T154 Polyisobutylene double succimide/ gear oil additive.

T154 Polyisobutylene double succimide
Dispersant/engine oil additive
gear oil additive
oil additive
supply qty: 900 ton

POLYISOBUTYLENE DOUBLE SUCCIMIDE

T154

BRIEF INTRODUCTION
This product is primarily used for blending cylinder oil for low speed marine engine with outside guide and high quality engine oil, especially environment-friendly internal combustion engine oil. It is red or brown liquid. The recommended dosage in oil is 2.0-4.0%.

CHARACTERISTICS
Excellent low-temperature dispersion performance
High-temperature stability
Free of chlorine, conforming to environmental requirements
Provide the lubricant with good detergency of sludge and ash
Effectively inhibit the generation of coke
Preserve alkalinity well

PRODUCT FEATURES AND TEST METHODS
ITEM
INDICE
TEST METHOD
Density (20°C), Kg/m
3
900
GB/T1884
Flash Point (open cup), °C
≥175
GB/T267
Kinematics Viscosity (100°C), mm
2
/s
170
GB/T265
Chroma (diluted)
≤6.0
GB/T6540
TBN, mg KOH/g
20
SH/T0251
Nitrogen, m%
1.2
SH/T0224
Water, m%
≤0.09
GB/T260
Impurities, m%
≤0.07
GB/T511
Clorine, m%
≤0.4
SH/T0161

PACKING AND STORAGE
Packing: The product is packed in 200 liter metal drum (net weight: 170 kg/drum).
Storage: Please refer to SH/T0164, for transportation, storage and oil blending. Keep the temperature not higher than 60°C. For long-term storage the suggested temperature is lower than 50°C. The dry, clean and ventilating warehouse is recommended.