Zinc Thread Compound FUKKOL C66

Zinc thread compound
use on tool joints, drill collars,
and all other rotary shouldered connections
C66 ZINC THREAD COMPOUND

Application:

FUKKOL C66 Zinc Thread Compound
Zinc Based Tool Joint and Drill Collar
Compounds are available in
four grades, each meeting all API and IADC material specifications. FUKKOL C66 Zinc Thread
Compound Zinc Base Compounds are made using the highest quality metallic zinc powder,
a premium petroleum base, and a FUKKOL C66 Zinc Thread Compound exclusive additive package
designed to provide unsurpassed protection to thread and shoulder surfaces.

FUKKOL C66 Zinc Thread Compound
HT are recommended for use on tool joints, drill collars,

and all other rotary shouldered connections
. They may be used in
deep or shallow drilling, on
hard formations, for directional drilling, or for breaking in new tool joints
. API and IADC
recommends a compound of from 40% - 60% metallic zinc for use on tool joints and on drill
collar connections.FUKKOL C66 Zinc Thread Compound is commonly used for shallow drilling and
on tool joints. It is also used on drill pipe as a storage compound. FUKKOL C66 Zinc Thread Compound
is the most widely accepted and used compound on the complete drill string. When a single compound
is used on drill pipe and drill collars it is most often FUKKOL C66 Zinc Thread Compound It may
also be used on rotary connections as a storage compound.

FUKKOL C66 Zinc Thread Compound is normally used for hard and deep formation drilling and on drill collars.
FUKKOL C66 Zinc Thread Compound is recommended for drilling in geothermal and other high temperature
formations. FUKKOL C66 Zinc Thread Compound Geothermal Grade is designed to resist the drying effects
associated with high temperature drilling. FUKKOL C66 Zinc Thread Compound Geothermal Grade is designed
to protect tool joints, drill collars and other rotary shoulder connections use in high temperature drilling conditions
thus assuring ease of breakout on the connection.


TYPICAL SPECIFICATIONS:
Base Thickener ---- 12 Hydroxy-Lithium
Base Oil Viscosity,
SUS @ 100EF D-445 940
SUS @ 210EF D-445 70
Worked Penetration D-217 290-310
Drop Point, EF (ASTM D-566) D-566 300
Flash Point, EF (ASTM D-92) D-92 430
Pour Point, EF (ASTM D-97) D-97 0
Brushability (minimum), EF ---- 15