RP013 long-term anti-rust oil

It is a thin layer of long-term anti-rust oil.
RP013
long-term anti-rust oil
RP013 is a thin layer of oil into the mold rust agent, oil-soluble corrosion inhibitor and the low viscosity high flash point mineral oil refined from the preparation of a special process, is a thin layer of long-term anti-rust oil, the product has a viscosity of small, flash points higher, dehydration replacement is good, and good resistance to salt spray and humidity, rust-proof and long, easy to clean and does not affect the sequence after processing (such as stamping, drawing and other processing).
Uses:

For steel, cast iron, copper, aluminum, galvanized sheet (cross section) and other anti-rust.
Usage:

The oil can soak, brush or spray, etc., the use of oil per liter of an area of about 40-50 square meters, more than 20% of similar products, the use of savings. Should be used in the store and stopped to avoid contamination. When oiled surface should be clean, no oil, hand sweat and moisture to ensure rust-proof quality. Avoid the mixing of water and other foreign oil.
Technical parameters:

Project
Indicators
Test Method
Appearance
Red brown transparent oily liquid
Visual
Flash point (closed) °C
≥ 180
GB 261 - 77
Spray of 5 ± 1 °C
Continuous film
GB4879 - 85B21
Replacement of water
Complete replacement
GB4879 - 85B22
Corrosion test
Steel
7 days 0

SY2752-77S
Cast iron
7 days 0
Brass
7 days 0
Humidity Test
Steel
30 days 0

GB/T2361 - 80
Cast iron
30 days 0
Brass
30 days 0
Archive rust test (steel, cast iron, brass)
More than half a year
Visual