T803A Poly-a-olefin/ Pour point depressant/ lubricant additive/ additive/ Poly-a-olefin

T803A Poly-a-olefin
Pour point depressant
lubricant additive
additive
Poly-a-olefin / supply qty:300 ton

POLY-α-OLEFIN

T803A

BRIEF INTRODUCTION
The product is primarily used in blending lubricaing oils such as internal combustion engine oil, turbine oil, gear oil and axle oil. It is orange yellow transparent thick liquid. The recommended dosage is 0.2-1.0%.

CHARACTERISTICS
Good pour point depression ability
Improve the fluidity of oil products at low temperature
Remarkably improve shear stability

PRODUCT FEATURES AND TEST METHODS
ITEM
INDICE
TEST METHOD
Flash point (open cup), °C
≥136
SH/T3536
Water, m%
≤0.03
GB/T260
Impurities, m%
≤0.06
SH/T511
Kinematic Viscosity (100°C), mm
2
/s
≤4000
GB/T265
Ash, m%
≤0.10
GB/T508
Pour Point Depression, °C
18
GB/T510

PACKING AND STORAGE
Packing: The product is packed in 200 liter metal drum.
Storage: Please refer to SH/T0164, for transportation, storage and oil blending. Keep the temperature not higher than 60°C. For long-term storage the suggested temperature is lower than 50°C. Strictly prevent water and impurities from entering. The dry, clean and ventilating warehouse is recommended.