FUKKOL MOULD EJECTORPIN LUBRICANT

FUKKOL MOULD EJECTORPIN LUBRICANT
Can stand up to 160 centigrade.
dry lubricating film
FUKKOL MOULD RELEASE AGENT
(NON-PAINTABLE)


Description
FUKKOL PTFE LUBE is a premium silicone fluid that exhibits superior lubrication
and viscosity characteristics even under high temperature and pressure.
It chemically reacts with metal surfaces to provide lubrication properties
far superior than conventional silicone lubricant.

Application
Recommended for use on thimble of mould, ejector pin,
lubrication of machine surface and knives, metal, wood, glass, etc.

Characteristics
Flash Point,
<-7°C
Odour,
Pleasan,
Appearance
Clear,water-white liquid,
Vapor Density,
>Air
Solubility
Neg.In water,
Volatile%,
96%
Specific Gravity,
0.6696
Propellant,
LPG

9. Physical & Chemical Properties
Appearance & Odor:
An amber, opaque liquid with an oil of wintergreen odor.
Boiling Point (deg. C):
138 F initial
Vapor Pr. (mmHg @ 25 deg. C):
Not Determined
Density (kg/l at 15 deg. C):
0.871
Vapor Density (air = 1):
> air
pH of Undiluted Product:
Not Applicable
Solubility (water):
Negligible in water-shake well before using
Percent Volatile by Volume:
68
Evaporation Rate:
Not Determined
Viscosity (All Product Grades):
96 mm2/s @ 40 deg. C