RPO15 -1plated anti-rust oil

When oiled surface should be clean, moisture content control in a small range to ensure rust-proof quality.
RP015-1 anti-rust oil is dehydrated into a model agent, oil-soluble corrosion inhibitor, a strong dehydrating agent and the low viscosity and high flash point mineral oils refined from the preparation of a special process, is a long-term anti-rust oil dehydration, the product has a viscosity of small high flash point, dehydration replacement particularly good, and good resistance to salt spray and humidity, rust-proof and long, easy to clean. Heavy water is ideal for occasions such as cold rolled plate or other procedure before there is water mixed situation.
Uses:

For cold rolled steel, cast iron, copper, aluminum, galvanized sheet (cross section) and other anti-rust.
Usage:

The oil can soak, brush or spray, etc., the use of oil per liter of an area of about 40-50 square meters, more than 20% of similar products, the use of savings. Should be used in the store and stopped to avoid contamination. When oiled surface should be clean, moisture content control in a small range to ensure rust-proof quality.
Technical parameters:

Project

Indicators
Test Method
Appearance
Red brown transparent oily liquid
Visual
Flash point (closed) °C
≥130 ≥ 130
GB 261 – 77 GB 261 - 77
Spray of 5 ± 1 °C
Continuous film
GB4879 - 85B21
Replacement of water
Complete replacement
GB4879 – 85B22
Corrosion test
97% RP015 +3% water
Steel
7 days 0

SY2752-77S
Cast iron
7 days 0
Brass
7 days 0
Humidity Test
97% RP015 +3% water
Steel
24 days 0

GB/T2361 - 80
Cast iron
24 days 0
Brass
24 days 0
Archive rust test (steel, cast iron, brass)
More than one year
Visual