FUKKOL H.T. PASTE

FUKKOL H.T. PASTE
1.NO OUTFLOW,NO MELTING,NO CARBONIZATION
2.Take the ejector pin oils place
3.stand 1400 degree
FUKKOL H.T. PASTE

Description:
A white non-carbonized-under-high-temperature lubricating paste for lubrication of all kinds of surfaces subject to high load,
particularly operation at low speed and/or oscillating motion and of steel and
non-ferrous metal screw ,plug and bayonet joints.

Applications:
-Anti-Selzlng non-destructive disassembly of threaded conncetions subject to high temperatures,
i.e. at internal combustion engines and turbines oven after long service time.
-Corrosion protection for nuts and bolts,sockcts and spindles in refurenes, steel-and cement mills, marine and agriculture.




Benefits:
-Best use-ONE single paste for MANY applications;
-White-coloured, non-staining, outstanding lubricity
-High pressure, low friction and low wear resistance, reliable anti-serze effect and corrosion protection.
-Economical and ecological solution for many plants and shops which have been depending on
a number of special pastes so far.
-contains organic active molybdenum additive for increased performance.

Environment:
Ecology - FUKKOL H.T PASTE is non-toxic,contains no ferrous metals and is free from graphite , molybdenum-disulphide and sulphide additives.


Typical physical properties
Appearance
White color

Basc
Synthetic oil compound with organic thickener and combination of white solid lubricants

Unworked penetration
280-320

Specific gravity
1.2g/cc at 20°C

Dropping point
None

Base oil viscosity
21mm2/s at 40°C
Temperature range
-40°C~+1400°C

Friction value
0.10-0.13
Degree of corrosion
1-90

Depth of wear
0.3um
Salt spray test
>500 hours

Four-ball tester
3800/4000N