High Density Polyethylene (HDPE)

High Density Polyethylene (HDPE)
1.CAS No.:9002-88-4
2.HS CODE:3901200000
3.Good quality,prompt delivery
High Density Polyethylene (HDPE)

Solemnly Promises:
My factory make sure that the quality of the cargo will be exact same as the sample ,and provide technical support and wonderful after-sale service,please be assured purchase .


Specifications:
HDPE-High Density Polyethylene
CAS: 9002-88-4
Grade: Blow molding grade, injection molding grade, etc.
High-density polyethylene (HDPE) or polyethylene high-density (PEHD) is a polyethylene thermoplastic made from petroleum. It takes 1.75 kilograms of petroleum (in terms of energy and raw materials) to make one kilogram of HDPE.
Application:

Make barrela, plastic bottle and bag, make all kind of pipes, make shading net, and make cable wire-insulating.
HDPE cable material
Property
Unit
Typical Value
Mass density
g/cm 3
0.941-0.959
Melt flow Rate(190 centidegree /2.16kg)
g/10min
≤1.0
Tensile yield strength
MPa
≥19.0
Flexural modulus
Mpa
≥965
Elongation@ break
%
≥400
Impact Embrittlement temperature
centidegree
MAX -118
Dielectric Constant
100KHZ
2.32
1MHZ
2.31
Loss Tangent
100KHZ
MAX 0.0001
1MHZ
MAX 0.0001
Volume resistivity
OHM-CM
MIN 1x10 15
Application

Mainly used for the production of high toughness of the telephone,cable insulation material