FUKKOL Machine Lubricant Hydraulic Oil B can Recycling Use

FUKKOL Machine Lubricant Hydraulic Oil B
-Reproducible
-High viscosity
-Good Points water-borne & Filter capacity
FUKKOL Machine Lubricant Hydraulic Oil B can Recycling Use


Description
MASS OIL B can be used in circulate.Antiwear hydraulic oil designed to give long service in high output hydraulic systems that use vane,piston or gear pumps.
They can also be used for oil-lubricanted bearings and machine tool circulating bath systems.
They should not be used in specialized,pumps with silver faced bearings surface of loaded steel-on bronze contacts.
Performance Characteristics
Blended from HVI paraffinic base oils and additive to prevent wear,oxidation,corrosion and foaming.Improved degradation,permitting higher operating temperatures.
Excellent filter ability-prevent premature blocking of ultrafine filters.
Outstanding antiwear performance- under severe loading and low loading conditions.
Low friction characteristics-minimise the stick slip in critical motion system operationg at low loads and low speeds.
Good water separation properties on demulsibility-to resists the formation of emulsions.
Excellent air release and anifoam properties-to avoid cavitation and increased compressibility.





Typical specification:
Hydraulic
Oil
Density
IM.C KG
Flash Point
Open Cup.
°C
Pour
Point
°C
Viscosity
40°C
Kinematic CST
100°C
Viscosity
Index
32
0.84
224
-30
32.9
5.38
95
46
0.86
243
-30
46.0
6.6
96
68
0.88
252
-30
68.0
8.8
97