paraffins
1.High-melting-point
2.Low viscosity
3.Good hardness
Fisher-Tropsch wax
Name
Fisher-Tropsch wax
Congealing point°C
99.8°C
Color
2
Kinematic viscosity mm2/s
9.1(130°C)
Penetration(25°C,100g),
1/10mm
6.7
It is characterized by high molecular weight, viscosity, melt point and a more opaque appearance.
There are numerous grades
of microcrystalline wax and variations are due to differences of feed stock and method of refinement.
Saturday, October 15, 2011
Extra Dry Special Powder Mould Release Agent
*Colourless, non-toxic, non-staining, excellent in food, paper and textile industries
*Good for ejector pins
Product Information
Fukkol Transparent Plastic Mould Release Agent is specially designed to provide of most injection,extrusion and blow Moulding Plastic Mould Releasing.
Fukkol Transparent Plastic Mould Release Agent have a extra dry special powder, It can subsitute for tradition staining problem.Therefore, it will not tranfer to products and can be safer used without fear blemish or and adverse effect on subsequent finishing operations,i.e. Painting,Plating and spraying. If does not contain siliconesor chlorinated slovent.
Product Application
Eexcellent for use in:
*ABS,PC,acetal,acrylic,PE,PP,Nylon,Pom,PS,epoxy,and all rubber.
*Computer component,Optical Lens,Transparent Plastic Case, Plastic board, or rubberproducts.
Virtue
*Colourless, non-toxic and non-staining, excellent for use in food, paper and textile industries
*Heat stable, non-transferring, non-conductive
*Good lubrication for ejector pins with high moulding temperature
*Heat stable at operating temperature up to 350°C
*Good for ejector pins
Product Information
Fukkol Transparent Plastic Mould Release Agent is specially designed to provide of most injection,extrusion and blow Moulding Plastic Mould Releasing.
Fukkol Transparent Plastic Mould Release Agent have a extra dry special powder, It can subsitute for tradition staining problem.Therefore, it will not tranfer to products and can be safer used without fear blemish or and adverse effect on subsequent finishing operations,i.e. Painting,Plating and spraying. If does not contain siliconesor chlorinated slovent.
Product Application
Eexcellent for use in:
*ABS,PC,acetal,acrylic,PE,PP,Nylon,Pom,PS,epoxy,and all rubber.
*Computer component,Optical Lens,Transparent Plastic Case, Plastic board, or rubberproducts.
Virtue
*Colourless, non-toxic and non-staining, excellent for use in food, paper and textile industries
*Heat stable, non-transferring, non-conductive
*Good lubrication for ejector pins with high moulding temperature
*Heat stable at operating temperature up to 350°C
Extra Dry Special Powder Silicone Spray
*Colourless, non-toxic, non-staining, excellent in food, paper and textile industries
*Good for ejector pins
Product Information
Fukkol Transparent Plastic Mould Release Agent is specially designed to provide of most injection,extrusion and blow Moulding Plastic Mould Releasing.
Fukkol Transparent Plastic Mould Release Agent have a extra dry special powder, It can subsitute for tradition staining problem.Therefore, it will not tranfer to products and can be safer used without fear blemish or and adverse effect on subsequent finishing operations,i.e. Painting,Plating and spraying. If does not contain siliconesor chlorinated slovent.
Product Application
Eexcellent for use in:
*ABS,PC,acetal,acrylic,PE,PP,Nylon,Pom,PS,epoxy,and all rubber.
*Computer component,Optical Lens,Transparent Plastic Case, Plastic board, or rubberproducts.
Virtue
*Colourless, non-toxic and non-staining, excellent for use in food, paper and textile industries
*Heat stable, non-transferring, non-conductive
*Good lubrication for ejector pins with high moulding temperature
*Heat stable at operating temperature up to 350°C
*Good for ejector pins
Product Information
Fukkol Transparent Plastic Mould Release Agent is specially designed to provide of most injection,extrusion and blow Moulding Plastic Mould Releasing.
Fukkol Transparent Plastic Mould Release Agent have a extra dry special powder, It can subsitute for tradition staining problem.Therefore, it will not tranfer to products and can be safer used without fear blemish or and adverse effect on subsequent finishing operations,i.e. Painting,Plating and spraying. If does not contain siliconesor chlorinated slovent.
Product Application
Eexcellent for use in:
*ABS,PC,acetal,acrylic,PE,PP,Nylon,Pom,PS,epoxy,and all rubber.
*Computer component,Optical Lens,Transparent Plastic Case, Plastic board, or rubberproducts.
Virtue
*Colourless, non-toxic and non-staining, excellent for use in food, paper and textile industries
*Heat stable, non-transferring, non-conductive
*Good lubrication for ejector pins with high moulding temperature
*Heat stable at operating temperature up to 350°C
262 Thread locking adhesive
262 is formulated to lock all metric and imperial nuts and bolts, preventing vibration loosening and leakage
Product Information
FUKKOL 262 is formulated to lock all metric and imperial nuts and bolts, preventing vibration loosening and leakage through the threads. The thixotropic nature of the product prevents run off, dripping and migration after assembly. Once applied, parts slip together easily, lubricated by the adhesive. FUKKOL 262 prevents corrosion of assembled parts.
Product Application
Ensure parts are clean, dry and free from oil and grease.
Apply adhesive to all engaged threads.
Assemble parts and allow to cure.
Wipe excess adhesive from outside of joint .
Product is normally hand applied from the bottle.
Dispensing systems are available for high volume assembly applications.
Product Information
FUKKOL 262 is formulated to lock all metric and imperial nuts and bolts, preventing vibration loosening and leakage through the threads. The thixotropic nature of the product prevents run off, dripping and migration after assembly. Once applied, parts slip together easily, lubricated by the adhesive. FUKKOL 262 prevents corrosion of assembled parts.
Product Application
Ensure parts are clean, dry and free from oil and grease.
Apply adhesive to all engaged threads.
Assemble parts and allow to cure.
Wipe excess adhesive from outside of joint .
Product is normally hand applied from the bottle.
Dispensing systems are available for high volume assembly applications.
Extrem Pressure Ejector Pin Lubricant
*Very good resistance to oxidation.
*Very good anti-rust protection.
*Vety good anti-wear protection.
Product Information
*Machine tools slide ways under all conditions of speed and load .
*Particularly suitable for centralized lubrication systems.
*One wide range of lubricating products for all parts of machine tools (hydraulic, slides, gears).
*Desihned for use in steel/steel&cast iron slideways.
*Also be used in hydraulic system of machine tools having same slideways & hydraulic lubrication system.
*For use plastic PIN.
Virtue
*High quality oils of good oxidation stability in-orporating oiliness , antiwear & tackiness addit-ives which impart the frictional characteristics necessary to prevent′stick-slip′in the opera-tions of tableways & slideways of machine tools.
*Protects exposed machine tools parts from c-orrosion.
*Perfect neutrality with respect to oil seals.
*Excellent demulsibility.
*Very good resistance to oxidation.
*Very good anti-rust protection.
*Vety good anti-wear protection.
*Very good anti-rust protection.
*Vety good anti-wear protection.
Product Information
*Machine tools slide ways under all conditions of speed and load .
*Particularly suitable for centralized lubrication systems.
*One wide range of lubricating products for all parts of machine tools (hydraulic, slides, gears).
*Desihned for use in steel/steel&cast iron slideways.
*Also be used in hydraulic system of machine tools having same slideways & hydraulic lubrication system.
*For use plastic PIN.
Virtue
*High quality oils of good oxidation stability in-orporating oiliness , antiwear & tackiness addit-ives which impart the frictional characteristics necessary to prevent′stick-slip′in the opera-tions of tableways & slideways of machine tools.
*Protects exposed machine tools parts from c-orrosion.
*Perfect neutrality with respect to oil seals.
*Excellent demulsibility.
*Very good resistance to oxidation.
*Very good anti-rust protection.
*Vety good anti-wear protection.
Extrem pressure resistance agent
Extrem pressure resistance agent
1 Power saving 5%-30%
2 Antiwear & friction
3 Improving efficiency
4.Extend service life
The instruction of Dunba Power Saving & Maintaining additives
for heavy equipment
1.Discription
Dunba Power Saving & Maintaining addtives for oil for heavy equipment is a power saving and environmental friendly products as compound of Nano Metal Particle,polymer,and multifunctional additives,which is made of the newest technological fruit prduced by"national 863 plan".We have the intellectual property rights(Patent No. ZL200810032849.1).It has not only function of
super lubricating,selfrepairing but also of good antioxidation,and good antifriction.
2.Characteristic
1)
Save power 5%-30%,lubricant 50%;
2)Improving the resisting pressure and load capacity of lubricating oil, reducing impact load, and assure the minimum friction;
3)repair attrition dynamically,maitain equipment,reduce repair cost of the equipment effectively;
4)antiwear,reduce friction,reduce shake,cooling,reduce noise,improve efficiency,prolong the service lfe of equipment;
5)Mixed in virous lubricants,not changing the performance of lubricating oil,extend the period of changing oil;
6)Clean oil dirt,prevent malfunction,reduce mechanical accident;
7)The usage is simple and convenient,no damage for the construction of equipment.
3,Technical Characteristic
1)This product is produced by organic and inorganic nano materials, not only possessing the function of strong lubricating & resisting extreme pressure of organic material, but also having intelligent self-repair performance of inorganic nano material. In the process of friction, the nano particle is induced by the friction heat, rapidly penetrating into the micro defect on the surface of metal friction, quickly repairing uneven friction surface, and forming extra smooth,high hardness friction surface, not only reducing the friction coefficient, but also improving the performance of extreme pressure and anti-wear, thereby achieving the effect of power saving ,noise reduction and extending service life.
2)Stable performance,anti-oxidation,excellent dispersivity, mixed with any lubricating oil, no damage for the human body, environmental product.
3)Maintaining the equipment under extreme pressure, make the minimum friction.
Metal Friction surface comparison after and before using Dunba
(after) (before)
4.Application
This product is stable in various lubricants,is suitable for power-saving and maintainance of midium and small equipment in the fields of spinning,papermaking,chemical industry.
5,Usage Instruction
Add mixed product to lubrication system, normal usage is about 1% of the total lubricating oil. If you have any problem, please consult the manufacturer.
6,Notice
1)Keep in normal temperature and avoid sunlight
2)Protect from impurity and water
3)Don’t drink and avoid skin contact for long time
1 Power saving 5%-30%
2 Antiwear & friction
3 Improving efficiency
4.Extend service life
The instruction of Dunba Power Saving & Maintaining additives
for heavy equipment
1.Discription
Dunba Power Saving & Maintaining addtives for oil for heavy equipment is a power saving and environmental friendly products as compound of Nano Metal Particle,polymer,and multifunctional additives,which is made of the newest technological fruit prduced by"national 863 plan".We have the intellectual property rights(Patent No. ZL200810032849.1).It has not only function of
super lubricating,selfrepairing but also of good antioxidation,and good antifriction.
2.Characteristic
1)
Save power 5%-30%,lubricant 50%;
2)Improving the resisting pressure and load capacity of lubricating oil, reducing impact load, and assure the minimum friction;
3)repair attrition dynamically,maitain equipment,reduce repair cost of the equipment effectively;
4)antiwear,reduce friction,reduce shake,cooling,reduce noise,improve efficiency,prolong the service lfe of equipment;
5)Mixed in virous lubricants,not changing the performance of lubricating oil,extend the period of changing oil;
6)Clean oil dirt,prevent malfunction,reduce mechanical accident;
7)The usage is simple and convenient,no damage for the construction of equipment.
3,Technical Characteristic
1)This product is produced by organic and inorganic nano materials, not only possessing the function of strong lubricating & resisting extreme pressure of organic material, but also having intelligent self-repair performance of inorganic nano material. In the process of friction, the nano particle is induced by the friction heat, rapidly penetrating into the micro defect on the surface of metal friction, quickly repairing uneven friction surface, and forming extra smooth,high hardness friction surface, not only reducing the friction coefficient, but also improving the performance of extreme pressure and anti-wear, thereby achieving the effect of power saving ,noise reduction and extending service life.
2)Stable performance,anti-oxidation,excellent dispersivity, mixed with any lubricating oil, no damage for the human body, environmental product.
3)Maintaining the equipment under extreme pressure, make the minimum friction.
Metal Friction surface comparison after and before using Dunba
(after) (before)
4.Application
This product is stable in various lubricants,is suitable for power-saving and maintainance of midium and small equipment in the fields of spinning,papermaking,chemical industry.
5,Usage Instruction
Add mixed product to lubrication system, normal usage is about 1% of the total lubricating oil. If you have any problem, please consult the manufacturer.
6,Notice
1)Keep in normal temperature and avoid sunlight
2)Protect from impurity and water
3)Don’t drink and avoid skin contact for long time
Extreme Duty Silicone Lubricant
Silicone Spray
Lubricant Spray
Premium grade
Excellent Viscosity
ISO9001:2000
Silicone Spray
Lubricant Spray
Extreme Duty Silicone Lubricant is a premium grade, high quality silicone lubricant that exhibits excellent temperature viscosity and lubrication characteristics.
400ML or 500 ml
12 can per carton
Lubricant Spray
Premium grade
Excellent Viscosity
ISO9001:2000
Silicone Spray
Lubricant Spray
Extreme Duty Silicone Lubricant is a premium grade, high quality silicone lubricant that exhibits excellent temperature viscosity and lubrication characteristics.
400ML or 500 ml
12 can per carton
Extreme High Temperature Grease FUKKOL H.T Paste
1.we warranty No carbonization,no melting,no flow out
2.stable in 1400 degree extreme high temperature
3.unique Nano tech
FUKKOL H.T. PASTE
Description:
A white non-carbonized-under-high-temperature lubricating paste for lubrication of all kinds of surfaces subject to high load,
particularly operation at low speed and/or oscillating motion and of steel and non-ferrous metal
screw ,plug and bayonet joints.
Applications:
-Anti-Seizing non-destructive disassembly of threaded conncetions subject to high temperatures,
i.e. at internal combustion engines and turbines oven after long service time.
-Corrosion protection for nuts and bolts,sockcts and spindles in refurenes, steel-and cement mills,
marine and agriculture.
Benefits:
-Best use-ONE single paste for MANY applications;
-White-coloured, non-staining, outstanding lubricity
-High pressure, low friction and low wear resistance, reliable anti-serze effect and corrosion protection.
-Economical and ecological solution for many plants and shops which have been depending
on a number of special pastes so far.
-contains organic active molybdenum additive for increased performance.
Environment:
Ecology - FUKKOL H.T PASTE is non-toxic,contains no ferrous metals and is free from graphite ,
molybdenum-disulphide and sulphide additives.
Typical physical properties
Appearance
White color
Basc
Synthetic oil compound with organic thickener and
combination of white solid lubricants
Unworked penetration
280-320
Specific gravity
1.2g/cc at 20°C
Dropping point
None
Base oil viscosity
21mm2/s at 40°C
Temperature range
-40°C~+1400°C
Friction value
0.10-0.13
Degree of corrosion
1-90
Depth of wear
0.3um
Salt spray test
>500 hours
Four-ball tester(VKA)
3800/4000N
2.stable in 1400 degree extreme high temperature
3.unique Nano tech
FUKKOL H.T. PASTE
Description:
A white non-carbonized-under-high-temperature lubricating paste for lubrication of all kinds of surfaces subject to high load,
particularly operation at low speed and/or oscillating motion and of steel and non-ferrous metal
screw ,plug and bayonet joints.
Applications:
-Anti-Seizing non-destructive disassembly of threaded conncetions subject to high temperatures,
i.e. at internal combustion engines and turbines oven after long service time.
-Corrosion protection for nuts and bolts,sockcts and spindles in refurenes, steel-and cement mills,
marine and agriculture.
Benefits:
-Best use-ONE single paste for MANY applications;
-White-coloured, non-staining, outstanding lubricity
-High pressure, low friction and low wear resistance, reliable anti-serze effect and corrosion protection.
-Economical and ecological solution for many plants and shops which have been depending
on a number of special pastes so far.
-contains organic active molybdenum additive for increased performance.
Environment:
Ecology - FUKKOL H.T PASTE is non-toxic,contains no ferrous metals and is free from graphite ,
molybdenum-disulphide and sulphide additives.
Typical physical properties
Appearance
White color
Basc
Synthetic oil compound with organic thickener and
combination of white solid lubricants
Unworked penetration
280-320
Specific gravity
1.2g/cc at 20°C
Dropping point
None
Base oil viscosity
21mm2/s at 40°C
Temperature range
-40°C~+1400°C
Friction value
0.10-0.13
Degree of corrosion
1-90
Depth of wear
0.3um
Salt spray test
>500 hours
Four-ball tester(VKA)
3800/4000N
Extreme Pressure Calcium Complex NLGI NO.2 Grease
extreme pressure calcium complex, NLGI NO.2 grease. which has a smooth structure and extremely adhesive .
Product Information
Fukkol Blue Presser Grease is an extreme pressure calcium complex, NLGI NO.2 grease. It has a smooth structure and is extremely adhesive in service, resisting water wash out and spray off. It provides excellent rust protection as well as protection against wear, making it an excellent choice for on-and-off-highway heavy duty equipment(fifth wheels, kingpins, U-joints, bucket pins etc.)
Product Appilication
Fukkol Blue Presser Grease that have been developed to meet the growing demand for multiservice performance including protection from wear under heavy and shock loads and resistance to heat and water washing.All these greases are recommended for the lubrication of chassis,wheel bearings,clutch bearings, wheel joints of steering and suspension systems,and universal joint of all typesof passenger cars, trucks, vans, buses, contractor, construction,earth moving and mobile equipment.
Product Information
Fukkol Blue Presser Grease is an extreme pressure calcium complex, NLGI NO.2 grease. It has a smooth structure and is extremely adhesive in service, resisting water wash out and spray off. It provides excellent rust protection as well as protection against wear, making it an excellent choice for on-and-off-highway heavy duty equipment(fifth wheels, kingpins, U-joints, bucket pins etc.)
Product Appilication
Fukkol Blue Presser Grease that have been developed to meet the growing demand for multiservice performance including protection from wear under heavy and shock loads and resistance to heat and water washing.All these greases are recommended for the lubrication of chassis,wheel bearings,clutch bearings, wheel joints of steering and suspension systems,and universal joint of all typesof passenger cars, trucks, vans, buses, contractor, construction,earth moving and mobile equipment.
Extreme Pressure Lithium Based Grease
1.Excellent properties of high temperatu
2.Extreme pressure
3.Water proof
4.Pump transfer
5.Antiocidant and colloid stabili
This product is a lithium soap thickener refined base oil, and add anti-oxidants, rust inhibitors, extreme pressure anti-wear additive agent is made.
Basic Information:
Base Oil
Refined
Thickener
Synthetic Lithium
Additives
Wear resistant, Extreme Pressure, Antioxidant, and Antirust.
Typical Values:
Item
Typical Values
1#
2#
3#
Appearance
Exquisite smooth ointment color covering from pale yellow to brown
Worked cone penetration, 0.1mm
310-340
265-295
220-250
Dropping Point,ºC ≥
170
175
180
Sprinkling loss(38oC,1h)% ≤
8
Corrosion(T2 sheet copper, 100°C, 24h)
PASS
Timken test. OK,N ≥
156
4-ball test .PB,N ≥
588
Features:
→Excellent properties of high temperature, extreme pressure, water proof, pump transfer, antioxidant, and colloid stability.
Applications:
→Applicable to industrial machinery lubrication in metallurgy, papermaking, chemical industry etc . Widely used for lubrication of high temperature parts, especially for centralized centralized grease supplying system.
Temperature Range:
-20°C~130°C
Package:
500g, 1000g, 15kg, 180kg in plastic/metal containers, adjustable according to customer’s requirement.
Regulation:
→To be keep at a dry and cool indoor place protected form sunlight and bad weather.
→Do not mix it with other oil or grease product.No foreign matters are allowed in this product.
2.Extreme pressure
3.Water proof
4.Pump transfer
5.Antiocidant and colloid stabili
This product is a lithium soap thickener refined base oil, and add anti-oxidants, rust inhibitors, extreme pressure anti-wear additive agent is made.
Basic Information:
Base Oil
Refined
Thickener
Synthetic Lithium
Additives
Wear resistant, Extreme Pressure, Antioxidant, and Antirust.
Typical Values:
Item
Typical Values
1#
2#
3#
Appearance
Exquisite smooth ointment color covering from pale yellow to brown
Worked cone penetration, 0.1mm
310-340
265-295
220-250
Dropping Point,ºC ≥
170
175
180
Sprinkling loss(38oC,1h)% ≤
8
Corrosion(T2 sheet copper, 100°C, 24h)
PASS
Timken test. OK,N ≥
156
4-ball test .PB,N ≥
588
Features:
→Excellent properties of high temperature, extreme pressure, water proof, pump transfer, antioxidant, and colloid stability.
Applications:
→Applicable to industrial machinery lubrication in metallurgy, papermaking, chemical industry etc . Widely used for lubrication of high temperature parts, especially for centralized centralized grease supplying system.
Temperature Range:
-20°C~130°C
Package:
500g, 1000g, 15kg, 180kg in plastic/metal containers, adjustable according to customer’s requirement.
Regulation:
→To be keep at a dry and cool indoor place protected form sunlight and bad weather.
→Do not mix it with other oil or grease product.No foreign matters are allowed in this product.
Extreme pressure additive T307 lubricant , additives
T307 Ammonium thio-phosphonate
Extreme pressure additive
lubricant
additives
supply qty:900 ton
Extreme pressure additive
lubricant
additives
AMMONIUM THIOPHSPHONATE
T307
BRIEF INTRODUCTION
This product is primarily used in blending gear oils for medium/heavy load vehicle and industry use. It is orange oily liquid with smell. The recommended dosage in oil is 0.4-2.0%.
CHARACTERISTICS
Fine anti-wear ability under extreme pressure
Good chemical stability
Contain more phosphorus than T305
PRODUCT FEATURES AND TEST METHODS
ITEM
INDICE
TEST METHOD
Flash Point (open cup), °C
≥116
GB/T267
Phosphorus, m%
≥8.6
SH/T0296
Sulfur, m%
≥10.2
SH/T0303
Nitrogen, m%
≥1.5
SH/T0224
Water, m%
≤0.13
GB/T260
Impurities, m%
≤0.04
GB/T511
Cu-strip Corrosion (100°C, 3h), rating
≤2b
GB/T5096
PACKING AND STORAGE
Packing: The product is packed in 200 liter metal drum (net weight: 200 kg/drum).
Storage: Please refer to SH/T0164, for transportation, storage and oil blending. Keep the temperature not higher than 60°C. For long-term storage the suggested temperature is lower than 50°C. The dry, clean and ventilating warehouse is recommended.
Extreme pressure additive
lubricant
additives
supply qty:900 ton
Extreme pressure additive
lubricant
additives
AMMONIUM THIOPHSPHONATE
T307
BRIEF INTRODUCTION
This product is primarily used in blending gear oils for medium/heavy load vehicle and industry use. It is orange oily liquid with smell. The recommended dosage in oil is 0.4-2.0%.
CHARACTERISTICS
Fine anti-wear ability under extreme pressure
Good chemical stability
Contain more phosphorus than T305
PRODUCT FEATURES AND TEST METHODS
ITEM
INDICE
TEST METHOD
Flash Point (open cup), °C
≥116
GB/T267
Phosphorus, m%
≥8.6
SH/T0296
Sulfur, m%
≥10.2
SH/T0303
Nitrogen, m%
≥1.5
SH/T0224
Water, m%
≤0.13
GB/T260
Impurities, m%
≤0.04
GB/T511
Cu-strip Corrosion (100°C, 3h), rating
≤2b
GB/T5096
PACKING AND STORAGE
Packing: The product is packed in 200 liter metal drum (net weight: 200 kg/drum).
Storage: Please refer to SH/T0164, for transportation, storage and oil blending. Keep the temperature not higher than 60°C. For long-term storage the suggested temperature is lower than 50°C. The dry, clean and ventilating warehouse is recommended.
Extrusive PVDF rod
So far, our company has successfully developed Dia3-Dia300mm of PVDF extrusive rod ,widely used in various fields .
tem
thinckness
width
length
Application
Stamped sheet
1-50mm
100-1000mm
100-2000mm
insulating parts,anticorrosivelining
seal
Extrusion sheet
0.05-0.5
≤500
≥10000
PVDF sheet ,Board conforms to the respective standards
Item
Dia
Length
Application
Stamping rod
5-20
200
In-process antisepsis,steel ,insulating component
25-100
100-150
Extrusion tube
3-150
≥4000
Pipeline for corrosive liquid and gas, protecting tube for Electric wire
PVDF rod and tube conforms to the respective standards .
tem
thinckness
width
length
Application
Stamped sheet
1-50mm
100-1000mm
100-2000mm
insulating parts,anticorrosivelining
seal
Extrusion sheet
0.05-0.5
≤500
≥10000
PVDF sheet ,Board conforms to the respective standards
Item
Dia
Length
Application
Stamping rod
5-20
200
In-process antisepsis,steel ,insulating component
25-100
100-150
Extrusion tube
3-150
≥4000
Pipeline for corrosive liquid and gas, protecting tube for Electric wire
PVDF rod and tube conforms to the respective standards .
Extrusive PVDF rod
So far, our company has successfully developed 1 m * 2 meters of PVDF board,widely used in various fields .
tem
thinckness
width
length
Application
Stamped sheet
1-50mm
100-1000mm
100-2000mm
insulating parts,anticorrosivelining
seal
Extrusion sheet
0.05-0.5
≤500
≥10000
PVDF sheet ,Board conforms to the respective standards
Item
Dia
Length
Application
Stamping rod
5-20
200
In-process antisepsis,steel ,insulating component
25-100
100-150
Extrusion tube
3-150
≥4000
Pipeline for corrosive liquid and gas, protecting tube for Electric wire
PVDF rod and tube conforms to the respective standards .
tem
thinckness
width
length
Application
Stamped sheet
1-50mm
100-1000mm
100-2000mm
insulating parts,anticorrosivelining
seal
Extrusion sheet
0.05-0.5
≤500
≥10000
PVDF sheet ,Board conforms to the respective standards
Item
Dia
Length
Application
Stamping rod
5-20
200
In-process antisepsis,steel ,insulating component
25-100
100-150
Extrusion tube
3-150
≥4000
Pipeline for corrosive liquid and gas, protecting tube for Electric wire
PVDF rod and tube conforms to the respective standards .
Extrusive PVDF tube
So far, our company has successfully developed 1 m * 2 meters of PVDF board,widely used in various fields .
tem
thinckness
width
length
Application
Stamped sheet
1-50mm
100-1000mm
100-2000mm
insulating parts,anticorrosivelining
seal
Extrusion sheet
0.05-0.5
≤500
≥10000
PVDF sheet ,Board conforms to the respective standards
Item
Dia
Length
Application
Stamping rod
5-20
200
In-process antisepsis,steel ,insulating component
25-100
100-150
Extrusion tube
3-150
≥4000
Pipeline for corrosive liquid and gas, protecting tube for Electric wire
PVDF rod and tube conforms to the respective standards .
tem
thinckness
width
length
Application
Stamped sheet
1-50mm
100-1000mm
100-2000mm
insulating parts,anticorrosivelining
seal
Extrusion sheet
0.05-0.5
≤500
≥10000
PVDF sheet ,Board conforms to the respective standards
Item
Dia
Length
Application
Stamping rod
5-20
200
In-process antisepsis,steel ,insulating component
25-100
100-150
Extrusion tube
3-150
≥4000
Pipeline for corrosive liquid and gas, protecting tube for Electric wire
PVDF rod and tube conforms to the respective standards .
"KUN LUN" fully-refined paraffin wax58-60
Place of Origin: Fushun,China
Produced by Petrochina Fushun Company
Oil Content : less than 0.5%
ISO9001:2000 Certified
Our company locates in Fushun City, Liaoning Province, China . Here is a heavy industry place. The company has 6 world advanced wax-produced lines, material wax use the Kunlun liquid wax producing in No.1 Refinery of Fushun Petrochemical Company Refinery , transported through pipe, with steady qualification. The company has the advantage of product sources, achieving the strategy cooperatation companion relationship with CNPC. It can supply Kunlun brand paraffin wax, meeting the various needs of customers.
Item (Kunlun Brand,Fushun Origin)
58-60# Fully-Refined
Paraffin Wax
Testing Method
Melting Point
58-60
GB/T2539
Oil Content %(m/m)
≤ 0.5
GB/T3554
Colour
≥ +28
GB/T3555
Light Stability
≤ 4
SH/T0404
Needle Penetration (25)1/10mm
≤ 19
GB/T4985
Kinematic Viscosity (100),mm
2
/s
3.782
GB/T265
Odor
≤ 1
SH/T0414
Water-soluble Acids and Alkalis
No
SH/T0407
Mechanical Impurities and Water
No
BY EYES
Produced by Petrochina Fushun Company
Oil Content : less than 0.5%
ISO9001:2000 Certified
Our company locates in Fushun City, Liaoning Province, China . Here is a heavy industry place. The company has 6 world advanced wax-produced lines, material wax use the Kunlun liquid wax producing in No.1 Refinery of Fushun Petrochemical Company Refinery , transported through pipe, with steady qualification. The company has the advantage of product sources, achieving the strategy cooperatation companion relationship with CNPC. It can supply Kunlun brand paraffin wax, meeting the various needs of customers.
Item (Kunlun Brand,Fushun Origin)
58-60# Fully-Refined
Paraffin Wax
Testing Method
Melting Point
58-60
GB/T2539
Oil Content %(m/m)
≤ 0.5
GB/T3554
Colour
≥ +28
GB/T3555
Light Stability
≤ 4
SH/T0404
Needle Penetration (25)1/10mm
≤ 19
GB/T4985
Kinematic Viscosity (100),mm
2
/s
3.782
GB/T265
Odor
≤ 1
SH/T0414
Water-soluble Acids and Alkalis
No
SH/T0407
Mechanical Impurities and Water
No
BY EYES
271 Thread locking adhesive
271 is a high strength, single component anaerobic thread locker.
Product Information
FUKKOL 271 is a high strength, single component anaerobic thread locker.
Product Application
FUKKOL 271 is formulated to lock all metric and
imperial nuts and bolts, preventing vibration loosening and leakage through the threads. The thixotropic nature of the product prevents run off, dripping and migration after assembly. Once
applied, parts slip together easily, lubricated by the adhesive. FUKKOL 271 prevents corrosion of
assembled parts.
Product Information
FUKKOL 271 is a high strength, single component anaerobic thread locker.
Product Application
FUKKOL 271 is formulated to lock all metric and
imperial nuts and bolts, preventing vibration loosening and leakage through the threads. The thixotropic nature of the product prevents run off, dripping and migration after assembly. Once
applied, parts slip together easily, lubricated by the adhesive. FUKKOL 271 prevents corrosion of
assembled parts.
F MACHINE OIL ISO 10
MACHINE OIL ISO 10
Energy saving
Reduce machinery maintenance
Avoid formation of gums in moving parts
Description
Machine oil is a series of general purpose oil
incorporates special oil-soluble extreme pressure
additives which is suitable for general lubrication .It
combines controlled frictional characteristics with
high film-strength and excellent load-carrying
properties,thus reducing the power requirement in
machine tools. These oils also increase the use ful life
of machinery by minimizing both wear and corrosion.
Applications
General purpose for machinery lubrication.
Suitable for centralized lubrication system in
machinery.
Benefits
Energy saving.
Reduce machinery maintenance.
Avoid formation of gums in moving parts.
Energy saving
Reduce machinery maintenance
Avoid formation of gums in moving parts
Description
Machine oil is a series of general purpose oil
incorporates special oil-soluble extreme pressure
additives which is suitable for general lubrication .It
combines controlled frictional characteristics with
high film-strength and excellent load-carrying
properties,thus reducing the power requirement in
machine tools. These oils also increase the use ful life
of machinery by minimizing both wear and corrosion.
Applications
General purpose for machinery lubrication.
Suitable for centralized lubrication system in
machinery.
Benefits
Energy saving.
Reduce machinery maintenance.
Avoid formation of gums in moving parts.
F MACHINE OIL ISO 20
MACHINE OIL ISO 20
Energy saving
Reduce machinery maintenance
Avoid formation of gums in moving parts
Description
Machine oil ISO 20 is a series of general purpose oil
incorporates special oil-soluble extreme pressure
additives which is suitable for general lubrication .It
combines controlled frictional characteristics with
high film-strength and excellent load-carrying
properties,thus reducing the power requirement in
machine tools. These oils also increase the use ful life
of machinery by minimizing both wear and corrosion.
Applications
General purpose for machinery lubrication.
Suitable for centralized lubrication system in
machinery.
Benefits
Energy saving.
Reduce machinery maintenance.
Avoid formation of gums in moving parts.
Energy saving
Reduce machinery maintenance
Avoid formation of gums in moving parts
Description
Machine oil ISO 20 is a series of general purpose oil
incorporates special oil-soluble extreme pressure
additives which is suitable for general lubrication .It
combines controlled frictional characteristics with
high film-strength and excellent load-carrying
properties,thus reducing the power requirement in
machine tools. These oils also increase the use ful life
of machinery by minimizing both wear and corrosion.
Applications
General purpose for machinery lubrication.
Suitable for centralized lubrication system in
machinery.
Benefits
Energy saving.
Reduce machinery maintenance.
Avoid formation of gums in moving parts.
F MACHINE OIL ISO 30
MACHINE OIL ISO 30
Energy saving
Reduce machinery maintenance
Avoid formation of gums in moving parts
Description
Machine oil ISO 30 is a series of general purpose oil
incorporates special oil-soluble extreme pressure
additives which is suitable for general lubrication .It
combines controlled frictional characteristics with
high film-strength and excellent load-carrying
properties,thus reducing the power requirement in
machine tools. These oils also increase the use ful life
of machinery by minimizing both wear and corrosion.
Applications
General purpose for machinery lubrication.
Suitable for centralized lubrication system in
machinery.
Benefits
Energy saving.
Reduce machinery maintenance.
Avoid formation of gums in moving parts.
Energy saving
Reduce machinery maintenance
Avoid formation of gums in moving parts
Description
Machine oil ISO 30 is a series of general purpose oil
incorporates special oil-soluble extreme pressure
additives which is suitable for general lubrication .It
combines controlled frictional characteristics with
high film-strength and excellent load-carrying
properties,thus reducing the power requirement in
machine tools. These oils also increase the use ful life
of machinery by minimizing both wear and corrosion.
Applications
General purpose for machinery lubrication.
Suitable for centralized lubrication system in
machinery.
Benefits
Energy saving.
Reduce machinery maintenance.
Avoid formation of gums in moving parts.
F MACHINE OIL ISO 40
MACHINE OIL ISO 40
Energy saving
Reduce machinery maintenance
Avoid formation of gums in moving parts
Description
Machine oil ISO 40 is a series of general purpose oil
incorporates special oil-soluble extreme pressure
additives which is suitable for general lubrication .It
combines controlled frictional characteristics with
high film-strength and excellent load-carrying
properties,thus reducing the power requirement in
machine tools. These oils also increase the use ful life
of machinery by minimizing both wear and corrosion.
Applications
General purpose for machinery lubrication.
Suitable for centralized lubrication system in
machinery.
Benefits
Energy saving.
Reduce machinery maintenance.
Avoid formation of gums in moving parts.
Energy saving
Reduce machinery maintenance
Avoid formation of gums in moving parts
Description
Machine oil ISO 40 is a series of general purpose oil
incorporates special oil-soluble extreme pressure
additives which is suitable for general lubrication .It
combines controlled frictional characteristics with
high film-strength and excellent load-carrying
properties,thus reducing the power requirement in
machine tools. These oils also increase the use ful life
of machinery by minimizing both wear and corrosion.
Applications
General purpose for machinery lubrication.
Suitable for centralized lubrication system in
machinery.
Benefits
Energy saving.
Reduce machinery maintenance.
Avoid formation of gums in moving parts.
F MACHINE OIL ISO 50
MACHINE OIL ISO 50
Energy saving
Reduce machinery maintenance
Avoid formation of gums in moving parts
Description
Machine oil ISO 50 is a series of general purpose oil
incorporates special oil-soluble extreme pressure
additives which is suitable for general lubrication .It
combines controlled frictional characteristics with
high film-strength and excellent load-carrying
properties,thus reducing the power requirement in
machine tools. These oils also increase the use ful life
of machinery by minimizing both wear and corrosion.
Applications
General purpose for machinery lubrication.
Suitable for centralized lubrication system in
machinery.
Benefits
Energy saving.
Reduce machinery maintenance.
Avoid formation of gums in moving parts.
Energy saving
Reduce machinery maintenance
Avoid formation of gums in moving parts
Description
Machine oil ISO 50 is a series of general purpose oil
incorporates special oil-soluble extreme pressure
additives which is suitable for general lubrication .It
combines controlled frictional characteristics with
high film-strength and excellent load-carrying
properties,thus reducing the power requirement in
machine tools. These oils also increase the use ful life
of machinery by minimizing both wear and corrosion.
Applications
General purpose for machinery lubrication.
Suitable for centralized lubrication system in
machinery.
Benefits
Energy saving.
Reduce machinery maintenance.
Avoid formation of gums in moving parts.
F.D.A White Oil A
F.D.A White Oil A
- food packaging,drugs,cosmetic and many product needs high standard and human harmonious industry.
F.D.A White Oil A
Description:
Mainly used in food packaging, food
processing, pharmaceuticals, cosmetics, plastic processing and medicine industry which
demands extremely high purity oil.
Benefits
White mineral oils.
Almost tasteless & odourless.
Drastically refined to virtually eliminate
polycyclic aromatics(PCA)
Typical physical properties
ITEM
QUALITY ATANDARD
TEST METHOD
KINEMATIC VISCOSITY(40°C)MM/S,DENSITY@40
12.5-16.5
GB/T265
PLASH POINT(OPEN)°C ,
≥150
GB/T3536
°C Pour Poiut
≤4
GB/T3535
Mechanical admiture %
None
GB/T511
Water %
None
GB/T260
Ph
None
GB/T259
condensed-nuclei aromaticsultraviolet
absorbance/cm,260-350nm
0.1
GB/T11081
Heavy Metal PPM
≤10
SH/T405
PB PPM
≤1
SH/T0129
As PPM
≤1
SH/T0130
carbide
PASS
GB/T11079
Solid paraffin
PASS
SH/T0434
- food packaging,drugs,cosmetic and many product needs high standard and human harmonious industry.
F.D.A White Oil A
Description:
Mainly used in food packaging, food
processing, pharmaceuticals, cosmetics, plastic processing and medicine industry which
demands extremely high purity oil.
Benefits
White mineral oils.
Almost tasteless & odourless.
Drastically refined to virtually eliminate
polycyclic aromatics(PCA)
Typical physical properties
ITEM
QUALITY ATANDARD
TEST METHOD
KINEMATIC VISCOSITY(40°C)MM/S,DENSITY@40
12.5-16.5
GB/T265
PLASH POINT(OPEN)°C ,
≥150
GB/T3536
°C Pour Poiut
≤4
GB/T3535
Mechanical admiture %
None
GB/T511
Water %
None
GB/T260
Ph
None
GB/T259
condensed-nuclei aromaticsultraviolet
absorbance/cm,260-350nm
0.1
GB/T11081
Heavy Metal PPM
≤10
SH/T405
PB PPM
≤1
SH/T0129
As PPM
≤1
SH/T0130
carbide
PASS
GB/T11079
Solid paraffin
PASS
SH/T0434
F1600 mud pump
API triplex mud pump
2.Emsco mud pump
3.Mud pump with ISO9001:2008 certification
4.Precise designed mud pump
supreme quality
F1600 mud pump
1.API triplex mud pump
2.Emsco mud pump
3.Mud pump with ISO9001:2008 certification
4.Precise designed mud pump
supreme quality
F-1300 F-1600 Triplex Mud pump (API)
F1300, F1600 triplex drilling mud pump is a horizontal triplex single acting piston pump which is made by Qingzhou Petroleum Machinery Factory Co., Ltd utilizing American technology and API standards. All parts can be changed with each other in the F series mud pump.
F-1300,F-1600 drilling mud pump Specifications
F—1300
F-1600
Type
Triplex Single Acting Piston
Max. Input
956kw (1300hp)
1176kw (1600hp)
Stroke Length
305mm (12")
Max. speed
120 (SMP)
Gear Ratio
4.206
Suction Inlet
305mm (12") flange
Discharge Outlet
5 1/8" flange(35Mpa)
Weights
24.2T
24.8T
F-1300/1600drilling mud pump performance parameter
Liner Size (mm)
130
140
150
160
170
180
Speed
(SPM)
Power
Displacement L/S
QF-1300
QF-1600
KW
HP
KW
HP
130
1036
1408
1275
1733
26.31
30.52
35.04
39.86
45.00
50.45
120
956
1300
1176
1600
24.29
28.17
32.34
36.79
41.54
46.57
110
876
1192
1078
1467
22.27
25.82
29.65
33.72
38.08
42.69
100
797
1083
980
1333
20.24
23.48
26.95
30.66
34.62
38.81
90
717
975
882
1200
18.22
21.13
24.26
27.59
31.16
34.93
Rated pressure
QF-1300
Mpa
34.3
30.5
26.6
23.4
20.7
18.5
kg/cm2
350
310
270
238
211
188
QF-1600
Mpa
34.3
34.3
32.7
28.8
25.5
22.7
kg/cm2
350
350
334
294
260
232
Qingzhou Petroleum Machinery Factory Co., Ltd. wishes us
progress hand in hand and creates a brilliant future.
CONTACT: MS ANNIE
TEL: 86-15866595521
2.Emsco mud pump
3.Mud pump with ISO9001:2008 certification
4.Precise designed mud pump
supreme quality
F1600 mud pump
1.API triplex mud pump
2.Emsco mud pump
3.Mud pump with ISO9001:2008 certification
4.Precise designed mud pump
supreme quality
F-1300 F-1600 Triplex Mud pump (API)
F1300, F1600 triplex drilling mud pump is a horizontal triplex single acting piston pump which is made by Qingzhou Petroleum Machinery Factory Co., Ltd utilizing American technology and API standards. All parts can be changed with each other in the F series mud pump.
F-1300,F-1600 drilling mud pump Specifications
F—1300
F-1600
Type
Triplex Single Acting Piston
Max. Input
956kw (1300hp)
1176kw (1600hp)
Stroke Length
305mm (12")
Max. speed
120 (SMP)
Gear Ratio
4.206
Suction Inlet
305mm (12") flange
Discharge Outlet
5 1/8" flange(35Mpa)
Weights
24.2T
24.8T
F-1300/1600drilling mud pump performance parameter
Liner Size (mm)
130
140
150
160
170
180
Speed
(SPM)
Power
Displacement L/S
QF-1300
QF-1600
KW
HP
KW
HP
130
1036
1408
1275
1733
26.31
30.52
35.04
39.86
45.00
50.45
120
956
1300
1176
1600
24.29
28.17
32.34
36.79
41.54
46.57
110
876
1192
1078
1467
22.27
25.82
29.65
33.72
38.08
42.69
100
797
1083
980
1333
20.24
23.48
26.95
30.66
34.62
38.81
90
717
975
882
1200
18.22
21.13
24.26
27.59
31.16
34.93
Rated pressure
QF-1300
Mpa
34.3
30.5
26.6
23.4
20.7
18.5
kg/cm2
350
310
270
238
211
188
QF-1600
Mpa
34.3
34.3
32.7
28.8
25.5
22.7
kg/cm2
350
350
334
294
260
232
Qingzhou Petroleum Machinery Factory Co., Ltd. wishes us
progress hand in hand and creates a brilliant future.
CONTACT: MS ANNIE
TEL: 86-15866595521
FAST & HIGH EFFICIENT RUST REMOVER FUKKOL DAC 2
FUKKOL DAC 2 RUST REMOVER
1.Super rust remove power
2.Do not harm the metal.
3.Rapid wetting and penetrating ability
FUKKOL DAC 2 RUST REMOVER
http://www.fukkol-lube.com/asp-bin/EN/?page=1
Description:
Fukkol DAC2 is a special viscous liquid acid formulation having a special cationic type penetrant
and stable inhibitor which provides effective protection on most metals and many other surfaces.
It can be used in ways like dipping,brushing or wipeing, etc.
Application
Ideal for prepaint treatment of metal surfaces,
finishing housing and panels, aluminum and tin boilers and molds, brightening aluminum and
stainless steel Also applicable for cleaning radioactive contaminated equipment,
cleaning tile and grouting.
Benefits
DAC 2 has rapid wetting and penetrating ability, thus providing faster rust and corrosion
removal than other commonly used acids. Effective in a wide range of temperatures DAC 2 special inhibitor does not precipitate out and
become inactive even after large amounts of
rust and corrosion have been dissolved. DAC 2 rinses freely and contains no muriatic acid.
Typical physical properties
Physical form
Lipuid
Colour
Clear red
Odour
pleasant aroma
Solubility in Water
100%soluble in water
proportion
1.4
pH 10% Solution
1.8
Rinsing Properties
Excellent
Flash and Fire Point
None
1.Super rust remove power
2.Do not harm the metal.
3.Rapid wetting and penetrating ability
FUKKOL DAC 2 RUST REMOVER
http://www.fukkol-lube.com/asp-bin/EN/?page=1
Description:
Fukkol DAC2 is a special viscous liquid acid formulation having a special cationic type penetrant
and stable inhibitor which provides effective protection on most metals and many other surfaces.
It can be used in ways like dipping,brushing or wipeing, etc.
Application
Ideal for prepaint treatment of metal surfaces,
finishing housing and panels, aluminum and tin boilers and molds, brightening aluminum and
stainless steel Also applicable for cleaning radioactive contaminated equipment,
cleaning tile and grouting.
Benefits
DAC 2 has rapid wetting and penetrating ability, thus providing faster rust and corrosion
removal than other commonly used acids. Effective in a wide range of temperatures DAC 2 special inhibitor does not precipitate out and
become inactive even after large amounts of
rust and corrosion have been dissolved. DAC 2 rinses freely and contains no muriatic acid.
Typical physical properties
Physical form
Lipuid
Colour
Clear red
Odour
pleasant aroma
Solubility in Water
100%soluble in water
proportion
1.4
pH 10% Solution
1.8
Rinsing Properties
Excellent
Flash and Fire Point
None
FB 2T motorcycle engine oil
FB 2T motorcycle engine oil
1. Meets the SH/T 0675-1999 standard.
2. 1L or 4L plastic tin package.
FB 2T motorcycle engine oil
1. Features:
FB 2T motorcycle engine oil is formulated with high quality base stocks and functional additives, and is blended with world's advanced manufacturing techniques. The product is designed to work with air-cooled two-stroke gasoline engines in moderate conditions.
Minimum exhaust level.
2. Application:
Suitable for small size, air cooled, two stroke gasoline engine working in moderate conditions, such as those air cooled, low duty, two stroke motorcycles engine with displacement less than about 50mL.
3. Product Standards:
Meets SH/T 0675-1999.
1. Meets the SH/T 0675-1999 standard.
2. 1L or 4L plastic tin package.
FB 2T motorcycle engine oil
1. Features:
FB 2T motorcycle engine oil is formulated with high quality base stocks and functional additives, and is blended with world's advanced manufacturing techniques. The product is designed to work with air-cooled two-stroke gasoline engines in moderate conditions.
Minimum exhaust level.
2. Application:
Suitable for small size, air cooled, two stroke gasoline engine working in moderate conditions, such as those air cooled, low duty, two stroke motorcycles engine with displacement less than about 50mL.
3. Product Standards:
Meets SH/T 0675-1999.
275 # Ultrahigh Silicone Diffusion Pump Oil
Content:99min
Ultimate Vacuum: 5X10-9 max
Viscosity (25):165-185
Refractive index (25):1.5765-1.5785
275 # Ultrahigh Silicone Diffusion Pump Oil
Appearance: colorless transparent oil
Content:99min
Viscosity (25):165-185
Refractive index (25):1.5765-1.5785
Specific gravity (25/25):1.090-1.100
Flash point:243
Saturated vapor pressure: max 5×10-10 (Reference)
Freezing Point: -14-18
Ultimate Vacuum: ≤5×10-9
Packing:20kg/plastic drum
Ultimate Vacuum: 5X10-9 max
Viscosity (25):165-185
Refractive index (25):1.5765-1.5785
275 # Ultrahigh Silicone Diffusion Pump Oil
Appearance: colorless transparent oil
Content:99min
Viscosity (25):165-185
Refractive index (25):1.5765-1.5785
Specific gravity (25/25):1.090-1.100
Flash point:243
Saturated vapor pressure: max 5×10-10 (Reference)
Freezing Point: -14-18
Ultimate Vacuum: ≤5×10-9
Packing:20kg/plastic drum
FB Two-Cycle Motorcycle Oil
SINOPEC FB Two-Cycle Motorcycle Oil is formulated with high quality base stocks in China and functional additives.
Features and benefits
· Good detergency and dispersancy to inhibit carbon deposit, maintaining engine machine parts cleanliness
· A low-ash formula, low exhaust smoke level, maintaining spark plug cleanliness
· Prevents pre-ignition caused by deposits in combustion chamber
Recommended applications
· Suitable for air-cooled two-cycle motorcycle engines in moderate conditions such as two-cycle motorcycle, felling saw, grass cutter, fog sprayer and motor sleigh
Technical Specification
· Meet or exceed the following performance specification: SH/T 0675 and JASO FB
Typical Properties
Items
FB Two-Cycle Motorcycle Oil
min
6.5
Flash Point(COC) ,ºC min
70
Sediment% max
0.01
Sulfate Ash,wt% max
0.25
Features and benefits
· Good detergency and dispersancy to inhibit carbon deposit, maintaining engine machine parts cleanliness
· A low-ash formula, low exhaust smoke level, maintaining spark plug cleanliness
· Prevents pre-ignition caused by deposits in combustion chamber
Recommended applications
· Suitable for air-cooled two-cycle motorcycle engines in moderate conditions such as two-cycle motorcycle, felling saw, grass cutter, fog sprayer and motor sleigh
Technical Specification
· Meet or exceed the following performance specification: SH/T 0675 and JASO FB
Typical Properties
Items
FB Two-Cycle Motorcycle Oil
min
6.5
Flash Point(COC) ,ºC min
70
Sediment% max
0.01
Sulfate Ash,wt% max
0.25
Friday, October 14, 2011
FC Two-Cycle Motorcycle Oil
SINOPEC FC Two-Cycle Motorcycle Oil is formulated with high quality base stocks in China and functional additives.
Features and benefits
· Outstanding detergency and dispersancy to inhibit carbon deposit, maintaining engine machine parts cleaning
· A low-ash formulation,ultra low exhaust smoke level, reducing environments pollution
· Effectively prevent piston ring sticking in high temperature conditions, preventing pre- ignition caused by deposits in combustion chambers
Recommended applications
· Suitable for air-cooled two-cycle motorcycle engines working in severe conditions
· Recommended fuel/oil ratio at 50:1
Technical Specification
· Meet or exceed the following performance specifications: SH/T 0675 and JASO FC
Typical Properties
Items
FC Two-Cycle Motorcycle Oil
min
6.5
Flash Point(COC) ,ºC min
70
Pour Point,ºC max
-15
Sulfate Ash,wt% max
0.25
Features and benefits
· Outstanding detergency and dispersancy to inhibit carbon deposit, maintaining engine machine parts cleaning
· A low-ash formulation,ultra low exhaust smoke level, reducing environments pollution
· Effectively prevent piston ring sticking in high temperature conditions, preventing pre- ignition caused by deposits in combustion chambers
Recommended applications
· Suitable for air-cooled two-cycle motorcycle engines working in severe conditions
· Recommended fuel/oil ratio at 50:1
Technical Specification
· Meet or exceed the following performance specifications: SH/T 0675 and JASO FC
Typical Properties
Items
FC Two-Cycle Motorcycle Oil
min
6.5
Flash Point(COC) ,ºC min
70
Pour Point,ºC max
-15
Sulfate Ash,wt% max
0.25
FDA High-temperature Lubricating Grease FUKKOL H.T. Paste
1.used on ejectot pin
2.No carbonization,no melting,no flow out
3.1400 degree
4.White-coloured,non-staining,lubricity
FUKKOL H.T. PASTE
http://www.fukkol-lube.com/asp-bin/EN/?page=1
Pretty small consumption ,10gram for one set normally.
it can last around 8000 processing times
no carbonization, no melting and no flow out,great choose for food processing machine.
temperature(max)
1400 degree
operation condition
Low speed
,
oscillating motion
material (available)
steel
,
non-ferrous
metal screw
,
plug,
bayonet joints
.
product life cycle
8000 processing times/white film is destroy
Apply to
nuts and
bolts,sockcts and spindles in refurenes,
steel-and cement mills,
marine and agriculture
function characteristic
anti-seize, anti-wear,ant-corrosion,high temperature
chemical features
White-coloured
,
non-staining,dry film lubricant
additives
anti-oxidation,anti-corrosion,lubricants,etc
Environment
non-toxic,no ferrous metals,graphite,molybdenum-disulphide and sulphide
Certificate
FDA,SGS,ROSH
Typical physical properties
Appearance
White color
Basc
Synthetic oil compound with organic thickener
and combination of white solid lubricants
Unworked penetration
280-320
Specific gravity
1.2g/cc at 20°C
Dropping point
None
Base oil viscosity
21mm2/s at 40°C
Temperature range
-40°C~+1400°C
Friction value
0.10-0.13
Degree of corrosion
1-90
Depth of wear
0.3um
Salt spray test
>500 hours
Four-ball tester(VKA)
3800/4000N
Description:
A white non-carbonized-under-high-temperature lubricating paste for lubrication of all kinds of surfaces subject to high load,
particularly operation at low speed and/or
oscillating motion
and of
steel
and
non-ferrous
metal
screw
,
plug and bayonet joints
.
Applications:
-Anti-Seizing non-destructive disassembly of threaded conncetions subject to high temperatures,
i.e. at internal combustion engines and turbines oven after long service time.
-Corrosion protection for nuts and
bolts,sockcts and spindles in refurenes, steel-and cement mills,
marine and agriculture
.
Benefits:
-Best use-
ONE single paste for MANY application
s
;
-
White-coloured
,
non-staining
,
outstanding lubricity
-
High pressure
,
low friction
and
low wear resistance
, reliable
anti-seize
effect and
corrosion protection
.
-Economical and ecological solution for many plants and shops which have been depending
on a number of special pastes so far.
-contains organic active molybdenum additive for increased performance.
Environment:
Ecology - FUKKOL H.T PASTE is non-toxic,contains no ferrous metals and is free from graphite ,
molybdenum-disulphide and sulphide additives.
Typical physical properties
2.No carbonization,no melting,no flow out
3.1400 degree
4.White-coloured,non-staining,lubricity
FUKKOL H.T. PASTE
http://www.fukkol-lube.com/asp-bin/EN/?page=1
Pretty small consumption ,10gram for one set normally.
it can last around 8000 processing times
no carbonization, no melting and no flow out,great choose for food processing machine.
temperature(max)
1400 degree
operation condition
Low speed
,
oscillating motion
material (available)
steel
,
non-ferrous
metal screw
,
plug,
bayonet joints
.
product life cycle
8000 processing times/white film is destroy
Apply to
nuts and
bolts,sockcts and spindles in refurenes,
steel-and cement mills,
marine and agriculture
function characteristic
anti-seize, anti-wear,ant-corrosion,high temperature
chemical features
White-coloured
,
non-staining,dry film lubricant
additives
anti-oxidation,anti-corrosion,lubricants,etc
Environment
non-toxic,no ferrous metals,graphite,molybdenum-disulphide and sulphide
Certificate
FDA,SGS,ROSH
Typical physical properties
Appearance
White color
Basc
Synthetic oil compound with organic thickener
and combination of white solid lubricants
Unworked penetration
280-320
Specific gravity
1.2g/cc at 20°C
Dropping point
None
Base oil viscosity
21mm2/s at 40°C
Temperature range
-40°C~+1400°C
Friction value
0.10-0.13
Degree of corrosion
1-90
Depth of wear
0.3um
Salt spray test
>500 hours
Four-ball tester(VKA)
3800/4000N
Description:
A white non-carbonized-under-high-temperature lubricating paste for lubrication of all kinds of surfaces subject to high load,
particularly operation at low speed and/or
oscillating motion
and of
steel
and
non-ferrous
metal
screw
,
plug and bayonet joints
.
Applications:
-Anti-Seizing non-destructive disassembly of threaded conncetions subject to high temperatures,
i.e. at internal combustion engines and turbines oven after long service time.
-Corrosion protection for nuts and
bolts,sockcts and spindles in refurenes, steel-and cement mills,
marine and agriculture
.
Benefits:
-Best use-
ONE single paste for MANY application
s
;
-
White-coloured
,
non-staining
,
outstanding lubricity
-
High pressure
,
low friction
and
low wear resistance
, reliable
anti-seize
effect and
corrosion protection
.
-Economical and ecological solution for many plants and shops which have been depending
on a number of special pastes so far.
-contains organic active molybdenum additive for increased performance.
Environment:
Ecology - FUKKOL H.T PASTE is non-toxic,contains no ferrous metals and is free from graphite ,
molybdenum-disulphide and sulphide additives.
Typical physical properties
FDA High-temperature Lubricating Grease FUKKOL H.T. Paste
1.used on ejectot pin
2.No carbonization,no melting,no flow out
3.1400 degree
4.White-coloured,non-staining,lubricity
FUKKOL H.T. PASTE
http://www.fukkol-lube.com/asp-bin/EN/?page=1
Pretty small consumption ,10gram for one set normally.
it can last around 8000 processing times
no carbonization, no melting and no flow out,great choose for food processing machine.
temperature(max)
1400 degree
operation condition
Low speed
,
oscillating motion
material (available)
steel
,
non-ferrous
metal screw
,
plug,
bayonet joints
.
product life cycle
8000 processing times/white film is destroy
Apply to
nuts and
bolts,sockcts and spindles in refurenes,
steel-and cement mills,
marine and agriculture
function characteristic
anti-seize, anti-wear,ant-corrosion,high temperature
chemical features
White-coloured
,
non-staining,dry film lubricant
additives
anti-oxidation,anti-corrosion,lubricants,etc
Environment
non-toxic,no ferrous metals,graphite,molybdenum-disulphide and sulphide
Certificate
FDA,SGS,ROSH
Typical physical properties
Appearance
White color
Basc
Synthetic oil compound with organic thickener
and combination of white solid lubricants
Unworked penetration
280-320
Specific gravity
1.2g/cc at 20°C
Dropping point
None
Base oil viscosity
21mm2/s at 40°C
Temperature range
-40°C~+1400°C
Friction value
0.10-0.13
Degree of corrosion
1-90
Depth of wear
0.3um
Salt spray test
>500 hours
Four-ball tester(VKA)
3800/4000N
Description:
A white non-carbonized-under-high-temperature lubricating paste for lubrication of all kinds of surfaces subject to high load,
particularly operation at low speed and/or
oscillating motion
and of
steel
and
non-ferrous
metal
screw
,
plug and bayonet joints
.
Applications:
-Anti-Seizing non-destructive disassembly of threaded conncetions subject to high temperatures,
i.e. at internal combustion engines and turbines oven after long service time.
-Corrosion protection for nuts and
bolts,sockcts and spindles in refurenes, steel-and cement mills,
marine and agriculture
.
Benefits:
-Best use-
ONE single paste for MANY application
s
;
-
White-coloured
,
non-staining
,
outstanding lubricity
-
High pressure
,
low friction
and
low wear resistance
, reliable
anti-seize
effect and
corrosion protection
.
-Economical and ecological solution for many plants and shops which have been depending
on a number of special pastes so far.
-contains organic active molybdenum additive for increased performance.
Environment:
Ecology - FUKKOL H.T PASTE is non-toxic,contains no ferrous metals and is free from graphite ,
molybdenum-disulphide and sulphide additives.
Typical physical properties
2.No carbonization,no melting,no flow out
3.1400 degree
4.White-coloured,non-staining,lubricity
FUKKOL H.T. PASTE
http://www.fukkol-lube.com/asp-bin/EN/?page=1
Pretty small consumption ,10gram for one set normally.
it can last around 8000 processing times
no carbonization, no melting and no flow out,great choose for food processing machine.
temperature(max)
1400 degree
operation condition
Low speed
,
oscillating motion
material (available)
steel
,
non-ferrous
metal screw
,
plug,
bayonet joints
.
product life cycle
8000 processing times/white film is destroy
Apply to
nuts and
bolts,sockcts and spindles in refurenes,
steel-and cement mills,
marine and agriculture
function characteristic
anti-seize, anti-wear,ant-corrosion,high temperature
chemical features
White-coloured
,
non-staining,dry film lubricant
additives
anti-oxidation,anti-corrosion,lubricants,etc
Environment
non-toxic,no ferrous metals,graphite,molybdenum-disulphide and sulphide
Certificate
FDA,SGS,ROSH
Typical physical properties
Appearance
White color
Basc
Synthetic oil compound with organic thickener
and combination of white solid lubricants
Unworked penetration
280-320
Specific gravity
1.2g/cc at 20°C
Dropping point
None
Base oil viscosity
21mm2/s at 40°C
Temperature range
-40°C~+1400°C
Friction value
0.10-0.13
Degree of corrosion
1-90
Depth of wear
0.3um
Salt spray test
>500 hours
Four-ball tester(VKA)
3800/4000N
Description:
A white non-carbonized-under-high-temperature lubricating paste for lubrication of all kinds of surfaces subject to high load,
particularly operation at low speed and/or
oscillating motion
and of
steel
and
non-ferrous
metal
screw
,
plug and bayonet joints
.
Applications:
-Anti-Seizing non-destructive disassembly of threaded conncetions subject to high temperatures,
i.e. at internal combustion engines and turbines oven after long service time.
-Corrosion protection for nuts and
bolts,sockcts and spindles in refurenes, steel-and cement mills,
marine and agriculture
.
Benefits:
-Best use-
ONE single paste for MANY application
s
;
-
White-coloured
,
non-staining
,
outstanding lubricity
-
High pressure
,
low friction
and
low wear resistance
, reliable
anti-seize
effect and
corrosion protection
.
-Economical and ecological solution for many plants and shops which have been depending
on a number of special pastes so far.
-contains organic active molybdenum additive for increased performance.
Environment:
Ecology - FUKKOL H.T PASTE is non-toxic,contains no ferrous metals and is free from graphite ,
molybdenum-disulphide and sulphide additives.
Typical physical properties
FDA MOULD RELEASE AGENT
FDA MOULD RELEASE AGENT
(FOOD GRADE)
Free from so-called 'SILICONE PROBLEMS'
Got NSF H1 certification
FUKKOL MOULD RELEASE AGENT
(FOOD GRADE)
http://www.fukkol-lube.com/asp-bin/EN/?page=1
Description:
*FUKKOL MOULD RELEASEAGENT (FOOD GRADE) is an aerosol applied release agent formulated to provide a quick,
effective,non-staining release of plastics and rubber for most types of moulding process.
It is
excellent plastic and rubber mould release agent
for household
and electrical appliance industry and also
suitable for all thermal plastic
use,especially for SAN plastic resin.
In addition, it is specifically designed for products subject to subsequent processes such as printing,painting,plating,
hot stamping and bonding operation requiring being
free from so-called 'SILICONE PROBLEMS'.
Being NSF H1 certificated, it is also suitable for may-contact-food situations.
Summary of Benefits
* Ultra fine spray gives controlled application with complete coverage.
* Improved finish and reduced risk of over application.
* Reduces problems associated with marking and transfer. Highly economical, efficient release.
Only one pass required for many shots of ejection.
*
Effective and long lasting film
provides more numbers of releases than most silicone formulations.
*Low environmental impact. Contains no CFC propellant.
* Will not affect subsequent operations.
* lf necessary, fiIm can be completely removed by mild solvent like alcohol or water soluble cleaner..
Typical Data
Active ingredient, Solvent, Propellant, Modified Silicone
Oil, Hydrocarbon Solvent
, LPG
Precautions
*Pressurised container, protect from sunlight, store at
temperature below 50°C
*Do not puncture or incinerate.
*Do not spray on to naked flames.
*Inflammable
(FOOD GRADE)
Free from so-called 'SILICONE PROBLEMS'
Got NSF H1 certification
FUKKOL MOULD RELEASE AGENT
(FOOD GRADE)
http://www.fukkol-lube.com/asp-bin/EN/?page=1
Description:
*FUKKOL MOULD RELEASEAGENT (FOOD GRADE) is an aerosol applied release agent formulated to provide a quick,
effective,non-staining release of plastics and rubber for most types of moulding process.
It is
excellent plastic and rubber mould release agent
for household
and electrical appliance industry and also
suitable for all thermal plastic
use,especially for SAN plastic resin.
In addition, it is specifically designed for products subject to subsequent processes such as printing,painting,plating,
hot stamping and bonding operation requiring being
free from so-called 'SILICONE PROBLEMS'.
Being NSF H1 certificated, it is also suitable for may-contact-food situations.
Summary of Benefits
* Ultra fine spray gives controlled application with complete coverage.
* Improved finish and reduced risk of over application.
* Reduces problems associated with marking and transfer. Highly economical, efficient release.
Only one pass required for many shots of ejection.
*
Effective and long lasting film
provides more numbers of releases than most silicone formulations.
*Low environmental impact. Contains no CFC propellant.
* Will not affect subsequent operations.
* lf necessary, fiIm can be completely removed by mild solvent like alcohol or water soluble cleaner..
Typical Data
Active ingredient, Solvent, Propellant, Modified Silicone
Oil, Hydrocarbon Solvent
, LPG
Precautions
*Pressurised container, protect from sunlight, store at
temperature below 50°C
*Do not puncture or incinerate.
*Do not spray on to naked flames.
*Inflammable
FDA MOULD RELEASER
FDA MOULD RELEASER
(FOOD GRADE)
Free from so-called 'SILICONE PROBLEMS'
Got NSF H1 certification
FUKKOL MOULD RELEASE AGENT
(FOOD GRADE)
http://www.fukkol-lube.com/asp-bin/EN/?page=1
Description:
*FUKKOL MOULD RELEASEAGENT (FOOD GRADE) is an aerosol applied release agent formulated to provide a quick,
effective,non-staining release of plastics and rubber for most types of moulding process.
It is
excellent plastic and rubber mould release agent
for household
and electrical appliance industry and also
suitable for all thermal plastic
use,especially for SAN plastic resin.
In addition, it is specifically designed for products subject to subsequent processes such as printing,painting,plating,
hot stamping and bonding operation requiring being
free from so-called 'SILICONE PROBLEMS'.
Being NSF H1 certificated, it is also suitable for may-contact-food situations.
Summary of Benefits
* Ultra fine spray gives controlled application with complete coverage.
* Improved finish and reduced risk of over application.
* Reduces problems associated with marking and transfer. Highly economical, efficient release.
Only one pass required for many shots of ejection.
*
Effective and long lasting film
provides more numbers of releases than most silicone formulations.
*Low environmental impact. Contains no CFC propellant.
* Will not affect subsequent operations.
* lf necessary, fiIm can be completely removed by mild solvent like alcohol or water soluble cleaner..
Typical Data
Active ingredient, Solvent, Propellant, Modified Silicone
Oil, Hydrocarbon Solvent
, LPG
Precautions
*Pressurised container, protect from sunlight, store at
temperature below 50°C
*Do not puncture or incinerate.
*Do not spray on to naked flames.
*Inflammable
(FOOD GRADE)
Free from so-called 'SILICONE PROBLEMS'
Got NSF H1 certification
FUKKOL MOULD RELEASE AGENT
(FOOD GRADE)
http://www.fukkol-lube.com/asp-bin/EN/?page=1
Description:
*FUKKOL MOULD RELEASEAGENT (FOOD GRADE) is an aerosol applied release agent formulated to provide a quick,
effective,non-staining release of plastics and rubber for most types of moulding process.
It is
excellent plastic and rubber mould release agent
for household
and electrical appliance industry and also
suitable for all thermal plastic
use,especially for SAN plastic resin.
In addition, it is specifically designed for products subject to subsequent processes such as printing,painting,plating,
hot stamping and bonding operation requiring being
free from so-called 'SILICONE PROBLEMS'.
Being NSF H1 certificated, it is also suitable for may-contact-food situations.
Summary of Benefits
* Ultra fine spray gives controlled application with complete coverage.
* Improved finish and reduced risk of over application.
* Reduces problems associated with marking and transfer. Highly economical, efficient release.
Only one pass required for many shots of ejection.
*
Effective and long lasting film
provides more numbers of releases than most silicone formulations.
*Low environmental impact. Contains no CFC propellant.
* Will not affect subsequent operations.
* lf necessary, fiIm can be completely removed by mild solvent like alcohol or water soluble cleaner..
Typical Data
Active ingredient, Solvent, Propellant, Modified Silicone
Oil, Hydrocarbon Solvent
, LPG
Precautions
*Pressurised container, protect from sunlight, store at
temperature below 50°C
*Do not puncture or incinerate.
*Do not spray on to naked flames.
*Inflammable
FDA RELEASE AGENT FUKKOL
FDA RELEASE AGENT FUKKOL
(FOOD GRADE)
Free from so-called 'SILICONE PROBLEMS'
Got NSF H1 certification
FUKKOL MOULD RELEASE AGENT
(FOOD GRADE)
http://www.fukkol-lube.com/asp-bin/EN/?page=1
Description:
*FUKKOL MOULD RELEASEAGENT (FOOD GRADE) is an aerosol applied release agent formulated to provide a quick,
effective,non-staining release of plastics and rubber for most types of moulding process.
It is
excellent plastic and rubber mould release agent
for household
and electrical appliance industry and also
suitable for all thermal plastic
use,especially for SAN plastic resin.
In addition, it is specifically designed for products subject to subsequent processes such as printing,painting,plating,
hot stamping and bonding operation requiring being
free from so-called 'SILICONE PROBLEMS'.
Being NSF H1 certificated, it is also suitable for may-contact-food situations.
Summary of Benefits
* Ultra fine spray gives controlled application with complete coverage.
* Improved finish and reduced risk of over application.
* Reduces problems associated with marking and transfer. Highly economical, efficient release.
Only one pass required for many shots of ejection.
*
Effective and long lasting film
provides more numbers of releases than most silicone formulations.
*Low environmental impact. Contains no CFC propellant.
* Will not affect subsequent operations.
* lf necessary, fiIm can be completely removed by mild solvent like alcohol or water soluble cleaner..
Typical Data
Active ingredient, Solvent, Propellant, Modified Silicone
Oil, Hydrocarbon Solvent
, LPG
Precautions
*Pressurised container, protect from sunlight, store at
temperature below 50°C
*Do not puncture or incinerate.
*Do not spray on to naked flames.
*Inflammable
(FOOD GRADE)
Free from so-called 'SILICONE PROBLEMS'
Got NSF H1 certification
FUKKOL MOULD RELEASE AGENT
(FOOD GRADE)
http://www.fukkol-lube.com/asp-bin/EN/?page=1
Description:
*FUKKOL MOULD RELEASEAGENT (FOOD GRADE) is an aerosol applied release agent formulated to provide a quick,
effective,non-staining release of plastics and rubber for most types of moulding process.
It is
excellent plastic and rubber mould release agent
for household
and electrical appliance industry and also
suitable for all thermal plastic
use,especially for SAN plastic resin.
In addition, it is specifically designed for products subject to subsequent processes such as printing,painting,plating,
hot stamping and bonding operation requiring being
free from so-called 'SILICONE PROBLEMS'.
Being NSF H1 certificated, it is also suitable for may-contact-food situations.
Summary of Benefits
* Ultra fine spray gives controlled application with complete coverage.
* Improved finish and reduced risk of over application.
* Reduces problems associated with marking and transfer. Highly economical, efficient release.
Only one pass required for many shots of ejection.
*
Effective and long lasting film
provides more numbers of releases than most silicone formulations.
*Low environmental impact. Contains no CFC propellant.
* Will not affect subsequent operations.
* lf necessary, fiIm can be completely removed by mild solvent like alcohol or water soluble cleaner..
Typical Data
Active ingredient, Solvent, Propellant, Modified Silicone
Oil, Hydrocarbon Solvent
, LPG
Precautions
*Pressurised container, protect from sunlight, store at
temperature below 50°C
*Do not puncture or incinerate.
*Do not spray on to naked flames.
*Inflammable
FDA grade Grease FUKKOL H.T. Paste
1.used on ejectot pin
2.No carbonization,no melting,no flow out
3.1400 degree
4.White-coloured,non-staining,lubricity
FUKKOL H.T. PASTE
http://www.fukkol-lube.com/asp-bin/EN/?page=1
Pretty small consumption ,10gram for one set normally.
it can last around 8000 processing times
no carbonization, no melting and no flow out,great choose for food processing machine.
temperature(max)
1400 degree
operation condition
Low speed
,
oscillating motion
material (available)
steel
,
non-ferrous
metal screw
,
plug,
bayonet joints
.
product life cycle
8000 processing times/white film is destroy
Apply to
nuts and
bolts,sockcts and spindles in refurenes,
steel-and cement mills,
marine and agriculture
function characteristic
anti-seize, anti-wear,ant-corrosion,high temperature
chemical features
White-coloured
,
non-staining,dry film lubricant
additives
anti-oxidation,anti-corrosion,lubricants,etc
Environment
non-toxic,no ferrous metals,graphite,molybdenum-disulphide and sulphide
Certificate
FDA,SGS,ROSH
Typical physical properties
Appearance
White color
Basc
Synthetic oil compound with organic thickener
and combination of white solid lubricants
Unworked penetration
280-320
Specific gravity
1.2g/cc at 20°C
Dropping point
None
Base oil viscosity
21mm2/s at 40°C
Temperature range
-40°C~+1400°C
Friction value
0.10-0.13
Degree of corrosion
1-90
Depth of wear
0.3um
Salt spray test
>500 hours
Four-ball tester(VKA)
3800/4000N
Description:
A white non-carbonized-under-high-temperature lubricating paste for lubrication of all kinds of surfaces subject to high load,
particularly operation at low speed and/or
oscillating motion
and of
steel
and
non-ferrous
metal
screw
,
plug and bayonet joints
.
Applications:
-Anti-Seizing non-destructive disassembly of threaded conncetions subject to high temperatures,
i.e. at internal combustion engines and turbines oven after long service time.
-Corrosion protection for nuts and
bolts,sockcts and spindles in refurenes, steel-and cement mills,
marine and agriculture
.
Benefits:
-Best use-
ONE single paste for MANY application
s
;
-
White-coloured
,
non-staining
,
outstanding lubricity
-
High pressure
,
low friction
and
low wear resistance
, reliable
anti-seize
effect and
corrosion protection
.
-Economical and ecological solution for many plants and shops which have been depending
on a number of special pastes so far.
-contains organic active molybdenum additive for increased performance.
Environment:
Ecology - FUKKOL H.T PASTE is non-toxic,contains no ferrous metals and is free from graphite ,
molybdenum-disulphide and sulphide additives.
Typical physical properties
2.No carbonization,no melting,no flow out
3.1400 degree
4.White-coloured,non-staining,lubricity
FUKKOL H.T. PASTE
http://www.fukkol-lube.com/asp-bin/EN/?page=1
Pretty small consumption ,10gram for one set normally.
it can last around 8000 processing times
no carbonization, no melting and no flow out,great choose for food processing machine.
temperature(max)
1400 degree
operation condition
Low speed
,
oscillating motion
material (available)
steel
,
non-ferrous
metal screw
,
plug,
bayonet joints
.
product life cycle
8000 processing times/white film is destroy
Apply to
nuts and
bolts,sockcts and spindles in refurenes,
steel-and cement mills,
marine and agriculture
function characteristic
anti-seize, anti-wear,ant-corrosion,high temperature
chemical features
White-coloured
,
non-staining,dry film lubricant
additives
anti-oxidation,anti-corrosion,lubricants,etc
Environment
non-toxic,no ferrous metals,graphite,molybdenum-disulphide and sulphide
Certificate
FDA,SGS,ROSH
Typical physical properties
Appearance
White color
Basc
Synthetic oil compound with organic thickener
and combination of white solid lubricants
Unworked penetration
280-320
Specific gravity
1.2g/cc at 20°C
Dropping point
None
Base oil viscosity
21mm2/s at 40°C
Temperature range
-40°C~+1400°C
Friction value
0.10-0.13
Degree of corrosion
1-90
Depth of wear
0.3um
Salt spray test
>500 hours
Four-ball tester(VKA)
3800/4000N
Description:
A white non-carbonized-under-high-temperature lubricating paste for lubrication of all kinds of surfaces subject to high load,
particularly operation at low speed and/or
oscillating motion
and of
steel
and
non-ferrous
metal
screw
,
plug and bayonet joints
.
Applications:
-Anti-Seizing non-destructive disassembly of threaded conncetions subject to high temperatures,
i.e. at internal combustion engines and turbines oven after long service time.
-Corrosion protection for nuts and
bolts,sockcts and spindles in refurenes, steel-and cement mills,
marine and agriculture
.
Benefits:
-Best use-
ONE single paste for MANY application
s
;
-
White-coloured
,
non-staining
,
outstanding lubricity
-
High pressure
,
low friction
and
low wear resistance
, reliable
anti-seize
effect and
corrosion protection
.
-Economical and ecological solution for many plants and shops which have been depending
on a number of special pastes so far.
-contains organic active molybdenum additive for increased performance.
Environment:
Ecology - FUKKOL H.T PASTE is non-toxic,contains no ferrous metals and is free from graphite ,
molybdenum-disulphide and sulphide additives.
Typical physical properties
FDA grade Lubricating Grease FUKKOL H.T. Paste
1.used on ejectot pin
2.No carbonization,no melting,no flow out
3.1400 degree
4.White-coloured,non-staining,lubricity
FUKKOL H.T. PASTE
http://www.fukkol-lube.com/asp-bin/EN/?page=1
Pretty small consumption ,10gram for one set normally.
it can last around 8000 processing times
no carbonization, no melting and no flow out,great choose for food processing machine.
temperature(max)
1400 degree
operation condition
Low speed
,
oscillating motion
material (available)
steel
,
non-ferrous
metal screw
,
plug,
bayonet joints
.
product life cycle
8000 processing times/white film is destroy
Apply to
nuts and
bolts,sockcts and spindles in refurenes,
steel-and cement mills,
marine and agriculture
function characteristic
anti-seize, anti-wear,ant-corrosion,high temperature
chemical features
White-coloured
,
non-staining,dry film lubricant
additives
anti-oxidation,anti-corrosion,lubricants,etc
Environment
non-toxic,no ferrous metals,graphite,molybdenum-disulphide and sulphide
Certificate
FDA,SGS,ROSH
Typical physical properties
Appearance
White color
Basc
Synthetic oil compound with organic thickener
and combination of white solid lubricants
Unworked penetration
280-320
Specific gravity
1.2g/cc at 20°C
Dropping point
None
Base oil viscosity
21mm2/s at 40°C
Temperature range
-40°C~+1400°C
Friction value
0.10-0.13
Degree of corrosion
1-90
Depth of wear
0.3um
Salt spray test
>500 hours
Four-ball tester(VKA)
3800/4000N
Description:
A white non-carbonized-under-high-temperature lubricating paste for lubrication of all kinds of surfaces subject to high load,
particularly operation at low speed and/or
oscillating motion
and of
steel
and
non-ferrous
metal
screw
,
plug and bayonet joints
.
Applications:
-Anti-Seizing non-destructive disassembly of threaded conncetions subject to high temperatures,
i.e. at internal combustion engines and turbines oven after long service time.
-Corrosion protection for nuts and
bolts,sockcts and spindles in refurenes, steel-and cement mills,
marine and agriculture
.
Benefits:
-Best use-
ONE single paste for MANY application
s
;
-
White-coloured
,
non-staining
,
outstanding lubricity
-
High pressure
,
low friction
and
low wear resistance
, reliable
anti-seize
effect and
corrosion protection
.
-Economical and ecological solution for many plants and shops which have been depending
on a number of special pastes so far.
-contains organic active molybdenum additive for increased performance.
Environment:
Ecology - FUKKOL H.T PASTE is non-toxic,contains no ferrous metals and is free from graphite ,
molybdenum-disulphide and sulphide additives.
Typical physical properties
2.No carbonization,no melting,no flow out
3.1400 degree
4.White-coloured,non-staining,lubricity
FUKKOL H.T. PASTE
http://www.fukkol-lube.com/asp-bin/EN/?page=1
Pretty small consumption ,10gram for one set normally.
it can last around 8000 processing times
no carbonization, no melting and no flow out,great choose for food processing machine.
temperature(max)
1400 degree
operation condition
Low speed
,
oscillating motion
material (available)
steel
,
non-ferrous
metal screw
,
plug,
bayonet joints
.
product life cycle
8000 processing times/white film is destroy
Apply to
nuts and
bolts,sockcts and spindles in refurenes,
steel-and cement mills,
marine and agriculture
function characteristic
anti-seize, anti-wear,ant-corrosion,high temperature
chemical features
White-coloured
,
non-staining,dry film lubricant
additives
anti-oxidation,anti-corrosion,lubricants,etc
Environment
non-toxic,no ferrous metals,graphite,molybdenum-disulphide and sulphide
Certificate
FDA,SGS,ROSH
Typical physical properties
Appearance
White color
Basc
Synthetic oil compound with organic thickener
and combination of white solid lubricants
Unworked penetration
280-320
Specific gravity
1.2g/cc at 20°C
Dropping point
None
Base oil viscosity
21mm2/s at 40°C
Temperature range
-40°C~+1400°C
Friction value
0.10-0.13
Degree of corrosion
1-90
Depth of wear
0.3um
Salt spray test
>500 hours
Four-ball tester(VKA)
3800/4000N
Description:
A white non-carbonized-under-high-temperature lubricating paste for lubrication of all kinds of surfaces subject to high load,
particularly operation at low speed and/or
oscillating motion
and of
steel
and
non-ferrous
metal
screw
,
plug and bayonet joints
.
Applications:
-Anti-Seizing non-destructive disassembly of threaded conncetions subject to high temperatures,
i.e. at internal combustion engines and turbines oven after long service time.
-Corrosion protection for nuts and
bolts,sockcts and spindles in refurenes, steel-and cement mills,
marine and agriculture
.
Benefits:
-Best use-
ONE single paste for MANY application
s
;
-
White-coloured
,
non-staining
,
outstanding lubricity
-
High pressure
,
low friction
and
low wear resistance
, reliable
anti-seize
effect and
corrosion protection
.
-Economical and ecological solution for many plants and shops which have been depending
on a number of special pastes so far.
-contains organic active molybdenum additive for increased performance.
Environment:
Ecology - FUKKOL H.T PASTE is non-toxic,contains no ferrous metals and is free from graphite ,
molybdenum-disulphide and sulphide additives.
Typical physical properties
FDA Grease FUKKOL H.T. Paste
1.used on ejectot pin
2.No carbonization,no melting,no flow out
3.1400 degree
4.White-coloured,non-staining,lubricity
FUKKOL H.T. PASTE
http://www.fukkol-lube.com/asp-bin/EN/?page=1
Pretty small consumption ,10gram for one set normally.
it can last around 8000 processing times
no carbonization, no melting and no flow out,great choose for food processing machine.
temperature(max)
1400 degree
operation condition
Low speed
,
oscillating motion
material (available)
steel
,
non-ferrous
metal screw
,
plug,
bayonet joints
.
product life cycle
8000 processing times/white film is destroy
Apply to
nuts and
bolts,sockcts and spindles in refurenes,
steel-and cement mills,
marine and agriculture
function characteristic
anti-seize, anti-wear,ant-corrosion,high temperature
chemical features
White-coloured
,
non-staining,dry film lubricant
additives
anti-oxidation,anti-corrosion,lubricants,etc
Environment
non-toxic,no ferrous metals,graphite,molybdenum-disulphide and sulphide
Certificate
FDA,SGS,ROSH
Typical physical properties
Appearance
White color
Basc
Synthetic oil compound with organic thickener
and combination of white solid lubricants
Unworked penetration
280-320
Specific gravity
1.2g/cc at 20°C
Dropping point
None
Base oil viscosity
21mm2/s at 40°C
Temperature range
-40°C~+1400°C
Friction value
0.10-0.13
Degree of corrosion
1-90
Depth of wear
0.3um
Salt spray test
>500 hours
Four-ball tester(VKA)
3800/4000N
Description:
A white non-carbonized-under-high-temperature lubricating paste for lubrication of all kinds of surfaces subject to high load,
particularly operation at low speed and/or
oscillating motion
and of
steel
and
non-ferrous
metal
screw
,
plug and bayonet joints
.
Applications:
-Anti-Seizing non-destructive disassembly of threaded conncetions subject to high temperatures,
i.e. at internal combustion engines and turbines oven after long service time.
-Corrosion protection for nuts and
bolts,sockcts and spindles in refurenes, steel-and cement mills,
marine and agriculture
.
Benefits:
-Best use-
ONE single paste for MANY application
s
;
-
White-coloured
,
non-staining
,
outstanding lubricity
-
High pressure
,
low friction
and
low wear resistance
, reliable
anti-seize
effect and
corrosion protection
.
-Economical and ecological solution for many plants and shops which have been depending
on a number of special pastes so far.
-contains organic active molybdenum additive for increased performance.
Environment:
Ecology - FUKKOL H.T PASTE is non-toxic,contains no ferrous metals and is free from graphite ,
molybdenum-disulphide and sulphide additives.
Typical physical properties
2.No carbonization,no melting,no flow out
3.1400 degree
4.White-coloured,non-staining,lubricity
FUKKOL H.T. PASTE
http://www.fukkol-lube.com/asp-bin/EN/?page=1
Pretty small consumption ,10gram for one set normally.
it can last around 8000 processing times
no carbonization, no melting and no flow out,great choose for food processing machine.
temperature(max)
1400 degree
operation condition
Low speed
,
oscillating motion
material (available)
steel
,
non-ferrous
metal screw
,
plug,
bayonet joints
.
product life cycle
8000 processing times/white film is destroy
Apply to
nuts and
bolts,sockcts and spindles in refurenes,
steel-and cement mills,
marine and agriculture
function characteristic
anti-seize, anti-wear,ant-corrosion,high temperature
chemical features
White-coloured
,
non-staining,dry film lubricant
additives
anti-oxidation,anti-corrosion,lubricants,etc
Environment
non-toxic,no ferrous metals,graphite,molybdenum-disulphide and sulphide
Certificate
FDA,SGS,ROSH
Typical physical properties
Appearance
White color
Basc
Synthetic oil compound with organic thickener
and combination of white solid lubricants
Unworked penetration
280-320
Specific gravity
1.2g/cc at 20°C
Dropping point
None
Base oil viscosity
21mm2/s at 40°C
Temperature range
-40°C~+1400°C
Friction value
0.10-0.13
Degree of corrosion
1-90
Depth of wear
0.3um
Salt spray test
>500 hours
Four-ball tester(VKA)
3800/4000N
Description:
A white non-carbonized-under-high-temperature lubricating paste for lubrication of all kinds of surfaces subject to high load,
particularly operation at low speed and/or
oscillating motion
and of
steel
and
non-ferrous
metal
screw
,
plug and bayonet joints
.
Applications:
-Anti-Seizing non-destructive disassembly of threaded conncetions subject to high temperatures,
i.e. at internal combustion engines and turbines oven after long service time.
-Corrosion protection for nuts and
bolts,sockcts and spindles in refurenes, steel-and cement mills,
marine and agriculture
.
Benefits:
-Best use-
ONE single paste for MANY application
s
;
-
White-coloured
,
non-staining
,
outstanding lubricity
-
High pressure
,
low friction
and
low wear resistance
, reliable
anti-seize
effect and
corrosion protection
.
-Economical and ecological solution for many plants and shops which have been depending
on a number of special pastes so far.
-contains organic active molybdenum additive for increased performance.
Environment:
Ecology - FUKKOL H.T PASTE is non-toxic,contains no ferrous metals and is free from graphite ,
molybdenum-disulphide and sulphide additives.
Typical physical properties
275 # Ultrahigh Silicone Diffusion Pump Oil
Content:99min
Ultimate Vacuum: 5X10-9 max
Viscosity (25):165-185
Refractive index (25):1.5765-1.5785
275 # Ultrahigh Silicone Diffusion Pump Oil
Appearance: colorless transparent oil
Content:99min
Viscosity (25):165-185
Refractive index (25):1.5765-1.5785
Specific gravity (25/25):1.090-1.100
Flash point:243
Saturated vapor pressure: max 5×10-10 (Reference)
Freezing Point: -14-18
Ultimate Vacuum: ≤5×10-9
Packing:20kg/plastic drum
Ultimate Vacuum: 5X10-9 max
Viscosity (25):165-185
Refractive index (25):1.5765-1.5785
275 # Ultrahigh Silicone Diffusion Pump Oil
Appearance: colorless transparent oil
Content:99min
Viscosity (25):165-185
Refractive index (25):1.5765-1.5785
Specific gravity (25/25):1.090-1.100
Flash point:243
Saturated vapor pressure: max 5×10-10 (Reference)
Freezing Point: -14-18
Ultimate Vacuum: ≤5×10-9
Packing:20kg/plastic drum
FDA Lubricant Grease FUKKOL H.T. Paste
1.used on ejectot pin
2.No carbonization,no melting,no flow out
3.1400 degree
4.White-coloured,non-staining,lubricity
FUKKOL H.T. PASTE
http://www.fukkol-lube.com/asp-bin/EN/?page=1
Pretty small consumption ,10gram for one set normally.
it can last around 8000 processing times
no carbonization, no melting and no flow out,great choose for food processing machine.
temperature(max)
1400 degree
operation condition
Low speed
,
oscillating motion
material (available)
steel
,
non-ferrous
metal screw
,
plug,
bayonet joints
.
product life cycle
8000 processing times/white film is destroy
Apply to
nuts and
bolts,sockcts and spindles in refurenes,
steel-and cement mills,
marine and agriculture
function characteristic
anti-seize, anti-wear,ant-corrosion,high temperature
chemical features
White-coloured
,
non-staining,dry film lubricant
additives
anti-oxidation,anti-corrosion,lubricants,etc
Environment
non-toxic,no ferrous metals,graphite,molybdenum-disulphide and sulphide
Certificate
FDA,SGS,ROSH
Typical physical properties
Appearance
White color
Basc
Synthetic oil compound with organic thickener
and combination of white solid lubricants
Unworked penetration
280-320
Specific gravity
1.2g/cc at 20°C
Dropping point
None
Base oil viscosity
21mm2/s at 40°C
Temperature range
-40°C~+1400°C
Friction value
0.10-0.13
Degree of corrosion
1-90
Depth of wear
0.3um
Salt spray test
>500 hours
Four-ball tester(VKA)
3800/4000N
Description:
A white non-carbonized-under-high-temperature lubricating paste for lubrication of all kinds of surfaces subject to high load,
particularly operation at low speed and/or
oscillating motion
and of
steel
and
non-ferrous
metal
screw
,
plug and bayonet joints
.
Applications:
-Anti-Seizing non-destructive disassembly of threaded conncetions subject to high temperatures,
i.e. at internal combustion engines and turbines oven after long service time.
-Corrosion protection for nuts and
bolts,sockcts and spindles in refurenes, steel-and cement mills,
marine and agriculture
.
Benefits:
-Best use-
ONE single paste for MANY application
s
;
-
White-coloured
,
non-staining
,
outstanding lubricity
-
High pressure
,
low friction
and
low wear resistance
, reliable
anti-seize
effect and
corrosion protection
.
-Economical and ecological solution for many plants and shops which have been depending
on a number of special pastes so far.
-contains organic active molybdenum additive for increased performance.
Environment:
Ecology - FUKKOL H.T PASTE is non-toxic,contains no ferrous metals and is free from graphite ,
molybdenum-disulphide and sulphide additives.
Typical physical properties
2.No carbonization,no melting,no flow out
3.1400 degree
4.White-coloured,non-staining,lubricity
FUKKOL H.T. PASTE
http://www.fukkol-lube.com/asp-bin/EN/?page=1
Pretty small consumption ,10gram for one set normally.
it can last around 8000 processing times
no carbonization, no melting and no flow out,great choose for food processing machine.
temperature(max)
1400 degree
operation condition
Low speed
,
oscillating motion
material (available)
steel
,
non-ferrous
metal screw
,
plug,
bayonet joints
.
product life cycle
8000 processing times/white film is destroy
Apply to
nuts and
bolts,sockcts and spindles in refurenes,
steel-and cement mills,
marine and agriculture
function characteristic
anti-seize, anti-wear,ant-corrosion,high temperature
chemical features
White-coloured
,
non-staining,dry film lubricant
additives
anti-oxidation,anti-corrosion,lubricants,etc
Environment
non-toxic,no ferrous metals,graphite,molybdenum-disulphide and sulphide
Certificate
FDA,SGS,ROSH
Typical physical properties
Appearance
White color
Basc
Synthetic oil compound with organic thickener
and combination of white solid lubricants
Unworked penetration
280-320
Specific gravity
1.2g/cc at 20°C
Dropping point
None
Base oil viscosity
21mm2/s at 40°C
Temperature range
-40°C~+1400°C
Friction value
0.10-0.13
Degree of corrosion
1-90
Depth of wear
0.3um
Salt spray test
>500 hours
Four-ball tester(VKA)
3800/4000N
Description:
A white non-carbonized-under-high-temperature lubricating paste for lubrication of all kinds of surfaces subject to high load,
particularly operation at low speed and/or
oscillating motion
and of
steel
and
non-ferrous
metal
screw
,
plug and bayonet joints
.
Applications:
-Anti-Seizing non-destructive disassembly of threaded conncetions subject to high temperatures,
i.e. at internal combustion engines and turbines oven after long service time.
-Corrosion protection for nuts and
bolts,sockcts and spindles in refurenes, steel-and cement mills,
marine and agriculture
.
Benefits:
-Best use-
ONE single paste for MANY application
s
;
-
White-coloured
,
non-staining
,
outstanding lubricity
-
High pressure
,
low friction
and
low wear resistance
, reliable
anti-seize
effect and
corrosion protection
.
-Economical and ecological solution for many plants and shops which have been depending
on a number of special pastes so far.
-contains organic active molybdenum additive for increased performance.
Environment:
Ecology - FUKKOL H.T PASTE is non-toxic,contains no ferrous metals and is free from graphite ,
molybdenum-disulphide and sulphide additives.
Typical physical properties
FDA MOULD RELEASE AGENT FUKKOL
FDA MOULD RELEASE AGENT FUKKOL
(FOOD GRADE)
Free from so-called 'SILICONE PROBLEMS'
Got NSF H1 certification
FUKKOL MOULD RELEASE AGENT
(FOOD GRADE)
http://www.fukkol-lube.com/asp-bin/EN/?page=1
Description:
*FUKKOL MOULD RELEASEAGENT (FOOD GRADE) is an aerosol applied release agent formulated to provide a quick,
effective,non-staining release of plastics and rubber for most types of moulding process.
It is
excellent plastic and rubber mould release agent
for household
and electrical appliance industry and also
suitable for all thermal plastic
use,especially for SAN plastic resin.
In addition, it is specifically designed for products subject to subsequent processes such as printing,painting,plating,
hot stamping and bonding operation requiring being
free from so-called 'SILICONE PROBLEMS'.
Being NSF H1 certificated, it is also suitable for may-contact-food situations.
Summary of Benefits
* Ultra fine spray gives controlled application with complete coverage.
* Improved finish and reduced risk of over application.
* Reduces problems associated with marking and transfer. Highly economical, efficient release.
Only one pass required for many shots of ejection.
*
Effective and long lasting film
provides more numbers of releases than most silicone formulations.
*Low environmental impact. Contains no CFC propellant.
* Will not affect subsequent operations.
* lf necessary, fiIm can be completely removed by mild solvent like alcohol or water soluble cleaner..
Typical Data
Active ingredient, Solvent, Propellant, Modified Silicone
Oil, Hydrocarbon Solvent
, LPG
Precautions
*Pressurised container, protect from sunlight, store at
temperature below 50°C
*Do not puncture or incinerate.
*Do not spray on to naked flames.
*Inflammable
(FOOD GRADE)
Free from so-called 'SILICONE PROBLEMS'
Got NSF H1 certification
FUKKOL MOULD RELEASE AGENT
(FOOD GRADE)
http://www.fukkol-lube.com/asp-bin/EN/?page=1
Description:
*FUKKOL MOULD RELEASEAGENT (FOOD GRADE) is an aerosol applied release agent formulated to provide a quick,
effective,non-staining release of plastics and rubber for most types of moulding process.
It is
excellent plastic and rubber mould release agent
for household
and electrical appliance industry and also
suitable for all thermal plastic
use,especially for SAN plastic resin.
In addition, it is specifically designed for products subject to subsequent processes such as printing,painting,plating,
hot stamping and bonding operation requiring being
free from so-called 'SILICONE PROBLEMS'.
Being NSF H1 certificated, it is also suitable for may-contact-food situations.
Summary of Benefits
* Ultra fine spray gives controlled application with complete coverage.
* Improved finish and reduced risk of over application.
* Reduces problems associated with marking and transfer. Highly economical, efficient release.
Only one pass required for many shots of ejection.
*
Effective and long lasting film
provides more numbers of releases than most silicone formulations.
*Low environmental impact. Contains no CFC propellant.
* Will not affect subsequent operations.
* lf necessary, fiIm can be completely removed by mild solvent like alcohol or water soluble cleaner..
Typical Data
Active ingredient, Solvent, Propellant, Modified Silicone
Oil, Hydrocarbon Solvent
, LPG
Precautions
*Pressurised container, protect from sunlight, store at
temperature below 50°C
*Do not puncture or incinerate.
*Do not spray on to naked flames.
*Inflammable
FEP Heat Exchanger
FEP(fluorinated ethylene propylene) heat exchanger is also called Teflon/f46 heat exchanger.excellent chemical resistance
FEP(Fluorinated Ethylene Propylene) heat exchanger is also called Teflon/F46 heat exchanger.
FEP
is established for its excellent chemical resistance, outstanding electrical properties and a wide service temperature range extending up to 200
o
C. FEP is UV light transparent a property that is effectively utilized in water disinfecting by ultra violet light of the appropriate wavelength.
Application:
FEP(Fluorinated Ethylene Propylene)/ Teflon/ F46 is used in the chemical process for heating or cooling of high corrosive fluid etc.
Types:
There are three different types: straight-through tubes, U-type tubes and convoluted tube.
Technical index of heat exchanger
Indicator
Unit
Figure
Density
g/cm
3
2.14-2.17
Tensile Strength
Mpa
14
Elongation
%
175
Working Temperature
o
C
150
Working Pressure
Mpa
0.3
Specification of heat exchanger
Item
Heat exchange area (m
2
)
(mm) Diameter of the tube
straight-through tubes
10-60
100-500
U-type tubes
10-60
100-500
convoluted tubes
5-30
100-300
FEP(Fluorinated Ethylene Propylene) heat exchanger is also called Teflon/F46 heat exchanger.
FEP
is established for its excellent chemical resistance, outstanding electrical properties and a wide service temperature range extending up to 200
o
C. FEP is UV light transparent a property that is effectively utilized in water disinfecting by ultra violet light of the appropriate wavelength.
Application:
FEP(Fluorinated Ethylene Propylene)/ Teflon/ F46 is used in the chemical process for heating or cooling of high corrosive fluid etc.
Types:
There are three different types: straight-through tubes, U-type tubes and convoluted tube.
Technical index of heat exchanger
Indicator
Unit
Figure
Density
g/cm
3
2.14-2.17
Tensile Strength
Mpa
14
Elongation
%
175
Working Temperature
o
C
150
Working Pressure
Mpa
0.3
Specification of heat exchanger
Item
Heat exchange area (m
2
)
(mm) Diameter of the tube
straight-through tubes
10-60
100-500
U-type tubes
10-60
100-500
convoluted tubes
5-30
100-300
FEP Heat Exchanger
FEP(fluorinated ethylene propylene) heat exchanger is also called Teflon/f46 heat exchanger.excellent chemical resistance
FEP(Fluorinated Ethylene Propylene) heat exchanger is also called Teflon/F46 heat exchanger.
FEP
is established for its excellent chemical resistance, outstanding electrical properties and a wide service temperature range extending up to 200
o
C. FEP is UV light transparent a property that is effectively utilized in water disinfecting by ultra violet light of the appropriate wavelength.
Application:
FEP(Fluorinated Ethylene Propylene)/ Teflon/ F46 is used in the chemical process for heating or cooling of high corrosive fluid etc.
Types:
There are three different types: straight-through tubes, U-type tubes and convoluted tube.
Technical index of heat exchanger
Indicator
Unit
Figure
Density
g/cm
3
2.14-2.17
Tensile Strength
Mpa
14
Elongation
%
175
Working Temperature
o
C
150
Working Pressure
Mpa
0.3
Specification of heat exchanger
Item
Heat exchange area (m
2
)
(mm) Diameter of the tube
straight-through tubes
10-60
100-500
U-type tubes
10-60
100-500
convoluted tubes
5-30
100-300
FEP(Fluorinated Ethylene Propylene) heat exchanger is also called Teflon/F46 heat exchanger.
FEP
is established for its excellent chemical resistance, outstanding electrical properties and a wide service temperature range extending up to 200
o
C. FEP is UV light transparent a property that is effectively utilized in water disinfecting by ultra violet light of the appropriate wavelength.
Application:
FEP(Fluorinated Ethylene Propylene)/ Teflon/ F46 is used in the chemical process for heating or cooling of high corrosive fluid etc.
Types:
There are three different types: straight-through tubes, U-type tubes and convoluted tube.
Technical index of heat exchanger
Indicator
Unit
Figure
Density
g/cm
3
2.14-2.17
Tensile Strength
Mpa
14
Elongation
%
175
Working Temperature
o
C
150
Working Pressure
Mpa
0.3
Specification of heat exchanger
Item
Heat exchange area (m
2
)
(mm) Diameter of the tube
straight-through tubes
10-60
100-500
U-type tubes
10-60
100-500
convoluted tubes
5-30
100-300
FK-2700 Biostable Additive Emulsion Soluble Cutting Fluid
Biostable Additive Emulsion Soluble Cutting Fluid
-Inventory savings
-Improved machining performance
-High productivity
Product Information
Fukkol FK-2700 Biostable Additive Emulsion Soluble Cutting Fluid is general purpose soluble cutting fluid concentrate with mineral oil content(abuvi 60%).specifically developed for multiple operations on various types of diluent waters,it is the product of choice when grade rationalization is to be considered within larger machine shop environments.
Product Application
FK-2700 operations on various types of machine tools ,normal fluid velocities ,a wide range of diluent waters ,larger machine shops ,all normal ferrous metals ,including low order stainless steel , and so on.
Virtue
-Inventory savings
-Improved machining performance
-High productivity in difficult conditions
-Prolonged sump life Versus Soluble Oils
-Inventory savings
-Improved machining performance
-High productivity
Product Information
Fukkol FK-2700 Biostable Additive Emulsion Soluble Cutting Fluid is general purpose soluble cutting fluid concentrate with mineral oil content(abuvi 60%).specifically developed for multiple operations on various types of diluent waters,it is the product of choice when grade rationalization is to be considered within larger machine shop environments.
Product Application
FK-2700 operations on various types of machine tools ,normal fluid velocities ,a wide range of diluent waters ,larger machine shops ,all normal ferrous metals ,including low order stainless steel , and so on.
Virtue
-Inventory savings
-Improved machining performance
-High productivity in difficult conditions
-Prolonged sump life Versus Soluble Oils
FK-2700 EP Emulsion Fluid
EP Emulsion Fluid
-Inventory savings
-Improved machining performance
-High productivity
Product Information
Fukkol FK-2700 EP Emulsion Fluidis general purpose soluble cutting fluid concentrate with mineral oil content(abuvi 60%).specifically developed for multiple operations on various types of diluent waters,it is the product of choice when grade rationalization is to be considered within larger machine shop environments.
Product Application
FK-2700 operations on various types of machine tools ,normal fluid velocities ,a wide range of diluent waters ,larger machine shops ,all normal ferrous metals ,including low order stainless steel , and so on.
Virtue
-Inventory savings
-Improved machining performance
-High productivity in difficult conditions
-Prolonged sump life Versus Soluble Oils
-Inventory savings
-Improved machining performance
-High productivity
Product Information
Fukkol FK-2700 EP Emulsion Fluidis general purpose soluble cutting fluid concentrate with mineral oil content(abuvi 60%).specifically developed for multiple operations on various types of diluent waters,it is the product of choice when grade rationalization is to be considered within larger machine shop environments.
Product Application
FK-2700 operations on various types of machine tools ,normal fluid velocities ,a wide range of diluent waters ,larger machine shops ,all normal ferrous metals ,including low order stainless steel , and so on.
Virtue
-Inventory savings
-Improved machining performance
-High productivity in difficult conditions
-Prolonged sump life Versus Soluble Oils
FK-2700 EP Emulsion Soluble Cutting Fluid
EP Emulsion Soluble Cutting Fluid
-Inventory savings
-Improved machining performance
-High productivity
Product Information
Fukkol FK-2700 EP Emulsion Soluble Cutting Fluid is general purpose soluble cutting fluid concentrate with mineral oil content(abuvi 60%).specifically developed for multiple operations on various types of diluent waters,it is the product of choice when grade rationalization is to be considered within larger machine shop environments.
Product Application
FK-2700 operations on various types of machine tools ,normal fluid velocities ,a wide range of diluent waters ,larger machine shops ,all normal ferrous metals ,including low order stainless steel , and so on.
Virtue
-Inventory savings
-Improved machining performance
-High productivity in difficult conditions
-Prolonged sump life Versus Soluble Oils
-Inventory savings
-Improved machining performance
-High productivity
Product Information
Fukkol FK-2700 EP Emulsion Soluble Cutting Fluid is general purpose soluble cutting fluid concentrate with mineral oil content(abuvi 60%).specifically developed for multiple operations on various types of diluent waters,it is the product of choice when grade rationalization is to be considered within larger machine shop environments.
Product Application
FK-2700 operations on various types of machine tools ,normal fluid velocities ,a wide range of diluent waters ,larger machine shops ,all normal ferrous metals ,including low order stainless steel , and so on.
Virtue
-Inventory savings
-Improved machining performance
-High productivity in difficult conditions
-Prolonged sump life Versus Soluble Oils
FK-2700 Emulsion Cutting Fluid
Emulsion Cutting Fluid
-Inventory savings
-Improved machining performance
-High productivity in difficult conditions
Product Information
Fukkol FK-2700 Emulsion Cutting Fluid is general purpose soluble cutting fluid concentrate with mineral oil content(abuvi 60%).specifically developed for multiple operations on various types of diluent waters,it is the product of choice when grade rationalization is to be considered within larger machine shop environments.
Product Application
FK-2700 operations on various types of machine tools ,normal fluid velocities ,a wide range of diluent waters ,larger machine shops ,all normal ferrous metals ,including low order stainless steel , and so on.
Virtue
-Inventory savings
-Improved machining performance
-High productivity in difficult conditions
-Prolonged sump life Versus Soluble Oils
-Inventory savings
-Improved machining performance
-High productivity in difficult conditions
Product Information
Fukkol FK-2700 Emulsion Cutting Fluid is general purpose soluble cutting fluid concentrate with mineral oil content(abuvi 60%).specifically developed for multiple operations on various types of diluent waters,it is the product of choice when grade rationalization is to be considered within larger machine shop environments.
Product Application
FK-2700 operations on various types of machine tools ,normal fluid velocities ,a wide range of diluent waters ,larger machine shops ,all normal ferrous metals ,including low order stainless steel , and so on.
Virtue
-Inventory savings
-Improved machining performance
-High productivity in difficult conditions
-Prolonged sump life Versus Soluble Oils
FK-3700 Biostable Semi-synthetic Soluble Cutting Fluid
Biostable Semi-synthetic Soluble Cutting Fluid
-Inventory savings
-Improve machining performance
-High productivity
Product Information
Fukkol FK-3700 Biostable Semi-synthetic Soluble Cutting Fluid is general purpose,biostable,sem i-synthetic cutting fluid concentrate with mineral oil content(> 40%).specifically developed for multiple operations on various types of diluent waters,it is the product of choice when grade rationalization is to be considered within larger machine shop environments.
Product Application
FK-3700 operations on various types of machine tools ,normal fluid velocities ,a wide range of diluent waters ,larger machine shops ,all normal ferrous metals ,including low order stainless steel , and so on.
Virtue
-Inventory savings
-Improve machining performance
-High productivity in difficult conditions
-Prolong sump life Versus Soluble Oils
-Inventory savings
-Improve machining performance
-High productivity
Product Information
Fukkol FK-3700 Biostable Semi-synthetic Soluble Cutting Fluid is general purpose,biostable,sem i-synthetic cutting fluid concentrate with mineral oil content(> 40%).specifically developed for multiple operations on various types of diluent waters,it is the product of choice when grade rationalization is to be considered within larger machine shop environments.
Product Application
FK-3700 operations on various types of machine tools ,normal fluid velocities ,a wide range of diluent waters ,larger machine shops ,all normal ferrous metals ,including low order stainless steel , and so on.
Virtue
-Inventory savings
-Improve machining performance
-High productivity in difficult conditions
-Prolong sump life Versus Soluble Oils
FK-3700 General Purpose Semi-synthetic Cutting Fluid
General Purpose Semi-synthetic Cutting Fluid
-Inventory savings
-Improve machining performance
Product Information
Fukkol FK-3700 General Purpose Semi-synthetic Cutting Fluid is general purpose,biostable,sem i-synthetic cutting fluid concentrate with mineral oil content(> 40%).specifically developed for multiple operations on various types of diluent waters,it is the product of choice when grade rationalization is to be considered within larger machine shop environments.
Product Application
FK-3700 operations on various types of machine tools ,normal fluid velocities ,a wide range of diluent waters ,larger machine shops ,all normal ferrous metals ,including low order stainless steel , and so on.
Virtue
-Inventory savings
-Improve machining performance
-High productivity in difficult conditions
-Prolong sump life Versus Soluble Oils
-Inventory savings
-Improve machining performance
Product Information
Fukkol FK-3700 General Purpose Semi-synthetic Cutting Fluid is general purpose,biostable,sem i-synthetic cutting fluid concentrate with mineral oil content(> 40%).specifically developed for multiple operations on various types of diluent waters,it is the product of choice when grade rationalization is to be considered within larger machine shop environments.
Product Application
FK-3700 operations on various types of machine tools ,normal fluid velocities ,a wide range of diluent waters ,larger machine shops ,all normal ferrous metals ,including low order stainless steel , and so on.
Virtue
-Inventory savings
-Improve machining performance
-High productivity in difficult conditions
-Prolong sump life Versus Soluble Oils
3-In-1 PET bottle pure water filling machine
3-In-1 PET bottle pure water filling machine
CSD filling machine
Material:stainless steel
Max capacity: 36000BPH
The series of machine are the integrated rinsing, filling and capping machine, suitable for filling various PET bottled carbonated beverages.
1. Bottles are transported with neck clipped in the filling monoblock, which features1Bottles with same and nearly same diameter can be changed easily with no need to adjust equipments. Even when bottles change a bit in diameter, you only need quite short time to change starwheels of bottle-block parts. This improvement helps the customer to ease operation and save time.2Be able to avoid second pollution from rubber clamp.
2. Bottle infeed by combination of infeed screw and infeed starwheel. Equipped with bottle jam protection device.
3. The high efficiency atomizing spray nozzle installed on bottle clamp is capable of cleaning any part of bottle inner wall, and also saves rinsing water.
4. Adopt ring cylinder and equip CIP(SIP) cycling channel; high accurate and speed level favles are reasonably structured with accurate filling.
5. Use ZALKIN capping technology and magnetic contortion variation device to ensure stable and reliable capping quality which is suitable to high speed production line.
6. The height of bottle outfeeding conveyor does not need to be adjusted when changing bottle shape.
Technical parameter
Model
JSF14-12-5
JSF18-18-6
JSF24-24-8
JSF32-32-10
Production capacity(500ml) (bph)
3000
6000
10000
14000
Filling precision
>±5mm(Liquid Level)
Polyester bottle standard(mm)
Bottle diameter: 50-100 Bottle Height: 150-320
Suitable cap sharp
Plastic screw cap
Water pressure of washing bottle(Mpa)
0.18-0.25
Water consumption of washing bottle(kg/h)
1300
2000
3000
4000
Spraying position
5
7
12
20
Dripping position
2.5
3.5
7
14
Air source pressure(Mpa)
0.6
Air consumption(m3/min)
0.3
0.4
0.5
0.6
Power (kw)
5.03
6.57
8.07
10.07
Weight (kg)
3000
4000
5000
6000
Size(mm)
2400×1650×2500
2640×1800×2500
3000×2000×3150
3600×2800×3150
CSD filling machine
Material:stainless steel
Max capacity: 36000BPH
The series of machine are the integrated rinsing, filling and capping machine, suitable for filling various PET bottled carbonated beverages.
1. Bottles are transported with neck clipped in the filling monoblock, which features1Bottles with same and nearly same diameter can be changed easily with no need to adjust equipments. Even when bottles change a bit in diameter, you only need quite short time to change starwheels of bottle-block parts. This improvement helps the customer to ease operation and save time.2Be able to avoid second pollution from rubber clamp.
2. Bottle infeed by combination of infeed screw and infeed starwheel. Equipped with bottle jam protection device.
3. The high efficiency atomizing spray nozzle installed on bottle clamp is capable of cleaning any part of bottle inner wall, and also saves rinsing water.
4. Adopt ring cylinder and equip CIP(SIP) cycling channel; high accurate and speed level favles are reasonably structured with accurate filling.
5. Use ZALKIN capping technology and magnetic contortion variation device to ensure stable and reliable capping quality which is suitable to high speed production line.
6. The height of bottle outfeeding conveyor does not need to be adjusted when changing bottle shape.
Technical parameter
Model
JSF14-12-5
JSF18-18-6
JSF24-24-8
JSF32-32-10
Production capacity(500ml) (bph)
3000
6000
10000
14000
Filling precision
>±5mm(Liquid Level)
Polyester bottle standard(mm)
Bottle diameter: 50-100 Bottle Height: 150-320
Suitable cap sharp
Plastic screw cap
Water pressure of washing bottle(Mpa)
0.18-0.25
Water consumption of washing bottle(kg/h)
1300
2000
3000
4000
Spraying position
5
7
12
20
Dripping position
2.5
3.5
7
14
Air source pressure(Mpa)
0.6
Air consumption(m3/min)
0.3
0.4
0.5
0.6
Power (kw)
5.03
6.57
8.07
10.07
Weight (kg)
3000
4000
5000
6000
Size(mm)
2400×1650×2500
2640×1800×2500
3000×2000×3150
3600×2800×3150
FK-3700 High Mineral Oil CNC Soluble Cutting Fluid
High Mineral Oil CNC Soluble Cutting Fluid
-Inventory savings
-Improve machining performance
-High productivity
Product Information
Fukkol FK-3700 High Mineral Oil CNC Soluble Cutting Fluid is general purpose,biostable,sem i-synthetic cutting fluid concentrate with mineral oil content(> 40%).specifically developed for multiple operations on various types of diluent waters,it is the product of choice when grade rationalization is to be considered within larger machine shop environments.
Product Application
FK-3700 operations on various types of machine tools ,normal fluid velocities ,a wide range of diluent waters ,larger machine shops ,all normal ferrous metals ,including low order stainless steel , and so on.
Virtue
-Inventory savings
-Improve machining performance
-High productivity in difficult conditions
-Prolong sump life Versus Soluble Oils
-Inventory savings
-Improve machining performance
-High productivity
Product Information
Fukkol FK-3700 High Mineral Oil CNC Soluble Cutting Fluid is general purpose,biostable,sem i-synthetic cutting fluid concentrate with mineral oil content(> 40%).specifically developed for multiple operations on various types of diluent waters,it is the product of choice when grade rationalization is to be considered within larger machine shop environments.
Product Application
FK-3700 operations on various types of machine tools ,normal fluid velocities ,a wide range of diluent waters ,larger machine shops ,all normal ferrous metals ,including low order stainless steel , and so on.
Virtue
-Inventory savings
-Improve machining performance
-High productivity in difficult conditions
-Prolong sump life Versus Soluble Oils
FK-3700 Semi-synthetic Cutting Fluid For All Normal Ferrous Metals
Semi-synthetic Cutting Fluid For All Normal Ferrous Metals
-Inventory savings
-Improve machining performance
Product Information
Fukkol FK-3700 Semi-synthetic Cutting Fluid For All Normal Ferrous Metals is general purpose,biostable,sem i-synthetic cutting fluid concentrate with mineral oil content(> 40%).specifically developed for multiple operations on various types of diluent waters,it is the product of choice when grade rationalization is to be considered within larger machine shop environments.
Product Application
FK-3700 operations on various types of machine tools ,normal fluid velocities ,a wide range of diluent waters ,larger machine shops ,all normal ferrous metals ,including low order stainless steel , and so on.
Virtue
-Inventory savings
-Improve machining performance
-High productivity in difficult conditions
-Prolong sump life Versus Soluble Oils
-Inventory savings
-Improve machining performance
Product Information
Fukkol FK-3700 Semi-synthetic Cutting Fluid For All Normal Ferrous Metals is general purpose,biostable,sem i-synthetic cutting fluid concentrate with mineral oil content(> 40%).specifically developed for multiple operations on various types of diluent waters,it is the product of choice when grade rationalization is to be considered within larger machine shop environments.
Product Application
FK-3700 operations on various types of machine tools ,normal fluid velocities ,a wide range of diluent waters ,larger machine shops ,all normal ferrous metals ,including low order stainless steel , and so on.
Virtue
-Inventory savings
-Improve machining performance
-High productivity in difficult conditions
-Prolong sump life Versus Soluble Oils
FK-3700 Semi-synthetic Cutting Fluid For Large Machine Processing Workshop
Semi-synthetic Cutting Fluid For Large Machine Processing Workshop
-Inventory savings
-Improve machining performance
Product Information
Fukkol FK-3700 Semi-synthetic Cutting Fluid For Large Machine Processing Workshop is general purpose,biostable,sem i-synthetic cutting fluid concentrate with mineral oil content(> 40%).specifically developed for multiple operations on various types of diluent waters,it is the product of choice when grade rationalization is to be considered within larger machine shop environments.
Product Application
FK-3700 operations on various types of machine tools ,normal fluid velocities ,a wide range of diluent waters ,larger machine shops ,all normal ferrous metals ,including low order stainless steel , and so on.
Virtue
-Inventory savings
-Improve machining performance
-High productivity in difficult conditions
-Prolong sump life Versus Soluble Oils
-Inventory savings
-Improve machining performance
Product Information
Fukkol FK-3700 Semi-synthetic Cutting Fluid For Large Machine Processing Workshop is general purpose,biostable,sem i-synthetic cutting fluid concentrate with mineral oil content(> 40%).specifically developed for multiple operations on various types of diluent waters,it is the product of choice when grade rationalization is to be considered within larger machine shop environments.
Product Application
FK-3700 operations on various types of machine tools ,normal fluid velocities ,a wide range of diluent waters ,larger machine shops ,all normal ferrous metals ,including low order stainless steel , and so on.
Virtue
-Inventory savings
-Improve machining performance
-High productivity in difficult conditions
-Prolong sump life Versus Soluble Oils
FK-3700 semi-synthetic fIuld
-Inventory savings
-Improve machining performance
-High productivity in difficult conditions
-Prolong sump life
Product Information
Fukkol FK-3700 is general purpose,biostable,sem i-synthetic cutting fluid concentrate with mineral oil content(> 40%).specifically developed for multiple operations on various types of diluent waters,it is the product of choice when grade rationalization is to be considered within larger machine shop environments.
Product Application
FK-3700 operations on various types of machine tools ,normal fluid velocities ,a wide range of diluent waters ,larger machine shops ,all normal ferrous metals ,including low order stainless steel , and so on.
Virtue
-Inventory savings
-Improve machining performance
-High productivity in difficult conditions
-Prolong sump life Versus Soluble Oils
-Improve machining performance
-High productivity in difficult conditions
-Prolong sump life
Product Information
Fukkol FK-3700 is general purpose,biostable,sem i-synthetic cutting fluid concentrate with mineral oil content(> 40%).specifically developed for multiple operations on various types of diluent waters,it is the product of choice when grade rationalization is to be considered within larger machine shop environments.
Product Application
FK-3700 operations on various types of machine tools ,normal fluid velocities ,a wide range of diluent waters ,larger machine shops ,all normal ferrous metals ,including low order stainless steel , and so on.
Virtue
-Inventory savings
-Improve machining performance
-High productivity in difficult conditions
-Prolong sump life Versus Soluble Oils
FL-888 Fluorescence Green Semi-synthetic Soluble Cutting Fiuld
Fluorescence Green Semi-synthetic Soluble Cutting Fiuld
-Maximum machining efficiency.
-Superior surface finish to other oil
Product Information
Fukkol FL-888 Fluorescence Green Semi-synthetic Soluble Cutting Fiuld is biostable, semi-synthetic cutting concentrate specially formulated with high levels of lubricity for use with aluminium and its alloys in the most arduous modem machining operations, using a wide range of diluent waters. Combines the advantages of the new bistable technology, and its inherent resistance to bacteria, with the traditional values of an oil-based, high lubricity cutting fluid.
Product Application
*Specially formulated for use with aluminium and its alloys in modem machining applications .
*Particularly suitable for operations such as tapping small diameter holes in the softer alloys.
*Recommended for use when conventional fluids have proved to be incapable of proved to be incapable of providing the required machining performance, tool life or surface finish.
*Heavy-duty machining of softer materials such as aluminium and its alloys.
*Particularly suitable for softer, lower silicon alloys of aluminium.
*General machining of copper and its alloys, including high strength copper alloys.
Virtue
-Maximum machining efficiency.
-Superior surface finish to other oils.
-Non-staining to aluminium.
-Prolonged sump life versus soluble oils.
-Maximum machining efficiency.
-Superior surface finish to other oil
Product Information
Fukkol FL-888 Fluorescence Green Semi-synthetic Soluble Cutting Fiuld is biostable, semi-synthetic cutting concentrate specially formulated with high levels of lubricity for use with aluminium and its alloys in the most arduous modem machining operations, using a wide range of diluent waters. Combines the advantages of the new bistable technology, and its inherent resistance to bacteria, with the traditional values of an oil-based, high lubricity cutting fluid.
Product Application
*Specially formulated for use with aluminium and its alloys in modem machining applications .
*Particularly suitable for operations such as tapping small diameter holes in the softer alloys.
*Recommended for use when conventional fluids have proved to be incapable of proved to be incapable of providing the required machining performance, tool life or surface finish.
*Heavy-duty machining of softer materials such as aluminium and its alloys.
*Particularly suitable for softer, lower silicon alloys of aluminium.
*General machining of copper and its alloys, including high strength copper alloys.
Virtue
-Maximum machining efficiency.
-Superior surface finish to other oils.
-Non-staining to aluminium.
-Prolonged sump life versus soluble oils.
FL-888 High Purity Semi-synthetic Cutting Fiuld
High Purity Semi-synthetic Cutting Fiuld
-Maximum machining efficiency.
-Superior surface finish
Product Information
Fukkol FL-888 High Purity Semi-synthetic Cutting Fiuld is biostable, semi-synthetic cutting concentrate specially formulated with high levels of lubricity for use with aluminium and its alloys in the most arduous modem machining operations, using a wide range of diluent waters. Combines the advantages of the new bistable technology, and its inherent resistance to bacteria, with the traditional values of an oil-based, high lubricity cutting fluid.
Product Application
*Specially formulated for use with aluminium and its alloys in modem machining applications .
*Particularly suitable for operations such as tapping small diameter holes in the softer alloys.
*Recommended for use when conventional fluids have proved to be incapable of proved to be incapable of providing the required machining performance, tool life or surface finish.
*Heavy-duty machining of softer materials such as aluminium and its alloys.
*Particularly suitable for softer, lower silicon alloys of aluminium.
*General machining of copper and its alloys, including high strength copper alloys.
Virtue
-Maximum machining efficiency.
-Superior surface finish to other oils.
-Non-staining to aluminium.
-Prolonged sump life versus soluble oils.
-Maximum machining efficiency.
-Superior surface finish
Product Information
Fukkol FL-888 High Purity Semi-synthetic Cutting Fiuld is biostable, semi-synthetic cutting concentrate specially formulated with high levels of lubricity for use with aluminium and its alloys in the most arduous modem machining operations, using a wide range of diluent waters. Combines the advantages of the new bistable technology, and its inherent resistance to bacteria, with the traditional values of an oil-based, high lubricity cutting fluid.
Product Application
*Specially formulated for use with aluminium and its alloys in modem machining applications .
*Particularly suitable for operations such as tapping small diameter holes in the softer alloys.
*Recommended for use when conventional fluids have proved to be incapable of proved to be incapable of providing the required machining performance, tool life or surface finish.
*Heavy-duty machining of softer materials such as aluminium and its alloys.
*Particularly suitable for softer, lower silicon alloys of aluminium.
*General machining of copper and its alloys, including high strength copper alloys.
Virtue
-Maximum machining efficiency.
-Superior surface finish to other oils.
-Non-staining to aluminium.
-Prolonged sump life versus soluble oils.
FL-888 Semi-synthetic Soluble Cutting Fiuld For Alumnium and Alumnium Alloys
Soluble Cutting Fiuld For Alumnium and Alumnium Alloys
-Maximum machining efficiency.
-Superior surface finish
Product Information
Fukkol FL-888 Soluble Cutting Fiuld For Alumnium and Alumnium Alloys is biostable, semi-synthetic cutting concentrate specially formulated with high levels of lubricity for use with aluminium and its alloys in the most arduous modem machining operations, using a wide range of diluent waters. Combines the advantages of the new bistable technology, and its inherent resistance to bacteria, with the traditional values of an oil-based, high lubricity cutting fluid.
Product Application
*Specially formulated for use with aluminium and its alloys in modem machining applications .
*Particularly suitable for operations such as tapping small diameter holes in the softer alloys.
*Recommended for use when conventional fluids have proved to be incapable of proved to be incapable of providing the required machining performance, tool life or surface finish.
*Heavy-duty machining of softer materials such as aluminium and its alloys.
*Particularly suitable for softer, lower silicon alloys of aluminium.
*General machining of copper and its alloys, including high strength copper alloys.
Virtue
-Maximum machining efficiency.
-Superior surface finish to other oils.
-Non-staining to aluminium.
-Prolonged sump life versus soluble oils.
-Maximum machining efficiency.
-Superior surface finish
Product Information
Fukkol FL-888 Soluble Cutting Fiuld For Alumnium and Alumnium Alloys is biostable, semi-synthetic cutting concentrate specially formulated with high levels of lubricity for use with aluminium and its alloys in the most arduous modem machining operations, using a wide range of diluent waters. Combines the advantages of the new bistable technology, and its inherent resistance to bacteria, with the traditional values of an oil-based, high lubricity cutting fluid.
Product Application
*Specially formulated for use with aluminium and its alloys in modem machining applications .
*Particularly suitable for operations such as tapping small diameter holes in the softer alloys.
*Recommended for use when conventional fluids have proved to be incapable of proved to be incapable of providing the required machining performance, tool life or surface finish.
*Heavy-duty machining of softer materials such as aluminium and its alloys.
*Particularly suitable for softer, lower silicon alloys of aluminium.
*General machining of copper and its alloys, including high strength copper alloys.
Virtue
-Maximum machining efficiency.
-Superior surface finish to other oils.
-Non-staining to aluminium.
-Prolonged sump life versus soluble oils.
Thursday, October 13, 2011
FL-888 Semi-synthetic Soluble Cutting Fiuld For Modern Stainsteel
Semi-synthetic Soluble Cutting Fiuld For Modern Stainsteel
-Maximum machining efficiency.
-Superior surface finish
Product Information
Fukkol FL-888 Semi-synthetic Soluble Cutting Fiuld For Modern Stainsteel is biostable, semi-synthetic cutting concentrate specially formulated with high levels of lubricity for use with aluminium and its alloys in the most arduous modem machining operations, using a wide range of diluent waters. Combines the advantages of the new bistable technology, and its inherent resistance to bacteria, with the traditional values of an oil-based, high lubricity cutting fluid.
Product Application
*Specially formulated for use with aluminium and its alloys in modem machining applications .
*Particularly suitable for operations such as tapping small diameter holes in the softer alloys.
*Recommended for use when conventional fluids have proved to be incapable of proved to be incapable of providing the required machining performance, tool life or surface finish.
*Heavy-duty machining of softer materials such as aluminium and its alloys.
*Particularly suitable for softer, lower silicon alloys of aluminium.
*General machining of copper and its alloys, including high strength copper alloys.
Virtue
-Maximum machining efficiency.
-Superior surface finish to other oils.
-Non-staining to aluminium.
-Prolonged sump life versus soluble oils.
-Maximum machining efficiency.
-Superior surface finish
Product Information
Fukkol FL-888 Semi-synthetic Soluble Cutting Fiuld For Modern Stainsteel is biostable, semi-synthetic cutting concentrate specially formulated with high levels of lubricity for use with aluminium and its alloys in the most arduous modem machining operations, using a wide range of diluent waters. Combines the advantages of the new bistable technology, and its inherent resistance to bacteria, with the traditional values of an oil-based, high lubricity cutting fluid.
Product Application
*Specially formulated for use with aluminium and its alloys in modem machining applications .
*Particularly suitable for operations such as tapping small diameter holes in the softer alloys.
*Recommended for use when conventional fluids have proved to be incapable of proved to be incapable of providing the required machining performance, tool life or surface finish.
*Heavy-duty machining of softer materials such as aluminium and its alloys.
*Particularly suitable for softer, lower silicon alloys of aluminium.
*General machining of copper and its alloys, including high strength copper alloys.
Virtue
-Maximum machining efficiency.
-Superior surface finish to other oils.
-Non-staining to aluminium.
-Prolonged sump life versus soluble oils.
FL-888 Stainsteel Semi-synthetic Soluble Cutting Fiuld
Stainsteel Semi-synthetic Soluble Cutting Fiuld
-Maximum machining efficiency.
-Superior surface finish to other oils.
Product Information
Fukkol FL-888 Stainsteel Semi-synthetic Soluble Cutting Fiuld is biostable, semi-synthetic cutting concentrate specially formulated with high levels of lubricity for use with aluminium and its alloys in the most arduous modem machining operations, using a wide range of diluent waters. Combines the advantages of the new bistable technology, and its inherent resistance to bacteria, with the traditional values of an oil-based, high lubricity cutting fluid.
Product Application
*Specially formulated for use with aluminium and its alloys in modem machining applications .
*Particularly suitable for operations such as tapping small diameter holes in the softer alloys.
*Recommended for use when conventional fluids have proved to be incapable of proved to be incapable of providing the required machining performance, tool life or surface finish.
*Heavy-duty machining of softer materials such as aluminium and its alloys.
*Particularly suitable for softer, lower silicon alloys of aluminium.
*General machining of copper and its alloys, including high strength copper alloys.
Virtue
-Maximum machining efficiency.
-Superior surface finish to other oils.
-Non-staining to aluminium.
-Prolonged sump life versus soluble oils.
-Maximum machining efficiency.
-Superior surface finish to other oils.
Product Information
Fukkol FL-888 Stainsteel Semi-synthetic Soluble Cutting Fiuld is biostable, semi-synthetic cutting concentrate specially formulated with high levels of lubricity for use with aluminium and its alloys in the most arduous modem machining operations, using a wide range of diluent waters. Combines the advantages of the new bistable technology, and its inherent resistance to bacteria, with the traditional values of an oil-based, high lubricity cutting fluid.
Product Application
*Specially formulated for use with aluminium and its alloys in modem machining applications .
*Particularly suitable for operations such as tapping small diameter holes in the softer alloys.
*Recommended for use when conventional fluids have proved to be incapable of proved to be incapable of providing the required machining performance, tool life or surface finish.
*Heavy-duty machining of softer materials such as aluminium and its alloys.
*Particularly suitable for softer, lower silicon alloys of aluminium.
*General machining of copper and its alloys, including high strength copper alloys.
Virtue
-Maximum machining efficiency.
-Superior surface finish to other oils.
-Non-staining to aluminium.
-Prolonged sump life versus soluble oils.
FL-888 Semi-synthetic Cutting Fiuld
Semi-synthetic Cutting Fiuld
-Maximum machining efficiency.
-Superior surface finish to other oils.
Product Information
Fukkol FL-888 Semi-synthetic Cutting Fiuld is bistable, semi-synthetic cutting concentrate specially formulated with high levels of lubricity for use with aluminium and its alloys in the most arduous modem machining operations, using a wide range of diluent waters. Combines the advantages of the new bistable technology, and its inherent resistance to bacteria, with the traditional values of an oil-based, high lubricity cutting fluid.
Product Application
*Specially formulated for use with aluminium and its alloys in modem machining applications .
*Particularly suitable for operations such as tapping small diameter holes in the softer alloys.
*Recommended for use when conventional fluids have proved to be incapable of proved to be incapable of providing the required machining performance, tool life or surface finish.
*Heavy-duty machining of softer materials such as aluminium and its alloys.
*Particularly suitable for softer, lower silicon alloys of aluminium.
*General machining of copper and its alloys, including high strength copper alloys.
Virtue
-Maximum machining efficiency.
-Superior surface finish to other oils.
-Non-staining to aluminium.
-Prolonged sump life versus soluble oils.
-Maximum machining efficiency.
-Superior surface finish to other oils.
Product Information
Fukkol FL-888 Semi-synthetic Cutting Fiuld is bistable, semi-synthetic cutting concentrate specially formulated with high levels of lubricity for use with aluminium and its alloys in the most arduous modem machining operations, using a wide range of diluent waters. Combines the advantages of the new bistable technology, and its inherent resistance to bacteria, with the traditional values of an oil-based, high lubricity cutting fluid.
Product Application
*Specially formulated for use with aluminium and its alloys in modem machining applications .
*Particularly suitable for operations such as tapping small diameter holes in the softer alloys.
*Recommended for use when conventional fluids have proved to be incapable of proved to be incapable of providing the required machining performance, tool life or surface finish.
*Heavy-duty machining of softer materials such as aluminium and its alloys.
*Particularly suitable for softer, lower silicon alloys of aluminium.
*General machining of copper and its alloys, including high strength copper alloys.
Virtue
-Maximum machining efficiency.
-Superior surface finish to other oils.
-Non-staining to aluminium.
-Prolonged sump life versus soluble oils.
3-In-1 PET bottle pure water filling machine
3-In-1 PET bottle pure water filling machine
CSD filling machine
Material:stainless steel
Max capacity: 36000BPH
The series of machine are the integrated rinsing, filling and capping machine, suitable for filling various PET bottled carbonated beverages.
1. Bottles are transported with neck clipped in the filling monoblock, which features1Bottles with same and nearly same diameter can be changed easily with no need to adjust equipments. Even when bottles change a bit in diameter, you only need quite short time to change starwheels of bottle-block parts. This improvement helps the customer to ease operation and save time.2Be able to avoid second pollution from rubber clamp.
2. Bottle infeed by combination of infeed screw and infeed starwheel. Equipped with bottle jam protection device.
3. The high efficiency atomizing spray nozzle installed on bottle clamp is capable of cleaning any part of bottle inner wall, and also saves rinsing water.
4. Adopt ring cylinder and equip CIP(SIP) cycling channel; high accurate and speed level favles are reasonably structured with accurate filling.
5. Use ZALKIN capping technology and magnetic contortion variation device to ensure stable and reliable capping quality which is suitable to high speed production line.
6. The height of bottle outfeeding conveyor does not need to be adjusted when changing bottle shape.
Technical parameter
Model
JSF14-12-5
JSF18-18-6
JSF24-24-8
JSF32-32-10
Production capacity(500ml) (bph)
3000
6000
10000
14000
Filling precision
>±5mm(Liquid Level)
Polyester bottle standard(mm)
Bottle diameter: 50-100 Bottle Height: 150-320
Suitable cap sharp
Plastic screw cap
Water pressure of washing bottle(Mpa)
0.18-0.25
Water consumption of washing bottle(kg/h)
1300
2000
3000
4000
Spraying position
5
7
12
20
Dripping position
2.5
3.5
7
14
Air source pressure(Mpa)
0.6
Air consumption(m3/min)
0.3
0.4
0.5
0.6
Power (kw)
5.03
6.57
8.07
10.07
Weight (kg)
3000
4000
5000
6000
Size(mm)
2400×1650×2500
2640×1800×2500
3000×2000×3150
3600×2800×3150
CSD filling machine
Material:stainless steel
Max capacity: 36000BPH
The series of machine are the integrated rinsing, filling and capping machine, suitable for filling various PET bottled carbonated beverages.
1. Bottles are transported with neck clipped in the filling monoblock, which features1Bottles with same and nearly same diameter can be changed easily with no need to adjust equipments. Even when bottles change a bit in diameter, you only need quite short time to change starwheels of bottle-block parts. This improvement helps the customer to ease operation and save time.2Be able to avoid second pollution from rubber clamp.
2. Bottle infeed by combination of infeed screw and infeed starwheel. Equipped with bottle jam protection device.
3. The high efficiency atomizing spray nozzle installed on bottle clamp is capable of cleaning any part of bottle inner wall, and also saves rinsing water.
4. Adopt ring cylinder and equip CIP(SIP) cycling channel; high accurate and speed level favles are reasonably structured with accurate filling.
5. Use ZALKIN capping technology and magnetic contortion variation device to ensure stable and reliable capping quality which is suitable to high speed production line.
6. The height of bottle outfeeding conveyor does not need to be adjusted when changing bottle shape.
Technical parameter
Model
JSF14-12-5
JSF18-18-6
JSF24-24-8
JSF32-32-10
Production capacity(500ml) (bph)
3000
6000
10000
14000
Filling precision
>±5mm(Liquid Level)
Polyester bottle standard(mm)
Bottle diameter: 50-100 Bottle Height: 150-320
Suitable cap sharp
Plastic screw cap
Water pressure of washing bottle(Mpa)
0.18-0.25
Water consumption of washing bottle(kg/h)
1300
2000
3000
4000
Spraying position
5
7
12
20
Dripping position
2.5
3.5
7
14
Air source pressure(Mpa)
0.6
Air consumption(m3/min)
0.3
0.4
0.5
0.6
Power (kw)
5.03
6.57
8.07
10.07
Weight (kg)
3000
4000
5000
6000
Size(mm)
2400×1650×2500
2640×1800×2500
3000×2000×3150
3600×2800×3150
FOMTEC PLASTIC MACHINERY grease joint parts FUKKOL anti-seize compound
FOMTEC PLASTIC MACHINERY grease
1.100% settle the difficulty of dismantle nozzle
2.Withstand tempreture of -4
FUKKOL ANTI-SEIZE COPPER COMPOUND
http://www.fukkol-lube.com/asp-bin/EN/?page=1
Application
For use when assembling components which are not resistant to corrosion or oxidation and are subsequently difficult to dismantle.
The grease is effective on any mechanism or component which is subject to corrosion such as those in contact with sea water and also in the mechanical brake linkages of vehicles.
The grease is
developed for engine exhaust
manifold nuts which
frequently
seize due to high temperatures.
Perpormance characteristucs
Will ease
disassembly of threaded components
in wet and humid environments, e.g. bolts, nuts and brake linkages.
Can be used to prevent thread stripping on exhaust manifold nuts and other high temperature applications.
Effective at
temperatures
from
-40°C to 1100°C
.
Typical physical properties
Typical characteristics
Units
Anti-seize copper
Colour
-----------
Coppery
appearance
-----------
Smooth
NLGI classification
Grade
1~2
Thickener
——
Clay
Viscosity of base oil at 40°C
mm2/s
154
Drop point
°C
Infusible
1.100% settle the difficulty of dismantle nozzle
2.Withstand tempreture of -4
FUKKOL ANTI-SEIZE COPPER COMPOUND
http://www.fukkol-lube.com/asp-bin/EN/?page=1
Application
For use when assembling components which are not resistant to corrosion or oxidation and are subsequently difficult to dismantle.
The grease is effective on any mechanism or component which is subject to corrosion such as those in contact with sea water and also in the mechanical brake linkages of vehicles.
The grease is
developed for engine exhaust
manifold nuts which
frequently
seize due to high temperatures.
Perpormance characteristucs
Will ease
disassembly of threaded components
in wet and humid environments, e.g. bolts, nuts and brake linkages.
Can be used to prevent thread stripping on exhaust manifold nuts and other high temperature applications.
Effective at
temperatures
from
-40°C to 1100°C
.
Typical physical properties
Typical characteristics
Units
Anti-seize copper
Colour
-----------
Coppery
appearance
-----------
Smooth
NLGI classification
Grade
1~2
Thickener
——
Clay
Viscosity of base oil at 40°C
mm2/s
154
Drop point
°C
Infusible
FOOD GRADE MOULD RELEASE AGENT
FUKKOL MOULD RELEASE AGENT
(FOOD GRADE)
Free from so-called 'SILICONE PROBLEMS'
Got NSF H1 certification
FUKKOL MOULD RELEASE AGENT
(FOOD GRADE)
http://www.fukkol-lube.com/asp-bin/EN/?page=1
Description:
*FUKKOL MOULD RELEASEAGENT (FOOD GRADE) is an aerosol applied release agent formulated to provide a quick,
effective,non-staining release of plastics and rubber for most types of moulding process.
It is
excellent plastic and rubber mould release agent
for household
and electrical appliance industry and also
suitable for all thermal plastic
use,especially for SAN plastic resin.
In addition, it is specifically designed for products subject to subsequent processes such as printing,painting,plating,
hot stamping and bonding operation requiring being
free from so-called 'SILICONE PROBLEMS'.
Being NSF H1 certificated, it is also suitable for may-contact-food situations.
Summary of Benefits
* Ultra fine spray gives controlled application with complete coverage.
* Improved finish and reduced risk of over application.
* Reduces problems associated with marking and transfer. Highly economical, efficient release.
Only one pass required for many shots of ejection.
*
Effective and long lasting film
provides more numbers of releases than most silicone formulations.
*Low environmental impact. Contains no CFC propellant.
* Will not affect subsequent operations.
* lf necessary, fiIm can be completely removed by mild solvent like alcohol or water soluble cleaner..
Typical Data
Active ingredient, Solvent, Propellant, Modified Silicone
Oil, Hydrocarbon Solvent
, LPG
Precautions
*Pressurised container, protect from sunlight, store at
temperature below 50°C
*Do not puncture or incinerate.
*Do not spray on to naked flames.
*Inflammable
(FOOD GRADE)
Free from so-called 'SILICONE PROBLEMS'
Got NSF H1 certification
FUKKOL MOULD RELEASE AGENT
(FOOD GRADE)
http://www.fukkol-lube.com/asp-bin/EN/?page=1
Description:
*FUKKOL MOULD RELEASEAGENT (FOOD GRADE) is an aerosol applied release agent formulated to provide a quick,
effective,non-staining release of plastics and rubber for most types of moulding process.
It is
excellent plastic and rubber mould release agent
for household
and electrical appliance industry and also
suitable for all thermal plastic
use,especially for SAN plastic resin.
In addition, it is specifically designed for products subject to subsequent processes such as printing,painting,plating,
hot stamping and bonding operation requiring being
free from so-called 'SILICONE PROBLEMS'.
Being NSF H1 certificated, it is also suitable for may-contact-food situations.
Summary of Benefits
* Ultra fine spray gives controlled application with complete coverage.
* Improved finish and reduced risk of over application.
* Reduces problems associated with marking and transfer. Highly economical, efficient release.
Only one pass required for many shots of ejection.
*
Effective and long lasting film
provides more numbers of releases than most silicone formulations.
*Low environmental impact. Contains no CFC propellant.
* Will not affect subsequent operations.
* lf necessary, fiIm can be completely removed by mild solvent like alcohol or water soluble cleaner..
Typical Data
Active ingredient, Solvent, Propellant, Modified Silicone
Oil, Hydrocarbon Solvent
, LPG
Precautions
*Pressurised container, protect from sunlight, store at
temperature below 50°C
*Do not puncture or incinerate.
*Do not spray on to naked flames.
*Inflammable
FRACTURING PROPPANT
High crushing strength
Superior thermal stability
High conductivity
Passed authentications of ISO9001:2008 ; API
Xinmi Wanli Industry Development Co., LTD isone of China's leading companies who has owned patent technology in producing and exporting ceramic proppants used in the hydraulic fracturing process to increase the productivity of oil and gas wells.
1. Brand Name: Wanli
2. Type: Fracturing Ceramic Proppant
3. Place of Origin: Henan, China (Mainland)
4. Application: Oil & Gas Mining
5. Material: Alumina Ceramic
6. Density: Light-weight, Medium Density, High Density
7. Standards: SY/T5108-2006, SY/T6302-1997
8. Authentications: ISO9001:2008
9. Test Reports: Stim-Lab test report, Frac Tech laboratories test report, Ceramic Proppant Evaluation Lab in Langfang Branch of PetroChina
10. Modo Number: 20-40, 30-50, 40-70, etc
11. We can also produc ceramic proppants of different specifications according to clients' particular requirements.
The ceramic proppant that are produced by Xinmi Wanli Industry Development Co., LTD is the necessities in oil (gas) hydraulic fracturing technology development and mining, and it plays a tremendous role in the increasing production in oil (gas) field.
Fracturing proppant can be widely used in hydraulic fracturing Wells, high-pressure oil layer fracturing. Base on high quality of Bauxite which are well grinding, mixed with various additive, then refined, granulation. According to the testing of Stim-Lab, Frac Tech Laboratory and Reservoir Stimulation Laboratory of RIPED-Langfang PetroChina, our products are all reached the standard of SY/T5108-2006, SY/T6302-1997, in the leading position of this industry.
Product categories:
By compression strength: 52MPa (7500psi), 69MPa (10000psi), 86MPa (12500psi), 103MPa (15000psi)
By volume density: low-density, medium-density and high-density.
By specification: 6-12 mesh, 8-16 mesh, 12-18 mesh, 12-20 mesh, 16-20 mesh, 16-30 mesh, 20-40 mesh, 30-50 mesh, 30-60 mesh, 40-60 mesh, 40-70 mesh, 70-140 mesh, etc.
Ceramic proppants of different specifications according to clients' specific requirements.
Superior thermal stability
High conductivity
Passed authentications of ISO9001:2008 ; API
Xinmi Wanli Industry Development Co., LTD isone of China's leading companies who has owned patent technology in producing and exporting ceramic proppants used in the hydraulic fracturing process to increase the productivity of oil and gas wells.
1. Brand Name: Wanli
2. Type: Fracturing Ceramic Proppant
3. Place of Origin: Henan, China (Mainland)
4. Application: Oil & Gas Mining
5. Material: Alumina Ceramic
6. Density: Light-weight, Medium Density, High Density
7. Standards: SY/T5108-2006, SY/T6302-1997
8. Authentications: ISO9001:2008
9. Test Reports: Stim-Lab test report, Frac Tech laboratories test report, Ceramic Proppant Evaluation Lab in Langfang Branch of PetroChina
10. Modo Number: 20-40, 30-50, 40-70, etc
11. We can also produc ceramic proppants of different specifications according to clients' particular requirements.
The ceramic proppant that are produced by Xinmi Wanli Industry Development Co., LTD is the necessities in oil (gas) hydraulic fracturing technology development and mining, and it plays a tremendous role in the increasing production in oil (gas) field.
Fracturing proppant can be widely used in hydraulic fracturing Wells, high-pressure oil layer fracturing. Base on high quality of Bauxite which are well grinding, mixed with various additive, then refined, granulation. According to the testing of Stim-Lab, Frac Tech Laboratory and Reservoir Stimulation Laboratory of RIPED-Langfang PetroChina, our products are all reached the standard of SY/T5108-2006, SY/T6302-1997, in the leading position of this industry.
Product categories:
By compression strength: 52MPa (7500psi), 69MPa (10000psi), 86MPa (12500psi), 103MPa (15000psi)
By volume density: low-density, medium-density and high-density.
By specification: 6-12 mesh, 8-16 mesh, 12-18 mesh, 12-20 mesh, 16-20 mesh, 16-30 mesh, 20-40 mesh, 30-50 mesh, 30-60 mesh, 40-60 mesh, 40-70 mesh, 70-140 mesh, etc.
Ceramic proppants of different specifications according to clients' specific requirements.
Subscribe to:
Posts (Atom)