SCC506-1 water-based cutting fluid environment

Low foaming tendency, good cleaning performance
SCC506-1
water-based cutting fluid environment
SCC506-1 use special high-performance extreme pressure additives, anti-rust compound from other additives, etc., is a high performance multi-purpose cutting / grinding fluid. When mixed with water, can form a stable transparent solution. This product has a good extreme pressure lubrication, corrosion resistance, cooling and cleaning. Has a very strong anti-microbial decomposition in different water hardness conditions, can still maintain its stability. Emulsified oil as an ordinary life of more than 3 times.
Quality index:

Project
Indicators

Test Method
Appearance
Light brown transparent viscous liquid
Visual
PH value (5% dilution)
8.5-8.8
PH value of the wide range of test paper
Corrosion (Cu Au 3h 100 °C)
Cast iron, steel
Single pass lamination 20 hours 12 hours without rust rust
GB6144
No card maximum bite load (PB.N)
≥ 750
GB/T3142
For metal
Stainless steel, cast iron, aluminum, copper, etc.
--- ---

Advantages:

* With special extreme pressure lubricant additive, can significantly reduce tool wear;
* Use water-soluble, oil-soluble rust inhibitor, rust protection equipment and parts;
* Excellent chemical and biological stability, anti-corruption capacity;
* Low foaming tendency, good cleaning performance
* Transparency is conducive to the workpiece surface processing state monitor