Lubricant for drilling

Used in high angle deviated wells to lower torque and drag on the drill string

Lubricant for drilling
LUBE is a primarily used in high angle deviated wells to lower torque and drag on the drill string. It also reduces the possibility of different pressure sticking. LUBE can be used to replace environmentally harmful mineral oil and produces a drilling fluid with a greatly improved lubricity

Technical data of Lubricant
Item
Index
Flash point, °C
70-100
Reduce rate of friction, %
70%Min
Extreme pressure film strength,kg
35Min
Fluorescence grade,grade
6Max
Foaming rate %
10Max
Applied in the lowest tempreture
-20°C
Floccus
None
2. Technical data of High Performance Lubricant
Item
Index
Flash point,°C
70-100
Reduce rate of friction, %
80Min
Extreme pressure film strength, kg
80Min
Foaming rate, %
10Max
Floccus
None
TREANTMENT
LUBE is added in the 10 to 30 l/ m
3
range according to the severity of the problems experienced. It can be added through the hopper or directly to mud in the pits with good agitation conditions.

TOXICITY AND HANDLING
Special precautions are not necessary for handling, but contact with skin and eyes should be avoided. Do not take PF-LUBE internally. Bioassay information is available upon request.