
so cleaning of components is not necessary.
Being packed by aerosol dispenser
,
it is the ideal for rust-resistance in workshop.
Benefits:
- Ultra-fine indoor corrosion resistance
- Forms a soft protective film
- Generally, component surfaces need no degrease treatment
- Aerosol dispenser for convenience
-
CFC-free.
Characteristics
Appearance
White liquid
Flash point
<-18°C
Vapor Pressure
Not Determined
Propellant
LPG
Solubillty
Water-insoluble
FUKKOL Gear Rust Wax Spray
FUKKOL Gear Rust Wax Spray
Medium duty rust preventative
Forms a soft protective film
FUKKOL Gear Rust Wax Spray
Medium duty rust preventative
Forms a soft protective film
Description
Fukkol Ruster Wax is a
medium duty rust preventative
,
formulated to provide corrosion protection to components such as
gears,
steel bars, tubes and heavy components
and other exposed surfaces stored either indoor or outdoors.
This product contains a fugitive red dye for identification purposes.
Application
FUKKOL Ruster Wax is the ideal choice for the protection of bright metal surfaces on
steel tube, rod or bars and machined components
.
The protective film formed by Ruster Wax is can be removed automatically,
so cleaning of components is not necessary.
Being packed by aerosol dispenser
,
it is the ideal for rust-resistance in workshop.
Benefits:
- Ultra-fine indoor corrosion resistance
- Forms a soft protective film
- Generally, component surfaces need no degrease treatment
- Aerosol dispenser for convenience
-
CFC-free.
Characteristics
Appearance
White liquid
Flash point
<-18°C
Vapor Pressure
Not Determined
Propellant
LPG
Solubillty
Water-insoluble
Medium duty rust preventative
Forms a soft protective film
FUKKOL Gear Rust Wax Spray
Medium duty rust preventative
Forms a soft protective film
Description
Fukkol Ruster Wax is a
medium duty rust preventative
,
formulated to provide corrosion protection to components such as
gears,
steel bars, tubes and heavy components
and other exposed surfaces stored either indoor or outdoors.
This product contains a fugitive red dye for identification purposes.
Application
FUKKOL Ruster Wax is the ideal choice for the protection of bright metal surfaces on
steel tube, rod or bars and machined components
.
The protective film formed by Ruster Wax is can be removed automatically,
so cleaning of components is not necessary.
Being packed by aerosol dispenser
,
it is the ideal for rust-resistance in workshop.
Benefits:
- Ultra-fine indoor corrosion resistance
- Forms a soft protective film
- Generally, component surfaces need no degrease treatment
- Aerosol dispenser for convenience
-
CFC-free.
Characteristics
Appearance
White liquid
Flash point
<-18°C
Vapor Pressure
Not Determined
Propellant
LPG
Solubillty
Water-insoluble
FUKKOL Golden Mould & Machine Oil Cleaner
FUKKOL Golden Mould & Machine Oil Cleaner
-High efficiency
-Non-toxic
-favourable price
FUKKOL Golden Mould & Machine Oil Cleaner
Description
Fukkol Mould Cleaner is a cleaning agent that is mild, does not harm plastic, has low flash point, contains no CFC113 or trichloro ethane. It volatilize rapidly and can be used in cleaning machine, mould and highly sensitive electronic equipment. It can effectively remove dirt and make the equipment stable. It can also greatly save manpower and cost for maintenance.
Application
Applicable for cleaning precise electronic instrument and mould, such as: electrical contact, circuit board, switch, telephone, PC components, motor, relay, generator, magnetic head, current breaker, plug, socket, connector, lab instruments, etc
-High efficiency
-Non-toxic
-favourable price
FUKKOL Golden Mould & Machine Oil Cleaner
Description
Fukkol Mould Cleaner is a cleaning agent that is mild, does not harm plastic, has low flash point, contains no CFC113 or trichloro ethane. It volatilize rapidly and can be used in cleaning machine, mould and highly sensitive electronic equipment. It can effectively remove dirt and make the equipment stable. It can also greatly save manpower and cost for maintenance.
Application
Applicable for cleaning precise electronic instrument and mould, such as: electrical contact, circuit board, switch, telephone, PC components, motor, relay, generator, magnetic head, current breaker, plug, socket, connector, lab instruments, etc
FUKKOL Green Color Anti-rust Spray
FUKKOL Green Color Anti-rust Spray
Simply removed by putting mould back in service
FUKKOL Green Color Anti-rust Spray
Description
Fukkol Mould Protector is a light grease-like coating that has a green color that visibly shows where the product has been applied. Mould Protector displaces moisture and provides corrosion protection for more than two years of indoor storage. The product may be removed with a mild solvent rinse or wipe or simply by putting a mould back in service and running a few parts.
Benefits
-Contains a green dye to identify treated surfaces
-Simply removed by putting mould back in service
-Provides complete protection against finger-print
-Provides corrosion protection for more than 2 years (indoor)
-No CFC
Application
It can form green colored ultra-thin soft film which provides long term corrosion protection to metals. Absolutely displaces water and resists moisture. Especially designed for protection of moulds, castings and dies in production or in storage. A reliable rust preventative agent for metal tools and parts.
Flash Point (PMCC)
< 0°C
Boiling Range
> 100°C
Specific Gravity
0.6032
Vapor Density
Is heavier than air
Evaporation Rate
>1 (Butyl Acetate=1)
Stability
Stable
Simply removed by putting mould back in service
FUKKOL Green Color Anti-rust Spray
Description
Fukkol Mould Protector is a light grease-like coating that has a green color that visibly shows where the product has been applied. Mould Protector displaces moisture and provides corrosion protection for more than two years of indoor storage. The product may be removed with a mild solvent rinse or wipe or simply by putting a mould back in service and running a few parts.
Benefits
-Contains a green dye to identify treated surfaces
-Simply removed by putting mould back in service
-Provides complete protection against finger-print
-Provides corrosion protection for more than 2 years (indoor)
-No CFC
Application
It can form green colored ultra-thin soft film which provides long term corrosion protection to metals. Absolutely displaces water and resists moisture. Especially designed for protection of moulds, castings and dies in production or in storage. A reliable rust preventative agent for metal tools and parts.
Flash Point (PMCC)
< 0°C
Boiling Range
> 100°C
Specific Gravity
0.6032
Vapor Density
Is heavier than air
Evaporation Rate
>1 (Butyl Acetate=1)
Stability
Stable
FUKKOL Green Color Anti-rust and Mould Protector Spray
FUKKOL Green Color Anti-rust and Mould Protector Spray
Simply removed by putting mould back in service
FUKKOL Green Color Anti-rust and Mould Protector Spray Green Color
Description
Fukkol Mould Protector is a light grease-like coating that has a green color that visibly shows where the product has been applied. Mould Protector displaces moisture and provides corrosion protection for more than two years of indoor storage. The product may be removed with a mild solvent rinse or wipe or simply by putting a mould back in service and running a few parts.
Benefits
-Contains a green dye to identify treated surfaces
-Simply removed by putting mould back in service
-Provides complete protection against finger-print
-Provides corrosion protection for more than 2 years (indoor)
-No CFC
Application
It can form green colored ultra-thin soft film which provides long term corrosion protection to metals. Absolutely displaces water and resists moisture. Especially designed for protection of moulds, castings and dies in production or in storage. A reliable rust preventative agent for metal tools and parts.
Flash Point (PMCC)
< 0°C
Boiling Range
> 100°C
Specific Gravity
0.6032
Vapor Density
Is heavier than air
Evaporation Rate
>1 (Butyl Acetate=1)
Stability
Stable
Simply removed by putting mould back in service
FUKKOL Green Color Anti-rust and Mould Protector Spray Green Color
Description
Fukkol Mould Protector is a light grease-like coating that has a green color that visibly shows where the product has been applied. Mould Protector displaces moisture and provides corrosion protection for more than two years of indoor storage. The product may be removed with a mild solvent rinse or wipe or simply by putting a mould back in service and running a few parts.
Benefits
-Contains a green dye to identify treated surfaces
-Simply removed by putting mould back in service
-Provides complete protection against finger-print
-Provides corrosion protection for more than 2 years (indoor)
-No CFC
Application
It can form green colored ultra-thin soft film which provides long term corrosion protection to metals. Absolutely displaces water and resists moisture. Especially designed for protection of moulds, castings and dies in production or in storage. A reliable rust preventative agent for metal tools and parts.
Flash Point (PMCC)
< 0°C
Boiling Range
> 100°C
Specific Gravity
0.6032
Vapor Density
Is heavier than air
Evaporation Rate
>1 (Butyl Acetate=1)
Stability
Stable
FUKKOL Green Color Anti-rust
FUKKOL Green Color Anti-rust
Simply removed by putting mould back in service
FUKKOL Green Color Anti-rust
Description
Fukkol Mould Protector is a light grease-like coating that has a green color that visibly shows where the product has been applied. Mould Protector displaces moisture and provides corrosion protection for more than two years of indoor storage. The product may be removed with a mild solvent rinse or wipe or simply by putting a mould back in service and running a few parts.
Benefits
-Contains a green dye to identify treated surfaces
-Simply removed by putting mould back in service
-Provides complete protection against finger-print
-Provides corrosion protection for more than 2 years (indoor)
-No CFC
Application
It can form green colored ultra-thin soft film which provides long term corrosion protection to metals. Absolutely displaces water and resists moisture. Especially designed for protection of moulds, castings and dies in production or in storage. A reliable rust preventative agent for metal tools and parts.
Flash Point (PMCC)
< 0°C
Boiling Range
> 100°C
Specific Gravity
0.6032
Vapor Density
Is heavier than air
Evaporation Rate
>1 (Butyl Acetate=1)
Stability
Stable
Simply removed by putting mould back in service
FUKKOL Green Color Anti-rust
Description
Fukkol Mould Protector is a light grease-like coating that has a green color that visibly shows where the product has been applied. Mould Protector displaces moisture and provides corrosion protection for more than two years of indoor storage. The product may be removed with a mild solvent rinse or wipe or simply by putting a mould back in service and running a few parts.
Benefits
-Contains a green dye to identify treated surfaces
-Simply removed by putting mould back in service
-Provides complete protection against finger-print
-Provides corrosion protection for more than 2 years (indoor)
-No CFC
Application
It can form green colored ultra-thin soft film which provides long term corrosion protection to metals. Absolutely displaces water and resists moisture. Especially designed for protection of moulds, castings and dies in production or in storage. A reliable rust preventative agent for metal tools and parts.
Flash Point (PMCC)
< 0°C
Boiling Range
> 100°C
Specific Gravity
0.6032
Vapor Density
Is heavier than air
Evaporation Rate
>1 (Butyl Acetate=1)
Stability
Stable
FUKKOL Green Color Mould Protector
FUKKOL Green Color Mould Protector
Simply removed by putting mould back in service
FUKKOL Green Color Mould Protector
Description
Fukkol Mould Protector is a light grease-like coating that has a green color that visibly shows where the product has been applied. Mould Protector displaces moisture and provides corrosion protection for more than two years of indoor storage. The product may be removed with a mild solvent rinse or wipe or simply by putting a mould back in service and running a few parts.
Benefits
-Contains a green dye to identify treated surfaces
-Simply removed by putting mould back in service
-Provides complete protection against finger-print
-Provides corrosion protection for more than 2 years (indoor)
-No CFC
Application
It can form green colored ultra-thin soft film which provides long term corrosion protection to metals. Absolutely displaces water and resists moisture. Especially designed for protection of moulds, castings and dies in production or in storage. A reliable rust preventative agent for metal tools and parts.
Flash Point (PMCC)
< 0°C
Boiling Range
> 100°C
Specific Gravity
0.6032
Vapor Density
Is heavier than air
Evaporation Rate
>1 (Butyl Acetate=1)
Stability
Stable
Simply removed by putting mould back in service
FUKKOL Green Color Mould Protector
Description
Fukkol Mould Protector is a light grease-like coating that has a green color that visibly shows where the product has been applied. Mould Protector displaces moisture and provides corrosion protection for more than two years of indoor storage. The product may be removed with a mild solvent rinse or wipe or simply by putting a mould back in service and running a few parts.
Benefits
-Contains a green dye to identify treated surfaces
-Simply removed by putting mould back in service
-Provides complete protection against finger-print
-Provides corrosion protection for more than 2 years (indoor)
-No CFC
Application
It can form green colored ultra-thin soft film which provides long term corrosion protection to metals. Absolutely displaces water and resists moisture. Especially designed for protection of moulds, castings and dies in production or in storage. A reliable rust preventative agent for metal tools and parts.
Flash Point (PMCC)
< 0°C
Boiling Range
> 100°C
Specific Gravity
0.6032
Vapor Density
Is heavier than air
Evaporation Rate
>1 (Butyl Acetate=1)
Stability
Stable
FUKKOL Green Color Rust Prevention Spray
FUKKOL Green Color Rust Prevention Spray
Simply removed by putting mould back in service
FUKKOL Green Color Rust Prevention Spray
Description
Fukkol Mould Protector is a light grease-like coating that has a green color that visibly shows where the product has been applied. Mould Protector displaces moisture and provides corrosion protection for more than two years of indoor storage. The product may be removed with a mild solvent rinse or wipe or simply by putting a mould back in service and running a few parts.
Benefits
-Contains a green dye to identify treated surfaces
-Simply removed by putting mould back in service
-Provides complete protection against finger-print
-Provides corrosion protection for more than 2 years (indoor)
-No CFC
Application
It can form green colored ultra-thin soft film which provides long term corrosion protection to metals. Absolutely displaces water and resists moisture. Especially designed for protection of moulds, castings and dies in production or in storage. A reliable rust preventative agent for metal tools and parts.
Flash Point (PMCC)
< 0°C
Boiling Range
> 100°C
Specific Gravity
0.6032
Vapor Density
Is heavier than air
Evaporation Rate
>1 (Butyl Acetate=1)
Stability
Stable
Simply removed by putting mould back in service
FUKKOL Green Color Rust Prevention Spray
Description
Fukkol Mould Protector is a light grease-like coating that has a green color that visibly shows where the product has been applied. Mould Protector displaces moisture and provides corrosion protection for more than two years of indoor storage. The product may be removed with a mild solvent rinse or wipe or simply by putting a mould back in service and running a few parts.
Benefits
-Contains a green dye to identify treated surfaces
-Simply removed by putting mould back in service
-Provides complete protection against finger-print
-Provides corrosion protection for more than 2 years (indoor)
-No CFC
Application
It can form green colored ultra-thin soft film which provides long term corrosion protection to metals. Absolutely displaces water and resists moisture. Especially designed for protection of moulds, castings and dies in production or in storage. A reliable rust preventative agent for metal tools and parts.
Flash Point (PMCC)
< 0°C
Boiling Range
> 100°C
Specific Gravity
0.6032
Vapor Density
Is heavier than air
Evaporation Rate
>1 (Butyl Acetate=1)
Stability
Stable
FUKKOL Grinding EDM Lubricant
FUKKOL Grinding EDM Lubricant
excellent coolant
low electric conductiviety.
FUKKOL Grinding EDM Lubricant
excellent coolant
low electric conductiviety.
Product Information
Fukkol EDM SUPER Electrical Discharge Machining Fluid is a advanced-formula ,dielectric fluid, which combines high dielectric strength and chemical stability with low electric conductiviety.
This clear and highly refined fluid serves as an excellent coolant with quick flushing action for the efficient removal of small metalchips.
Super E.D.M Fluid unique dielectric properties provide super insulation ,as well as an intensified spark, by constricting the spark channel .this minimizes electrode wear and results in high machining precision and an improved workpiece finish.
Most importantly ,Super E.D.M..Fluid meets U.S.A.F.D.A. Requirements and is a user friendly fluid. Therefore, there are no unpleasant odors or irritants to the skin.
excellent coolant
low electric conductiviety.
FUKKOL Grinding EDM Lubricant
excellent coolant
low electric conductiviety.
Product Information
Fukkol EDM SUPER Electrical Discharge Machining Fluid is a advanced-formula ,dielectric fluid, which combines high dielectric strength and chemical stability with low electric conductiviety.
This clear and highly refined fluid serves as an excellent coolant with quick flushing action for the efficient removal of small metalchips.
Super E.D.M Fluid unique dielectric properties provide super insulation ,as well as an intensified spark, by constricting the spark channel .this minimizes electrode wear and results in high machining precision and an improved workpiece finish.
Most importantly ,Super E.D.M..Fluid meets U.S.A.F.D.A. Requirements and is a user friendly fluid. Therefore, there are no unpleasant odors or irritants to the skin.
4WD Car Silicone Diff Oil
4WD Car Silicone Diff Oil
For on-road and off-road Models
4WD Car Silicone Diff Oil is formulated to provide the right frameworks for your differential feeing. This product features a high temperature tolerance and anti-corrosive with accurate viscosity properties.
Viscosity: 800, 900, 1000, 1100, 1200, 1300, 2000, 3000, 4000, 5000, 6000, 7000, 10000, 20000, 30000, 40000, 50000, 100000, 300000.
For on-road and off-road Models
4WD Car Silicone Diff Oil is formulated to provide the right frameworks for your differential feeing. This product features a high temperature tolerance and anti-corrosive with accurate viscosity properties.
Viscosity: 800, 900, 1000, 1100, 1200, 1300, 2000, 3000, 4000, 5000, 6000, 7000, 10000, 20000, 30000, 40000, 50000, 100000, 300000.
FUKKOL Grinding EDM Oil
FUKKOL Grinding EDM Oil
excellent coolant
low electric conductiviety.
FUKKOL Grinding EDM Oil
excellent coolant
low electric conductiviety.
Product Information
Fukkol EDM SUPER Electrical Discharge Machining Fluid is a advanced-formula ,dielectric fluid, which combines high dielectric strength and chemical stability with low electric conductiviety.
This clear and highly refined fluid serves as an excellent coolant with quick flushing action for the efficient removal of small metalchips.
Super E.D.M Fluid unique dielectric properties provide super insulation ,as well as an intensified spark, by constricting the spark channel .this minimizes electrode wear and results in high machining precision and an improved workpiece finish.
Most importantly ,Super E.D.M..Fluid meets U.S.A.F.D.A. Requirements and is a user friendly fluid. Therefore, there are no unpleasant odors or irritants to the skin.
excellent coolant
low electric conductiviety.
FUKKOL Grinding EDM Oil
excellent coolant
low electric conductiviety.
Product Information
Fukkol EDM SUPER Electrical Discharge Machining Fluid is a advanced-formula ,dielectric fluid, which combines high dielectric strength and chemical stability with low electric conductiviety.
This clear and highly refined fluid serves as an excellent coolant with quick flushing action for the efficient removal of small metalchips.
Super E.D.M Fluid unique dielectric properties provide super insulation ,as well as an intensified spark, by constricting the spark channel .this minimizes electrode wear and results in high machining precision and an improved workpiece finish.
Most importantly ,Super E.D.M..Fluid meets U.S.A.F.D.A. Requirements and is a user friendly fluid. Therefore, there are no unpleasant odors or irritants to the skin.
FUKKOL H.T Paste Mould Burn Prevention
FUKKOL H.T Paste
-Specially nano technology prevent mould burn ,bearing up to 1400centigrade
-maintain 3-4years once worked
FUKKOL H.T Paste Mould Burn Prevention
Description:
A white non-carbonized-under-high-temperature lubricating paste for lubrication of all kinds of surfaces subject to high load, particularly operation at low speed and/or oscillating motion and of steel and non-ferrous metal screw ,plug and bayonet joints.
Applications:
-Anti-Selzlng non-destructive disassembly of threaded conncetions subject to high temperatures, i.e. at internal combustion engines and turbines oven after long service time.
-Corrosion protection for nuts and bolts,sockcts and spindles in refurenes, steel-and cement mills, marine and agriculture.
Benefits:
-Best use-ONE single paste for MANY applications;
-White-coloured, non-staining, outstanding lubricity
-High pressure, low friction and low wear resistance, reliable anti-serze effect and corrosion protection.
-Economical and ecological solution for many plants and shops which have been depending on a number of special pastes so far.
-contains organic active molybdenum additive for increased performance.
Environment:
Ecology - FUKKOL H.T PASTE is non-toxic,contains no ferrous metals and is free from graphite , molybdenum-disulphide and sulphide additives.
-Specially nano technology prevent mould burn ,bearing up to 1400centigrade
-maintain 3-4years once worked
FUKKOL H.T Paste Mould Burn Prevention
Description:
A white non-carbonized-under-high-temperature lubricating paste for lubrication of all kinds of surfaces subject to high load, particularly operation at low speed and/or oscillating motion and of steel and non-ferrous metal screw ,plug and bayonet joints.
Applications:
-Anti-Selzlng non-destructive disassembly of threaded conncetions subject to high temperatures, i.e. at internal combustion engines and turbines oven after long service time.
-Corrosion protection for nuts and bolts,sockcts and spindles in refurenes, steel-and cement mills, marine and agriculture.
Benefits:
-Best use-ONE single paste for MANY applications;
-White-coloured, non-staining, outstanding lubricity
-High pressure, low friction and low wear resistance, reliable anti-serze effect and corrosion protection.
-Economical and ecological solution for many plants and shops which have been depending on a number of special pastes so far.
-contains organic active molybdenum additive for increased performance.
Environment:
Ecology - FUKKOL H.T PASTE is non-toxic,contains no ferrous metals and is free from graphite , molybdenum-disulphide and sulphide additives.
FUKKOL H.T Paste Mould Burn Prevention
FUKKOL H.T Paste
-Specially nano technology prevent mould burn ,bearing up to 1400centigrade
-maintain 3-4years once worked
FUKKOL H.T Paste Mould Burn Prevention
Description:
A white non-carbonized-under-high-temperature lubricating paste for lubrication of all kinds of surfaces subject to high load, particularly operation at low speed and/or oscillating motion and of steel and non-ferrous metal screw ,plug and bayonet joints.
Applications:
-Anti-Selzlng non-destructive disassembly of threaded conncetions subject to high temperatures, i.e. at internal combustion engines and turbines oven after long service time.
-Corrosion protection for nuts and bolts,sockcts and spindles in refurenes, steel-and cement mills, marine and agriculture.
Benefits:
-Best use-ONE single paste for MANY applications;
-White-coloured, non-staining, outstanding lubricity
-High pressure, low friction and low wear resistance, reliable anti-serze effect and corrosion protection.
-Economical and ecological solution for many plants and shops which have been depending on a number of special pastes so far.
-contains organic active molybdenum additive for increased performance.
Environment:
Ecology - FUKKOL H.T PASTE is non-toxic,contains no ferrous metals and is free from graphite , molybdenum-disulphide and sulphide additives.
-Specially nano technology prevent mould burn ,bearing up to 1400centigrade
-maintain 3-4years once worked
FUKKOL H.T Paste Mould Burn Prevention
Description:
A white non-carbonized-under-high-temperature lubricating paste for lubrication of all kinds of surfaces subject to high load, particularly operation at low speed and/or oscillating motion and of steel and non-ferrous metal screw ,plug and bayonet joints.
Applications:
-Anti-Selzlng non-destructive disassembly of threaded conncetions subject to high temperatures, i.e. at internal combustion engines and turbines oven after long service time.
-Corrosion protection for nuts and bolts,sockcts and spindles in refurenes, steel-and cement mills, marine and agriculture.
Benefits:
-Best use-ONE single paste for MANY applications;
-White-coloured, non-staining, outstanding lubricity
-High pressure, low friction and low wear resistance, reliable anti-serze effect and corrosion protection.
-Economical and ecological solution for many plants and shops which have been depending on a number of special pastes so far.
-contains organic active molybdenum additive for increased performance.
Environment:
Ecology - FUKKOL H.T PASTE is non-toxic,contains no ferrous metals and is free from graphite , molybdenum-disulphide and sulphide additives.
Friday, September 30, 2011
FUKKOL H.T. PASTE
FUKKOL H.T. PASTE
1.NO OUTFLOW,NO MELTING,NO CARBONIZATION
2.Take the ejector pin oils place
3.stand 1400 degree
FUKKOL H.T. PASTE
Description:
A white non-carbonized-under-
high-temperature lubricating paste(1400 degree)
for lubrication of all kinds of surfaces subject to high load,
particularly operation at low speed and/or oscillating motion and of steel and
non-ferrous metal screw
,plug and bayonet joints.
Applications:
-
Anti-Seizlng non-destructive disassembly
of threaded conncetions subject to high temperatures,
i.e. at internal combustion engines and turbines oven after long service time.
-Corrosion protection for nuts and bolts,sockcts and spindles in refurenes, steel-and cement mills, marine and agriculture.
Benefits:
-Best use-ONE single paste for MANY applications;
-White-coloured,
non-staining
, outstanding lubricity
-High pressure
, low friction and low wear resistance, reliable anti-serze effect and corrosion protection.
-Economical and ecological solution for many plants and shops which have been depending on
a number of special pastes so far.
-contains organic active molybdenum additive for increased performance.
Environment:
Ecology - FUKKOL H.T PASTE is non-toxic,contains no ferrous metals and is free from graphite , molybdenum-disulphide and sulphide additives.
Typical physical properties
Appearance
White color
Basc
Synthetic oil compound with organic thickener and combination of white solid lubricants
Unworked penetration
280-320
Specific gravity
1.2g/cc at 20°C
Dropping point
None
Base oil viscosity
21mm2/s at 40°C
Temperature range
-40°C~+1400°C
Friction value
0.10-0.13
Degree of corrosion
1-90
Depth of wear
0.3um
Salt spray test
>500 hours
Four-ball tester
3800/4000N
1.NO OUTFLOW,NO MELTING,NO CARBONIZATION
2.Take the ejector pin oils place
3.stand 1400 degree
FUKKOL H.T. PASTE
Description:
A white non-carbonized-under-
high-temperature lubricating paste(1400 degree)
for lubrication of all kinds of surfaces subject to high load,
particularly operation at low speed and/or oscillating motion and of steel and
non-ferrous metal screw
,plug and bayonet joints.
Applications:
-
Anti-Seizlng non-destructive disassembly
of threaded conncetions subject to high temperatures,
i.e. at internal combustion engines and turbines oven after long service time.
-Corrosion protection for nuts and bolts,sockcts and spindles in refurenes, steel-and cement mills, marine and agriculture.
Benefits:
-Best use-ONE single paste for MANY applications;
-White-coloured,
non-staining
, outstanding lubricity
-High pressure
, low friction and low wear resistance, reliable anti-serze effect and corrosion protection.
-Economical and ecological solution for many plants and shops which have been depending on
a number of special pastes so far.
-contains organic active molybdenum additive for increased performance.
Environment:
Ecology - FUKKOL H.T PASTE is non-toxic,contains no ferrous metals and is free from graphite , molybdenum-disulphide and sulphide additives.
Typical physical properties
Appearance
White color
Basc
Synthetic oil compound with organic thickener and combination of white solid lubricants
Unworked penetration
280-320
Specific gravity
1.2g/cc at 20°C
Dropping point
None
Base oil viscosity
21mm2/s at 40°C
Temperature range
-40°C~+1400°C
Friction value
0.10-0.13
Degree of corrosion
1-90
Depth of wear
0.3um
Salt spray test
>500 hours
Four-ball tester
3800/4000N
FUKKOL H.T. PASTE
FUKKOL H.T. PASTE
Stand up to 1400 centigrade
Warranty no flow out , no carbonization,no melting
Can replace ejector pin oil
FUKKOL H.T. PASTE
Description:
A white non-carbonized-under-high-temperature lubricating paste for lubrication of all kinds of surfaces subject to high load,
particularly operation at low speed and/or oscillating motion and of steel and non-ferrous metal screw ,plug and bayonet joints.
Applications:
-Anti-Selzlng non-destructive disassembly of threaded conncetions subject to high temperatures,
i.e. at internal combustion engines and turbines oven after long service time.
-Corrosion protection for nuts and bolts,sockcts and spindles in refurenes, steel-and cement mills, marine and agriculture.
,it is a paste special formulated by ceramic powder nanotechnology additives which can stands 1400°C,we warranty the paste will not flow out ,no carbonization ,no melting.You can use in "Mould Parts" such as ejector pins/sleeves/slide way ect.
It can fully take the place of the traditional ejector pin oil .According to the customer datas,it can basically extend 25% of mould life span.
How to use it:
First you must dismantle the mould from the machine, then you need to release the ejector pin from the mould ,
plz remeber the whole mould must be clean and dry,,use the cleaning products to remove the oil ,dirt and carbonated substance.
Then you brush the H.T Paste on the pin,and make it cover a white thin film on the surface. Install the pin on the mould until you asure the mould is free from contamination.
When you install the mould on the machine, when the mould reach the temperature of 80 centigrade it will turn to a dry lubricating powder film on the surface on the pins.
It is perfectly fit to use it if your products requires no contamination from the machine ,for example : the white and lucency products.
What,s more,it,s certificated by FDA,international SGS and ROSH.
You only have to use it once ,and the second time you use it will be the mould maintaining time, usually can stand 8000 mould ,but it depends on how you use the machine.
Benefits:
-Best use-ONE single paste for MANY applications;
-White-coloured, non-staining, outstanding lubricity
-High pressure, low friction and low wear resistance, reliable anti-serze effect and corrosion protection.
-Economical and ecological solution for many plants and shops which have been depending on a number of special pastes so far.
-contains organic active molybdenum additive for increased performance.
Environment:
Ecology - FUKKOL H.T PASTE is non-toxic,contains no ferrous metals and is free from graphite , molybdenum-disulphide and sulphide additives.
Typical physical properties
Appearance
White color
Basc
Synthetic oil compound with organic thickener and combination of white solid lubricants
Unworked penetration
280-320
Specific gravity
1.2g/cc at 20°C
Dropping point
None
Base oil viscosity
21mm2/s at 40°C
Temperature range
-40°C~+1400°C
Friction value
0.10-0.13
Degree of corrosion
1-90
Depth of wear
0.3um
Salt spray test
>500 hours
Four-ball tester
3800/4000N
Stand up to 1400 centigrade
Warranty no flow out , no carbonization,no melting
Can replace ejector pin oil
FUKKOL H.T. PASTE
Description:
A white non-carbonized-under-high-temperature lubricating paste for lubrication of all kinds of surfaces subject to high load,
particularly operation at low speed and/or oscillating motion and of steel and non-ferrous metal screw ,plug and bayonet joints.
Applications:
-Anti-Selzlng non-destructive disassembly of threaded conncetions subject to high temperatures,
i.e. at internal combustion engines and turbines oven after long service time.
-Corrosion protection for nuts and bolts,sockcts and spindles in refurenes, steel-and cement mills, marine and agriculture.
,it is a paste special formulated by ceramic powder nanotechnology additives which can stands 1400°C,we warranty the paste will not flow out ,no carbonization ,no melting.You can use in "Mould Parts" such as ejector pins/sleeves/slide way ect.
It can fully take the place of the traditional ejector pin oil .According to the customer datas,it can basically extend 25% of mould life span.
How to use it:
First you must dismantle the mould from the machine, then you need to release the ejector pin from the mould ,
plz remeber the whole mould must be clean and dry,,use the cleaning products to remove the oil ,dirt and carbonated substance.
Then you brush the H.T Paste on the pin,and make it cover a white thin film on the surface. Install the pin on the mould until you asure the mould is free from contamination.
When you install the mould on the machine, when the mould reach the temperature of 80 centigrade it will turn to a dry lubricating powder film on the surface on the pins.
It is perfectly fit to use it if your products requires no contamination from the machine ,for example : the white and lucency products.
What,s more,it,s certificated by FDA,international SGS and ROSH.
You only have to use it once ,and the second time you use it will be the mould maintaining time, usually can stand 8000 mould ,but it depends on how you use the machine.
Benefits:
-Best use-ONE single paste for MANY applications;
-White-coloured, non-staining, outstanding lubricity
-High pressure, low friction and low wear resistance, reliable anti-serze effect and corrosion protection.
-Economical and ecological solution for many plants and shops which have been depending on a number of special pastes so far.
-contains organic active molybdenum additive for increased performance.
Environment:
Ecology - FUKKOL H.T PASTE is non-toxic,contains no ferrous metals and is free from graphite , molybdenum-disulphide and sulphide additives.
Typical physical properties
Appearance
White color
Basc
Synthetic oil compound with organic thickener and combination of white solid lubricants
Unworked penetration
280-320
Specific gravity
1.2g/cc at 20°C
Dropping point
None
Base oil viscosity
21mm2/s at 40°C
Temperature range
-40°C~+1400°C
Friction value
0.10-0.13
Degree of corrosion
1-90
Depth of wear
0.3um
Salt spray test
>500 hours
Four-ball tester
3800/4000N
FUKKOL H.T. PASTE
FUKKOL H.T. PASTE
1.NO OUTFLOW,NO MELTING,NO CARBONIZATION
2.Take the ejector pin oils place
3.stand 1400 degree
FUKKOL H.T. PASTE
Description:
A white non-carbonized-under-high-temperature lubricating paste for lubrication of all kinds of surfaces subject to high load,
particularly operation at low speed and/or oscillating motion and of steel and
non-ferrous metal screw ,plug and bayonet joints.
Applications:
-Anti-Selzlng non-destructive disassembly of threaded conncetions subject to high temperatures,
i.e. at internal combustion engines and turbines oven after long service time.
-Corrosion protection for nuts and bolts,sockcts and spindles in refurenes, steel-and cement mills, marine and agriculture.
Benefits:
-Best use-ONE single paste for MANY applications;
-White-coloured, non-staining, outstanding lubricity
-High pressure, low friction and low wear resistance, reliable anti-serze effect and corrosion protection.
-Economical and ecological solution for many plants and shops which have been depending on
a number of special pastes so far.
-contains organic active molybdenum additive for increased performance.
Environment:
Ecology - FUKKOL H.T PASTE is non-toxic,contains no ferrous metals and is free from graphite , molybdenum-disulphide and sulphide additives.
Typical physical properties
Appearance
White color
Basc
Synthetic oil compound with organic thickener and combination of white solid lubricants
Unworked penetration
280-320
Specific gravity
1.2g/cc at 20°C
Dropping point
None
Base oil viscosity
21mm2/s at 40°C
Temperature range
-40°C~+1400°C
Friction value
0.10-0.13
Degree of corrosion
1-90
Depth of wear
0.3um
Salt spray test
>500 hours
Four-ball tester
3800/4000N
1.NO OUTFLOW,NO MELTING,NO CARBONIZATION
2.Take the ejector pin oils place
3.stand 1400 degree
FUKKOL H.T. PASTE
Description:
A white non-carbonized-under-high-temperature lubricating paste for lubrication of all kinds of surfaces subject to high load,
particularly operation at low speed and/or oscillating motion and of steel and
non-ferrous metal screw ,plug and bayonet joints.
Applications:
-Anti-Selzlng non-destructive disassembly of threaded conncetions subject to high temperatures,
i.e. at internal combustion engines and turbines oven after long service time.
-Corrosion protection for nuts and bolts,sockcts and spindles in refurenes, steel-and cement mills, marine and agriculture.
Benefits:
-Best use-ONE single paste for MANY applications;
-White-coloured, non-staining, outstanding lubricity
-High pressure, low friction and low wear resistance, reliable anti-serze effect and corrosion protection.
-Economical and ecological solution for many plants and shops which have been depending on
a number of special pastes so far.
-contains organic active molybdenum additive for increased performance.
Environment:
Ecology - FUKKOL H.T PASTE is non-toxic,contains no ferrous metals and is free from graphite , molybdenum-disulphide and sulphide additives.
Typical physical properties
Appearance
White color
Basc
Synthetic oil compound with organic thickener and combination of white solid lubricants
Unworked penetration
280-320
Specific gravity
1.2g/cc at 20°C
Dropping point
None
Base oil viscosity
21mm2/s at 40°C
Temperature range
-40°C~+1400°C
Friction value
0.10-0.13
Degree of corrosion
1-90
Depth of wear
0.3um
Salt spray test
>500 hours
Four-ball tester
3800/4000N
FUKKOL HEAT SINK COMPOUND APPLY FOR ELETRONIC
FUKKOL HEAT SINK COMPOUND APPLY FOR ELETRONIC
a metal oxide filled dielectric thermal transfer agent.
FUKKOL HEAT SINK COMPOUND APPLY FOR ELETRONIC
Description
Fukkol heat sink compound is a metal oxide filled dielectric thermal transfer agent. It is commonly used in electrical and electronic industries as a thermal transfer medium for facilitating heat dissipation between power components in electrical/electronic assemblies. And heat sink in the assembly process by filling the voids and gaps between the mated surfaces.
Characteristics
Temperature range
-40 °F(-40°C)to 400 °F(204°C)
Apperaance
White opaque
Bleed (204OC in 24 hrs)
1%MAX
NLGI Classification
1-2
Penetration (worked)
265-295
Evaporation(204OC in 24 hrs)
1%MAX
Water Resistance
Excellent
Thermal Conductivity
0.3
Specific Gravity
2.5
a metal oxide filled dielectric thermal transfer agent.
FUKKOL HEAT SINK COMPOUND APPLY FOR ELETRONIC
Description
Fukkol heat sink compound is a metal oxide filled dielectric thermal transfer agent. It is commonly used in electrical and electronic industries as a thermal transfer medium for facilitating heat dissipation between power components in electrical/electronic assemblies. And heat sink in the assembly process by filling the voids and gaps between the mated surfaces.
Characteristics
Temperature range
-40 °F(-40°C)to 400 °F(204°C)
Apperaance
White opaque
Bleed (204OC in 24 hrs)
1%MAX
NLGI Classification
1-2
Penetration (worked)
265-295
Evaporation(204OC in 24 hrs)
1%MAX
Water Resistance
Excellent
Thermal Conductivity
0.3
Specific Gravity
2.5
FUKKOL HICE Food Grade Cleaner For Compressors
Food Grade Cleaner For Compressors
Fast Drying
Leaves No Residue
Non-Conductive
Penetrates Quickly
Description:
Hice Food Grade Cleaner For Compressors is an innovative, non-chlorinated heavy duty degreaser that removes oil, grease and other contaminants. This fast evaporating solvent is excellent for use where rapid turnaround is necessary and low flashpoint solvents can be used. NSF H1 Registered can be used for food industry
Applications:
Recommended for use on motors, pumps, generators, hoists, compressors, mechanical equipment, corroded machinery, air tools, mechanical brakes & clutches, chains, wire ropes, bearings, dies and molds.
Features & Benefits:
• Fast Drying. Helps to minimize equipment downtime.
• Leaves No Residue. Reduces down-time by eliminating the need for wiping and rinsing.
• Non-Corrosive and Non-Staining. Will not mar or pit surfaces to be cleaned.
• Non-Conductive. Increases user safety by reducing the risk of fire.
• Penetrates Quickly. Removes oil, greases and other contaminants.
Fast Drying
Leaves No Residue
Non-Conductive
Penetrates Quickly
Description:
Hice Food Grade Cleaner For Compressors is an innovative, non-chlorinated heavy duty degreaser that removes oil, grease and other contaminants. This fast evaporating solvent is excellent for use where rapid turnaround is necessary and low flashpoint solvents can be used. NSF H1 Registered can be used for food industry
Applications:
Recommended for use on motors, pumps, generators, hoists, compressors, mechanical equipment, corroded machinery, air tools, mechanical brakes & clutches, chains, wire ropes, bearings, dies and molds.
Features & Benefits:
• Fast Drying. Helps to minimize equipment downtime.
• Leaves No Residue. Reduces down-time by eliminating the need for wiping and rinsing.
• Non-Corrosive and Non-Staining. Will not mar or pit surfaces to be cleaned.
• Non-Conductive. Increases user safety by reducing the risk of fire.
• Penetrates Quickly. Removes oil, greases and other contaminants.
FUKKOL HICE Food Grade Cleaner For Generators
Food Grade Cleaner For Generators
Fast Drying
Leaves No Residue
Non-Conductive
Penetrates Quickly
Description:
Hice Food Grade Cleaner For Generators is an innovative, non-chlorinated heavy duty degreaser that removes oil, grease and other contaminants. This fast evaporating solvent is excellent for use where rapid turnaround is necessary and low flashpoint solvents can be used. NSF H1 Registered can be used for food industry
Applications:
Recommended for use on motors, pumps, generators, hoists, compressors, mechanical equipment, corroded machinery, air tools, mechanical brakes & clutches, chains, wire ropes, bearings, dies and molds.
Features & Benefits:
• Fast Drying. Helps to minimize equipment downtime.
• Leaves No Residue. Reduces down-time by eliminating the need for wiping and rinsing.
• Non-Corrosive and Non-Staining. Will not mar or pit surfaces to be cleaned.
• Non-Conductive. Increases user safety by reducing the risk of fire.
• Penetrates Quickly. Removes oil, greases and other contaminants.
Fast Drying
Leaves No Residue
Non-Conductive
Penetrates Quickly
Description:
Hice Food Grade Cleaner For Generators is an innovative, non-chlorinated heavy duty degreaser that removes oil, grease and other contaminants. This fast evaporating solvent is excellent for use where rapid turnaround is necessary and low flashpoint solvents can be used. NSF H1 Registered can be used for food industry
Applications:
Recommended for use on motors, pumps, generators, hoists, compressors, mechanical equipment, corroded machinery, air tools, mechanical brakes & clutches, chains, wire ropes, bearings, dies and molds.
Features & Benefits:
• Fast Drying. Helps to minimize equipment downtime.
• Leaves No Residue. Reduces down-time by eliminating the need for wiping and rinsing.
• Non-Corrosive and Non-Staining. Will not mar or pit surfaces to be cleaned.
• Non-Conductive. Increases user safety by reducing the risk of fire.
• Penetrates Quickly. Removes oil, greases and other contaminants.
FUKKOL HICE Food Grade Cleaner For Hoists
Food Grade Cleaner For Hoists
Fast Drying
Leaves No Residue
Non-Conductive
Penetrates Quickly
Description:
Hice Food Grade Cleaner For Hoists is an innovative, non-chlorinated heavy duty degreaser that removes oil, grease and other contaminants. This fast evaporating solvent is excellent for use where rapid turnaround is necessary and low flashpoint solvents can be used. NSF H1 Registered can be used for food industry
Applications:
Recommended for use on motors, pumps, generators, hoists, compressors, mechanical equipment, corroded machinery, air tools, mechanical brakes & clutches, chains, wire ropes, bearings, dies and molds.
Features & Benefits:
• Fast Drying. Helps to minimize equipment downtime.
• Leaves No Residue. Reduces down-time by eliminating the need for wiping and rinsing.
• Non-Corrosive and Non-Staining. Will not mar or pit surfaces to be cleaned.
• Non-Conductive. Increases user safety by reducing the risk of fire.
• Penetrates Quickly. Removes oil, greases and other contaminants.
Fast Drying
Leaves No Residue
Non-Conductive
Penetrates Quickly
Description:
Hice Food Grade Cleaner For Hoists is an innovative, non-chlorinated heavy duty degreaser that removes oil, grease and other contaminants. This fast evaporating solvent is excellent for use where rapid turnaround is necessary and low flashpoint solvents can be used. NSF H1 Registered can be used for food industry
Applications:
Recommended for use on motors, pumps, generators, hoists, compressors, mechanical equipment, corroded machinery, air tools, mechanical brakes & clutches, chains, wire ropes, bearings, dies and molds.
Features & Benefits:
• Fast Drying. Helps to minimize equipment downtime.
• Leaves No Residue. Reduces down-time by eliminating the need for wiping and rinsing.
• Non-Corrosive and Non-Staining. Will not mar or pit surfaces to be cleaned.
• Non-Conductive. Increases user safety by reducing the risk of fire.
• Penetrates Quickly. Removes oil, greases and other contaminants.
5 Liter Dexron III Automatic Transmission Fluid
1.Atomatic Tansmission Fluid
2.Dexron III
3.Excellent quality as original U.S.A. brands
4.Reasonable rice
5.For hydraulic
5 Liter Dexron III Automatic Transmission Fluid
Automatic Transmission Fluid(Dexron III)
1) Excellent quality as original U.S.A. brands and reasonable price of Automatic Transmission Fluid (Dexron III) is your best choice.
2) This multi-purpose, high performance automatic transmission fluid Meets DEXRON-III(General Motors) and MERCON(fORD Motor) Specifications.
3) It is also recommended for power steering and hydraulic systems requiring Allison C-3, C-4 and Caterpillar TO-2 type fluids.
DESCRIPTION
Automatic Transmission Fluid(DEXRONIII)
Material Can
Plastic Bottle
PART NO.
PE-330-5
GROSS WEIGHT
5L
NET WEIGHT
4250g
PCS/CTN
6
Carton Size
D50*W34*H32(cm)
G.W./CTN
28
CBM/CTN
0.054
CTN/20'
519
CTN/40'
1185
2.Dexron III
3.Excellent quality as original U.S.A. brands
4.Reasonable rice
5.For hydraulic
5 Liter Dexron III Automatic Transmission Fluid
Automatic Transmission Fluid(Dexron III)
1) Excellent quality as original U.S.A. brands and reasonable price of Automatic Transmission Fluid (Dexron III) is your best choice.
2) This multi-purpose, high performance automatic transmission fluid Meets DEXRON-III(General Motors) and MERCON(fORD Motor) Specifications.
3) It is also recommended for power steering and hydraulic systems requiring Allison C-3, C-4 and Caterpillar TO-2 type fluids.
DESCRIPTION
Automatic Transmission Fluid(DEXRONIII)
Material Can
Plastic Bottle
PART NO.
PE-330-5
GROSS WEIGHT
5L
NET WEIGHT
4250g
PCS/CTN
6
Carton Size
D50*W34*H32(cm)
G.W./CTN
28
CBM/CTN
0.054
CTN/20'
519
CTN/40'
1185
FUKKOL HICE Food Grade Cleaner For Motor
Food Grade Cleaner For Motor
Fast Drying
Leaves No Residue
Non-Conductive
Penetrates Quickly
Description:
Hice Food Grade Cleaner For Motor is an innovative, non-chlorinated heavy duty degreaser that removes oil, grease and other contaminants. This fast evaporating solvent is excellent for use where rapid turnaround is necessary and low flashpoint solvents can be used. NSF H1 Registered can be used for food industry
Applications:
Recommended for use on motors, pumps, generators, hoists, compressors, mechanical equipment, corroded machinery, air tools, mechanical brakes & clutches, chains, wire ropes, bearings, dies and molds.
Features & Benefits:
• Fast Drying. Helps to minimize equipment downtime.
• Leaves No Residue. Reduces down-time by eliminating the need for wiping and rinsing.
• Non-Corrosive and Non-Staining. Will not mar or pit surfaces to be cleaned.
• Non-Conductive. Increases user safety by reducing the risk of fire.
• Penetrates Quickly. Removes oil, greases and other contaminants.
Fast Drying
Leaves No Residue
Non-Conductive
Penetrates Quickly
Description:
Hice Food Grade Cleaner For Motor is an innovative, non-chlorinated heavy duty degreaser that removes oil, grease and other contaminants. This fast evaporating solvent is excellent for use where rapid turnaround is necessary and low flashpoint solvents can be used. NSF H1 Registered can be used for food industry
Applications:
Recommended for use on motors, pumps, generators, hoists, compressors, mechanical equipment, corroded machinery, air tools, mechanical brakes & clutches, chains, wire ropes, bearings, dies and molds.
Features & Benefits:
• Fast Drying. Helps to minimize equipment downtime.
• Leaves No Residue. Reduces down-time by eliminating the need for wiping and rinsing.
• Non-Corrosive and Non-Staining. Will not mar or pit surfaces to be cleaned.
• Non-Conductive. Increases user safety by reducing the risk of fire.
• Penetrates Quickly. Removes oil, greases and other contaminants.
FUKKOL HICE Food Grade Cleaner For Pumps
Food Grade Cleaner For Pumps
Fast Drying
Leaves No Residue
Non-Conductive
Penetrates Quickly
Description:
Hice Food Grade Cleaner For Pumps is an innovative, non-chlorinated heavy duty degreaser that removes oil, grease and other contaminants. This fast evaporating solvent is excellent for use where rapid turnaround is necessary and low flashpoint solvents can be used. NSF H1 Registered can be used for food industry
Applications:
Recommended for use on motors, pumps, generators, hoists, compressors, mechanical equipment, corroded machinery, air tools, mechanical brakes & clutches, chains, wire ropes, bearings, dies and molds.
Features & Benefits:
• Fast Drying. Helps to minimize equipment downtime.
• Leaves No Residue. Reduces down-time by eliminating the need for wiping and rinsing.
• Non-Corrosive and Non-Staining. Will not mar or pit surfaces to be cleaned.
• Non-Conductive. Increases user safety by reducing the risk of fire.
• Penetrates Quickly. Removes oil, greases and other contaminants.
Fast Drying
Leaves No Residue
Non-Conductive
Penetrates Quickly
Description:
Hice Food Grade Cleaner For Pumps is an innovative, non-chlorinated heavy duty degreaser that removes oil, grease and other contaminants. This fast evaporating solvent is excellent for use where rapid turnaround is necessary and low flashpoint solvents can be used. NSF H1 Registered can be used for food industry
Applications:
Recommended for use on motors, pumps, generators, hoists, compressors, mechanical equipment, corroded machinery, air tools, mechanical brakes & clutches, chains, wire ropes, bearings, dies and molds.
Features & Benefits:
• Fast Drying. Helps to minimize equipment downtime.
• Leaves No Residue. Reduces down-time by eliminating the need for wiping and rinsing.
• Non-Corrosive and Non-Staining. Will not mar or pit surfaces to be cleaned.
• Non-Conductive. Increases user safety by reducing the risk of fire.
• Penetrates Quickly. Removes oil, greases and other contaminants.
FUKKOL HICE Food Grade Cleaner
HICE Food Grade Cleaner
Fast Drying
Leaves No Residue
Non-Conductive
Penetrates Quickly
Description:
Hice Food Grade Cleaner is an innovative, non-chlorinated heavy duty degreaser that removes oil, grease and other contaminants. This fast evaporating solvent is excellent for use where rapid turnaround is necessary and low flashpoint solvents can be used. NSF H1 Registered can be used for food industry
Applications:
Recommended for use on motors, pumps, generators, hoists, compressors, mechanical equipment, corroded machinery, air tools, mechanical brakes & clutches, chains, wire ropes, bearings, dies and molds.
Features & Benefits:
• Fast Drying. Helps to minimize equipment downtime.
• Leaves No Residue. Reduces down-time by eliminating the need for wiping and rinsing.
• Non-Corrosive and Non-Staining. Will not mar or pit surfaces to be cleaned.
• Non-Conductive. Increases user safety by reducing the risk of fire.
• Penetrates Quickly. Removes oil, greases and other contaminants.
Fast Drying
Leaves No Residue
Non-Conductive
Penetrates Quickly
Description:
Hice Food Grade Cleaner is an innovative, non-chlorinated heavy duty degreaser that removes oil, grease and other contaminants. This fast evaporating solvent is excellent for use where rapid turnaround is necessary and low flashpoint solvents can be used. NSF H1 Registered can be used for food industry
Applications:
Recommended for use on motors, pumps, generators, hoists, compressors, mechanical equipment, corroded machinery, air tools, mechanical brakes & clutches, chains, wire ropes, bearings, dies and molds.
Features & Benefits:
• Fast Drying. Helps to minimize equipment downtime.
• Leaves No Residue. Reduces down-time by eliminating the need for wiping and rinsing.
• Non-Corrosive and Non-Staining. Will not mar or pit surfaces to be cleaned.
• Non-Conductive. Increases user safety by reducing the risk of fire.
• Penetrates Quickly. Removes oil, greases and other contaminants.
FUKKOL HICE Food Grade Degreaser Spray
Food Grade Degreaser Spray
Fast Drying
Leaves No Residue
Non-Conductive
Penetrates Quickly
Description:
Hice Food Grade Degreaser Spray is an innovative, non-chlorinated heavy duty degreaser that removes oil, grease and other contaminants. This fast evaporating solvent is excellent for use where rapid turnaround is necessary and low flashpoint solvents can be used. NSF H1 Registered can be used for food industry
Applications:
Recommended for use on motors, pumps, generators, hoists, compressors, mechanical equipment, corroded machinery, air tools, mechanical brakes & clutches, chains, wire ropes, bearings, dies and molds.
Features & Benefits:
• Fast Drying. Helps to minimize equipment downtime.
• Leaves No Residue. Reduces down-time by eliminating the need for wiping and rinsing.
• Non-Corrosive and Non-Staining. Will not mar or pit surfaces to be cleaned.
• Non-Conductive. Increases user safety by reducing the risk of fire.
• Penetrates Quickly. Removes oil, greases and other contaminants.
Fast Drying
Leaves No Residue
Non-Conductive
Penetrates Quickly
Description:
Hice Food Grade Degreaser Spray is an innovative, non-chlorinated heavy duty degreaser that removes oil, grease and other contaminants. This fast evaporating solvent is excellent for use where rapid turnaround is necessary and low flashpoint solvents can be used. NSF H1 Registered can be used for food industry
Applications:
Recommended for use on motors, pumps, generators, hoists, compressors, mechanical equipment, corroded machinery, air tools, mechanical brakes & clutches, chains, wire ropes, bearings, dies and molds.
Features & Benefits:
• Fast Drying. Helps to minimize equipment downtime.
• Leaves No Residue. Reduces down-time by eliminating the need for wiping and rinsing.
• Non-Corrosive and Non-Staining. Will not mar or pit surfaces to be cleaned.
• Non-Conductive. Increases user safety by reducing the risk of fire.
• Penetrates Quickly. Removes oil, greases and other contaminants.
FUKKOL HICE Food Grade Electra Clean Spray
Food Grade Electra Clean Spray
Fast Drying
Leaves No Residue
Non-Conductive
Penetrates Quickly
Description:
Hice Food Grade Electra Clean Spray is an innovative, non-chlorinated heavy duty degreaser that removes oil, grease and other contaminants. This fast evaporating solvent is excellent for use where rapid turnaround is necessary and low flashpoint solvents can be used. NSF H1 Registered can be used for food industry
Applications:
Recommended for use on motors, pumps, generators, hoists, compressors, mechanical equipment, corroded machinery, air tools, mechanical brakes & clutches, chains, wire ropes, bearings, dies and molds.
Features & Benefits:
• Fast Drying. Helps to minimize equipment downtime.
• Leaves No Residue. Reduces down-time by eliminating the need for wiping and rinsing.
• Non-Corrosive and Non-Staining. Will not mar or pit surfaces to be cleaned.
• Non-Conductive. Increases user safety by reducing the risk of fire.
• Penetrates Quickly. Removes oil, greases and other contaminants.
Fast Drying
Leaves No Residue
Non-Conductive
Penetrates Quickly
Description:
Hice Food Grade Electra Clean Spray is an innovative, non-chlorinated heavy duty degreaser that removes oil, grease and other contaminants. This fast evaporating solvent is excellent for use where rapid turnaround is necessary and low flashpoint solvents can be used. NSF H1 Registered can be used for food industry
Applications:
Recommended for use on motors, pumps, generators, hoists, compressors, mechanical equipment, corroded machinery, air tools, mechanical brakes & clutches, chains, wire ropes, bearings, dies and molds.
Features & Benefits:
• Fast Drying. Helps to minimize equipment downtime.
• Leaves No Residue. Reduces down-time by eliminating the need for wiping and rinsing.
• Non-Corrosive and Non-Staining. Will not mar or pit surfaces to be cleaned.
• Non-Conductive. Increases user safety by reducing the risk of fire.
• Penetrates Quickly. Removes oil, greases and other contaminants.
FUKKOL HICE Food Grade Grease Remover Spray
Food Grade Grease Remover Spray
Fast Drying
Leaves No Residue
Non-Conductive
Penetrates Quickly
Description:
Hice Food Grade Grease Remover Spray is an innovative, non-chlorinated heavy duty degreaser that removes oil, grease and other contaminants. This fast evaporating solvent is excellent for use where rapid turnaround is necessary and low flashpoint solvents can be used. NSF H1 Registered can be used for food industry
Applications:
Recommended for use on motors, pumps, generators, hoists, compressors, mechanical equipment, corroded machinery, air tools, mechanical brakes & clutches, chains, wire ropes, bearings, dies and molds.
Features & Benefits:
• Fast Drying. Helps to minimize equipment downtime.
• Leaves No Residue. Reduces down-time by eliminating the need for wiping and rinsing.
• Non-Corrosive and Non-Staining. Will not mar or pit surfaces to be cleaned.
• Non-Conductive. Increases user safety by reducing the risk of fire.
• Penetrates Quickly. Removes oil, greases and other contaminants.
Fast Drying
Leaves No Residue
Non-Conductive
Penetrates Quickly
Description:
Hice Food Grade Grease Remover Spray is an innovative, non-chlorinated heavy duty degreaser that removes oil, grease and other contaminants. This fast evaporating solvent is excellent for use where rapid turnaround is necessary and low flashpoint solvents can be used. NSF H1 Registered can be used for food industry
Applications:
Recommended for use on motors, pumps, generators, hoists, compressors, mechanical equipment, corroded machinery, air tools, mechanical brakes & clutches, chains, wire ropes, bearings, dies and molds.
Features & Benefits:
• Fast Drying. Helps to minimize equipment downtime.
• Leaves No Residue. Reduces down-time by eliminating the need for wiping and rinsing.
• Non-Corrosive and Non-Staining. Will not mar or pit surfaces to be cleaned.
• Non-Conductive. Increases user safety by reducing the risk of fire.
• Penetrates Quickly. Removes oil, greases and other contaminants.
FUKKOL HICE Food Grade Oil Remover Spray
Food Grade Oil Remover Spray
Fast Drying
Leaves No Residue
Non-Conductive
Penetrates Quickly
Description:
Hice Food Grade Oil Remover Spray is an innovative, non-chlorinated heavy duty degreaser that removes oil, grease and other contaminants. This fast evaporating solvent is excellent for use where rapid turnaround is necessary and low flashpoint solvents can be used. NSF H1 Registered can be used for food industry
Applications:
Recommended for use on motors, pumps, generators, hoists, compressors, mechanical equipment, corroded machinery, air tools, mechanical brakes & clutches, chains, wire ropes, bearings, dies and molds.
Features & Benefits:
• Fast Drying. Helps to minimize equipment downtime.
• Leaves No Residue. Reduces down-time by eliminating the need for wiping and rinsing.
• Non-Corrosive and Non-Staining. Will not mar or pit surfaces to be cleaned.
• Non-Conductive. Increases user safety by reducing the risk of fire.
• Penetrates Quickly. Removes oil, greases and other contaminants.
Fast Drying
Leaves No Residue
Non-Conductive
Penetrates Quickly
Description:
Hice Food Grade Oil Remover Spray is an innovative, non-chlorinated heavy duty degreaser that removes oil, grease and other contaminants. This fast evaporating solvent is excellent for use where rapid turnaround is necessary and low flashpoint solvents can be used. NSF H1 Registered can be used for food industry
Applications:
Recommended for use on motors, pumps, generators, hoists, compressors, mechanical equipment, corroded machinery, air tools, mechanical brakes & clutches, chains, wire ropes, bearings, dies and molds.
Features & Benefits:
• Fast Drying. Helps to minimize equipment downtime.
• Leaves No Residue. Reduces down-time by eliminating the need for wiping and rinsing.
• Non-Corrosive and Non-Staining. Will not mar or pit surfaces to be cleaned.
• Non-Conductive. Increases user safety by reducing the risk of fire.
• Penetrates Quickly. Removes oil, greases and other contaminants.
FUKKOL HICE Food Grade Rapid Dry Cleaner
Food Grade Rapid Dry Cleaner
Fast Drying
Leaves No Residue
Non-Conductive
Penetrates Quickly
Description:
Hice Food Grade Rapid Dry Cleaner is an innovative, non-chlorinated heavy duty degreaser that removes oil, grease and other contaminants. This fast evaporating solvent is excellent for use where rapid turnaround is necessary and low flashpoint solvents can be used. NSF H1 Registered can be used for food industry
Applications:
Recommended for use on motors, pumps, generators, hoists, compressors, mechanical equipment, corroded machinery, air tools, mechanical brakes & clutches, chains, wire ropes, bearings, dies and molds.
Features & Benefits:
• Fast Drying. Helps to minimize equipment downtime.
• Leaves No Residue. Reduces down-time by eliminating the need for wiping and rinsing.
• Non-Corrosive and Non-Staining. Will not mar or pit surfaces to be cleaned.
• Non-Conductive. Increases user safety by reducing the risk of fire.
• Penetrates Quickly. Removes oil, greases and other contaminants.
Fast Drying
Leaves No Residue
Non-Conductive
Penetrates Quickly
Description:
Hice Food Grade Rapid Dry Cleaner is an innovative, non-chlorinated heavy duty degreaser that removes oil, grease and other contaminants. This fast evaporating solvent is excellent for use where rapid turnaround is necessary and low flashpoint solvents can be used. NSF H1 Registered can be used for food industry
Applications:
Recommended for use on motors, pumps, generators, hoists, compressors, mechanical equipment, corroded machinery, air tools, mechanical brakes & clutches, chains, wire ropes, bearings, dies and molds.
Features & Benefits:
• Fast Drying. Helps to minimize equipment downtime.
• Leaves No Residue. Reduces down-time by eliminating the need for wiping and rinsing.
• Non-Corrosive and Non-Staining. Will not mar or pit surfaces to be cleaned.
• Non-Conductive. Increases user safety by reducing the risk of fire.
• Penetrates Quickly. Removes oil, greases and other contaminants.
FUKKOL HICE Food Grade Remover Spray
Food Grade Remover Spray
Fast Drying
Leaves No Residue
Non-Conductive
Penetrates Quickly
Description:
Hice Food Grade Remover Spray is an innovative, non-chlorinated heavy duty degreaser that removes oil, grease and other contaminants. This fast evaporating solvent is excellent for use where rapid turnaround is necessary and low flashpoint solvents can be used. NSF H1 Registered can be used for food industry
Applications:
Recommended for use on motors, pumps, generators, hoists, compressors, mechanical equipment, corroded machinery, air tools, mechanical brakes & clutches, chains, wire ropes, bearings, dies and molds.
Features & Benefits:
• Fast Drying. Helps to minimize equipment downtime.
• Leaves No Residue. Reduces down-time by eliminating the need for wiping and rinsing.
• Non-Corrosive and Non-Staining. Will not mar or pit surfaces to be cleaned.
• Non-Conductive. Increases user safety by reducing the risk of fire.
• Penetrates Quickly. Removes oil, greases and other contaminants.
Fast Drying
Leaves No Residue
Non-Conductive
Penetrates Quickly
Description:
Hice Food Grade Remover Spray is an innovative, non-chlorinated heavy duty degreaser that removes oil, grease and other contaminants. This fast evaporating solvent is excellent for use where rapid turnaround is necessary and low flashpoint solvents can be used. NSF H1 Registered can be used for food industry
Applications:
Recommended for use on motors, pumps, generators, hoists, compressors, mechanical equipment, corroded machinery, air tools, mechanical brakes & clutches, chains, wire ropes, bearings, dies and molds.
Features & Benefits:
• Fast Drying. Helps to minimize equipment downtime.
• Leaves No Residue. Reduces down-time by eliminating the need for wiping and rinsing.
• Non-Corrosive and Non-Staining. Will not mar or pit surfaces to be cleaned.
• Non-Conductive. Increases user safety by reducing the risk of fire.
• Penetrates Quickly. Removes oil, greases and other contaminants.
FUKKOL HYDRO Guard
FUKKOL HYDRO Guard
Fire resistance for improved safety
Long pup life
Good all-temperature performance
FUKKOL HYDRO Guard
Description
Water-glycol fire-resistant fluid containing anti-wear agents and rust inhibitors for use
in high pressure hydraulic systems where the requirements for fire resistance,
pump wear protection and viscosity are satisfied by water-glycol fluids.
Applications:
*Hydraulic systems with: gear pumps(up to 14 Mpa); vane pups(up to 14 Mpa);
axial piston pups(up to 20 Mpa); operating temperature below 65°C * lnjection molding
equipment * Metal die casting equipment * Hot metal presses * Welding machines *
Hydraulic pressure guns * Hydraulic stretchers * Furnace and oven doors
*Steel mill hydraulic equipment(slag granulators, down coilers in hot strip mills,
tipping ladles, continuous casting equipment,etc.)* Mobile equipment operating in fire risk areas.
Performance Characteristics
*Fire resistance for improved safety: Glycol/wate mix
(approximately 40% water provides a non-flammable mist or spray so that,
should a hydraulic hose rupture, the luid will not support combustion
*Long pup life: Special anti-wear agents protect high ressure
pumps from excessive wear, saving on costly repairs.
*Trouble-free operation: Effective rust inhibitors provide ood rust protection both
in the fluid immersed sections of the system and in the vapor spaces where condensed
water typically collects, thus avoiding rust debris contamination which can adversely
affect system operating efficiency.
*Good all-temperature performance: The glycol /water solution enables the fluid to dissipate
heat quickly and keep the system temperature in control, thereby avoiding hot spots.
The low freezing point reduces the risk of hydraulic fluid freezing in low temperature operation,
with subsequent damage to the equipment.
Typical physical properties
ISO GRADE
Density ,kg/L@15°C
Viscosity
Pour Point (°C)
PH
Water vol ,%
46
1~1.15
41.2~50.6
-45
8.5~9.8
40
Fire resistance for improved safety
Long pup life
Good all-temperature performance
FUKKOL HYDRO Guard
Description
Water-glycol fire-resistant fluid containing anti-wear agents and rust inhibitors for use
in high pressure hydraulic systems where the requirements for fire resistance,
pump wear protection and viscosity are satisfied by water-glycol fluids.
Applications:
*Hydraulic systems with: gear pumps(up to 14 Mpa); vane pups(up to 14 Mpa);
axial piston pups(up to 20 Mpa); operating temperature below 65°C * lnjection molding
equipment * Metal die casting equipment * Hot metal presses * Welding machines *
Hydraulic pressure guns * Hydraulic stretchers * Furnace and oven doors
*Steel mill hydraulic equipment(slag granulators, down coilers in hot strip mills,
tipping ladles, continuous casting equipment,etc.)* Mobile equipment operating in fire risk areas.
Performance Characteristics
*Fire resistance for improved safety: Glycol/wate mix
(approximately 40% water provides a non-flammable mist or spray so that,
should a hydraulic hose rupture, the luid will not support combustion
*Long pup life: Special anti-wear agents protect high ressure
pumps from excessive wear, saving on costly repairs.
*Trouble-free operation: Effective rust inhibitors provide ood rust protection both
in the fluid immersed sections of the system and in the vapor spaces where condensed
water typically collects, thus avoiding rust debris contamination which can adversely
affect system operating efficiency.
*Good all-temperature performance: The glycol /water solution enables the fluid to dissipate
heat quickly and keep the system temperature in control, thereby avoiding hot spots.
The low freezing point reduces the risk of hydraulic fluid freezing in low temperature operation,
with subsequent damage to the equipment.
Typical physical properties
ISO GRADE
Density ,kg/L@15°C
Viscosity
Pour Point (°C)
PH
Water vol ,%
46
1~1.15
41.2~50.6
-45
8.5~9.8
40
5 Liter DexronIII Automatic Transmission Fluid
1.Atomatic Tansmission Fluid
2.5 Liter
3.Dexron III
4.High Quality
5.Competitive Price
5 Liter DexronIII Automatic Transmission Fluid
Automatic Transmission Fluid
1) Excellent quality as original U.S.A. brands and reasonable price of Automatic Transmission Fluid (Dexron III) is your best choice.
2) This multi-purpose, high performance automatic transmission fluid Meets DEXRON-III(General Motors) and MERCON(fORD Motor) Specifications.
3) It is also recommended for power steering and hydraulic systems requiring Allison C-3, C-4 and Caterpillar TO-2 type fluids.
DESCRIPTION
Automatic Transmission Fluid(Type A)
Material Can
Plastic Bottle
PART NO.
PE-220-5
GROSS WEIGHT
5L
NET WEIGHT
4250g
PCS/CTN
6
Carton Size
D50*W34*H32(cm)
G.W./CTN
28
CBM/CTN
0.054
CTN/20'
519
CTN/40'
1185
2.5 Liter
3.Dexron III
4.High Quality
5.Competitive Price
5 Liter DexronIII Automatic Transmission Fluid
Automatic Transmission Fluid
1) Excellent quality as original U.S.A. brands and reasonable price of Automatic Transmission Fluid (Dexron III) is your best choice.
2) This multi-purpose, high performance automatic transmission fluid Meets DEXRON-III(General Motors) and MERCON(fORD Motor) Specifications.
3) It is also recommended for power steering and hydraulic systems requiring Allison C-3, C-4 and Caterpillar TO-2 type fluids.
DESCRIPTION
Automatic Transmission Fluid(Type A)
Material Can
Plastic Bottle
PART NO.
PE-220-5
GROSS WEIGHT
5L
NET WEIGHT
4250g
PCS/CTN
6
Carton Size
D50*W34*H32(cm)
G.W./CTN
28
CBM/CTN
0.054
CTN/20'
519
CTN/40'
1185
FUKKOL Hardened Oil
FUKKOL Hardened Oil
Excellent cooling ability
Safe in operation due to high flash point
Good hardening characteristics
FUKKOL Hardened Oil
Description
Fukkol vitex is a high flash point refined oil which provides an efficient hardening process as well as a desirable hardness of the steel .This is a good quality oil which is highly heat resistance while oxidation and acidity inhibitor can prolong the oil life, with little or no effect on viscosity and acidity increase. In addition, it prolongs the tools life after the quenching procedure.
Application
suitable for heating treatment of mould making and machine parts.
Benefits
Excellent cooling ability .
Safe in operation due to high flash point.
Good hardening characteristics .
Superior thermal stability.
Excellent cooling ability
Safe in operation due to high flash point
Good hardening characteristics
FUKKOL Hardened Oil
Description
Fukkol vitex is a high flash point refined oil which provides an efficient hardening process as well as a desirable hardness of the steel .This is a good quality oil which is highly heat resistance while oxidation and acidity inhibitor can prolong the oil life, with little or no effect on viscosity and acidity increase. In addition, it prolongs the tools life after the quenching procedure.
Application
suitable for heating treatment of mould making and machine parts.
Benefits
Excellent cooling ability .
Safe in operation due to high flash point.
Good hardening characteristics .
Superior thermal stability.
FUKKOL Hardening Oil
FUKKOL Hardening Oil
Excellent cooling ability
Safe in operation due to high flash point
Good hardening characteristics
FUKKOL Hardening Oil
Description
Fukkol vitex is a high flash point refined oil which provides an efficient hardening process as well as a desirable hardness of the steel .This is a good quality oil which is highly heat resistance while oxidation and acidity inhibitor can prolong the oil life, with little or no effect on viscosity and acidity increase. In addition, it prolongs the tools life after the quenching procedure.
Application
suitable for heating treatment of mould making and machine parts.
Benefits
Excellent cooling ability .
Safe in operation due to high flash point.
Good hardening characteristics .
Superior thermal stability.
Excellent cooling ability
Safe in operation due to high flash point
Good hardening characteristics
FUKKOL Hardening Oil
Description
Fukkol vitex is a high flash point refined oil which provides an efficient hardening process as well as a desirable hardness of the steel .This is a good quality oil which is highly heat resistance while oxidation and acidity inhibitor can prolong the oil life, with little or no effect on viscosity and acidity increase. In addition, it prolongs the tools life after the quenching procedure.
Application
suitable for heating treatment of mould making and machine parts.
Benefits
Excellent cooling ability .
Safe in operation due to high flash point.
Good hardening characteristics .
Superior thermal stability.
FUKKOL Harmless Mould Oily Release Silicone Spray
it,s with no additive no additive is a high-purity release agent containing no substance harmful to human bodies.
Product Information
FUKKOL MOULD RELEASE AGENT(NON - PAINTBLE) with no additive is a high-purity release agent containing no substance harmful to human bodies.It enjoys excellent thermal stability with in 300°C warking temperature and can be used with precision and complex molds with multiple slides and snap joints.Its specially designed nozzle provides a very fine spray pattern which allows the quantity applied to be fully controlled and the most complicated dies to be completely covered.
Virtue
-Ultra fine spray gives controlled application with complete coverage
-Improved finish and reduced risk of over application
-Reduces problems associated with marking and transfer, highly economical, efficient release, only one pass required for many shots of ejection
-Effective and long lasting film provides more numbers of release than most silicone formulations
-Low environmental impact, contains no CFC propellant
Non staining property makes it an excellent lubricant for textile and paper industry.
Product Information
FUKKOL MOULD RELEASE AGENT(NON - PAINTBLE) with no additive is a high-purity release agent containing no substance harmful to human bodies.It enjoys excellent thermal stability with in 300°C warking temperature and can be used with precision and complex molds with multiple slides and snap joints.Its specially designed nozzle provides a very fine spray pattern which allows the quantity applied to be fully controlled and the most complicated dies to be completely covered.
Virtue
-Ultra fine spray gives controlled application with complete coverage
-Improved finish and reduced risk of over application
-Reduces problems associated with marking and transfer, highly economical, efficient release, only one pass required for many shots of ejection
-Effective and long lasting film provides more numbers of release than most silicone formulations
-Low environmental impact, contains no CFC propellant
Non staining property makes it an excellent lubricant for textile and paper industry.
FUKKOL Heat Sink Compound Grease White Color
FUKKOL Heat Sink Compound Grease White Color
a metal oxide filled dielectric thermal transfer agent.
FUKKOL Heat Sink Compound Grease White Color
Description
Fukkol heat sink compound is a metal oxide filled dielectric thermal transfer agent. It is commonly used in electrical and electronic industries as a thermal transfer medium for facilitating heat dissipation between power components in electrical/electronic assemblies. And heat sink in the assembly process by filling the voids and gaps between the mated surfaces.
Characteristics
Temperature range
-40 °F(-40°C)to 400 °F(204°C)
Apperaance
White opaque
Bleed (204OC in 24 hrs)
1%MAX
NLGI Classification
1-2
Penetration (worked)
265-295
Evaporation(204OC in 24 hrs)
1%MAX
Water Resistance
Excellent
Thermal Conductivity
0.3
Specific Gravity
2.5
a metal oxide filled dielectric thermal transfer agent.
FUKKOL Heat Sink Compound Grease White Color
Description
Fukkol heat sink compound is a metal oxide filled dielectric thermal transfer agent. It is commonly used in electrical and electronic industries as a thermal transfer medium for facilitating heat dissipation between power components in electrical/electronic assemblies. And heat sink in the assembly process by filling the voids and gaps between the mated surfaces.
Characteristics
Temperature range
-40 °F(-40°C)to 400 °F(204°C)
Apperaance
White opaque
Bleed (204OC in 24 hrs)
1%MAX
NLGI Classification
1-2
Penetration (worked)
265-295
Evaporation(204OC in 24 hrs)
1%MAX
Water Resistance
Excellent
Thermal Conductivity
0.3
Specific Gravity
2.5
FUKKOL Heat Sink Compound Grease apply for CPU
FUKKOL Heat Sink Compound Grease apply for CPU
a metal oxide filled dielectric thermal transfer agent.
FUKKOL Heat Sink Compound Grease apply for CPU
Description
Fukkol heat sink compound is a metal oxide filled dielectric thermal transfer agent. It is commonly used in electrical and electronic industries as a thermal transfer medium for facilitating heat dissipation between power components in electrical/electronic assemblies. And heat sink in the assembly process by filling the voids and gaps between the mated surfaces.
Characteristics
Temperature range
-40 °F(-40°C)to 400 °F(204°C)
Apperaance
White opaque
Bleed (204OC in 24 hrs)
1%MAX
NLGI Classification
1-2
Penetration (worked)
265-295
Evaporation(204OC in 24 hrs)
1%MAX
Water Resistance
Excellent
Thermal Conductivity
0.3
Specific Gravity
2.5
a metal oxide filled dielectric thermal transfer agent.
FUKKOL Heat Sink Compound Grease apply for CPU
Description
Fukkol heat sink compound is a metal oxide filled dielectric thermal transfer agent. It is commonly used in electrical and electronic industries as a thermal transfer medium for facilitating heat dissipation between power components in electrical/electronic assemblies. And heat sink in the assembly process by filling the voids and gaps between the mated surfaces.
Characteristics
Temperature range
-40 °F(-40°C)to 400 °F(204°C)
Apperaance
White opaque
Bleed (204OC in 24 hrs)
1%MAX
NLGI Classification
1-2
Penetration (worked)
265-295
Evaporation(204OC in 24 hrs)
1%MAX
Water Resistance
Excellent
Thermal Conductivity
0.3
Specific Gravity
2.5
FUKKOL Heat Sink Compound Grease apply for Computer
FUKKOL Heat Sink Compound Grease apply for Computer
a metal oxide filled dielectric thermal transfer agent.
FUKKOL Heat Sink Compound Grease apply for Computer
Description
Fukkol heat sink compound is a metal oxide filled dielectric thermal transfer agent. It is commonly used in electrical and electronic industries as a thermal transfer medium for facilitating heat dissipation between power components in electrical/electronic assemblies. And heat sink in the assembly process by filling the voids and gaps between the mated surfaces.
Characteristics
Temperature range
-40 °F(-40°C)to 400 °F(204°C)
Apperaance
White opaque
Bleed (204OC in 24 hrs)
1%MAX
NLGI Classification
1-2
Penetration (worked)
265-295
Evaporation(204OC in 24 hrs)
1%MAX
Water Resistance
Excellent
Thermal Conductivity
0.3
Specific Gravity
2.5
a metal oxide filled dielectric thermal transfer agent.
FUKKOL Heat Sink Compound Grease apply for Computer
Description
Fukkol heat sink compound is a metal oxide filled dielectric thermal transfer agent. It is commonly used in electrical and electronic industries as a thermal transfer medium for facilitating heat dissipation between power components in electrical/electronic assemblies. And heat sink in the assembly process by filling the voids and gaps between the mated surfaces.
Characteristics
Temperature range
-40 °F(-40°C)to 400 °F(204°C)
Apperaance
White opaque
Bleed (204OC in 24 hrs)
1%MAX
NLGI Classification
1-2
Penetration (worked)
265-295
Evaporation(204OC in 24 hrs)
1%MAX
Water Resistance
Excellent
Thermal Conductivity
0.3
Specific Gravity
2.5
FUKKOL Heat Sink Compound Grease apply for VGA Cooler
FUKKOL Heat Sink Compound Grease apply for VGA Cooler
a metal oxide filled dielectric thermal transfer agent.
FUKKOL Heat Sink Compound Grease apply for VGA Cooler
Description
Fukkol heat sink compound is a metal oxide filled dielectric thermal transfer agent. It is commonly used in electrical and electronic industries as a thermal transfer medium for facilitating heat dissipation between power components in electrical/electronic assemblies. And heat sink in the assembly process by filling the voids and gaps between the mated surfaces.
Characteristics
Temperature range
-40 °F(-40°C)to 400 °F(204°C)
Apperaance
White opaque
Bleed (204OC in 24 hrs)
1%MAX
NLGI Classification
1-2
Penetration (worked)
265-295
Evaporation(204OC in 24 hrs)
1%MAX
Water Resistance
Excellent
Thermal Conductivity
0.3
Specific Gravity
2.5
a metal oxide filled dielectric thermal transfer agent.
FUKKOL Heat Sink Compound Grease apply for VGA Cooler
Description
Fukkol heat sink compound is a metal oxide filled dielectric thermal transfer agent. It is commonly used in electrical and electronic industries as a thermal transfer medium for facilitating heat dissipation between power components in electrical/electronic assemblies. And heat sink in the assembly process by filling the voids and gaps between the mated surfaces.
Characteristics
Temperature range
-40 °F(-40°C)to 400 °F(204°C)
Apperaance
White opaque
Bleed (204OC in 24 hrs)
1%MAX
NLGI Classification
1-2
Penetration (worked)
265-295
Evaporation(204OC in 24 hrs)
1%MAX
Water Resistance
Excellent
Thermal Conductivity
0.3
Specific Gravity
2.5
FUKKOL Heat Sink Compound Grease in Electronic
FUKKOL Heat Sink Compound Grease White Color in Electronic
a metal oxide filled dielectric thermal transfer agent.
FUKKOL Heat Sink Compound Grease White Color in Electronic
Description
Fukkol heat sink compound is a metal oxide filled dielectric thermal transfer agent. It is commonly used in electrical and electronic industries as a thermal transfer medium for facilitating heat dissipation between power components in electrical/electronic assemblies. And heat sink in the assembly process by filling the voids and gaps between the mated surfaces.
Characteristics
Temperature range
-40 °F(-40°C)to 400 °F(204°C)
Apperaance
White opaque
Bleed (204OC in 24 hrs)
1%MAX
NLGI Classification
1-2
Penetration (worked)
265-295
Evaporation(204OC in 24 hrs)
1%MAX
Water Resistance
Excellent
Thermal Conductivity
0.3
Specific Gravity
2.5
a metal oxide filled dielectric thermal transfer agent.
FUKKOL Heat Sink Compound Grease White Color in Electronic
Description
Fukkol heat sink compound is a metal oxide filled dielectric thermal transfer agent. It is commonly used in electrical and electronic industries as a thermal transfer medium for facilitating heat dissipation between power components in electrical/electronic assemblies. And heat sink in the assembly process by filling the voids and gaps between the mated surfaces.
Characteristics
Temperature range
-40 °F(-40°C)to 400 °F(204°C)
Apperaance
White opaque
Bleed (204OC in 24 hrs)
1%MAX
NLGI Classification
1-2
Penetration (worked)
265-295
Evaporation(204OC in 24 hrs)
1%MAX
Water Resistance
Excellent
Thermal Conductivity
0.3
Specific Gravity
2.5
FUKKOL Heat Sink Compound Grease
FUKKOL Heat Sink Compound Grease
a metal oxide filled dielectric thermal transfer agent.
FUKKOL Heat Sink Compound Grease
Description
Fukkol heat sink compound is a metal oxide filled dielectric thermal transfer agent. It is commonly used in electrical and electronic industries as a thermal transfer medium for facilitating heat dissipation between power components in electrical/electronic assemblies. And heat sink in the assembly process by filling the voids and gaps between the mated surfaces.
Characteristics
Temperature range
-40 °F(-40°C)to 400 °F(204°C)
Apperaance
White opaque
Bleed (204OC in 24 hrs)
1%MAX
NLGI Classification
1-2
Penetration (worked)
265-295
Evaporation(204OC in 24 hrs)
1%MAX
Water Resistance
Excellent
Thermal Conductivity
0.3
Specific Gravity
2.5
a metal oxide filled dielectric thermal transfer agent.
FUKKOL Heat Sink Compound Grease
Description
Fukkol heat sink compound is a metal oxide filled dielectric thermal transfer agent. It is commonly used in electrical and electronic industries as a thermal transfer medium for facilitating heat dissipation between power components in electrical/electronic assemblies. And heat sink in the assembly process by filling the voids and gaps between the mated surfaces.
Characteristics
Temperature range
-40 °F(-40°C)to 400 °F(204°C)
Apperaance
White opaque
Bleed (204OC in 24 hrs)
1%MAX
NLGI Classification
1-2
Penetration (worked)
265-295
Evaporation(204OC in 24 hrs)
1%MAX
Water Resistance
Excellent
Thermal Conductivity
0.3
Specific Gravity
2.5
Thursday, September 29, 2011
FUKKOL Heat Sink Compound Lubricnat Grease apply for Computer
FUKKOL Heat Sink Compound Lubricant Grease apply for Computer
a metal oxide filled dielectric thermal transfer agent.
FUKKOL Heat Sink Compound Lubricant Grease apply for Computer
Description
Fukkol heat sink compound is a metal oxide filled dielectric thermal transfer agent. It is commonly used in electrical and electronic industries as a thermal transfer medium for facilitating heat dissipation between power components in electrical/electronic assemblies. And heat sink in the assembly process by filling the voids and gaps between the mated surfaces.
Characteristics
Temperature range
-40 °F(-40°C)to 400 °F(204°C)
Apperaance
White opaque
Bleed (204OC in 24 hrs)
1%MAX
NLGI Classification
1-2
Penetration (worked)
265-295
Evaporation(204OC in 24 hrs)
1%MAX
Water Resistance
Excellent
Thermal Conductivity
0.3
Specific Gravity
2.5
a metal oxide filled dielectric thermal transfer agent.
FUKKOL Heat Sink Compound Lubricant Grease apply for Computer
Description
Fukkol heat sink compound is a metal oxide filled dielectric thermal transfer agent. It is commonly used in electrical and electronic industries as a thermal transfer medium for facilitating heat dissipation between power components in electrical/electronic assemblies. And heat sink in the assembly process by filling the voids and gaps between the mated surfaces.
Characteristics
Temperature range
-40 °F(-40°C)to 400 °F(204°C)
Apperaance
White opaque
Bleed (204OC in 24 hrs)
1%MAX
NLGI Classification
1-2
Penetration (worked)
265-295
Evaporation(204OC in 24 hrs)
1%MAX
Water Resistance
Excellent
Thermal Conductivity
0.3
Specific Gravity
2.5
5 Minutes RC Glue
5 Minutes RC Glue
Suitable for:
Synthetic rubber, Hard plastic,
Ceramics, Wood,
Metal, Leather
5 Minutes RC Glue
RC Hobby 5 Minutes Epoxy Can be used to bond items made of wood, metal, fiberglass, ceramics, porcelain, rubber and most types of plastic and foam.
Prior to applying the resin to bonded surfaces, the surfaces should be thoroughly wiped clean of dirt, dried, and degreased.
Application instructions:
Cut off the tips of the two application nozzles with scissors or a knife.
Holding the syringe vertically with the application nozzles facing upwards; Holding the syringe over a clean, disposable, mixing tray to ensure that the compound does not drip onto unintended surfaces.
Squeeze an equal amount of resin and hardener onto the clean mixing surface.
Mix the compound thoroughly with a hard, clean, disposable item such as a coffee stir or chopstick.
Only mix the amount that will be used.
Apply the mixed compound to both surface that are to be bonded together.
You can adjust the bonded joint by applying adhesive thicker in 5 minutes. The joint will be hard and secure in one hour.
T
his resin becomes completely set after 24 hours following mixing and applying.
Suitable for:
Synthetic rubber, Hard plastic,
Ceramics, Wood,
Metal, Leather
5 Minutes RC Glue
RC Hobby 5 Minutes Epoxy Can be used to bond items made of wood, metal, fiberglass, ceramics, porcelain, rubber and most types of plastic and foam.
Prior to applying the resin to bonded surfaces, the surfaces should be thoroughly wiped clean of dirt, dried, and degreased.
Application instructions:
Cut off the tips of the two application nozzles with scissors or a knife.
Holding the syringe vertically with the application nozzles facing upwards; Holding the syringe over a clean, disposable, mixing tray to ensure that the compound does not drip onto unintended surfaces.
Squeeze an equal amount of resin and hardener onto the clean mixing surface.
Mix the compound thoroughly with a hard, clean, disposable item such as a coffee stir or chopstick.
Only mix the amount that will be used.
Apply the mixed compound to both surface that are to be bonded together.
You can adjust the bonded joint by applying adhesive thicker in 5 minutes. The joint will be hard and secure in one hour.
T
his resin becomes completely set after 24 hours following mixing and applying.
FUKKOL Heat Sink Compound apply for CPU
FUKKOL Heat Sink Compound apply for CPU
a metal oxide filled dielectric thermal transfer agent.
FUKKOL Heat Sink Compound apply for CPU
Description
Fukkol heat sink compound is a metal oxide filled dielectric thermal transfer agent. It is commonly used in electrical and electronic industries as a thermal transfer medium for facilitating heat dissipation between power components in electrical/electronic assemblies. And heat sink in the assembly process by filling the voids and gaps between the mated surfaces.
Characteristics
Temperature range
-40 °F(-40°C)to 400 °F(204°C)
Apperaance
White opaque
Bleed (204OC in 24 hrs)
1%MAX
NLGI Classification
1-2
Penetration (worked)
265-295
Evaporation(204OC in 24 hrs)
1%MAX
Water Resistance
Excellent
Thermal Conductivity
0.3
Specific Gravity
2.5
a metal oxide filled dielectric thermal transfer agent.
FUKKOL Heat Sink Compound apply for CPU
Description
Fukkol heat sink compound is a metal oxide filled dielectric thermal transfer agent. It is commonly used in electrical and electronic industries as a thermal transfer medium for facilitating heat dissipation between power components in electrical/electronic assemblies. And heat sink in the assembly process by filling the voids and gaps between the mated surfaces.
Characteristics
Temperature range
-40 °F(-40°C)to 400 °F(204°C)
Apperaance
White opaque
Bleed (204OC in 24 hrs)
1%MAX
NLGI Classification
1-2
Penetration (worked)
265-295
Evaporation(204OC in 24 hrs)
1%MAX
Water Resistance
Excellent
Thermal Conductivity
0.3
Specific Gravity
2.5
FUKKOL Heat Sink Compound apply for LED 16g
FUKKOL Heat Sink Compound apply for LED 16g
a metal oxide filled dielectric thermal transfer agent.
FUKKOL Heat Sink Compound apply for LED 16g
Description
Fukkol heat sink compound is a metal oxide filled dielectric thermal transfer agent. It is commonly used in electrical and electronic industries as a thermal transfer medium for facilitating heat dissipation between power components in electrical/electronic assemblies. And heat sink in the assembly process by filling the voids and gaps between the mated surfaces.
Characteristics
Temperature range
-40 °F(-40°C)to 400 °F(204°C)
Apperaance
White opaque
Bleed (204OC in 24 hrs)
1%MAX
NLGI Classification
1-2
Penetration (worked)
265-295
Evaporation(204OC in 24 hrs)
1%MAX
Water Resistance
Excellent
Thermal Conductivity
0.3
Specific Gravity
2.5
a metal oxide filled dielectric thermal transfer agent.
FUKKOL Heat Sink Compound apply for LED 16g
Description
Fukkol heat sink compound is a metal oxide filled dielectric thermal transfer agent. It is commonly used in electrical and electronic industries as a thermal transfer medium for facilitating heat dissipation between power components in electrical/electronic assemblies. And heat sink in the assembly process by filling the voids and gaps between the mated surfaces.
Characteristics
Temperature range
-40 °F(-40°C)to 400 °F(204°C)
Apperaance
White opaque
Bleed (204OC in 24 hrs)
1%MAX
NLGI Classification
1-2
Penetration (worked)
265-295
Evaporation(204OC in 24 hrs)
1%MAX
Water Resistance
Excellent
Thermal Conductivity
0.3
Specific Gravity
2.5
FUKKOL Heat Sink Compound
FUKKOL Heat Sink Compound
a metal oxide filled dielectric thermal transfer agent.
FUKKOL Heat Sink Compound
Description
Fukkol heat sink compound is a metal oxide filled dielectric thermal transfer agent. It is commonly used in electrical and electronic industries as a thermal transfer medium for facilitating heat dissipation between power components in electrical/electronic assemblies. And heat sink in the assembly process by filling the voids and gaps between the mated surfaces.
Characteristics
Temperature range
-40 °F(-40°C)to 400 °F(204°C)
Apperaance
White opaque
Bleed (204OC in 24 hrs)
1%MAX
NLGI Classification
1-2
Penetration (worked)
265-295
Evaporation(204OC in 24 hrs)
1%MAX
Water Resistance
Excellent
Thermal Conductivity
0.3
Specific Gravity
2.5
a metal oxide filled dielectric thermal transfer agent.
FUKKOL Heat Sink Compound
Description
Fukkol heat sink compound is a metal oxide filled dielectric thermal transfer agent. It is commonly used in electrical and electronic industries as a thermal transfer medium for facilitating heat dissipation between power components in electrical/electronic assemblies. And heat sink in the assembly process by filling the voids and gaps between the mated surfaces.
Characteristics
Temperature range
-40 °F(-40°C)to 400 °F(204°C)
Apperaance
White opaque
Bleed (204OC in 24 hrs)
1%MAX
NLGI Classification
1-2
Penetration (worked)
265-295
Evaporation(204OC in 24 hrs)
1%MAX
Water Resistance
Excellent
Thermal Conductivity
0.3
Specific Gravity
2.5
FUKKOL Heat sink compound thermal grease
FUKKOL Heat sink compound thermal grease
- widely use for electronic equipment
- stability
FUKKOL HEAT SINK COMPOUND
Description
Fukkol heat sink compound is a metal oxide filled dielectric thermal transfer agent. It is commonly used in electrical and electronic industries as a thermal transfer medium for facilitating heat dissipation between power components in electrical/electronic assemblies. And heat sink in the assembly process by filling the voids and gaps between the mated surfaces.
Characteristics
Temperature range
-40 °F(-40°C)to 400 °F(204°C)
Apperaance
White opaque
Bleed (204OC in 24 hrs)
1%MAX
NLGI Classification
1-2
Penetration (worked)
265-295
Evaporation(204OC in 24 hrs)
1%MAX
Water Resistance
Excellent
Thermal Conductivity
0.3
Specific Gravity
2.5
- widely use for electronic equipment
- stability
FUKKOL HEAT SINK COMPOUND
Description
Fukkol heat sink compound is a metal oxide filled dielectric thermal transfer agent. It is commonly used in electrical and electronic industries as a thermal transfer medium for facilitating heat dissipation between power components in electrical/electronic assemblies. And heat sink in the assembly process by filling the voids and gaps between the mated surfaces.
Characteristics
Temperature range
-40 °F(-40°C)to 400 °F(204°C)
Apperaance
White opaque
Bleed (204OC in 24 hrs)
1%MAX
NLGI Classification
1-2
Penetration (worked)
265-295
Evaporation(204OC in 24 hrs)
1%MAX
Water Resistance
Excellent
Thermal Conductivity
0.3
Specific Gravity
2.5
FUKKOL Heavy Viscosity Machine Lubricant Grease FUJITEX AP 0,1,2
FUKKOL FUJITEX AP 0,1,2
- heavy viscosity oil componet provides good lubricanting film
- rust prevent, against dust and dirty
FUKKOL FUJITEX AP 0,1,2
DESCRIPTION:
FUKKOL FUJITEX AP 2,1,0 is a heavy viscosity oil
Component provides good lubricating film streght,
keeping surfaces separated under Load at slow
speeds. The calcium soap provides inherent rust
protection because of its ability to emulsify small
quantities of water.
Tacky and long fibered consistency keeps grease in
place, minimizing leakage, and producing a seal
against dust and dirt to provide longer intervals between greasing.
Applications
It is specially recommended for the lubrication of
bearings operating at high temperatures and
severe load such as continuous castings , vibrating
sieves , quarries breakers and roller conveyors .
Benefits
It is based on a calcium soap type combined with a
high viscosity index mineral base oil . It 's unique
structure makes it suitable for high temperature
application of temperature range from 0°C~60°C.
Very good mechanical stability and a high dropping
point .
Antioxidation , antiwear&extreme pressure
additives have been added maximise the
performance of the grease.
- heavy viscosity oil componet provides good lubricanting film
- rust prevent, against dust and dirty
FUKKOL FUJITEX AP 0,1,2
DESCRIPTION:
FUKKOL FUJITEX AP 2,1,0 is a heavy viscosity oil
Component provides good lubricating film streght,
keeping surfaces separated under Load at slow
speeds. The calcium soap provides inherent rust
protection because of its ability to emulsify small
quantities of water.
Tacky and long fibered consistency keeps grease in
place, minimizing leakage, and producing a seal
against dust and dirt to provide longer intervals between greasing.
Applications
It is specially recommended for the lubrication of
bearings operating at high temperatures and
severe load such as continuous castings , vibrating
sieves , quarries breakers and roller conveyors .
Benefits
It is based on a calcium soap type combined with a
high viscosity index mineral base oil . It 's unique
structure makes it suitable for high temperature
application of temperature range from 0°C~60°C.
Very good mechanical stability and a high dropping
point .
Antioxidation , antiwear&extreme pressure
additives have been added maximise the
performance of the grease.
FUKKOL High Temperature Grease in Chemical
FUKKOL High Temperature Grease in Chemical
Up to 350 degree
FUKKOL High Temperature Grease in Chemical
Up to 350 degree
Description
Fukkol Fuji H.T. is non-melting, EP lubricant made from a highly refined ISO 100 mineral base oil , an organoclay, (modified bentonite ) thickener , and an effective EP agent for high temperature applications where parts application is available .
Benefits
-Minimizes equipment failure : The special non-melting organoclay thickener prevents grease loss from bearings at high temperature .
-Wide temperature range application : May be used in applications up to 320°C with normal regreasing , and up to 350°C with very frequent regreasing , making it suitable for use in a wide range of high temperature industrial applications .
-Prevents failure in wet conditions: Organoclay thickener gives excellent resistance to water wash out.
Usable temperature range for continuous service is -20°C to 320°C . With frequent relubrication the maximum is 350°C .
Application
-Industrial ball and roller bearings in high temperature applications
-Exhaust fan bearings
-Furnace door bearings
-Kiln car wheel bearings
-Roll neck bearings
-High temperature conveyor bearings
-Rotary kiln bearings.
Typical physical properties
1
2
Dropping point°C
>260
>260
Mineral oil viscosity at,40°C
92.5
92.5
Penetration,worded @25°C
310~340
265~295
Thickener (Modified Bentonite)m%
10
12
Timken ok load ,kg,
20
20
Up to 350 degree
FUKKOL High Temperature Grease in Chemical
Up to 350 degree
Description
Fukkol Fuji H.T. is non-melting, EP lubricant made from a highly refined ISO 100 mineral base oil , an organoclay, (modified bentonite ) thickener , and an effective EP agent for high temperature applications where parts application is available .
Benefits
-Minimizes equipment failure : The special non-melting organoclay thickener prevents grease loss from bearings at high temperature .
-Wide temperature range application : May be used in applications up to 320°C with normal regreasing , and up to 350°C with very frequent regreasing , making it suitable for use in a wide range of high temperature industrial applications .
-Prevents failure in wet conditions: Organoclay thickener gives excellent resistance to water wash out.
Usable temperature range for continuous service is -20°C to 320°C . With frequent relubrication the maximum is 350°C .
Application
-Industrial ball and roller bearings in high temperature applications
-Exhaust fan bearings
-Furnace door bearings
-Kiln car wheel bearings
-Roll neck bearings
-High temperature conveyor bearings
-Rotary kiln bearings.
Typical physical properties
1
2
Dropping point°C
>260
>260
Mineral oil viscosity at,40°C
92.5
92.5
Penetration,worded @25°C
310~340
265~295
Thickener (Modified Bentonite)m%
10
12
Timken ok load ,kg,
20
20
FUKKOL High Temperature Grease in Mechine Parts
FUKKOL High Temperature Grease in Mechine Parts
Up to 350 degree
FUKKOL High Temperature Grease in Mechine Parts
Up to 350 degree
Description
Fukkol Fuji H.T. is non-melting, EP lubricant made from a highly refined ISO 100 mineral base oil , an organoclay, (modified bentonite ) thickener , and an effective EP agent for high temperature applications where parts application is available .
Benefits
-Minimizes equipment failure : The special non-melting organoclay thickener prevents grease loss from bearings at high temperature .
-Wide temperature range application : May be used in applications up to 320°C with normal regreasing , and up to 350°C with very frequent regreasing , making it suitable for use in a wide range of high temperature industrial applications .
-Prevents failure in wet conditions: Organoclay thickener gives excellent resistance to water wash out.
Usable temperature range for continuous service is -20°C to 320°C . With frequent relubrication the maximum is 350°C .
Application
-Industrial ball and roller bearings in high temperature applications
-Exhaust fan bearings
-Furnace door bearings
-Kiln car wheel bearings
-Roll neck bearings
-High temperature conveyor bearings
-Rotary kiln bearings.
Typical physical properties
1
2
Dropping point°C
>260
>260
Mineral oil viscosity at,40°C
92.5
92.5
Penetration,worded @25°C
310~340
265~295
Thickener (Modified Bentonite)m%
10
12
Timken ok load ,kg,
20
20
Up to 350 degree
FUKKOL High Temperature Grease in Mechine Parts
Up to 350 degree
Description
Fukkol Fuji H.T. is non-melting, EP lubricant made from a highly refined ISO 100 mineral base oil , an organoclay, (modified bentonite ) thickener , and an effective EP agent for high temperature applications where parts application is available .
Benefits
-Minimizes equipment failure : The special non-melting organoclay thickener prevents grease loss from bearings at high temperature .
-Wide temperature range application : May be used in applications up to 320°C with normal regreasing , and up to 350°C with very frequent regreasing , making it suitable for use in a wide range of high temperature industrial applications .
-Prevents failure in wet conditions: Organoclay thickener gives excellent resistance to water wash out.
Usable temperature range for continuous service is -20°C to 320°C . With frequent relubrication the maximum is 350°C .
Application
-Industrial ball and roller bearings in high temperature applications
-Exhaust fan bearings
-Furnace door bearings
-Kiln car wheel bearings
-Roll neck bearings
-High temperature conveyor bearings
-Rotary kiln bearings.
Typical physical properties
1
2
Dropping point°C
>260
>260
Mineral oil viscosity at,40°C
92.5
92.5
Penetration,worded @25°C
310~340
265~295
Thickener (Modified Bentonite)m%
10
12
Timken ok load ,kg,
20
20
FUKKOL High Temperature Grease Up to 350 degree
FUKKOL High Temperature Grease Up to 350 degree
Usable temperature range for continuous service is -20 degree to 320
FUKKOL High Temperature Grease Up to 350 degree
Usable temperature range for continuous service is -20 degree to 320 degree
Description
Fukkol Fuji H.T. is non-melting, EP lubricant made from a highly refined ISO 100 mineral base oil , an organoclay, (modified bentonite ) thickener , and an effective EP agent for high temperature applications where parts application is available .
Benefits
-Minimizes equipment failure : The special non-melting organoclay thickener prevents grease loss from bearings at high temperature .
-Wide temperature range application : May be used in applications up to 320°C with normal regreasing , and up to 350°C with very frequent regreasing , making it suitable for use in a wide range of high temperature industrial applications .
-Prevents failure in wet conditions: Organoclay thickener gives excellent resistance to water wash out.
Usable temperature range for continuous service is -20°C to 320°C . With frequent relubrication the maximum is 350°C .
Application
-Industrial ball and roller bearings in high temperature applications
-Exhaust fan bearings
-Furnace door bearings
-Kiln car wheel bearings
-Roll neck bearings
-High temperature conveyor bearings
-Rotary kiln bearings.
Typical physical properties
1
2
Dropping point°C
>260
>260
Mineral oil viscosity at,40°C
92.5
92.5
Penetration,worded @25°C
310~340
265~295
Thickener (Modified Bentonite)m%
10
12
Timken ok load ,kg,
20
20
Usable temperature range for continuous service is -20 degree to 320
FUKKOL High Temperature Grease Up to 350 degree
Usable temperature range for continuous service is -20 degree to 320 degree
Description
Fukkol Fuji H.T. is non-melting, EP lubricant made from a highly refined ISO 100 mineral base oil , an organoclay, (modified bentonite ) thickener , and an effective EP agent for high temperature applications where parts application is available .
Benefits
-Minimizes equipment failure : The special non-melting organoclay thickener prevents grease loss from bearings at high temperature .
-Wide temperature range application : May be used in applications up to 320°C with normal regreasing , and up to 350°C with very frequent regreasing , making it suitable for use in a wide range of high temperature industrial applications .
-Prevents failure in wet conditions: Organoclay thickener gives excellent resistance to water wash out.
Usable temperature range for continuous service is -20°C to 320°C . With frequent relubrication the maximum is 350°C .
Application
-Industrial ball and roller bearings in high temperature applications
-Exhaust fan bearings
-Furnace door bearings
-Kiln car wheel bearings
-Roll neck bearings
-High temperature conveyor bearings
-Rotary kiln bearings.
Typical physical properties
1
2
Dropping point°C
>260
>260
Mineral oil viscosity at,40°C
92.5
92.5
Penetration,worded @25°C
310~340
265~295
Thickener (Modified Bentonite)m%
10
12
Timken ok load ,kg,
20
20
FUKKOL High Temperature Grease Apply for Furnace door bearings
FUKKOL High Temperature Grease Apply for Furnace door bearings
Usable temperature range for service is -20 degree to 320degree
FUKKOL High Temperature Grease Apply for Furnace door bearings
Usable temperature range for continuous service is -20 degree to 320 degree
Description
Fukkol Fuji H.T. is non-melting, EP lubricant made from a highly refined ISO 100 mineral base oil , an organoclay, (modified bentonite ) thickener , and an effective EP agent for high temperature applications where parts application is available .
Benefits
-Minimizes equipment failure : The special non-melting organoclay thickener prevents grease loss from bearings at high temperature .
-Wide temperature range application : May be used in applications up to 320°C with normal regreasing , and up to 350°C with very frequent regreasing , making it suitable for use in a wide range of high temperature industrial applications .
-Prevents failure in wet conditions: Organoclay thickener gives excellent resistance to water wash out.
Usable temperature range for continuous service is -20°C to 320°C . With frequent relubrication the maximum is 350°C .
Application
-Industrial ball and roller bearings in high temperature applications
-Exhaust fan bearings
-Furnace door bearings
-Kiln car wheel bearings
-Roll neck bearings
-High temperature conveyor bearings
-Rotary kiln bearings.
Typical physical properties
1
2
Dropping point°C
>260
>260
Mineral oil viscosity at,40°C
92.5
92.5
Penetration,worded @25°C
310~340
265~295
Thickener (Modified Bentonite)m%
10
12
Timken ok load ,kg,
20
20
Usable temperature range for service is -20 degree to 320degree
FUKKOL High Temperature Grease Apply for Furnace door bearings
Usable temperature range for continuous service is -20 degree to 320 degree
Description
Fukkol Fuji H.T. is non-melting, EP lubricant made from a highly refined ISO 100 mineral base oil , an organoclay, (modified bentonite ) thickener , and an effective EP agent for high temperature applications where parts application is available .
Benefits
-Minimizes equipment failure : The special non-melting organoclay thickener prevents grease loss from bearings at high temperature .
-Wide temperature range application : May be used in applications up to 320°C with normal regreasing , and up to 350°C with very frequent regreasing , making it suitable for use in a wide range of high temperature industrial applications .
-Prevents failure in wet conditions: Organoclay thickener gives excellent resistance to water wash out.
Usable temperature range for continuous service is -20°C to 320°C . With frequent relubrication the maximum is 350°C .
Application
-Industrial ball and roller bearings in high temperature applications
-Exhaust fan bearings
-Furnace door bearings
-Kiln car wheel bearings
-Roll neck bearings
-High temperature conveyor bearings
-Rotary kiln bearings.
Typical physical properties
1
2
Dropping point°C
>260
>260
Mineral oil viscosity at,40°C
92.5
92.5
Penetration,worded @25°C
310~340
265~295
Thickener (Modified Bentonite)m%
10
12
Timken ok load ,kg,
20
20
FUKKOL High Temperature Grease Apply for Roll neck bearings
FUKKOL High Temperature Grease Apply for Roll neck bearings
Usable temperature range for service is -20 degree to 320degre
FUKKOL High Temperature Grease Apply for Roll neck bearings
Usable temperature range for continuous service is -20 degree to 320 degree
Description
Fukkol Fuji H.T. is non-melting, EP lubricant made from a highly refined ISO 100 mineral base oil , an organoclay, (modified bentonite ) thickener , and an effective EP agent for high temperature applications where parts application is available .
Benefits
-Minimizes equipment failure : The special non-melting organoclay thickener prevents grease loss from bearings at high temperature .
-Wide temperature range application : May be used in applications up to 320°C with normal regreasing , and up to 350°C with very frequent regreasing , making it suitable for use in a wide range of high temperature industrial applications .
-Prevents failure in wet conditions: Organoclay thickener gives excellent resistance to water wash out.
Usable temperature range for continuous service is -20°C to 320°C . With frequent relubrication the maximum is 350°C .
Application
-Industrial ball and roller bearings in high temperature applications
-Exhaust fan bearings
-Furnace door bearings
-Kiln car wheel bearings
-Roll neck bearings
-High temperature conveyor bearings
-Rotary kiln bearings.
Typical physical properties
1
2
Dropping point°C
>260
>260
Mineral oil viscosity at,40°C
92.5
92.5
Penetration,worded @25°C
310~340
265~295
Thickener (Modified Bentonite)m%
10
12
Timken ok load ,kg,
20
20
Usable temperature range for service is -20 degree to 320degre
FUKKOL High Temperature Grease Apply for Roll neck bearings
Usable temperature range for continuous service is -20 degree to 320 degree
Description
Fukkol Fuji H.T. is non-melting, EP lubricant made from a highly refined ISO 100 mineral base oil , an organoclay, (modified bentonite ) thickener , and an effective EP agent for high temperature applications where parts application is available .
Benefits
-Minimizes equipment failure : The special non-melting organoclay thickener prevents grease loss from bearings at high temperature .
-Wide temperature range application : May be used in applications up to 320°C with normal regreasing , and up to 350°C with very frequent regreasing , making it suitable for use in a wide range of high temperature industrial applications .
-Prevents failure in wet conditions: Organoclay thickener gives excellent resistance to water wash out.
Usable temperature range for continuous service is -20°C to 320°C . With frequent relubrication the maximum is 350°C .
Application
-Industrial ball and roller bearings in high temperature applications
-Exhaust fan bearings
-Furnace door bearings
-Kiln car wheel bearings
-Roll neck bearings
-High temperature conveyor bearings
-Rotary kiln bearings.
Typical physical properties
1
2
Dropping point°C
>260
>260
Mineral oil viscosity at,40°C
92.5
92.5
Penetration,worded @25°C
310~340
265~295
Thickener (Modified Bentonite)m%
10
12
Timken ok load ,kg,
20
20
"Kunlun" Fully refined paraffin wax 58/60
"Kunlun" Fully refined paraffin wax 58/60
Made by Petrochina Fushun petrochemical company
"Kunlun" Fully refined paraffin wax 58-60
Melting Point: 58-60'C ASTM D87
Oil Content Wt%: 0.5 Max ASTM D721
Color (saybolt): +28 Min ASTM D156
Light stability: 4 Max
Needle penetration(25 )1/10mm: 18 Max ASTM D1321
Odor: 2Max ASTM D1833
Mechanical Impurity and Water: Negative
Acid and Alkali with Water solubility: Negative
FDA: Passed
Made by Petrochina Fushun petrochemical company
"Kunlun" Fully refined paraffin wax 58-60
Melting Point: 58-60'C ASTM D87
Oil Content Wt%: 0.5 Max ASTM D721
Color (saybolt): +28 Min ASTM D156
Light stability: 4 Max
Needle penetration(25 )1/10mm: 18 Max ASTM D1321
Odor: 2Max ASTM D1833
Mechanical Impurity and Water: Negative
Acid and Alkali with Water solubility: Negative
FDA: Passed
5 Minutes Epoxy / RC Adhesive
5 Minutes Epoxy / RC Adhesive
Suitable for:
Synthetic rubber, Hard plastic,
Ceramics, Wood,
Metal, Leather
5 Minutes Epoxy / RC Adhesive
RC Hobby 5 Minutes Epoxy Can be used to bond items made of wood, metal, fiberglass, ceramics, porcelain, rubber and most types of plastic and foam.
Prior to applying the resin to bonded surfaces, the surfaces should be thoroughly wiped clean of dirt, dried, and degreased.
Application instructions:
Cut off the tips of the two application nozzles with scissors or a knife.
Holding the syringe vertically with the application nozzles facing upwards; Holding the syringe over a clean, disposable, mixing tray to ensure that the compound does not drip onto unintended surfaces.
Squeeze an equal amount of resin and hardener onto the clean mixing surface.
Mix the compound thoroughly with a hard, clean, disposable item such as a coffee stir or chopstick.
Only mix the amount that will be used.
Apply the mixed compound to both surface that are to be bonded together.
You can adjust the bonded joint by applying adhesive thicker in 5 minutes. The joint will be hard and secure in one hour.
T
his resin becomes completely set after 24 hours following mixing and applying.
Suitable for:
Synthetic rubber, Hard plastic,
Ceramics, Wood,
Metal, Leather
5 Minutes Epoxy / RC Adhesive
RC Hobby 5 Minutes Epoxy Can be used to bond items made of wood, metal, fiberglass, ceramics, porcelain, rubber and most types of plastic and foam.
Prior to applying the resin to bonded surfaces, the surfaces should be thoroughly wiped clean of dirt, dried, and degreased.
Application instructions:
Cut off the tips of the two application nozzles with scissors or a knife.
Holding the syringe vertically with the application nozzles facing upwards; Holding the syringe over a clean, disposable, mixing tray to ensure that the compound does not drip onto unintended surfaces.
Squeeze an equal amount of resin and hardener onto the clean mixing surface.
Mix the compound thoroughly with a hard, clean, disposable item such as a coffee stir or chopstick.
Only mix the amount that will be used.
Apply the mixed compound to both surface that are to be bonded together.
You can adjust the bonded joint by applying adhesive thicker in 5 minutes. The joint will be hard and secure in one hour.
T
his resin becomes completely set after 24 hours following mixing and applying.
Subscribe to:
Posts (Atom)