FUKKOL EMULSIFIABLE AND SOLUBLE CUTTING FLUID

FK-2700 FUKKOL EMULSIFIABLE AND SOLUBLE CUTTING FLUID
1.the ratio mix with watter 1:10-15
2.Apply on non-ferrous metal working

FK-2700
FUKKOL EMULSIFIABLE AND SOLUBLE CUTTING FLUID
Description:
FK-2700 contains bio-stability additive and no nitrite, and has high mineral oil content (above 60%) and a long service cycle. With the low requirement of dilution ratio of 1:20~25, it is suitable for various types of machine tools, especially for the large processing machine. As a general purpose cutting oil, it could also save the investment.

Applications:
FK-2700 is suitable for various types of machine tools and the machining of types of metal, including some non-ferrous metal. Its high concentration metal-working fluid applies to the difficult-to-machine metal machining, such as drilling, tapping, etc.

Benefits:
-Inventory savings
-Improved machining performance
-High productivity in difficult conditions
-Prolonged service life


Typical physical properties

Appearance

Amber

Density (at 20°C)

0.873
pH@5% Dilution

8.53
Corrosion, %(200mg/L water),IP287

1a