forming oil

It can effectively protect the mold, to meet the standard parts and non-standard parts of the multi-station forming process.
MPS01
forming oil
This product is refined mineral oil based compound into the extreme pressure, oil and rust, and other special additives made with good lubricity, extreme pressure anti-wear, rust and oxidation resistance and other security . Can effectively protect the mold, to meet the standard parts and non-standard parts of the multi-station forming process.

Uses:
For titanium, stainless steel molding process can also be used for thread rolling, tapping and other processing.

Technical parameters:

Test Project
Technical parameters
Test Method
Appearance
Dark brown oil
Head Measurement
Kinematic viscosity (40 °C) mm2 / s
68 ± 10%
GB/T265
Mechanical impurities
No
GB/T511 - 88
Pb-free card to bite the largest load value (N)
≥ 780
GB/T3142
Pd sintering load value (N)
≥ 6800
GB/T3142

Performance characteristics:
value of the good lubricity, extreme pressure anti-wear
excellent rust resistance and high temperature anti-oxidation stability
the effective protection of punch (red needles) and die, to extend life, reduce overall costs.
High temperature performance, difficult to produce sludge, phosphate treatment on the resist has a good clean wire settling.
low-odor, low smoke, protect the operating environment.
Pb values: display oil lubrication, Pd values are displayed under high temperature and pressure oil extreme pressure performance, the value of common lubricants Pb 280, Pd value is 1200.
Pb, Pd showed higher value the better the performance of oil lubricated.